171.67.108.11 Reject

Moderators: Site Moderators, FAHC Science Team

Post Reply
MoneyGuyBK
Posts: 179
Joined: Sun Dec 02, 2007 6:40 am
Location: Team_XPS ..... OC, S. Calif

171.67.108.11 (and 171.67.108.25)

Post by MoneyGuyBK »

Trouble uploading GPU client's results ... 4 attempts this morning:

Code: Select all

[15:18:03] Completed 97%
[15:19:14] Completed 98%
[15:20:24] Completed 99%
[15:21:34] Completed 100%
[15:21:34] Successful run
[15:21:34] DynamicWrapper: Finished Work Unit: sleep=10000
[15:21:44] Reserved 112120 bytes for xtc file; Cosm status=0
[15:21:44] Allocated 112120 bytes for xtc file
[15:21:44] - Reading up to 112120 from "work/wudata_05.xtc": Read 112120
[15:21:44] Read 112120 bytes from xtc file; available packet space=786318344
[15:21:44] xtc file hash check passed.
[15:21:44] Reserved 33528 33528 786318344 bytes for arc file=<work/wudata_05.trr
> Cosm status=0
[15:21:44] Allocated 33528 bytes for arc file
[15:21:44] - Reading up to 33528 from "work/wudata_05.trr": Read 33528
[15:21:44] Read 33528 bytes from arc file; available packet space=786284816
[15:21:44] trr file hash check passed.
[15:21:44] Allocated 560 bytes for edr file
[15:21:44] Read bedfile
[15:21:44] edr file hash check passed.
[15:21:44] Allocated 10872 bytes for logfile
[15:21:44] Read logfile
[15:21:44] GuardedRun: success in DynamicWrapper
[15:21:44] GuardedRun: done
[15:21:44] Run: GuardedRun completed.
[15:21:45] - Writing 157592 bytes of core data to disk...
[15:21:45] Done: 157080 -> 151238 (compressed to 96.2 percent)
[15:21:45]   ... Done.
[15:21:45] - Shutting down core
[15:21:45]
[15:21:45] Folding@home Core Shutdown: FINISHED_UNIT
[15:21:48] CoreStatus = 64 (100)
[15:21:48] Unit 5 finished with 97 percent of time to deadline remaining.
[15:21:48] Updated performance fraction: 0.979708
[15:21:48] Sending work to server
[15:21:48] Project: 5753 (Run 8, Clone 224, Gen 308)
[15:21:48] - Read packet limit of 540015616... Set to 524286976.


[15:21:48] + Attempting to send results [May 28 15:21:48 UTC]
[15:21:48] - Reading file work/wuresults_05.dat from core
[15:21:48]   (Read 151750 bytes from disk)
[15:21:48] Connecting to http://171.67.108.11:8080/
[15:21:49] - Couldn't send HTTP request to server
[15:21:49] + Could not connect to Work Server (results)
[15:21:49]     (171.67.108.11:8080)
[15:21:49] + Retrying using alternative port
[15:21:49] Connecting to http://171.67.108.11:80/
[15:21:50] - Couldn't send HTTP request to server
[15:21:50] + Could not connect to Work Server (results)
[15:21:50]     (171.67.108.11:80)
[15:21:50] - Error: Could not transmit unit 05 (completed May 28) to work server
.
[15:21:50] - 1 failed uploads of this unit.
[15:21:50]   Keeping unit 05 in queue.
[15:21:50] Trying to send all finished work units
[15:21:50] Project: 5753 (Run 8, Clone 224, Gen 308)
[15:21:50] - Read packet limit of 540015616... Set to 524286976.


[15:21:50] + Attempting to send results [May 28 15:21:50 UTC]
[15:21:50] - Reading file work/wuresults_05.dat from core
[15:21:50]   (Read 151750 bytes from disk)
[15:21:50] Connecting to http://171.67.108.11:8080/
[15:21:51] - Couldn't send HTTP request to server
[15:21:51] + Could not connect to Work Server (results)
[15:21:51]     (171.67.108.11:8080)
[15:21:51] + Retrying using alternative port
[15:21:51] Connecting to http://171.67.108.11:80/
[15:21:52] - Couldn't send HTTP request to server
[15:21:52] + Could not connect to Work Server (results)
[15:21:52]     (171.67.108.11:80)
[15:21:52] - Error: Could not transmit unit 05 (completed May 28) to work server
.
[15:21:52] - 2 failed uploads of this unit.
[15:21:52] - Read packet limit of 540015616... Set to 524286976.


