P6900 which 70% of the time until deadline but no bonus

Moderators: Site Moderators, FAHC Science Team

Post Reply
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

P6900 which 70% of the time until deadline but no bonus

Post by -alias- »

Submitted about five hours ago a P6900 which 70% of the time until deadline remained, but was only credited 7164p. Ie. I received no bonus. Is perhaps the bonus counter at Stanford out of order?

Log:

Code: Select all

[13:40:54] Completed 247500 out of 250000 steps (99%)
[14:06:51] Completed 250000 out of 250000 steps (100%)
[14:07:04] DynamicWrapper: Finished Work Unit: sleep=10000
[14:07:14]
[14:07:14] Finished Work Unit:
[14:07:14] - Reading up to 52713120 from "work/wudata_06.trr": Read 52713120
[14:07:15] trr file hash check passed.
[14:07:15] - Reading up to 46991448 from "work/wudata_06.xtc": Read 46991448
[14:07:15] xtc file hash check passed.
[14:07:15] edr file hash check passed.
[14:07:15] logfile size: 243057
[14:07:15] Leaving Run
[14:07:18] - Writing 100115565 bytes of core data to disk...
[14:07:20] ... Done.
[14:07:36] - Shutting down core
[14:07:36]
[14:07:36] Folding@home Core Shutdown: FINISHED_UNIT
[14:07:40] CoreStatus = 64 (100)
[14:07:40] Unit 6 finished with 70 percent of time to deadline remaining.
[14:07:40] Updated performance fraction: 0.912905
[14:07:43] Sending work to server
[14:07:43] Project: 6900 (Run 22, Clone 1, Gen 36)
[14:07:43] + Attempting to send results [September 7 14:07:43 UTC]
[14:07:43] - Reading file work/wuresults_06.dat from core
[14:07:43] (Read 100115565 bytes from disk)
[14:07:43] Connecting to http://130.237.232.141:8080/
[14:13:17] Posted data.
[14:13:17] Initial: 0000; - Uploaded at ~292 kB/s
[14:13:17] - Averaged speed for that direction ~209 kB/s
[14:13:17] + Results successfully sent
[14:13:17] Thank you for your contribution to Folding@Home.
[14:13:17] + Number of Units Completed: 75
The server where it happened is http://130.237.232.141 where there has been some trouble with since 03 September. I lost then three P6900 which could not be uploaded.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: P6900 which 70% of the time until deadline but no bonus

Post by 7im »

Please post the section of the log when the WU was downloaded.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

Re: P6900 which 70% of the time until deadline but no bonus

Post by -alias- »

Posting entire history of the specific WU.

