New to folding , Points/ work type question

If you're new to FAH and need help getting started or you have very basic questions, start here.

Moderators: Site Moderators, FAHC Science Team

Post Reply
bollix47
Posts: 2963
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: New to folding , Points/ work type question

Post by bollix47 »

Try adding client-type advanced to one or both of your GPU slots to see if there's a change in assignment:

Using FAHControl (aka Advanced Control) Configure > Slots > gpu? > Edit > Add

Name: client-type
Value: advanced

OK > OK > Save.

It may or may not help you in your attempt to get a core 17 work unit but it's probably worth a try.
Image
Top
bob_b
Posts: 32
Joined: Mon Aug 25, 2014 1:35 pm
Hardware configuration: I7-3970X Extreme, 6 core (overclocked to 4.5Mhz all cores ) 32Gb 1888mhz Ram, Intel 730 480Gb SSD, Two Zortac Amp! GTX 780 Ti's (overclocked to 1175 Mhz) Water cooled Windows 8.1

Re: New to folding , Points/ work type question

Post by bob_b »

Ty Bollix47

I received care_17 Wu's for each of my DPU's and my PPD = 502,150 if i run them and the CPU folding all day

So I guess it's all set up right. no error's and temps are reasonable :)
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: New to folding , Points/ work type question

Post by 7im »

Full disclosure, the Advanced setting is for late stage beta testing work units. This only changes the risk value you are willing to take while folding, it does not specifically request core_17 work units. The mix of work units types changes as the testing needs change. Next week could be all core_18 work units, or none at all, and you'll be back to core_15s. Just be aware you may have to change your client type again in the future. The client type setting is not set and forget.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
bob_b
Posts: 32
Joined: Mon Aug 25, 2014 1:35 pm
Hardware configuration: I7-3970X Extreme, 6 core (overclocked to 4.5Mhz all cores ) 32Gb 1888mhz Ram, Intel 730 480Gb SSD, Two Zortac Amp! GTX 780 Ti's (overclocked to 1175 Mhz) Water cooled Windows 8.1

Re: New to folding , Points/ work type question

Post by bob_b »

Ty, i'll remove the edit tomorrow... Just wanted to make sure all my software and hardware were functioning properly. Going forward my machine will fold whatever it gets given
Top
bob_b
Posts: 32
Joined: Mon Aug 25, 2014 1:35 pm
Hardware configuration: I7-3970X Extreme, 6 core (overclocked to 4.5Mhz all cores ) 32Gb 1888mhz Ram, Intel 730 480Gb SSD, Two Zortac Amp! GTX 780 Ti's (overclocked to 1175 Mhz) Water cooled Windows 8.1

Re: New to folding , Points/ work type question

Post by bob_b »

Ok next challenge.... all was going well then the server sent me a core_18 Wu and mu GPU won't fold :(