[15:21:52] + Attempting to send results [May 28 15:21:52 UTC]
[15:21:52] - Reading file work/wuresults_05.dat from core
[15:21:52]   (Read 151750 bytes from disk)
[15:21:52] Connecting to http://171.67.108.25:8080/
[15:21:52] - Couldn't send HTTP request to server
[15:21:52]   (Got status 503)
[15:21:52] + Could not connect to Work Server (results)
[15:21:52]     (171.67.108.25:8080)
[15:21:52] + Retrying using alternative port
[15:21:52] Connecting to http://171.67.108.25:80/
[15:21:52] - Couldn't send HTTP request to server
[15:21:52]   (Got status 503)
[15:21:52] + Could not connect to Work Server (results)
[15:21:52]     (171.67.108.25:80)
[15:21:52]   Could not transmit unit 05 to Collection server; keeping in queue.
[15:21:52] + Sent 0 of 1 completed units to the server
[15:21:52] - Preparing to get new work unit...
[15:21:52] + Attempting to get work packet
[15:21:52] - Will indicate memory of 512 MB
[15:21:52] - Connecting to assignment server
[15:21:52] Connecting to http://assign-GPU.stanford.edu:8080/
[15:21:53] Posted data.
[15:21:53] Initial: 40AB; - Successful: assigned to (171.64.122.70).
[15:21:53] + News From Folding@Home: Welcome to Folding@Home
[15:21:53] Loaded queue successfully.
[15:21:53] Connecting to http://171.64.122.70:8080/
[15:21:53] Posted data.
[15:21:53] Initial: 0000; - Receiving payload (expected size: 68824)
[15:21:53] Conversation time very short, giving reduced weight in bandwidth avg
[15:21:53] - Downloaded at ~134 kB/s
[15:21:53] - Averaged speed for that direction ~117 kB/s
[15:21:53] + Received work.
[15:21:53] Trying to send all finished work units
[15:21:53] Project: 5753 (Run 8, Clone 224, Gen 308)
[15:21:53] - Read packet limit of 540015616... Set to 524286976.


[15:21:53] + Attempting to send results [May 28 15:21:53 UTC]
[15:21:53] - Reading file work/wuresults_05.dat from core
[15:21:53]   (Read 151750 bytes from disk)
[15:21:53] Connecting to http://171.67.108.11:8080/
[15:21:54] - Couldn't send HTTP request to server
[15:21:54] + Could not connect to Work Server (results)
[15:21:54]     (171.67.108.11:8080)
[15:21:54] + Retrying using alternative port
[15:21:54] Connecting to http://171.67.108.11:80/
[15:21:55] - Couldn't send HTTP request to server
[15:21:55] + Could not connect to Work Server (results)
[15:21:55]     (171.67.108.11:80)
[15:21:55] - Error: Could not transmit unit 05 (completed May 28) to work server
.
[15:21:55] - 3 failed uploads of this unit.
[15:21:55] - Read packet limit of 540015616... Set to 524286976.


[15:21:55] + Attempting to send results [May 28 15:21:55 UTC]
[15:21:55] - Reading file work/wuresults_05.dat from core
[15:21:55]   (Read 151750 bytes from disk)
[15:21:55] Connecting to http://171.67.108.25:8080/
[15:21:55] - Couldn't send HTTP request to server
[15:21:55]   (Got status 503)
[15:21:55] + Could not connect to Work Server (results)
[15:21:55]     (171.67.108.25:8080)
[15:21:55] + Retrying using alternative port
[15:21:55] Connecting to http://171.67.108.25:80/
[15:21:55] - Couldn't send HTTP request to server
[15:21:55]   (Got status 503)
[15:21:55] + Could not connect to Work Server (results)
[15:21:55]     (171.67.108.25:80)
[15:21:55]   Could not transmit unit 05 to Collection server; keeping in queue.
[15:21:55] + Sent 0 of 1 completed units to the server
[15:21:55] + Closed connections
[15:21:55]
[15:21:55] + Processing work unit
[15:21:55] Core required: FahCore_14.exe
[15:21:55] Core found.
[15:21:55] Working on queue slot 06 [May 28 15:21:55 UTC]
[15:21:55] + Working ...
[15:21:55] - Calling '.\FahCore_14.exe -dir work/ -suffix 06 -priority 96 -check
point 30 -verbose -lifeline 1392 -version 623'