Code: Select all

[18:47:10] Trying to send all finished work units
[18:47:10] + No unsent completed units remaining.
[18:47:10] - Preparing to get new work unit...
[18:47:10] Cleaning up work directory
[18:47:10] + Attempting to get work packet
[18:47:10] Passkey found
[18:47:10] - Will indicate memory of 8168 MB
[18:47:10] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 7
[18:47:10] - Connecting to assignment server
[18:47:10] Connecting to http://assign.stanford.edu:8080/
[18:47:11] Posted data.
[18:47:11] Initial: ED82; - Successful: assigned to (130.237.232.141).
[18:47:11] + News From Folding@Home: Welcome to Folding@Home
[18:47:12] Loaded queue successfully.
[18:47:12] Sent data
[18:47:12] Connecting to http://130.237.232.141:8080/
[18:47:18] Posted data.
[18:47:18] Initial: 0000; - Receiving payload (expected size: 24867494)
[18:47:35] - Downloaded at ~1428 kB/s
[18:47:35] - Averaged speed for that direction ~463 kB/s
[18:47:35] + Received work.
[18:47:36] Trying to send all finished work units
[18:47:36] + No unsent completed units remaining.
[18:47:36] + Closed connections
[18:47:36] 
[18:47:36] + Processing work unit
[18:47:36] Core required: FahCore_a5.exe
[18:47:36] Core not found.
[18:47:36] - Core is not present or corrupted.
[18:47:36] - Attempting to download new core...
[18:47:36] + Downloading new core: FahCore_a5.exe
[18:47:36] Downloading core (/~pande/Win32/x86/Core_a5.fah from www.stanford.edu)
[18:47:36] Initial: AFDE; + 10240 bytes downloaded
[18:47:37] Initial: F4F5; + 20480 bytes downloaded
[18:47:37] Initial: 63FF; + 30720 bytes downloaded
[18:47:37] Initial: 0CF7; + 40960 bytes downloaded
[18:47:37] Initial: E3F7; + 51200 bytes downloaded
[18:47:37] Initial: 1C48; + 61440 bytes downloaded
[18:47:37] Initial: E8C4; + 71680 bytes downloaded
[18:47:37] Initial: 6B58; + 81920 bytes downloaded
[18:47:37] Initial: AC39; + 92160 bytes downloaded
[18:47:37] Initial: 5ECC; + 102400 bytes downloaded
[18:47:37] Initial: CB6F; + 112640 bytes downloaded
[18:47:38] Initial: FE27; + 122880 bytes downloaded
[18:47:38] Initial: B0B5; + 133120 bytes downloaded
[18:47:38] Initial: 4594; + 143360 bytes downloaded
[18:47:38] Initial: 02B9; + 153600 bytes downloaded
[18:47:38] Initial: FA02; + 163840 bytes downloaded
[18:47:38] Initial: 909E; + 174080 bytes downloaded
[18:47:38] Initial: 535D; + 184320 bytes downloaded
[18:47:38] Initial: 75DC; + 194560 bytes downloaded
[18:47:38] Initial: 1178; + 204800 bytes downloaded
[18:47:38] Initial: B1F2; + 215040 bytes downloaded
[18:47:38] Initial: 92EF; + 225280 bytes downloaded
[18:47:38] Initial: C4CD; + 235520 bytes downloaded
[18:47:39] Initial: 3AC8; + 245760 bytes downloaded
[18:47:39] Initial: 1E6D; + 256000 bytes downloaded
[18:47:39] Initial: B4B6; + 266240 bytes downloaded
[18:47:39] Initial: 25DB; + 276480 bytes downloaded
[18:47:39] Initial: 9F5E; + 286720 bytes downloaded
[18:47:39] Initial: E708; + 296960 bytes downloaded
[18:47:39] Initial: 2132; + 307200 bytes downloaded
[18:47:39] Initial: 0E91; + 317440 bytes downloaded
[18:47:40] Initial: ECF5; + 327680 bytes downloaded
[18:47:41] Initial: 46E9; + 337920 bytes downloaded
[18:47:41] Initial: 4EC7; + 348160 bytes downloaded
[18:47:41] Initial: A8D8; + 358400 bytes downloaded
[18:47:41] Initial: BFF9; + 368640 bytes downloaded
[18:47:41] Initial: 313A; + 378880 bytes downloaded
[18:47:41] Initial: A144; + 389120 bytes downloaded
[18:47:41] Initial: 6A15; + 399360 bytes downloaded
[18:47:41] Initial: 463F; + 409600 bytes downloaded
[18:47:42] Initial: F652; + 419840 bytes downloaded
[18:47:42] Initial: 9518; + 430080 bytes downloaded
[18:47:42] Initial: 83A1; + 440320 bytes downloaded
[18:47:42] Initial: C5E3; + 450560 bytes downloaded
[18:47:42] Initial: 5CB4; + 460800 bytes downloaded
[18:47:42] Initial: F766; + 471040 bytes downloaded
[18:47:42] Initial: 5BA7; + 481280 bytes downloaded
[18:47:42] Initial: 64F5; + 491520 bytes downloaded
[18:47:42] Initial: 7A07; + 501760 bytes downloaded
[18:47:42] Initial: 7A42; + 512000 bytes downloaded
[18:47:42] Initial: 8F53; + 522240 bytes downloaded
[18:47:42] Initial: D091; + 532480 bytes downloaded
[18:47:42] Initial: 735E; + 542720 bytes downloaded
[18:47:43] Initial: D13C; + 552960 bytes downloaded
[18:47:43] Initial: 02A4; + 563200 bytes downloaded
[18:47:43] Initial: 8CB0; + 573440 bytes downloaded
[18:47:43] Initial: 5E50; + 583680 bytes downloaded
[18:47:43] Initial: 8641; + 593920 bytes downloaded
[18:47:43] Initial: 5841; + 604160 bytes downloaded
[18:47:43] Initial: 01C9; + 614400 bytes downloaded
[18:47:43] Initial: F3FD; + 624640 bytes downloaded
[18:47:43] Initial: E684; + 634880 bytes downloaded
[18:47:43] Initial: AF55; + 645120 bytes downloaded
[18:47:43] Initial: 0A6F; + 655360 bytes downloaded
[18:47:43] Initial: 2C92; + 665600 bytes downloaded
[18:47:44] Initial: C35F; + 675840 bytes downloaded
[18:47:44] Initial: CC1A; + 686080 bytes downloaded
[18:47:44] Initial: 2690; + 696320 bytes downloaded
[18:47:44] Initial: F5B6; + 706560 bytes downloaded
[18:47:44] Initial: 09B3; + 716800 bytes downloaded
[18:47:44] Initial: 798D; + 727040 bytes downloaded
[18:47:44] Initial: 0950; + 737280 bytes downloaded
[18:47:44] Initial: DD7C; + 747520 bytes downloaded
[18:47:44] Initial: 9D78; + 757760 bytes downloaded
[18:47:44] Initial: 8DB0; + 768000 bytes downloaded
[18:47:44] Initial: CF66; + 778240 bytes downloaded
[18:47:44] Initial: 9B7A; + 788480 bytes downloaded
[18:47:44] Initial: D545; + 798720 bytes downloaded
[18:47:44] Initial: 8F77; + 808960 bytes downloaded
[18:47:45] Initial: 70F4; + 819200 bytes downloaded
[18:47:45] Initial: DA6A; + 829440 bytes downloaded
[18:47:45] Initial: 7594; + 839680 bytes downloaded
[18:47:45] Initial: B438; + 849920 bytes downloaded
[18:47:45] Initial: 4296; + 860160 bytes downloaded
[18:47:45] Initial: 1192; + 870400 bytes downloaded
[18:47:45] Initial: BBDA; + 880640 bytes downloaded
[18:47:45] Initial: 5CCF; + 890880 bytes downloaded
[18:47:45] Initial: AB25; + 901120 bytes downloaded
[18:47:45] Initial: DBE3; + 911360 bytes downloaded
[18:47:45] Initial: 5452; + 921600 bytes downloaded
[18:47:45] Initial: C16F; + 931840 bytes downloaded
[18:47:45] Initial: 239B; + 942080 bytes downloaded
[18:47:45] Initial: EAB9; + 952320 bytes downloaded
[18:47:46] Initial: B482; + 962560 bytes downloaded
[18:47:46] Initial: 2E30; + 972800 bytes downloaded
[18:47:46] Initial: C40C; + 983040 bytes downloaded
[18:47:46] Initial: 7537; + 993280 bytes downloaded
[18:47:46] Initial: B9E7; + 1003520 bytes downloaded
[18:47:46] Initial: 0050; + 1013760 bytes downloaded
[18:47:46] Initial: 927B; + 1024000 bytes downloaded
[18:47:46] Initial: 6BF8; + 1034240 bytes downloaded
[18:47:46] Initial: 830C; + 1044480 bytes downloaded
[18:47:46] Initial: E4BB; + 1054720 bytes downloaded
[18:47:46] Initial: 06EE; + 1064960 bytes downloaded
[18:47:46] Initial: 171F; + 1075200 bytes downloaded
[18:47:47] Initial: 185B; + 1085440 bytes downloaded
[18:47:47] Initial: D791; + 1095680 bytes downloaded
[18:47:47] Initial: 0068; + 1105920 bytes downloaded
[18:47:47] Initial: 5CFB; + 1116160 bytes downloaded
[18:47:47] Initial: 0DE7; + 1126400 bytes downloaded
[18:47:47] Initial: A5E8; + 1136640 bytes downloaded
[18:47:47] Initial: 6F9F; + 1146880 bytes downloaded
[18:47:47] Initial: 6A09; + 1157120 bytes downloaded
[18:47:47] Initial: 0E3B; + 1167360 bytes downloaded
[18:47:47] Initial: 27C9; + 1177600 bytes downloaded
[18:47:47] Initial: 47CF; + 1187840 bytes downloaded
[18:47:47] Initial: 20B3; + 1198080 bytes downloaded
[18:47:47] Initial: E6AC; + 1208320 bytes downloaded
[18:47:48] Initial: 4DED; + 1218560 bytes downloaded
[18:47:48] Initial: 6D83; + 1228800 bytes downloaded
[18:47:48] Initial: 4BAD; + 1239040 bytes downloaded
[18:47:48] Initial: 6F1A; + 1249280 bytes downloaded
[18:47:48] Initial: 0EDB; + 1259520 bytes downloaded
[18:47:48] Initial: 2809; + 1269760 bytes downloaded
[18:47:48] Initial: FB9D; + 1280000 bytes downloaded
[18:47:48] Initial: 57AF; + 1290240 bytes downloaded
[18:47:48] Initial: 9A39; + 1300480 bytes downloaded
[18:47:48] Initial: 35D9; + 1310720 bytes downloaded
[18:47:48] Initial: CC92; + 1320960 bytes downloaded
[18:47:48] Initial: 8F8B; + 1331200 bytes downloaded
[18:47:48] Initial: 15C3; + 1341440 bytes downloaded
[18:47:48] Initial: 4EAF; + 1351680 bytes downloaded
[18:47:49] Initial: 25FA; + 1361920 bytes downloaded
[18:47:49] Initial: AE67; + 1372160 bytes downloaded
[18:47:49] Initial: D081; + 1382400 bytes downloaded
[18:47:49] Initial: 1861; + 1392640 bytes downloaded
[18:47:49] Initial: 0A22; + 1402880 bytes downloaded
[18:47:49] Initial: 288B; + 1413120 bytes downloaded
[18:47:49] Initial: C428; + 1423360 bytes downloaded
[18:47:49] Initial: 5EF0; + 1433600 bytes downloaded
[18:47:49] Initial: 320F; + 1443840 bytes downloaded
[18:47:49] Initial: BA43; + 1454080 bytes downloaded
[18:47:49] Initial: A353; + 1464320 bytes downloaded
[18:47:49] Initial: 4154; + 1474560 bytes downloaded
[18:47:49] Initial: 4DB0; + 1484800 bytes downloaded
[18:47:50] Initial: DA64; + 1495040 bytes downloaded
[18:47:50] Initial: DE83; + 1505280 bytes downloaded
[18:47:50] Initial: 9CE5; + 1515520 bytes downloaded
[18:47:50] Initial: ADD7; + 1525760 bytes downloaded
[18:47:50] Initial: AFBC; + 1536000 bytes downloaded
[18:47:50] Initial: 3D84; + 1546240 bytes downloaded
[18:47:50] Initial: 9639; + 1556480 bytes downloaded
[18:47:50] Initial: 2758; + 1566720 bytes downloaded