Hardware setup unchanged

Code: Select all

10:44:07:WU01:FS02:Assigned to work server 171.67.108.52
10:44:07:WU01:FS02:Requesting new work unit for slot 02: RUNNING gpu:1:GK110 [GeForce GTX 780 Ti] from 171.67.108.52
10:44:08:WU01:FS02:Downloading 1.52MiB
10:44:10:WU01:FS02:Download complete
10:44:10:WU01:FS02:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9201 run:609 clone:0 gen:133 core:0x17 unit:0x000000ac6652edc45399edf6f737c25e
10:46:02:WU02:FS00:0xa3:Completed 350000 out of 500000 steps  (70%)
10:46:22:WU00:FS02:0x17:Completed 5000000 out of 5000000 steps (100%)
10:46:25:WU00:FS02:0x17:Saving result file logfile_01.txt
10:46:25:WU00:FS02:0x17:Saving result file checkpointState.xml
10:46:26:WU00:FS02:0x17:Saving result file checkpt.crc
10:46:26:WU00:FS02:0x17:Saving result file log.txt
10:46:26:WU00:FS02:0x17:Saving result file positions.xtc
10:46:28:WU00:FS02:0x17:Folding@home Core Shutdown: FINISHED_UNIT
10:46:28:WU00:FS02:FahCore returned: FINISHED_UNIT (100 = 0x64)
10:46:28:WU00:FS02:Sending unit results: id:00 state:SEND error:NO_ERROR project:9201 run:454 clone:1 gen:39 core:0x17 unit:0x000000566652edc45399e7e33b52d96b
10:46:28:WU00:FS02:Uploading 8.41MiB to 171.67.108.52
10:46:28:WU01:FS02:Starting
10:46:28:WU01:FS02:Core PID:1112
10:46:28:WU01:FS02:FahCore 0x17 started
10:46:29:WU01:FS02:0x17:*********************** Log Started 2014-08-27T10:46:28Z ***********************
10:46:29:WU01:FS02:0x17:Project: 9201 (Run 609, Clone 0, Gen 133)
10:46:29:WU01:FS02:0x17:Unit: 0x000000ac6652edc45399edf6f737c25e
10:46:29:WU01:FS02:0x17:CPU: 0x00000000000000000000000000000000
10:46:29:WU01:FS02:0x17:Machine: 2
10:46:29:WU01:FS02:0x17:Reading tar file state.xml
10:46:29:WU01:FS02:0x17:Reading tar file system.xml
10:46:29:WU01:FS02:0x17:Reading tar file integrator.xml
10:46:29:WU01:FS02:0x17:Reading tar file core.xml
10:46:29:WU01:FS02:0x17:Digital signatures verified
10:46:29:WU01:FS02:0x17:Folding@home GPU core17
10:46:29:WU01:FS02:0x17:Version 0.0.52
10:46:34:WU00:FS02:Upload 22.28%
10:46:40:WU00:FS02:Upload 46.05%
10:46:46:WU00:FS02:Upload 69.82%
10:46:52:WU00:FS02:Upload 93.59%
10:46:57:WU01:FS02:0x17:Completed 0 out of 5000000 steps (0%)
10:46:57:WU01:FS02:0x17:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
10:46:57:WU00:FS02:Upload complete
10:46:57:WU00:FS02:Server responded WORK_ACK (400)
10:46:57:WU00:FS02:Final credit estimate, 32093.00 points
10:46:57:WU00:FS02:Cleaning up
10:49:12:WU01:FS02:0x17:Completed 50000 out of 5000000 steps (1%)
10:51:26:WU01:FS02:0x17:Completed 100000 out of 5000000 steps (2%)
10:51:44:WU02:FS00:0xa3:Completed 355000 out of 500000 steps  (71%)
10:53:41:WU01:FS02:0x17:Completed 150000 out of 5000000 steps (3%)
10:55:56:WU01:FS02:0x17:Completed 200000 out of 5000000 steps (4%)
10:57:25:WU02:FS00:0xa3:Completed 360000 out of 500000 steps  (72%)
10:58:11:WU01:FS02:0x17:Completed 250000 out of 5000000 steps (5%)
11:00:26:WU01:FS02:0x17:Completed 300000 out of 5000000 steps (6%)
11:02:41:WU01:FS02:0x17:Completed 350000 out of 5000000 steps (7%)
11:03:06:WU02:FS00:0xa3:Completed 365000 out of 500000 steps  (73%)
11:04:55:WU01:FS02:0x17:Completed 400000 out of 5000000 steps (8%)
11:07:10:WU01:FS02:0x17:Completed 450000 out of 5000000 steps (9%)
11:08:47:WU02:FS00:0xa3:Completed 370000 out of 500000 steps  (74%)
11:09:25:WU01:FS02:0x17:Completed 500000 out of 5000000 steps (10%)
11:11:40:WU01:FS02:0x17:Completed 550000 out of 5000000 steps (11%)
11:13:55:WU01:FS02:0x17:Completed 600000 out of 5000000 steps (12%)
11:14:28:WU02:FS00:0xa3:Completed 375000 out of 500000 steps  (75%)
11:16:10:WU01:FS02:0x17:Completed 650000 out of 5000000 steps (13%)
11:18:25:WU01:FS02:0x17:Completed 700000 out of 5000000 steps (14%)
11:20:09:WU02:FS00:0xa3:Completed 380000 out of 500000 steps  (76%)
11:20:40:WU01:FS02:0x17:Completed 750000 out of 5000000 steps (15%)
11:22:48:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_18.fah
11:22:48:ERROR:WU03:FS01:Exception: Failed to access core package.
Mod edit: added Code tags to log
Top
bob_b
Posts: 32
Joined: Mon Aug 25, 2014 1:35 pm
Hardware configuration: I7-3970X Extreme, 6 core (overclocked to 4.5Mhz all cores ) 32Gb 1888mhz Ram, Intel 730 480Gb SSD, Two Zortac Amp! GTX 780 Ti's (overclocked to 1175 Mhz) Water cooled Windows 8.1