[15:21:55]
[15:21:55] *------------------------------*
[15:21:55] Folding@Home GPU Core - Beta
[15:21:55] Version 1.25 (Mon Mar 2 19:49:32 PST 2009)
[15:21:55]
[15:21:55] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14
.00.50727.762 for 80x86
[15:21:55] Build host: vspm46
[15:21:55] Board Type: Nvidia
[15:21:55] Core      :
[15:21:55] Preparing to commence simulation
[15:21:55] - Looking at optimizations...
[15:21:55] - Created dyn
[15:21:55] - Files status OK
[15:21:55] - Expanded 68312 -> 357580 (decompressed 523.4 percent)
[15:21:55] Called DecompressByteArray: compressed_data_size=68312 data_size=3575
80, decompressed_data_size=357580 diff=0
[15:21:55] - Digital signature verified
[15:21:56]
[15:21:56] Project: 5905 (Run 11, Clone 299, Gen 22)
[15:21:56]
[15:21:56] Assembly optimizations on if available.
[15:21:56] Entering M.D.
[15:22:02] Tpr hash work/wudata_06.tpr:  3587357250 2299247732 2530106503 412907
7427 3737839382
[15:22:02] Working on Protein
[15:22:04] Client config found, loading data.
[15:22:04] Starting GUI Server
[15:25:19] Completed 1%
[15:28:52] Completed 2%
[15:32:13] Completed 3%
[15:35:49] Completed 4%
[15:38:52] - Autosending finished units... [May 28 15:38:52 UTC]
[15:38:52] Trying to send all finished work units
[15:38:52] Project: 5753 (Run 8, Clone 224, Gen 308)
[15:38:52] - Read packet limit of 540015616... Set to 524286976.


[15:38:52] + Attempting to send results [May 28 15:38:52 UTC]
[15:38:52] - Reading file work/wuresults_05.dat from core
[15:38:52]   (Read 151750 bytes from disk)
[15:38:52] Connecting to http://171.67.108.11:8080/
[15:38:53] - Couldn't send HTTP request to server
[15:38:53] + Could not connect to Work Server (results)
[15:38:53]     (171.67.108.11:8080)
[15:38:53] + Retrying using alternative port
[15:38:53] Connecting to http://171.67.108.11:80/
[15:38:54] - Couldn't send HTTP request to server
[15:38:54] + Could not connect to Work Server (results)
[15:38:54]     (171.67.108.11:80)
[15:38:54] - Error: Could not transmit unit 05 (completed May 28) to work server
.
[15:38:54] - 4 failed uploads of this unit.
[15:38:54] - Read packet limit of 540015616... Set to 524286976.


[15:38:54] + Attempting to send results [May 28 15:38:54 UTC]
[15:38:54] - Reading file work/wuresults_05.dat from core
[15:38:54]   (Read 151750 bytes from disk)
[15:38:54] Connecting to http://171.67.108.25:8080/
[15:38:54] - Couldn't send HTTP request to server
[15:38:54]   (Got status 503)
[15:38:54] + Could not connect to Work Server (results)
[15:38:54]     (171.67.108.25:8080)
[15:38:54] + Retrying using alternative port
[15:38:54] Connecting to http://171.67.108.25:80/
[15:38:54] - Couldn't send HTTP request to server
[15:38:54]   (Got status 503)
[15:38:54] + Could not connect to Work Server (results)
[15:38:54]     (171.67.108.25:80)
[15:38:54]   Could not transmit unit 05 to Collection server; keeping in queue.
[15:38:54] + Sent 0 of 1 completed units to the server
[15:38:54] - Autosend completed
[15:39:28] Completed 5%
[15:43:03] Completed 6%
[15:46:35] Completed 7%
[15:50:08] Completed 8%











Peace
T.E.A.M. “Together Everyone Accomplishes Miracles!”
Image
OC, S. California ... God Bless All
Top
gwildperson
Posts: 450
Joined: Tue Dec 04, 2007 8:36 pm

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by gwildperson »

171.67.108.11 is in "reject" and 171.67.108.25 is giving you Error 503 (too busy).
Top
vvoelz
Pande Group Member
Posts: 552
Joined: Sun Dec 02, 2007 8:07 pm
Location: Temple University, Philadelphia PA