[18:47:50] Initial: 19FC; + 1576960 bytes downloaded
[18:47:50] Initial: 3D4C; + 1587200 bytes downloaded
[18:47:50] Initial: 1A95; + 1597440 bytes downloaded
[18:47:50] Initial: AC99; + 1607680 bytes downloaded
[18:47:51] Initial: 170B; + 1617920 bytes downloaded
[18:47:51] Initial: 6FB6; + 1628160 bytes downloaded
[18:47:51] Initial: 94CA; + 1638400 bytes downloaded
[18:47:51] Initial: 909C; + 1648640 bytes downloaded
[18:47:51] Initial: 86EC; + 1658880 bytes downloaded
[18:47:51] Initial: 1441; + 1669120 bytes downloaded
[18:47:51] Initial: 024C; + 1679360 bytes downloaded
[18:47:51] Initial: A322; + 1689600 bytes downloaded
[18:47:51] Initial: 19CE; + 1699840 bytes downloaded
[18:47:51] Initial: E4BD; + 1710080 bytes downloaded
[18:47:51] Initial: C267; + 1720320 bytes downloaded
[18:47:51] Initial: C788; + 1730560 bytes downloaded
[18:47:52] Initial: 4118; + 1740800 bytes downloaded
[18:47:52] Initial: 616B; + 1751040 bytes downloaded
[18:47:52] Initial: 1EBB; + 1761280 bytes downloaded
[18:47:52] Initial: C337; + 1771520 bytes downloaded
[18:47:52] Initial: 933C; + 1781760 bytes downloaded
[18:47:52] Initial: AC71; + 1792000 bytes downloaded
[18:47:52] Initial: 3B24; + 1802240 bytes downloaded
[18:47:52] Initial: 3610; + 1812480 bytes downloaded
[18:47:52] Initial: 9203; + 1822720 bytes downloaded
[18:47:52] Initial: 9C13; + 1832960 bytes downloaded
[18:47:52] Initial: 1221; + 1843200 bytes downloaded
[18:47:52] Initial: F232; + 1853440 bytes downloaded
[18:47:52] Initial: 6E72; + 1863680 bytes downloaded
[18:47:53] Initial: 0D6D; + 1873920 bytes downloaded
[18:47:53] Initial: AF9C; + 1884160 bytes downloaded
[18:47:53] Initial: 1130; + 1894400 bytes downloaded
[18:47:53] Initial: 6A35; + 1904640 bytes downloaded
[18:47:53] Initial: C2A0; + 1914880 bytes downloaded
[18:47:53] Initial: 6BB2; + 1925120 bytes downloaded
[18:47:53] Initial: 6AB0; + 1935360 bytes downloaded
[18:47:53] Initial: 13D0; + 1945600 bytes downloaded
[18:47:53] Initial: B811; + 1955840 bytes downloaded
[18:47:53] Initial: 1404; + 1966080 bytes downloaded
[18:47:53] Initial: E2C5; + 1976320 bytes downloaded
[18:47:53] Initial: 4516; + 1986560 bytes downloaded
[18:47:54] Initial: A741; + 1996800 bytes downloaded
[18:47:54] Initial: CD83; + 2007040 bytes downloaded
[18:47:54] Initial: 3234; + 2017280 bytes downloaded
[18:47:54] Initial: 78E9; + 2027520 bytes downloaded
[18:47:54] Initial: 6E37; + 2037760 bytes downloaded
[18:47:54] Initial: 9C90; + 2048000 bytes downloaded
[18:47:54] Initial: BAC7; + 2058240 bytes downloaded
[18:47:54] Initial: 1C21; + 2068480 bytes downloaded
[18:47:54] Initial: 7570; + 2078720 bytes downloaded
[18:47:54] Initial: 6C06; + 2088960 bytes downloaded
[18:47:54] Initial: DE9F; + 2099200 bytes downloaded
[18:47:54] Initial: 11EC; + 2109440 bytes downloaded
[18:47:54] Initial: 9416; + 2119680 bytes downloaded
[18:47:54] Initial: BAC3; + 2129920 bytes downloaded
[18:47:54] Initial: EE76; + 2140160 bytes downloaded
[18:47:55] Initial: C02E; + 2150400 bytes downloaded
[18:47:55] Initial: 296A; + 2160640 bytes downloaded
[18:47:55] Initial: D9C0; + 2170880 bytes downloaded
[18:47:55] Initial: 6885; + 2181120 bytes downloaded
[18:47:55] Initial: 12E1; + 2191360 bytes downloaded
[18:47:55] Initial: 1957; + 2201600 bytes downloaded
[18:47:55] Initial: 6C51; + 2211840 bytes downloaded
[18:47:55] Initial: 26C2; + 2222080 bytes downloaded
[18:47:55] Initial: E1B3; + 2232320 bytes downloaded
[18:47:55] Initial: 3601; + 2242560 bytes downloaded
[18:47:55] Initial: 6718; + 2252800 bytes downloaded
[18:47:55] Initial: B7C1; + 2263040 bytes downloaded
[18:47:56] Initial: 3A54; + 2273280 bytes downloaded
[18:47:56] Initial: F1C6; + 2283520 bytes downloaded
[18:47:56] Initial: 2CAF; + 2293760 bytes downloaded
[18:47:56] Initial: 8B23; + 2304000 bytes downloaded
[18:47:56] Initial: 89A3; + 2314240 bytes downloaded
[18:47:56] Initial: 7756; + 2324480 bytes downloaded
[18:47:56] Initial: 3904; + 2334720 bytes downloaded
[18:47:56] Initial: E0C6; + 2344960 bytes downloaded
[18:47:56] Initial: 97CE; + 2355200 bytes downloaded
[18:47:56] Initial: 1507; + 2365440 bytes downloaded
[18:47:56] Initial: 8574; + 2375680 bytes downloaded
[18:47:56] Initial: 2402; + 2385920 bytes downloaded
[18:47:57] Initial: 24EE; + 2396160 bytes downloaded
[18:47:57] Initial: 85A6; + 2406400 bytes downloaded
[18:47:57] Initial: E136; + 2416640 bytes downloaded
[18:47:57] Initial: 4EA7; + 2426880 bytes downloaded
[18:47:57] Initial: EC7C; + 2437120 bytes downloaded
[18:47:57] Initial: F0FD; + 2447360 bytes downloaded
[18:47:57] Initial: 6834; + 2457600 bytes downloaded
[18:47:57] Initial: 777C; + 2467840 bytes downloaded
[18:47:57] Initial: 4A65; + 2478080 bytes downloaded
[18:47:57] Initial: F70B; + 2488320 bytes downloaded
[18:47:57] Initial: 8E9A; + 2498560 bytes downloaded
[18:47:57] Initial: 54C4; + 2508800 bytes downloaded
[18:47:58] Initial: DAD9; + 2519040 bytes downloaded
[18:47:58] Initial: 9EF5; + 2529280 bytes downloaded
[18:47:58] Initial: 3168; + 2539520 bytes downloaded
[18:47:58] Initial: 39F3; + 2549760 bytes downloaded
[18:47:58] Initial: 8962; + 2560000 bytes downloaded
[18:47:58] Initial: 2627; + 2570240 bytes downloaded
[18:47:58] Initial: E10E; + 2580480 bytes downloaded
[18:47:58] Initial: 19E2; + 2590720 bytes downloaded
[18:47:58] Initial: A4CA; + 2600960 bytes downloaded
[18:47:58] Initial: 79C0; + 2611200 bytes downloaded
[18:47:58] Initial: CA92; + 2621440 bytes downloaded
[18:47:58] Initial: BB1D; + 2631680 bytes downloaded
[18:47:58] Initial: D8C6; + 2641920 bytes downloaded
[18:47:58] Initial: 21BF; + 2652160 bytes downloaded
[18:47:58] Initial: BC0C; + 2662400 bytes downloaded
[18:47:58] Initial: 723B; + 2672640 bytes downloaded
[18:47:59] Initial: 501A; + 2682880 bytes downloaded
[18:47:59] Initial: B343; + 2693120 bytes downloaded
[18:47:59] Initial: 9289; + 2703360 bytes downloaded
[18:47:59] Initial: B1FA; + 2713600 bytes downloaded
[18:47:59] Initial: 4E3C; + 2723840 bytes downloaded
[18:47:59] Initial: AC4A; + 2734080 bytes downloaded
[18:47:59] Initial: 9B55; + 2744320 bytes downloaded
[18:47:59] Initial: 16FD; + 2754560 bytes downloaded
[18:47:59] Initial: 560F; + 2764800 bytes downloaded
[18:47:59] Initial: 241A; + 2775040 bytes downloaded
[18:47:59] Initial: 9675; + 2785280 bytes downloaded
[18:47:59] Initial: F1B6; + 2795520 bytes downloaded
[18:48:00] Initial: D51A; + 2805760 bytes downloaded
[18:48:00] Initial: 8873; + 2816000 bytes downloaded
[18:48:00] Initial: D37C; + 2826240 bytes downloaded
[18:48:00] Initial: 8398; + 2836480 bytes downloaded
[18:48:00] Initial: B219; + 2846720 bytes downloaded
[18:48:00] Initial: DA53; + 2856960 bytes downloaded
[18:48:00] Initial: D1C3; + 2867200 bytes downloaded
[18:48:00] Initial: 70EF; + 2877440 bytes downloaded
[18:48:00] Initial: 8E2D; + 2887680 bytes downloaded
[18:48:00] Initial: A4BD; + 2897920 bytes downloaded
[18:48:00] Initial: F3C4; + 2908160 bytes downloaded
[18:48:00] Initial: 41B9; + 2918400 bytes downloaded
[18:48:01] Initial: 7A0A; + 2928640 bytes downloaded
[18:48:01] Initial: 8062; + 2938880 bytes downloaded
[18:48:01] Initial: C0C8; + 2949120 bytes downloaded
[18:48:01] Initial: 1246; + 2959360 bytes downloaded
[18:48:01] Initial: 5F2B; + 2969600 bytes downloaded
[18:48:01] Initial: 4441; + 2979840 bytes downloaded
[18:48:01] Initial: BAF3; + 2990080 bytes downloaded
[18:48:01] Initial: CE7A; + 3000320 bytes downloaded
[18:48:01] Initial: 4CB6; + 3010560 bytes downloaded
[18:48:01] Initial: 1C1D; + 3020800 bytes downloaded
[18:48:01] Initial: F4C5; + 3031040 bytes downloaded
[18:48:01] Initial: E848; + 3041280 bytes downloaded
[18:48:01] Initial: B488; + 3051520 bytes downloaded
[18:48:02] Initial: 257F; + 3061760 bytes downloaded
[18:48:02] Initial: A434; + 3072000 bytes downloaded
[18:48:02] Initial: E237; + 3082240 bytes downloaded
[18:48:02] Initial: EE1F; + 3092480 bytes downloaded
[18:48:02] Initial: 18CD; + 3102720 bytes downloaded
[18:48:02] Initial: E305; + 3112960 bytes downloaded
[18:48:02] Initial: ACB7; + 3123200 bytes downloaded
[18:48:02] Initial: 2A4A; + 3133440 bytes downloaded
[18:48:02] Initial: 520C; + 3143680 bytes downloaded
[18:48:02] Initial: 9E8C; + 3153920 bytes downloaded
[18:48:02] Initial: D02A; + 3164160 bytes downloaded
[18:48:02] Initial: 2E9C; + 3174400 bytes downloaded
[18:48:03] Initial: C367; + 3184640 bytes downloaded
[18:48:03] Initial: 4733; + 3194880 bytes downloaded
[18:48:03] Initial: CE2D; + 3205120 bytes downloaded
[18:48:03] Initial: BABA; + 3215360 bytes downloaded
[18:48:03] Initial: 298B; + 3225600 bytes downloaded
[18:48:03] Initial: 0382; + 3235840 bytes downloaded
[18:48:03] Initial: FE5E; + 3246080 bytes downloaded
[18:48:03] Initial: 2828; + 3256320 bytes downloaded
[18:48:03] Initial: 2909; + 3266560 bytes downloaded
[18:48:03] Initial: BC0E; + 3270437 bytes downloaded
[18:48:04] Verifying core Core_a5.fah...
[18:48:04] Signature is VALID
[18:48:04] 
[18:48:04] Trying to unzip core FahCore_a5.exe
[18:48:04] Decompressed FahCore_a5.exe (9326080 bytes) successfully
[18:48:09] + Core successfully engaged
[18:48:14] 
[18:48:14] + Processing work unit
[18:48:14] Core required: FahCore_a5.exe
[18:48:14] Core found.
[18:48:14] Working on queue slot 06 [September 5 18:48:14 UTC]
[18:48:14] + Working ...
[18:48:14] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 06 -np 8 -checkpoint 3 -verbose -lifeline 4444 -version 634'