Re: New to folding , Points/ work type question

Post by bob_b »

******************************* Date: 2014-08-27 *******************************
02:43:24:ERROR:WU03:FS01:Exception: Failed to access core package.
02:44:24:ERROR:WU03:FS01:Exception: Failed to access core package.
02:46:01:ERROR:WU03:FS01:Exception: Failed to access core package.
02:48:38:ERROR:WU03:FS01:Exception: Failed to access core package.
02:52:52:ERROR:WU03:FS01:Exception: Failed to access core package.
02:59:43:ERROR:WU03:FS01:Exception: Failed to access core package.
03:10:49:ERROR:WU03:FS01:Exception: Failed to access core package.
03:28:46:ERROR:WU03:FS01:Exception: Failed to access core package.
03:57:48:ERROR:WU03:FS01:Exception: Failed to access core package.
04:44:47:ERROR:WU03:FS01:Exception: Failed to access core package.
06:00:48:ERROR:WU03:FS01:Exception: Failed to access core package.
******************************* Date: 2014-08-27 *******************************
08:03:48:ERROR:WU03:FS01:Exception: Failed to access core package.
11:22:48:ERROR:WU03:FS01:Exception: Failed to access core package.
******************************* Date: 2014-08-27 *******************************
Top
Joe_H
Site Admin
Posts: 7939
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: New to folding , Points/ work type question

Post by Joe_H »

The download for the Core_18 WU is not shown, and must be farther back in the log. FAHControl can filter the log by folding slot, can you post the portion of the log showing the download and the beginning of attempts to download the core. We need that information to see which project and server are involved, it appears there is a bad server setting and you should not have been assigned a Core_18 WU. My understanding is that Core_18 is still in beta testing, and have not seen a notice that has changed. The manager for the server will be contacted to check the settings; or if the project has moved from beta to advanced, to supply the core in the download location.

Edit: Shortly after first posting this response, an announcement was posted that some Core_18 projects were moving to advanced. If the core still has not downloaded for your client, please do post the log so we can let the manager know to get the core in place for downloads.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Top
kyleb
Pande Group Member
Posts: 272
Joined: Fri Mar 12, 2010 8:53 pm

Re: New to folding , Points/ work type question

Post by kyleb »

Working on the core18 issue now, sorry about that.
Top
bob_b
Posts: 32
Joined: Mon Aug 25, 2014 1:35 pm
Hardware configuration: I7-3970X Extreme, 6 core (overclocked to 4.5Mhz all cores ) 32Gb 1888mhz Ram, Intel 730 480Gb SSD, Two Zortac Amp! GTX 780 Ti's (overclocked to 1175 Mhz) Water cooled Windows 8.1

Re: New to folding , Points/ work type question

Post by bob_b »