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by vvoelz »

MoneyGuyBK :

171.67.108.11 (vsp07) should be up and accepting work, if you'd like to try uploading again.
These are the project 5753, RUN8 WUs received in the last hour:

Code: Select all

Got one (5753,8,302,20) - OS=Win32 (8), CPU=S390 (2000)  [CPChimps, 35947] from 86.164.11.133 (ver 623:119)
Got one (5753,8,366,26) - OS=Win32 (8), CPU=S390 (87)  [agungy.ID, 38608] from 125.161.184.71 (ver 623:119)
Got one (5753,8,360,45) - OS=Win32 (8), CPU=S390 (2000)  [sculptor(OcUK), 10] from 82.5.184.191 (ver 623:119)
Got one (5753,8,237,227) - OS=Win32 (0), CPU=S390 (87)  [Vlasov_581, 37726] from 71.59.140.17 (ver 623:119)
Got one (5753,8,374,58) - OS=Win32 (0), CPU=S390 (687)  [jerem2mars02, 55305] from 88.171.12.19 (ver 623:119)
Looks like we haven't received it yet.

Vince
Top
MoneyGuyBK
Posts: 179
Joined: Sun Dec 02, 2007 6:40 am
Location: Team_XPS ..... OC, S. Calif

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by MoneyGuyBK »

Thanx for following up Vince, all is good now....







Peace
T.E.A.M. “Together Everyone Accomplishes Miracles!”
Image
OC, S. California ... God Bless All
Top
weedacres
Posts: 138
Joined: Mon Dec 24, 2007 11:18 pm
Hardware configuration: UserNames: weedacres_gpu ...
Location: Eastern Washington

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by weedacres »

gwildperson wrote:171.67.108.11 is in "reject" and 171.67.108.25 is giving you Error 503 (too busy).
Happening again this morning.
Image
Top
vvoelz
Pande Group Member
Posts: 552
Joined: Sun Dec 02, 2007 8:07 pm
Location: Temple University, Philadelphia PA

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by vvoelz »

Hmmmm -- strange. According to our log reports, it was down from 4:30 to 9:10 a.m. PCT, but now it's up again.
I'll check the server logs to see what went on, and report back. In the meantime, just expect that this might happen again.

Thanks, Vince
Top
weedacres
Posts: 138
Joined: Mon Dec 24, 2007 11:18 pm
Hardware configuration: UserNames: weedacres_gpu ...
Location: Eastern Washington

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by weedacres »

Looks like it's up now.
I just uploaded 3 wu's successfully, and the Reject status is cleared.
Image
Top
Teddy
Posts: 134
Joined: Tue Feb 12, 2008 3:05 am
Location: Canberra, Australia
Contact:
Contact Teddy

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by Teddy »

171.67.108.11 is in "reject" the problems are beginning again, many unsent work units here..

Teddy
Top
ihaque
Pande Group Member
Posts: 74
Joined: Mon Dec 03, 2007 4:20 am
Location: Stanford
Contact:
Contact ihaque

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by ihaque »

Fixed. Should be back up.
Top
Teddy
Posts: 134
Joined: Tue Feb 12, 2008 3:05 am
Location: Canberra, Australia
Contact:
Contact Teddy

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by Teddy »

Yep I get home from work & its all fixed!
Thanks Teddy :)
Top
KroontjesPen
Posts: 50
Joined: Thu Oct 30, 2008 2:29 pm
Location: Spijkenisse, The Netherlands

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by KroontjesPen »

Problem is back I think.
171.67.108.11 is in reject mode.

Code: Select all

[14:37:37] - Shutting down core 
[14:37:37] 
[14:37:37] Folding@home Core Shutdown: FINISHED_UNIT
[14:37:40] CoreStatus = 64 (100)
[14:37:40] Sending work to server
[14:37:40] Project: 5749 (Run 11, Clone 264, Gen 249)
[14:37:40] - Read packet limit of 540015616... Set to 524286976.


[14:37:40] + Attempting to send results [June 10 14:37:40 UTC]
[14:37:42] - Couldn't send HTTP request to server
[14:37:42] + Could not connect to Work Server (results)
[14:37:42]     (171.67.108.11:8080)
[14:37:42] + Retrying using alternative port
[14:37:43] - Couldn't send HTTP request to server
[14:37:43] + Could not connect to Work Server (results)
[14:37:43]     (171.67.108.11:80)
[14:37:43] - Error: Could not transmit unit 07 (completed June 10) to work server.
[14:37:43]   Keeping unit 07 in queue.
[14:37:43] Project: 5749 (Run 11, Clone 264, Gen 249)
[14:37:43] - Read packet limit of 540015616... Set to 524286976.