[18:48:14] 
[18:48:14] *------------------------------*
[18:48:14] Folding@Home Gromacs SMP Core
[18:48:14] Version 2.27 (Mar 12, 2010)
[18:48:14] 
[18:48:14] Preparing to commence simulation
[18:48:14] - Looking at optimizations...
[18:48:14] - Created dyn
[18:48:14] - Files status OK
[18:48:18] - Expanded 24866982 -> 30796292 (decompressed 123.8 percent)
[18:48:18] Called DecompressByteArray: compressed_data_size=24866982 data_size=30796292, decompressed_data_size=30796292 diff=0
[18:48:18] - Digital signature verified
[18:48:18] 
[18:48:18] Project: 6900 (Run 22, Clone 1, Gen 36)
[18:48:18] 
[18:48:18] Assembly optimizations on if available.
[18:48:18] Entering M.D.
[18:48:25] Mapping NT from 8 to 8 
[18:48:27] Completed 0 out of 250000 steps  (0%)
[19:14:22] Completed 2500 out of 250000 steps  (1%)
[19:40:20] Completed 5000 out of 250000 steps  (2%)
[20:06:16] Completed 7500 out of 250000 steps  (3%)
[20:32:11] Completed 10000 out of 250000 steps  (4%)
[20:58:03] Completed 12500 out of 250000 steps  (5%)
[21:23:56] Completed 15000 out of 250000 steps  (6%)
[21:49:51] Completed 17500 out of 250000 steps  (7%)
[22:15:45] Completed 20000 out of 250000 steps  (8%)
[22:41:50] Completed 22500 out of 250000 steps  (9%)
[23:07:47] Completed 25000 out of 250000 steps  (10%)
[23:33:46] Completed 27500 out of 250000 steps  (11%)
[23:59:41] Completed 30000 out of 250000 steps  (12%)
[00:25:28] - Autosending finished units... [September 6 00:25:28 UTC]
[00:25:28] Trying to send all finished work units
[00:25:28] + No unsent completed units remaining.
[00:25:28] - Autosend completed
[00:25:36] Completed 32500 out of 250000 steps  (13%)
[00:51:27] Completed 35000 out of 250000 steps  (14%)
[01:17:22] Completed 37500 out of 250000 steps  (15%)
[01:43:14] Completed 40000 out of 250000 steps  (16%)
[02:09:05] Completed 42500 out of 250000 steps  (17%)
[02:35:03] Completed 45000 out of 250000 steps  (18%)
[03:01:00] Completed 47500 out of 250000 steps  (19%)
[03:27:00] Completed 50000 out of 250000 steps  (20%)
[03:52:54] Completed 52500 out of 250000 steps  (21%)
[04:18:49] Completed 55000 out of 250000 steps  (22%)
[04:44:48] Completed 57500 out of 250000 steps  (23%)
[05:10:48] Completed 60000 out of 250000 steps  (24%)
[05:36:46] Completed 62500 out of 250000 steps  (25%)
[06:02:41] Completed 65000 out of 250000 steps  (26%)
[06:25:28] - Autosending finished units... [September 6 06:25:28 UTC]
[06:25:28] Trying to send all finished work units
[06:25:28] + No unsent completed units remaining.
[06:25:28] - Autosend completed
[06:28:41] Completed 67500 out of 250000 steps  (27%)
[06:54:40] Completed 70000 out of 250000 steps  (28%)
[07:20:38] Completed 72500 out of 250000 steps  (29%)
[07:46:38] Completed 75000 out of 250000 steps  (30%)
[08:12:36] Completed 77500 out of 250000 steps  (31%)
[08:38:34] Completed 80000 out of 250000 steps  (32%)
[09:04:31] Completed 82500 out of 250000 steps  (33%)
[09:30:31] Completed 85000 out of 250000 steps  (34%)
[09:56:30] Completed 87500 out of 250000 steps  (35%)
[10:22:29] Completed 90000 out of 250000 steps  (36%)
[10:48:34] Completed 92500 out of 250000 steps  (37%)
[11:14:35] Completed 95000 out of 250000 steps  (38%)
[11:40:39] Completed 97500 out of 250000 steps  (39%)
[12:06:42] Completed 100000 out of 250000 steps  (40%)
[12:25:28] - Autosending finished units... [September 6 12:25:28 UTC]
[12:25:28] Trying to send all finished work units
[12:25:28] + No unsent completed units remaining.
[12:25:28] - Autosend completed
[12:32:56] Completed 102500 out of 250000 steps  (41%)
[12:58:57] Completed 105000 out of 250000 steps  (42%)
[13:25:01] Completed 107500 out of 250000 steps  (43%)
[13:51:01] Completed 110000 out of 250000 steps  (44%)
[14:17:00] Completed 112500 out of 250000 steps  (45%)
[14:43:00] Completed 115000 out of 250000 steps  (46%)
[15:09:02] Completed 117500 out of 250000 steps  (47%)
[15:35:03] Completed 120000 out of 250000 steps  (48%)
[16:01:01] Completed 122500 out of 250000 steps  (49%)
[16:27:01] Completed 125000 out of 250000 steps  (50%)
[16:52:59] Completed 127500 out of 250000 steps  (51%)
[17:18:58] Completed 130000 out of 250000 steps  (52%)
[17:44:57] Completed 132500 out of 250000 steps  (53%)
[18:11:00] Completed 135000 out of 250000 steps  (54%)
[18:25:28] - Autosending finished units... [September 6 18:25:28 UTC]
[18:25:28] Trying to send all finished work units
[18:25:28] + No unsent completed units remaining.
[18:25:28] - Autosend completed
[18:37:01] Completed 137500 out of 250000 steps  (55%)
[19:03:00] Completed 140000 out of 250000 steps  (56%)
[19:28:59] Completed 142500 out of 250000 steps  (57%)
[19:55:02] Completed 145000 out of 250000 steps  (58%)
[20:21:00] Completed 147500 out of 250000 steps  (59%)
[20:47:00] Completed 150000 out of 250000 steps  (60%)
[21:13:01] Completed 152500 out of 250000 steps  (61%)
[21:39:00] Completed 155000 out of 250000 steps  (62%)
[22:05:06] Completed 157500 out of 250000 steps  (63%)
[22:31:15] Completed 160000 out of 250000 steps  (64%)
[22:57:13] Completed 162500 out of 250000 steps  (65%)
[23:23:30] Completed 165000 out of 250000 steps  (66%)
[23:49:32] Completed 167500 out of 250000 steps  (67%)
[00:15:32] Completed 170000 out of 250000 steps  (68%)
[00:25:28] - Autosending finished units... [September 7 00:25:28 UTC]
[00:25:28] Trying to send all finished work units
[00:25:28] + No unsent completed units remaining.
[00:25:28] - Autosend completed
[00:41:29] Completed 172500 out of 250000 steps  (69%)
[01:07:28] Completed 175000 out of 250000 steps  (70%)
[01:33:24] Completed 177500 out of 250000 steps  (71%)
[01:59:22] Completed 180000 out of 250000 steps  (72%)
[02:25:19] Completed 182500 out of 250000 steps  (73%)
[02:51:14] Completed 185000 out of 250000 steps  (74%)
[03:17:11] Completed 187500 out of 250000 steps  (75%)
[03:43:08] Completed 190000 out of 250000 steps  (76%)
[04:09:04] Completed 192500 out of 250000 steps  (77%)
[04:35:00] Completed 195000 out of 250000 steps  (78%)
[05:00:57] Completed 197500 out of 250000 steps  (79%)
[05:26:54] Completed 200000 out of 250000 steps  (80%)
[05:52:55] Completed 202500 out of 250000 steps  (81%)
[06:18:53] Completed 205000 out of 250000 steps  (82%)
[06:25:28] - Autosending finished units... [September 7 06:25:28 UTC]
[06:25:28] Trying to send all finished work units
[06:25:28] + No unsent completed units remaining.
[06:25:28] - Autosend completed
[06:44:48] Completed 207500 out of 250000 steps  (83%)
[07:10:45] Completed 210000 out of 250000 steps  (84%)
[07:36:53] Completed 212500 out of 250000 steps  (85%)
[08:02:49] Completed 215000 out of 250000 steps  (86%)
[08:28:47] Completed 217500 out of 250000 steps  (87%)
[08:54:46] Completed 220000 out of 250000 steps  (88%)
[09:20:44] Completed 222500 out of 250000 steps  (89%)
[09:46:42] Completed 225000 out of 250000 steps  (90%)
[10:12:40] Completed 227500 out of 250000 steps  (91%)
[10:38:41] Completed 230000 out of 250000 steps  (92%)
[11:04:45] Completed 232500 out of 250000 steps  (93%)
[11:30:44] Completed 235000 out of 250000 steps  (94%)
[11:56:45] Completed 237500 out of 250000 steps  (95%)
[12:22:54] Completed 240000 out of 250000 steps  (96%)
[12:25:28] - Autosending finished units... [September 7 12:25:28 UTC]
[12:25:28] Trying to send all finished work units
[12:25:28] + No unsent completed units remaining.
[12:25:28] - Autosend completed
[12:48:53] Completed 242500 out of 250000 steps  (97%)
[13:14:49] Completed 245000 out of 250000 steps  (98%)
[13:40:54] Completed 247500 out of 250000 steps  (99%)
[14:06:51] Completed 250000 out of 250000 steps  (100%)
[14:07:04] DynamicWrapper: Finished Work Unit: sleep=10000
[14:07:14] 
[14:07:14] Finished Work Unit:
[14:07:14] - Reading up to 52713120 from "work/wudata_06.trr": Read 52713120
[14:07:15] trr file hash check passed.
[14:07:15] - Reading up to 46991448 from "work/wudata_06.xtc": Read 46991448
[14:07:15] xtc file hash check passed.
[14:07:15] edr file hash check passed.
[14:07:15] logfile size: 243057
[14:07:15] Leaving Run
[14:07:18] - Writing 100115565 bytes of core data to disk...
[14:07:20]   ... Done.
[14:07:36] - Shutting down core
[14:07:36] 
[14:07:36] Folding@home Core Shutdown: FINISHED_UNIT
[14:07:40] CoreStatus = 64 (100)
[14:07:40] Unit 6 finished with 70 percent of time to deadline remaining.
[14:07:40] Updated performance fraction: 0.912905
[14:07:43] Sending work to server
[14:07:43] Project: 6900 (Run 22, Clone 1, Gen 36)
[14:07:43] + Attempting to send results [September 7 14:07:43 UTC]
[14:07:43] - Reading file work/wuresults_06.dat from core
[14:07:43]   (Read 100115565 bytes from disk)
[14:07:43] Connecting to http://130.237.232.141:8080/
[14:13:17] Posted data.
[14:13:17] Initial: 0000; - Uploaded at ~292 kB/s
[14:13:17] - Averaged speed for that direction ~209 kB/s
[14:13:17] + Results successfully sent
[14:13:17] Thank you for your contribution to Folding@Home.
[14:13:17] + Number of Units Completed: 75
I think this looks ok and do not understand why I did not get the bonus.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: P6900 which 70% of the time until deadline but no bonus