02:43:20:WU03:FS01:Assigned to work server 140.163.4.235
02:43:20:WU03:FS01:Requesting new work unit for slot 01: RUNNING gpu:0:GK110 [GeForce GTX 780 Ti] from 140.163.4.235
02:43:21:WU03:FS01:Downloading 4.83MiB
02:43:23:WU03:FS01:Download complete
02:43:23:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:10473 run:0 clone:122 gen:44 core:0x18 unit:0x0000002d538b3dbb53bec2ac06e2310d
02:43:23:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:43:24:ERROR:WU03:FS01:Exception: Failed to access core package.
02:43:34:WU00:FS00:0xa4:Completed 1500000 out of 5000000 steps (30%)
02:43:38:WU01:FS01:0x17:Saving result file logfile_01.txt
02:43:38:WU01:FS01:0x17:Saving result file checkpointState.xml
02:43:40:WU01:FS01:0x17:Saving result file checkpt.crc
02:43:40:WU01:FS01:0x17:Saving result file log.txt
02:43:40:WU01:FS01:0x17:Saving result file positions.xtc
02:43:42:WU01:FS01:0x17:Folding@home Core Shutdown: FINISHED_UNIT
02:43:43:WU01:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
02:43:43:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:13001 run:295 clone:2 gen:19 core:0x17 unit:0x0000001f538b3db75328a35a8935866f
02:43:43:WU01:FS01:Uploading 12.83MiB to 140.163.4.231
02:43:49:WU01:FS01:Upload 14.62%
02:43:55:WU01:FS01:Upload 30.21%
02:44:01:WU01:FS01:Upload 45.32%
02:44:07:WU01:FS01:Upload 60.91%
02:44:13:WU01:FS01:Upload 76.01%
02:44:19:WU01:FS01:Upload 91.60%
02:44:23:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:44:24:ERROR:WU03:FS01:Exception: Failed to access core package.
02:44:32:WU01:FS01:Upload complete
02:44:33:WU01:FS01:Server responded WORK_ACK (400)
02:44:33:WU01:FS01:Final credit estimate, 84681.00 points
02:44:33:WU01:FS01:Cleaning up
02:44:35:WU02:FS02:0x17:Completed 4750000 out of 5000000 steps (95%)
02:44:43:WU00:FS00:0xa4:Completed 1550000 out of 5000000 steps (31%)
02:45:52:WU00:FS00:0xa4:Completed 1600000 out of 5000000 steps (32%)
02:46:00:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:46:01:ERROR:WU03:FS01:Exception: Failed to access core package.
02:47:02:WU00:FS00:0xa4:Completed 1650000 out of 5000000 steps (33%)
02:48:11:WU00:FS00:0xa4:Completed 1700000 out of 5000000 steps (34%)
02:48:38:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:48:38:ERROR:WU03:FS01:Exception: Failed to access core package.
02:49:20:WU00:FS00:0xa4:Completed 1750000 out of 5000000 steps (35%)
02:50:30:WU00:FS00:0xa4:Completed 1800000 out of 5000000 steps (36%)
02:50:48:WU02:FS02:0x17:Completed 4800000 out of 5000000 steps (96%)
02:51:39:WU00:FS00:0xa4:Completed 1850000 out of 5000000 steps (37%)
02:52:48:WU00:FS00:0xa4:Completed 1900000 out of 5000000 steps (38%)
02:52:52:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:52:52:ERROR:WU03:FS01:Exception: Failed to access core package.
02:53:57:WU00:FS00:0xa4:Completed 1950000 out of 5000000 steps (39%)
02:55:06:WU00:FS00:0xa4:Completed 2000000 out of 5000000 steps (40%)
02:56:15:WU00:FS00:0xa4:Completed 2050000 out of 5000000 steps (41%)
02:56:39:WU02:FS02:0x17:Completed 4850000 out of 5000000 steps (97%)
02:57:24:WU00:FS00:0xa4:Completed 2100000 out of 5000000 steps (42%)
02:58:34:WU00:FS00:0xa4:Completed 2150000 out of 5000000 steps (43%)
02:59:43:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:59:43:ERROR:WU03:FS01:Exception: Failed to access core package.
02:59:44:WU00:FS00:0xa4:Completed 2200000 out of 5000000 steps (44%)
03:00:54:WU00:FS00:0xa4:Completed 2250000 out of 5000000 steps (45%)
03:02:03:WU00:FS00:0xa4:Completed 2300000 out of 5000000 steps (46%)
03:02:49:WU02:FS02:0x17:Completed 4900000 out of 5000000 steps (98%)
03:03:12:WU00:FS00:0xa4:Completed 2350000 out of 5000000 steps (47%)
03:04:22:WU00:FS00:0xa4:Completed 2400000 out of 5000000 steps (48%)
03:05:31:WU00:FS00:0xa4:Completed 2450000 out of 5000000 steps (49%)
03:06:40:WU00:FS00:0xa4:Completed 2500000 out of 5000000 steps (50%)
03:06:53:Saving configuration to config.xml
Top
bob_b
Posts: 32
Joined: Mon Aug 25, 2014 1:35 pm
Hardware configuration: I7-3970X Extreme, 6 core (overclocked to 4.5Mhz all cores ) 32Gb 1888mhz Ram, Intel 730 480Gb SSD, Two Zortac Amp! GTX 780 Ti's (overclocked to 1175 Mhz) Water cooled Windows 8.1