[14:37:43] + Attempting to send results [June 10 14:37:43 UTC]
[14:37:45] - Couldn't send HTTP request to server
[14:37:45] + Could not connect to Work Server (results)
[14:37:45]     (171.67.108.11:8080)
[14:37:45] + Retrying using alternative port
[14:37:46] - Couldn't send HTTP request to server
[14:37:46] + Could not connect to Work Server (results)
[14:37:46]     (171.67.108.11:80)
[14:37:46] - Error: Could not transmit unit 07 (completed June 10) to work server.
[14:37:46] - Read packet limit of 540015616... Set to 524286976.


[14:37:46] + Attempting to send results [June 10 14:37:46 UTC]
[14:38:29] - Couldn't send HTTP request to server
[14:38:29] + Could not connect to Work Server (results)
[14:38:29]     (171.67.108.25:8080)
[14:38:29] + Retrying using alternative port
[14:39:07] - Couldn't send HTTP request to server
[14:39:07] + Could not connect to Work Server (results)
[14:39:07]     (171.67.108.25:80)
[14:39:07]   Could not transmit unit 07 to Collection server; keeping in queue.
[14:39:07] - Preparing to get new work unit...
[14:39:07] + Attempting to get work packet
[14:39:07] - Connecting to assignment server
[14:39:08] - Successful: assigned to (171.64.65.20).
[14:39:08] + News From Folding@Home: Welcome to Folding@Home
[14:39:08] Loaded queue successfully.
[14:39:10] Project: 5749 (Run 11, Clone 264, Gen 249)
[14:39:10] - Read packet limit of 540015616... Set to 524286976.


[14:39:10] + Attempting to send results [June 10 14:39:10 UTC]
[14:39:12] - Couldn't send HTTP request to server
[14:39:12] + Could not connect to Work Server (results)
[14:39:12]     (171.67.108.11:8080)
[14:39:12] + Retrying using alternative port
[14:39:13] - Couldn't send HTTP request to server
[14:39:13] + Could not connect to Work Server (results)
[14:39:13]     (171.67.108.11:80)
[14:39:13] - Error: Could not transmit unit 07 (completed June 10) to work server.
[14:39:13] - Read packet limit of 540015616... Set to 524286976.


[14:39:13] + Attempting to send results [June 10 14:39:13 UTC]
[14:39:49] - Couldn't send HTTP request to server
[14:39:49] + Could not connect to Work Server (results)
[14:39:49]     (171.67.108.25:8080)
[14:39:49] + Retrying using alternative port
[14:40:00] Opening http://foldingforum.org/...
[14:40:27] - Couldn't send HTTP request to server
[14:40:27] + Could not connect to Work Server (results)
[14:40:27]     (171.67.108.25:80)
[14:40:27]   Could not transmit unit 07 to Collection server; keeping in queue.
[14:40:27] + Closed connections
Problem solved.
171.67.108.11 is OK.
Top
boscoj
Posts: 11
Joined: Sun Apr 05, 2009 2:07 am
Hardware configuration: Main/Daily Workstation and Primary Folder -
EVGA x58 mobo with 12GB RAM
Intel Core i7 920 stock clock on water
Adaptec 3805 SAS controller
2 x Fujitsu 15K RPM 147GB SAS in RAID0
3 x WD Caviar Black 7200 RPM 500GB SATA in RAID0
2 x EVGA 9800GT 600/1727/900
SuperSpeed RAM Drive - 2GB for temp/cache/capture stuff
Vista 64
Cooler Master HAF case

Secondary Folder -
EVGA 750i with 4GB RAM
E7400 CPU
1 x WD500 SATA
EVGA GTX 260
Windows 7
Location: Menlo Park, CA
Contact:
Contact boscoj

171.67.108.11 rejecting and 171.67.108.25 just dead?

Post by boscoj »

171.67.108.11 rejecting and 171.67.108.25 just dead?