Post by bruce »

The preferred deadline is 4.0 days. You may have downloaded the same WU twice, but the bonus is calculated based on the FIRST download to the FIRST successful upload. According to the records on the stats server, that amounted to 5.49 days, hence no bonus.
> Entered into logs at: 2011-09-07 08:04:18 PDT or 15:04 UTC, which is consistent with being uploaded at [14:13:17]
> WU assigned to donor at: 2011-09-01 20:22:41 PDT or 09-02 03:22 UTC. Downloading the WU on 09-05 at 18:47 UTC must not be the first download. Please check your previous logs.
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

Re: P6900 which 70% of the time until deadline but no bonus

Post by -alias- »

I have no control on what WU that is downloaded, but must just take what comes. Then the error is on the server that gives me these work units, in my opinion. Past history shows no other download of the same WU as far as I can see, if this is what has happened. What I can see is that all errors occur on the server 130,237,232,141. As I said earlier, I lost three P6900 with this server who could not accept the upload of such Work Units over 2 - 3 days, from September 3 to 5.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: P6900 which 70% of the time until deadline but no bonus

Post by bruce »

I gave you the data that I have access to: That the WU was downloaded, was not completed, was redownloaded, and was completed, resulting in a total time-span longer than the preferred deadline --- hence no bonus. (You have not provided any information about what happened to the first download. That information should still be in your log.)

Servers do occasionally have hardware and/or software problems, but they're pretty rare, and not directly related to the WU you're asking about. The Pande Group does what they can to fix them promptly. There are a number of posts by Kasson regarding the problems and the fixes that 130.237.232.141 has required and what is still being done to bring that server back on-line. We appreciate your report, but when problems like that do occur, they affect everyone, not just you. The published information on the bonus plan clearly states that the Pande Group will do everything possible to maintain reliable servers, but they will not make individual adjustments.
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

Re: P6900 which 70% of the time until deadline but no bonus

Post by -alias- »

Thank you for your reply and I understand that things can go wrong on servers as on the donor side.

I have now just lost a Project: 6904 (Run 2, Clone 0, Gen 14), who had come to 86%. The reason the event is this:

[10:33:14] core status = 8B (139)
[10:33:14] Client-core communications error: ERROR 0x8b
[10:33:14] Deleting current work unit & Continuing ...

After this, there came down a new Project: 6904 (Run 2, Clone 0, Gen 14) that as I understand is a identical WU. My question now is, will I lose this bonus to since the first WU is registered downloaded September 4?

For the record, I put the entire log below.

Code: Select all

--- Opening Log file [September 4 18:22:13 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/vidar/folding
Executable: ./fah6
Arguments: -smp -bigbeta -verbosity 9 

[18:22:13] - Ask before connecting: No
[18:22:13] - User name: -alias- (Team 37651)
[18:22:13] - User ID not found locally
[18:22:13] + Requesting User ID from server
[18:22:13] - Getting ID from AS: 
[18:22:13] Connecting to http://assign.stanford.edu:8080/
[18:22:15] Posted data.
[18:22:15] Initial: 063B; - Received User ID = 3B06A5D325D1DC5A
[18:22:15] - Machine ID: 1
[18:22:15] 
[18:22:15] Work directory not found. Creating...
[18:22:15] Could not open work queue, generating new queue...
[18:22:15] - Preparing to get new work unit...
[18:22:15] Cleaning up work directory
[18:22:15] - Autosending finished units... [September 4 18:22:15 UTC]
[18:22:15] + Attempting to get work packet
[18:22:15] Trying to send all finished work units
[18:22:15] Passkey found
[18:22:15] + No unsent completed units remaining.
[18:22:15] - Will indicate memory of 5974 MB
[18:22:15] - Autosend completed
[18:22:15] - Connecting to assignment server
[18:22:15] Connecting to http://assign.stanford.edu:8080/
[18:22:16] Posted data.
[18:22:16] Initial: ED82; - Successful: assigned to (130.237.232.237).
[18:22:16] + News From Folding@Home: Welcome to Folding@Home
[18:22:16] Loaded queue successfully.
[18:22:16] Sent data
[18:22:16] Connecting to http://130.237.232.237:8080/
[18:22:29] Posted data.
[18:22:29] Initial: 0000; - Receiving payload (expected size: 57215491)
[18:23:08] - Downloaded at ~1432 kB/s
[18:23:08] - Averaged speed for that direction ~1432 kB/s
[18:23:08] + Received work.
[18:23:08] + Closed connections
[18:23:08] 
[18:23:08] + Processing work unit
[18:23:08] Core required: FahCore_a5.exe
[18:23:08] Core found.
[18:23:08] Working on queue slot 01 [September 4 18:23:08 UTC]
[18:23:08] + Working ...
[18:23:08] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 01 -np 12 -checkpoint 3 -verbose -lifeline 5549 -version 634'