Re: New to folding , Points/ work type question

Post by bob_b »

just that GPU slot:


02:43:20:WU03:FS01:Assigned to work server 140.163.4.235
02:43:20:WU03:FS01:Requesting new work unit for slot 01: RUNNING gpu:0:GK110 [GeForce GTX 780 Ti] from 140.163.4.235
02:43:21:WU03:FS01:Downloading 4.83MiB
02:43:23:WU03:FS01:Download complete
02:43:23:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:10473 run:0 clone:122 gen:44 core:0x18 unit:0x0000002d538b3dbb53bec2ac06e2310d
02:43:23:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:43:24:ERROR:WU03:FS01:Exception: Failed to access core package.
02:43:38:WU01:FS01:0x17:Saving result file logfile_01.txt
02:43:38:WU01:FS01:0x17:Saving result file checkpointState.xml
02:43:40:WU01:FS01:0x17:Saving result file checkpt.crc
02:43:40:WU01:FS01:0x17:Saving result file log.txt
02:43:40:WU01:FS01:0x17:Saving result file positions.xtc
02:43:42:WU01:FS01:0x17:Folding@home Core Shutdown: FINISHED_UNIT
02:43:43:WU01:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
02:43:43:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:13001 run:295 clone:2 gen:19 core:0x17 unit:0x0000001f538b3db75328a35a8935866f
02:43:43:WU01:FS01:Uploading 12.83MiB to 140.163.4.231
02:43:49:WU01:FS01:Upload 14.62%
02:43:55:WU01:FS01:Upload 30.21%
02:44:01:WU01:FS01:Upload 45.32%
02:44:07:WU01:FS01:Upload 60.91%
02:44:13:WU01:FS01:Upload 76.01%
02:44:19:WU01:FS01:Upload 91.60%
02:44:23:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:44:24:ERROR:WU03:FS01:Exception: Failed to access core package.
02:44:32:WU01:FS01:Upload complete
02:44:33:WU01:FS01:Server responded WORK_ACK (400)
02:44:33:WU01:FS01:Final credit estimate, 84681.00 points
02:44:33:WU01:FS01:Cleaning up
02:46:00:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:46:01:ERROR:WU03:FS01:Exception: Failed to access core package.
02:48:38:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:48:38:ERROR:WU03:FS01:Exception: Failed to access core package.
02:52:52:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:52:52:ERROR:WU03:FS01:Exception: Failed to access core package.
02:59:43:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
02:59:43:ERROR:WU03:FS01:Exception: Failed to access core package.
03:10:49:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
03:10:49:ERROR:WU03:FS01:Exception: Failed to access core package.
03:28:46:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
03:28:46:ERROR:WU03:FS01:Exception: Failed to access core package.
03:57:48:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
03:57:48:ERROR:WU03:FS01:Exception: Failed to access core package.
04:44:47:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
04:44:47:ERROR:WU03:FS01:Exception: Failed to access core package.
06:00:48:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
06:00:48:ERROR:WU03:FS01:Exception: Failed to access core package.
******************************* Date: 2014-08-27 *******************************
08:03:47:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
08:03:48:ERROR:WU03:FS01:Exception: Failed to access core package.
11:22:48:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
11:22:48:ERROR:WU03:FS01:Exception: Failed to access core package.
11:45:40:FS01:Finishing
******************************* Date: 2014-08-27 *******************************
16:44:48:WU03:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
16:44:48:ERROR:WU03:FS01:Exception: Failed to access core package.
Top
P5-133XL
Posts: 2948
Joined: Sun Dec 02, 2007 4:36 am
Hardware configuration: Machine #1:

Intel Q9450; 2x2GB=8GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460; Windows Server 2008 X64 (SP1).

Machine #2:

Intel Q6600; 2x2GB=4GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460 video card; Windows 7 X64.

Machine 3:

Dell Dimension 8400, 3.2GHz P4 4x512GB Ram, Video card GTX 460, Windows 7 X32

I am currently folding just on the 5x GTX 460's for aprox. 70K PPD
Location: Salem. OR USA

Re: New to folding , Points/ work type question

Post by P5-133XL »

The Core_18 problem is being addressed. See viewtopic.php?f=24&t=26708#p268285
Image
Top
bob_b
Posts: 32
Joined: Mon Aug 25, 2014 1:35 pm
Hardware configuration: I7-3970X Extreme, 6 core (overclocked to 4.5Mhz all cores ) 32Gb 1888mhz Ram, Intel 730 480Gb SSD, Two Zortac Amp! GTX 780 Ti's (overclocked to 1175 Mhz) Water cooled Windows 8.1

Re: New to folding , Points/ work type question

Post by bob_b »

Thank you all. Like i said in the beginning of this note, I am new to this, I won this Rig with a lot of computing cycles and want to do something good with it. I'll be patient, learn the ropes and hopefully down the road help the next new person

Question: So one of my GPU's is stuck now.... is there a way to reset it to allow a different WU to be assigned or do i leave it alone and when Core_18 is working it will start working again on it's own without having me do anything ?
Top
P5-133XL
Posts: 2948
Joined: Sun Dec 02, 2007 4:36 am
Hardware configuration: Machine #1:

Intel Q9450; 2x2GB=8GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460; Windows Server 2008 X64 (SP1).

Machine #2:

Intel Q6600; 2x2GB=4GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460 video card; Windows 7 X64.

Machine 3:

Dell Dimension 8400, 3.2GHz P4 4x512GB Ram, Video card GTX 460, Windows 7 X32

I am currently folding just on the 5x GTX 460's for aprox. 70K PPD
Location: Salem. OR USA

Re: New to folding , Points/ work type question

Post by P5-133XL »

Try pausing the slot and then unpause it. since the Core_18's are no longer being assigned it should fix the issue. It should also fix itself if you leave it alone but that may take a while.
Image
Top
Joe_H
Site Admin
Posts: 7939
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: New to folding , Points/ work type question

Post by Joe_H »

It will take more than just pausing and unpausing the slot since the WU for Core_18 has already been downloaded. As I recall from the last time a similar issue came up, you will probably have to delete the GPU slot and recreate it. In addition you might have to remove the downloaded WU from your work folder as it could be retained by the client to run on the other GPU slot.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Top
kyleb
Pande Group Member
Posts: 272
Joined: Fri Mar 12, 2010 8:53 pm

Re: New to folding , Points/ work type question

Post by kyleb »

Sorry about the issue on the Core18. The core should now be available.
Top
Post Reply

Return to “New Donors start here”