Code: Select all

[17:26:07] + Attempting to send results [June 12 17:26:07 UTC]
[17:26:08] - Couldn't send HTTP request to server
[17:26:08] + Could not connect to Work Server (results)
[17:26:08]     (171.67.108.11:8080)
[17:26:08] + Retrying using alternative port
[17:26:09] - Couldn't send HTTP request to server
[17:26:09] + Could not connect to Work Server (results)
[17:26:09]     (171.67.108.11:80)
[17:26:09] - Error: Could not transmit unit 06 (completed June 12) to work server.
[17:26:09]   Keeping unit 06 in queue.
[17:26:09] Project: 5756 (Run 11, Clone 271, Gen 94)


[17:26:09] + Attempting to send results [June 12 17:26:09 UTC]
[17:26:10] - Couldn't send HTTP request to server
[17:26:10] + Could not connect to Work Server (results)
[17:26:10]     (171.67.108.11:8080)
[17:26:10] + Retrying using alternative port
[17:26:11] - Couldn't send HTTP request to server
[17:26:11] + Could not connect to Work Server (results)
[17:26:11]     (171.67.108.11:80)
[17:26:11] - Error: Could not transmit unit 06 (completed June 12) to work server.


[17:26:11] + Attempting to send results [June 12 17:26:11 UTC]
[17:26:11] - Couldn't send HTTP request to server
[17:26:11]   (Got status 503)
[17:26:11] + Could not connect to Work Server (results)
[17:26:11]     (171.67.108.25:8080)
[17:26:11] + Retrying using alternative port
[17:26:11] - Couldn't send HTTP request to server
[17:26:11]   (Got status 503)
[17:26:11] + Could not connect to Work Server (results)
[17:26:11]     (171.67.108.25:80)
[17:26:11]   Could not transmit unit 06 to Collection server; keeping in queue.
[17:26:11] - Preparing to get new work unit...
[17:26:11] + Attempting to get work packet
[17:26:11] - Connecting to assignment server
[17:26:12] - Successful: assigned to (171.64.122.70).
[17:26:12] + News From Folding@Home: Welcome to Folding@Home
[17:26:12] Loaded queue successfully.
[17:26:12] Project: 5756 (Run 11, Clone 271, Gen 94)


[17:26:12] + Attempting to send results [June 12 17:26:12 UTC]
[17:26:13] - Couldn't send HTTP request to server
[17:26:13] + Could not connect to Work Server (results)
[17:26:13]     (171.67.108.11:8080)
[17:26:13] + Retrying using alternative port
[17:26:14] - Couldn't send HTTP request to server
[17:26:14] + Could not connect to Work Server (results)
[17:26:14]     (171.67.108.11:80)
[17:26:14] - Error: Could not transmit unit 06 (completed June 12) to work server.


[17:26:14] + Attempting to send results [June 12 17:26:14 UTC]
[17:26:14] - Couldn't send HTTP request to server
[17:26:14]   (Got status 503)
[17:26:14] + Could not connect to Work Server (results)
[17:26:14]     (171.67.108.25:8080)
[17:26:14] + Retrying using alternative port
[17:26:14] - Couldn't send HTTP request to server
[17:26:14]   (Got status 503)
[17:26:14] + Could not connect to Work Server (results)
[17:26:14]     (171.67.108.25:80)
[17:26:14]   Could not transmit unit 06 to Collection server; keeping in queue.
[17:26:14] + Closed connections
[17:26:14] 
[17:26:14] + Processing work unit
[17:26:14] Core required: FahCore_14.exe
[17:26:14] Core found.
[17:26:14] Working on queue slot 07 [June 12 17:26:14 UTC]
[17:26:14] + Working ...
[17:26:14] 
[17:26:14] *------------------------------*
[17:26:14] Folding@Home GPU Core - Beta
[17:26:14] Version 1.25 (Mon Mar 2 19:49:32 PST 2009)
[17:26:14] 
[17:26:14] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[17:26:14] Build host: vspm46
[17:26:14] Board Type: Nvidia
[17:26:14] Core      : 
[17:26:14] Preparing to commence simulation
[17:26:14] - Looking at optimizations...
[17:26:14] - Created dyn
[17:26:14] - Files status OK
[17:26:14] - Expanded 70277 -> 360060 (decompressed 512.3 percent)
[17:26:14] Called DecompressByteArray: compressed_data_size=70277 data_size=360060, decompressed_data_size=360060 diff=0
[17:26:14] - Digital signature verified
[17:26:14] 
[17:26:14] Project: 5906 (Run 9, Clone 39, Gen 3)
[17:26:14] 
[17:26:14] Assembly optimizations on if available.
[17:26:14] Entering M.D.
[17:26:20] Tpr hash work/wudata_07.tpr:  1786069341 3499366967 1575798890 3351115706 1374819381
[17:26:21] Working on Protein
[17:26:22] Client config found, loading data.
[17:26:22] Starting GUI Server
[17:27:22] Completed 1%
[17:28:56] Completed 2%
[17:30:28] Completed 3%
[17:31:59] Completed 4%
[17:33:33] Completed 5%
[17:35:07] Completed 6%
[17:36:37] Completed 7%
[17:38:10] Completed 8%
[17:39:43] Completed 9%
[17:41:13] Completed 10%
[17:42:45] Completed 11%
[17:44:18] Completed 12%
[17:45:51] Completed 13%
[17:47:25] Completed 14%
[17:48:55] Completed 15%
[17:50:27] Completed 16%
[17:51:59] Completed 17%
[17:53:31] Completed 18%
[17:55:04] Completed 19%
[17:56:44] Completed 20%
[17:58:14] Completed 21%
[17:59:44] Completed 22%
[18:00:06] Project: 5756 (Run 11, Clone 271, Gen 94)