[18:23:08] 
[18:23:08] *------------------------------*
[18:23:08] Folding@Home Gromacs SMP Core
[18:23:08] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[18:23:08] 
[18:23:08] Preparing to commence simulation
[18:23:08] - Looking at optimizations...
[18:23:08] - Created dyn
[18:23:08] - Files status OK
[18:23:11] - Expanded 57214979 -> 71843392 (decompressed 50.5 percent)
[18:23:11] Called DecompressByteArray: compressed_data_size=57214979 data_size=71843392, decompressed_data_size=71843392 diff=0
[18:23:11] - Digital signature verified
[18:23:11] 
[18:23:11] Project: 6904 (Run 2, Clone 0, Gen 14)
[18:23:11] 
[18:23:11] Assembly optimizations on if available.
[18:23:11] Entering M.D.
[18:23:18] Mapping NT from 12 to 12 
[18:23:24] Completed 0 out of 250000 steps  (0%)
[19:22:23] Completed 2500 out of 250000 steps  (1%)
[20:21:22] Completed 5000 out of 250000 steps  (2%)
[21:20:13] Completed 7500 out of 250000 steps  (3%)
[22:19:07] Completed 10000 out of 250000 steps  (4%)
[23:18:03] Completed 12500 out of 250000 steps  (5%)
[00:16:56] Completed 15000 out of 250000 steps  (6%)
[00:22:15] - Autosending finished units... [September 5 00:22:15 UTC]
[00:22:15] Trying to send all finished work units
[00:22:15] + No unsent completed units remaining.
[00:22:15] - Autosend completed
[01:15:57] Completed 17500 out of 250000 steps  (7%)
[02:14:50] Completed 20000 out of 250000 steps  (8%)
[03:13:35] Completed 22500 out of 250000 steps  (9%)
[04:12:20] Completed 25000 out of 250000 steps  (10%)
[05:10:59] Completed 27500 out of 250000 steps  (11%)
[06:09:52] Completed 30000 out of 250000 steps  (12%)
[06:22:15] - Autosending finished units... [September 5 06:22:15 UTC]
[06:22:15] Trying to send all finished work units
[06:22:15] + No unsent completed units remaining.
[06:22:15] - Autosend completed
[07:08:35] Completed 32500 out of 250000 steps  (13%)
[08:07:27] Completed 35000 out of 250000 steps  (14%)
[09:06:16] Completed 37500 out of 250000 steps  (15%)
[10:05:02] Completed 40000 out of 250000 steps  (16%)
[11:03:55] Completed 42500 out of 250000 steps  (17%)
[12:02:51] Completed 45000 out of 250000 steps  (18%)
[12:22:15] - Autosending finished units... [September 5 12:22:15 UTC]
[12:22:15] Trying to send all finished work units
[12:22:15] + No unsent completed units remaining.
[12:22:15] - Autosend completed
[13:01:35] Completed 47500 out of 250000 steps  (19%)
[14:00:32] Completed 50000 out of 250000 steps  (20%)
[14:59:22] Completed 52500 out of 250000 steps  (21%)
[15:58:17] Completed 55000 out of 250000 steps  (22%)
[16:57:03] Completed 57500 out of 250000 steps  (23%)
[17:55:54] Completed 60000 out of 250000 steps  (24%)
[18:22:15] - Autosending finished units... [September 5 18:22:15 UTC]
[18:22:15] Trying to send all finished work units
[18:22:15] + No unsent completed units remaining.
[18:22:15] - Autosend completed
[18:54:40] Completed 62500 out of 250000 steps  (25%)
[19:53:27] Completed 65000 out of 250000 steps  (26%)
[20:52:10] Completed 67500 out of 250000 steps  (27%)
[21:51:22] Completed 70000 out of 250000 steps  (28%)
[22:50:14] Completed 72500 out of 250000 steps  (29%)
[23:49:12] Completed 75000 out of 250000 steps  (30%)
[00:22:15] - Autosending finished units... [September 6 00:22:15 UTC]
[00:22:15] Trying to send all finished work units
[00:22:15] + No unsent completed units remaining.
[00:22:15] - Autosend completed
[00:48:05] Completed 77500 out of 250000 steps  (31%)
[01:46:57] Completed 80000 out of 250000 steps  (32%)


--- Opening Log file [September 6 05:44:15 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/vidar/folding
Executable: ./fah6
Arguments: -smp -bigbeta -verbosity 9 

[05:44:15] - Ask before connecting: No
[05:44:15] - User name: -alias- (Team 37651)
[05:44:15] - User ID: 3B06A5D325D1DC5A
[05:44:15] - Machine ID: 1
[05:44:15] 
[05:44:15] Loaded queue successfully.
[05:44:15] 
[05:44:15] + Processing work unit
[05:44:15] Core required: FahCore_a5.exe
[05:44:15] Core found.
[05:44:15] - Autosending finished units... [September 6 05:44:15 UTC]
[05:44:15] Trying to send all finished work units
[05:44:15] + No unsent completed units remaining.
[05:44:15] - Autosend completed
[05:44:15] Working on queue slot 01 [September 6 05:44:15 UTC]
[05:44:15] + Working ...
[05:44:15] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 01 -np 12 -checkpoint 3 -verbose -lifeline 1787 -version 634'

[05:44:15] 
[05:44:15] *------------------------------*
[05:44:15] Folding@Home Gromacs SMP Core
[05:44:15] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[05:44:15] 
[05:44:15] Preparing to commence simulation
[05:44:15] - Ensuring status. Please wait.
[05:44:24] - Looking at optimizations...
[05:44:24] - Working with standard loops on this execution.
[05:44:25] - Previous termination of core was improper.
[05:44:25] - Files status OK
[05:44:29] - Expanded 57214979 -> 71843392 (decompressed 50.5 percent)
[05:44:29] Called DecompressByteArray: compressed_data_size=57214979 data_size=71843392, decompressed_data_size=71843392 diff=0
[05:44:29] - Digital signature verified
[05:44:29] 
[05:44:29] Project: 6904 (Run 2, Clone 0, Gen 14)
[05:44:29] 
[05:44:29] Entering M.D.
[05:44:35] Using Gromacs checkpoints
[05:44:39] Mapping NT from 12 to 12 
[05:44:54] Resuming from checkpoint
[05:44:56] Verified work/wudata_01.log
[05:44:57] Verified work/wudata_01.trr
[05:44:58] Verified work/wudata_01.xtc
[05:44:58] Verified work/wudata_01.edr
[05:44:59] Completed 81300 out of 250000 steps  (32%)
[06:13:15] Completed 82500 out of 250000 steps  (33%)
[07:12:09] Completed 85000 out of 250000 steps  (34%)
[08:11:02] Completed 87500 out of 250000 steps  (35%)
[09:10:01] Completed 90000 out of 250000 steps  (36%)
[10:08:58] Completed 92500 out of 250000 steps  (37%)
[11:07:51] Completed 95000 out of 250000 steps  (38%)
[11:44:15] - Autosending finished units... [September 6 11:44:15 UTC]
[11:44:15] Trying to send all finished work units
[11:44:15] + No unsent completed units remaining.
[11:44:15] - Autosend completed
[12:06:45] Completed 97500 out of 250000 steps  (39%)
[13:05:35] Completed 100000 out of 250000 steps  (40%)
[14:04:36] Completed 102500 out of 250000 steps  (41%)
[15:03:31] Completed 105000 out of 250000 steps  (42%)
[16:02:21] Completed 107500 out of 250000 steps  (43%)
[17:01:18] Completed 110000 out of 250000 steps  (44%)
[17:44:15] - Autosending finished units... [September 6 17:44:15 UTC]
[17:44:15] Trying to send all finished work units
[17:44:15] + No unsent completed units remaining.
[17:44:15] - Autosend completed
[18:00:14] Completed 112500 out of 250000 steps  (45%)
[18:59:06] Completed 115000 out of 250000 steps  (46%)
[19:58:09] Completed 117500 out of 250000 steps  (47%)
[20:27:17] ***** Got an Activate signal (2)
[20:27:17] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [September 6 20:30:34 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/vidar/folding
Executable: ./fah6
Arguments: -smp -bigbeta -verbosity 9 

[20:30:34] - Ask before connecting: No
[20:30:34] - User name: -alias- (Team 37651)
[20:30:34] - User ID: 3B06A5D325D1DC5A
[20:30:34] - Machine ID: 1
[20:30:34] 
[20:30:35] Loaded queue successfully.
[20:30:35] 
[20:30:35] + Processing work unit
[20:30:35] Core required: FahCore_a5.exe
[20:30:35] Core found.
[20:30:35] - Autosending finished units... [September 6 20:30:35 UTC]
[20:30:35] Trying to send all finished work units
[20:30:35] + No unsent completed units remaining.
[20:30:35] - Autosend completed
[20:30:35] Working on queue slot 01 [September 6 20:30:35 UTC]
[20:30:35] + Working ...
[20:30:35] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 01 -np 12 -checkpoint 3 -verbose -lifeline 1630 -version 634'