[18:00:06] + Attempting to send results [June 12 18:00:06 UTC]
[18:00:07] - Couldn't send HTTP request to server
[18:00:07] + Could not connect to Work Server (results)
[18:00:07]     (171.67.108.11:8080)
[18:00:07] + Retrying using alternative port
[18:00:08] - Couldn't send HTTP request to server
[18:00:08] + Could not connect to Work Server (results)
[18:00:08]     (171.67.108.11:80)
[18:00:08] - Error: Could not transmit unit 06 (completed June 12) to work server.


[18:00:08] + Attempting to send results [June 12 18:00:08 UTC]
[18:00:08] - Couldn't send HTTP request to server
[18:00:08]   (Got status 503)
[18:00:08] + Could not connect to Work Server (results)
[18:00:08]     (171.67.108.25:8080)
[18:00:08] + Retrying using alternative port
[18:00:08] - Couldn't send HTTP request to server
[18:00:08]   (Got status 503)
[18:00:08] + Could not connect to Work Server (results)
[18:00:08]     (171.67.108.25:80)
[18:00:08]   Could not transmit unit 06 to Collection server; keeping in queue.
[18:00:08] + Working...
My page at extreme overclocking
http://folding.extremeoverclocking.com/ ... =&u=444068

This post is worthless without pics. Free img hosting. email me if you have any issue.
http://www.tpiwwp.com/
Top
road-runner
Posts: 227
Joined: Sun Dec 02, 2007 4:01 am
Location: Willis, Texas

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by road-runner »

Problems here also...
Image
Top
Leoslocks
Posts: 120
Joined: Fri Jan 25, 2008 3:20 am
Hardware configuration: Q6600 | P35-DQ6 | Crucial 2 x 1 GB ram | VisionTek 3870
GPU2 Version 6.20| CPU three 6.20 Clients

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by Leoslocks »

Going to try restarting the clients to see if they will send the WU.
Top
sswilson
Posts: 90
Joined: Mon Dec 17, 2007 12:34 am
Hardware configuration: ASUS Crosshair IV Formula / AMD 1090T / 4X2 Gig GSkill Pi PC3-12800 / Corsair TX750W PSU / Sparkle GTX275 Plus / CoolerMaster Cosmos S / MCP655 WC Pump / MCR320 Rad / 6X Yate Loons / PA120.1 / 2X Scythe Ultra Kaze / Enzotech Luna WB / Dell Ultrasharp 2209WA

Gigabyte P35-DQ6 / Q6600 / 2X 1G 1066 Firestix / "Baked" XFX GTX 280 (RIP again :( ) / MSI GTS 450 Cyclone OC /PC P&C 750W Silencer / MCR220-QP-Res / DD DDCPX-Pro / Apogee GT / Highspeed PC Tech Station / Samsung 931BF / BenQ Q9T4
Location: Moncton, New Brunswick, Canada

Re: (171.67.108.11:8080) and (171.67.108.25:80)

Post by sswilson »

Same issues here with the same two servers. .11 is listed as reject, but the .25 still shows as accepting. (already restarted the client with no joy).
Top
Post Reply

Return to “Issues with a specific server”