[20:30:35] 
[20:30:35] *------------------------------*
[20:30:35] Folding@Home Gromacs SMP Core
[20:30:35] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[20:30:35] 
[20:30:35] Preparing to commence simulation
[20:30:35] - Looking at optimizations...
[20:30:35] - Files status OK
[20:30:40] - Expanded 57214979 -> 71843392 (decompressed 50.5 percent)
[20:30:40] Called DecompressByteArray: compressed_data_size=57214979 data_size=71843392, decompressed_data_size=71843392 diff=0
[20:30:40] - Digital signature verified
[20:30:40] 
[20:30:40] Project: 6904 (Run 2, Clone 0, Gen 14)
[20:30:40] 
[20:30:40] Assembly optimizations on if available.
[20:30:40] Entering M.D.
[20:30:46] Using Gromacs checkpoints
[20:30:50] Mapping NT from 12 to 12 
[20:31:07] Resuming from checkpoint
[20:31:09] Verified work/wudata_01.log
[20:31:10] Verified work/wudata_01.trr
[20:31:11] Verified work/wudata_01.xtc
[20:31:11] Verified work/wudata_01.edr
[20:31:12] Completed 118685 out of 250000 steps  (47%)
[21:03:11] Completed 120000 out of 250000 steps  (48%)
[22:02:15] Completed 122500 out of 250000 steps  (49%)
[23:01:12] Completed 125000 out of 250000 steps  (50%)
[00:00:16] Completed 127500 out of 250000 steps  (51%)
[00:59:19] Completed 130000 out of 250000 steps  (52%)
[01:58:17] Completed 132500 out of 250000 steps  (53%)
[02:30:35] - Autosending finished units... [September 7 02:30:35 UTC]
[02:30:35] Trying to send all finished work units
[02:30:35] + No unsent completed units remaining.
[02:30:35] - Autosend completed
[02:57:19] Completed 135000 out of 250000 steps  (54%)
[03:56:19] Completed 137500 out of 250000 steps  (55%)
[04:55:17] Completed 140000 out of 250000 steps  (56%)
[05:54:37] Completed 142500 out of 250000 steps  (57%)
[06:53:39] Completed 145000 out of 250000 steps  (58%)
[07:52:16] Completed 147500 out of 250000 steps  (59%)
[08:30:35] - Autosending finished units... [September 7 08:30:35 UTC]
[08:30:35] Trying to send all finished work units
[08:30:35] + No unsent completed units remaining.
[08:30:35] - Autosend completed
[08:50:28] Completed 150000 out of 250000 steps  (60%)
[09:48:37] Completed 152500 out of 250000 steps  (61%)
[10:46:48] Completed 155000 out of 250000 steps  (62%)
[11:44:55] Completed 157500 out of 250000 steps  (63%)
[12:43:01] Completed 160000 out of 250000 steps  (64%)
[13:41:11] Completed 162500 out of 250000 steps  (65%)
[14:30:35] - Autosending finished units... [September 7 14:30:35 UTC]
[14:30:35] Trying to send all finished work units
[14:30:35] + No unsent completed units remaining.
[14:30:35] - Autosend completed
[14:39:17] Completed 165000 out of 250000 steps  (66%)
[15:37:28] Completed 167500 out of 250000 steps  (67%)
[16:35:34] Completed 170000 out of 250000 steps  (68%)
[17:33:41] Completed 172500 out of 250000 steps  (69%)
[18:31:53] Completed 175000 out of 250000 steps  (70%)
[19:30:00] Completed 177500 out of 250000 steps  (71%)
[20:28:07] Completed 180000 out of 250000 steps  (72%)
[20:30:35] - Autosending finished units... [September 7 20:30:35 UTC]
[20:30:35] Trying to send all finished work units
[20:30:35] + No unsent completed units remaining.
[20:30:35] - Autosend completed
[21:26:19] Completed 182500 out of 250000 steps  (73%)
[22:24:25] Completed 185000 out of 250000 steps  (74%)
[23:22:35] Completed 187500 out of 250000 steps  (75%)
[00:20:41] Completed 190000 out of 250000 steps  (76%)
[01:18:51] Completed 192500 out of 250000 steps  (77%)
[02:17:04] Completed 195000 out of 250000 steps  (78%)
[02:30:35] - Autosending finished units... [September 8 02:30:35 UTC]
[02:30:35] Trying to send all finished work units
[02:30:35] + No unsent completed units remaining.
[02:30:35] - Autosend completed
[03:15:13] Completed 197500 out of 250000 steps  (79%)
[04:13:26] Completed 200000 out of 250000 steps  (80%)
[05:11:34] Completed 202500 out of 250000 steps  (81%)
[06:09:55] Completed 205000 out of 250000 steps  (82%)
[07:08:06] Completed 207500 out of 250000 steps  (83%)
[08:06:12] Completed 210000 out of 250000 steps  (84%)
[08:30:35] - Autosending finished units... [September 8 08:30:35 UTC]
[08:30:35] Trying to send all finished work units
[08:30:35] + No unsent completed units remaining.
[08:30:35] - Autosend completed
[09:04:23] Completed 212500 out of 250000 steps  (85%)
[10:02:30] Completed 215000 out of 250000 steps  (86%)
[10:33:14] CoreStatus = 8B (139)
[10:33:14] Client-core communications error: ERROR 0x8b
[10:33:14] Deleting current work unit & continuing...
[10:42:26] ***** Got an Activate signal (2)
[10:42:26] - Warning: Could not delete all work unit files (1): Core file absent
[10:42:26] Trying to send all finished work units
[10:42:26] + No unsent completed units remaining.
[10:42:26] - Preparing to get new work unit...
[10:42:26] Cleaning up work directory
[10:42:26] + Attempting to get work packet
[10:42:26] Passkey found
[10:42:26] - Will indicate memory of 5974 MB
[10:42:26] - Connecting to assignment server
[10:42:26] Connecting to http://assign.stanford.edu:8080/
[10:42:26] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [September 8 10:49:44 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/vidar/folding
Executable: ./fah6
Arguments: -smp -bigbeta -verbosity 9 

[10:49:44] - Ask before connecting: No
[10:49:44] - User name: -alias- (Team 37651)
[10:49:44] - User ID: 3B06A5D325D1DC5A
[10:49:44] - Machine ID: 1
[10:49:44] 
[10:49:45] Loaded queue successfully.
[10:49:45] - Preparing to get new work unit...
[10:49:45] Cleaning up work directory
[10:49:45] - Autosending finished units... [September 8 10:49:45 UTC]
[10:49:45] Trying to send all finished work units
[10:49:45] + No unsent completed units remaining.
[10:49:45] - Autosend completed
[10:49:45] + Attempting to get work packet
[10:49:45] Passkey found
[10:49:45] - Will indicate memory of 5974 MB
[10:49:45] - Connecting to assignment server
[10:49:45] Connecting to http://assign.stanford.edu:8080/
[10:49:46] Posted data.
[10:49:46] Initial: ED82; - Successful: assigned to (130.237.232.237).
[10:49:46] + News From Folding@Home: Welcome to Folding@Home
[10:49:46] Loaded queue successfully.
[10:49:46] Sent data
[10:49:46] Connecting to http://130.237.232.237:8080/
[10:49:59] Posted data.
[10:49:59] Initial: 0000; - Receiving payload (expected size: 57215491)
[10:50:38] - Downloaded at ~1432 kB/s
[10:50:38] - Averaged speed for that direction ~1432 kB/s
[10:50:38] + Received work.
[10:50:38] + Closed connections
[10:50:38] 
[10:50:38] + Processing work unit
[10:50:38] Core required: FahCore_a5.exe
[10:50:38] Core found.
[10:50:38] Working on queue slot 02 [September 8 10:50:38 UTC]
[10:50:38] + Working ...
[10:50:38] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 02 -np 12 -checkpoint 3 -verbose -lifeline 1541 -version 634'

[10:50:39] 
[10:50:39] *------------------------------*
[10:50:39] Folding@Home Gromacs SMP Core
[10:50:39] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[10:50:39] 
[10:50:39] Preparing to commence simulation
[10:50:39] - Looking at optimizations...
[10:50:39] - Created dyn
[10:50:39] - Files status OK
[10:50:42] - Expanded 57214979 -> 71843392 (decompressed 50.5 percent)
[10:50:42] Called DecompressByteArray: compressed_data_size=57214979 data_size=71843392, decompressed_data_size=71843392 diff=0
[10:50:42] - Digital signature verified
[10:50:42] 
[10:50:42] Project: 6904 (Run 2, Clone 0, Gen 14)
[10:50:42] 
[10:50:43] Assembly optimizations on if available.
[10:50:43] Entering M.D.
[10:50:50] Mapping NT from 12 to 12 
[10:50:55] Completed 0 out of 250000 steps  (0%)
[10:51:26] ***** Got an Activate signal (2)
[10:51:26] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [September 8 11:21:21 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/vidar/folding
Executable: ./fah6
Arguments: -smp -bigbeta -verbosity 9 

[11:21:21] - Ask before connecting: No
[11:21:21] - User name: -alias- (Team 37651)
[11:21:21] - User ID: 3B06A5D325D1DC5A
[11:21:21] - Machine ID: 1
[11:21:21] 
[11:21:22] Loaded queue successfully.
[11:21:22] 
[11:21:22] + Processing work unit
[11:21:22] Core required: FahCore_a5.exe
[11:21:22] Core found.
[11:21:22] - Autosending finished units... [September 8 11:21:22 UTC]
[11:21:22] Trying to send all finished work units
[11:21:22] + No unsent completed units remaining.
[11:21:22] - Autosend completed
[11:21:22] Working on queue slot 02 [September 8 11:21:22 UTC]
[11:21:22] + Working ...
[11:21:22] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 02 -np 12 -checkpoint 3 -verbose -lifeline 1770 -version 634'

[11:21:22] 
[11:21:22] *------------------------------*
[11:21:22] Folding@Home Gromacs SMP Core
[11:21:22] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[11:21:22] 
[11:21:22] Preparing to commence simulation
[11:21:22] - Looking at optimizations...
[11:21:22] - Files status OK
[11:21:25] - Expanded 57214979 -> 71843392 (decompressed 50.5 percent)
[11:21:25] Called DecompressByteArray: compressed_data_size=57214979 data_size=71843392, decompressed_data_size=71843392 diff=0
[11:21:25] - Digital signature verified
[11:21:25] 
[11:21:25] Project: 6904 (Run 2, Clone 0, Gen 14)
[11:21:25] 
[11:21:25] Assembly optimizations on if available.
[11:21:25] Entering M.D.
[11:21:33] Mapping NT from 12 to 12 
[11:21:38] Completed 0 out of 250000 steps  (0%)
[12:21:08] Completed 2500 out of 250000 steps  (1%)
[13:20:24] Completed 5000 out of 250000 steps  (2%)


--- Opening Log file [September 8 13:27:33 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/vidar/folding
Executable: ./fah6
Arguments: -smp -bigbeta -verbosity 9 

[13:27:33] - Ask before connecting: No
[13:27:33] - User name: -alias- (Team 37651)
[13:27:33] - User ID: 3B06A5D325D1DC5A
[13:27:33] - Machine ID: 1
[13:27:33] 
[13:27:33] Loaded queue successfully.
[13:27:33] 
[13:27:33] + Processing work unit
[13:27:33] Core required: FahCore_a5.exe
[13:27:33] Core found.
[13:27:33] - Autosending finished units... [13:27:33]
[13:27:33] Trying to send all finished work units
[13:27:33] + No unsent completed units remaining.
[13:27:33] - Autosend completed
[13:27:33] Working on queue slot 02 [September 8 13:27:33 UTC]
[13:27:33] + Working ...
[13:27:33] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 02 -np 12 -checkpoint 3 -verbose -lifeline 1587 -version 634'

[13:27:33] 
[13:27:33] *------------------------------*
[13:27:33] Folding@Home Gromacs SMP Core
[13:27:33] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[13:27:33] 
[13:27:33] Preparing to commence simulation
[13:27:33] - Ensuring status. Please wait.
[13:27:42] - Looking at optimizations...
[13:27:42] - Working with standard loops on this execution.
[13:27:42] - Previous termination of core was improper.
[13:27:42] - Files status OK
[13:27:47] - Expanded 57214979 -> 71843392 (decompressed 50.5 percent)
[13:27:47] Called DecompressByteArray: compressed_data_size=57214979 data_size=71843392, decompressed_data_size=71843392 diff=0
[13:27:47] - Digital signature verified
[13:27:47] 
[13:27:47] Project: 6904 (Run 2, Clone 0, Gen 14)
[13:27:47] 
[13:27:47] Entering M.D.
[13:27:53] Using Gromacs checkpoints
[13:27:57] Mapping NT from 12 to 12 
[13:28:16] Resuming from checkpoint
[13:28:17] Verified work/wudata_02.log
[13:28:18] Verified work/wudata_02.trr
[13:28:19] Verified work/wudata_02.xtc
[13:28:19] Verified work/wudata_02.edr
[13:28:20] Completed 5185 out of 250000 steps  (2%)
[14:23:05] Completed 7500 out of 250000 steps  (3%)
[15:21:53] Completed 10000 out of 250000 steps  (4%)
[16:20:24] Completed 12500 out of 250000 steps  (5%)
[17:18:48] Completed 15000 out of 250000 steps  (6%)
[18:17:17] Completed 17500 out of 250000 steps  (7%)
[19:15:50] Completed 20000 out of 250000 steps  (8%)
[19:27:33] - Autosending finished units... [September 8 19:27:33 UTC]
[19:27:33] Trying to send all finished work units
[19:27:33] + No unsent completed units remaining.
[19:27:33] - Autosend completed
[20:15:14] Completed 22500 out of 250000 steps  (9%)
Dave_Goodchild
Posts: 25
Joined: Thu Jun 19, 2008 7:10 pm

Re: P6900 which 70% of the time until deadline but no bonus

Post by Dave_Goodchild »

Yes you will loose the bonus on this one too as the clock started on the original download on the 4th, I suspect this what happened on the original WU you reported, is the computer overclocked at all?
Image
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

Re: P6900 which 70% of the time until deadline but no bonus

Post by -alias- »

It is an Intel i7 980X running on 4.6GHz, for P6904 it will give a credit of approx. 400K, and hence a PPD of approx. 100K.

I stopped it and got down a P6903 which gives less credit, but and I hope it will complete.
Duboisi
Posts: 13
Joined: Mon Jun 20, 2011 1:07 pm

Re: P6900 which 70% of the time until deadline but no bonus

Post by Duboisi »

-alias- wrote:Thank you for your reply and I understand that things can go wrong on servers as on the donor side.

I have now just lost a Project: 6904 (Run 2, Clone 0, Gen 14), who had come to 86%. The reason the event is this:

[10:33:14] core status = 8B (139)
[10:33:14] Client-core communications error: ERROR 0x8b
[10:33:14] Deleting current work unit & Continuing ...

After this, there came down a new Project: 6904 (Run 2, Clone 0, Gen 14) that as I understand is a identical WU. My question now is, will I lose this bonus to since the first WU is registered downloaded September 4?
-------------------------------------------------------------------------------------------------------
Anyone know if we have core status error before completion, and get the same WU during new WU reload, can we use the last backup to continue rather than start from 0% ? TQ.

BTW, previously I get 2x core status 8b after I upgraded my RAM to 2133 (2600k) and it was not stable running at xmp profile. Increased VCCIO (CPUIO V) and it was stable since.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: P6900 which 70% of the time until deadline but no bonus

Post by bruce »

Duboisi wrote:Anyone know if we have core status error before completion, and get the same WU during new WU reload, can we use the last backup to continue rather than start from 0% ? TQ.
From a practical point of view, there's a pretty good chance that the backup will fail too, and you'll just be wasting your time manipulating FAH's files. Then, too, legally speaking, manipulating FAH's files by using that backup is prohibited by the EULA.

If the fresh copy of the WU can be completed based on the projected speed of your system, let it run. If the fresh copy CANNOT be completed, delete it and let the client move on to something it can complete.

If these events happen more than once in a long time, give your system's overclock more margin and make sure your system is absolutely stable before wasting any more time trying to fold. Unstable systems cost both you and Stanford more than you can gain by trying to get the ultimate overclock to run.
Grandpa_01
Posts: 1122
Joined: Wed Mar 04, 2009 7:36 am
Hardware configuration: 3 - Supermicro H8QGi-F AMD MC 6174=144 cores 2.5Ghz, 96GB G.Skill DDR3 1333Mhz Ubuntu 10.10
2 - Asus P6X58D-E i7 980X 4.4Ghz 6GB DDR3 2000 A-Data 64GB SSD Ubuntu 10.10
1 - Asus Rampage Gene III 17 970 4.3Ghz DDR3 2000 2-500GB Segate 7200.11 0-Raid Ubuntu 10.10
1 - Asus G73JH Laptop i7 740QM 1.86Ghz ATI 5870M

Re: P6900 which 70% of the time until deadline but no bonus

Post by Grandpa_01 »

ERROR 0x8b is an OC problem I run 5 - 970 and 980X rigs when the 6904's first came out I got that error several times and it usually does not happen until later on in the WU My OC's were 100% stable with all other bigadv WU's. I stopped my machines from folding the 6904's until I readjusted my OC on all of my rigs. I have not had a problem since, I highly recommend you lower your OC or raise your v or you will just be wasting your time folding when it comes to the 6904's you may get 1 to complete once in a while with your current OC but most will fail usually after 70% so a waste of 3 or more days folding. All of my rigs now run at 4.4Ghz or less to run these 100% stable. I was able to run all of the rest of the bigadv stable up to 4.65Ghz with a couple of my 980X rigs but they will not run the 6904's at that.
Image
2 - SM H8QGi-F AMD 6xxx=112 cores @ 3.2 & 3.9Ghz
5 - SM X9QRI-f+ Intel 4650 = 320 cores @ 3.15Ghz
2 - I7 980X 4.4Ghz 2-GTX680
1 - 2700k 4.4Ghz GTX680
Total = 464 cores folding
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

Re: P6900 which 70% of the time until deadline but no bonus

Post by -alias- »

Thanks for your advice, I have now clocked my i7 980X slightly down to 4.55GHz which seems to work well with the P6903 which will be completed on Sunday. This is my first I7 980X I have in folding so I do need some time before I can find the setting that makes it stable. Before this I run a while with standard SMPs, which I never had a crash with so I tooth it was stable, but there is apparently a difference up running P690n WUs.
Grandpa_01
Posts: 1122
Joined: Wed Mar 04, 2009 7:36 am
Hardware configuration: 3 - Supermicro H8QGi-F AMD MC 6174=144 cores 2.5Ghz, 96GB G.Skill DDR3 1333Mhz Ubuntu 10.10
2 - Asus P6X58D-E i7 980X 4.4Ghz 6GB DDR3 2000 A-Data 64GB SSD Ubuntu 10.10
1 - Asus Rampage Gene III 17 970 4.3Ghz DDR3 2000 2-500GB Segate 7200.11 0-Raid Ubuntu 10.10
1 - Asus G73JH Laptop i7 740QM 1.86Ghz ATI 5870M

Re: P6900 which 70% of the time until deadline but no bonus

Post by Grandpa_01 »

Be aware that for me the 6903 WU's were not as difficult to run as the 6904 WU's. You may still need to lower the OC a little to be 6904 stable. :wink:
Post Reply