Project 5801 issues. [Should be Offline]

Moderators: Site Moderators, FAHC Science Team

Locked
Dead Things
Posts: 18
Joined: Wed Jun 18, 2008 5:45 pm

Re: Project 5801 issues.

Post by Dead Things »

Mods - please post notice of when the 5801's have been pulled. All my cores have been shut down by either EUE limit or unstable machine errors, so I'll have to restart them all manually once the coast is clear.
Image
Top
toTOW
Site Moderator
Posts: 6359
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:
Contact toTOW

Re: Project 5801 issues.

Post by toTOW »

MichaelO wrote:This many complaints about a specific WU indicate that there really is a problem, but you obviously don't care.
Well ... if I wouldn't care, the 10th post in this thread wouldn't have been saying that I sent a message to Pande Group ... but I believe I did so : viewtopic.php?p=64542#p64542
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Top
toTOW
Site Moderator
Posts: 6359
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:
Contact toTOW

Re: Project 5801 issues.

Post by toTOW »

Teddy wrote:& these p5801's made it through beta testing, Yea right...
On this point, I have to agree with you ... I don't know where these WU comes from (I guess it's a clone project of p5800 with different simulation settings), but something has been wrong in the testing process, and assuming they would run as fine as original project was wrong :(
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Top
ei57
Posts: 64
Joined: Thu Jun 12, 2008 10:23 am

Re: Project 5801 issues.

Post by ei57 »

Dead Things wrote:Mods - please post notice of when the 5801's have been pulled. All my cores have been shut down by either EUE limit or unstable machine errors, so I'll have to restart them all manually once the coast is clear.
You may try to restart now. I've got 5506 on all mine now, but the 5801's may still come through. At least they seem to assign a mix of WU's.
Top
MoneyGuyBK
Posts: 179
Joined: Sun Dec 02, 2007 6:40 am
Location: Team_XPS ..... OC, S. Calif

Re: Project 5801 issues.

Post by MoneyGuyBK »

toTOW..... I agree that YOU have done YOUR job....
However, it seems that someone at PandeGroup/Stanford has not yet Pulled the 5801s out ....
I am just a Folder here, but I think pulling the WUs for the moment is the solution until the issue has been resolved.

Currently with the combination of the issues with the 1.15 Core and the nVidia drivers and -advmethods settings/5800 we all seem to be on needles here.....
I look at all the teams, and productions in general have dropped tremendously for all teams with heavy GPU investments.... It's not just the points... it's the Science and Humanity that suffers here :idea:




Peace
T.E.A.M. “Together Everyone Accomplishes Miracles!”
Image
OC, S. California ... God Bless All
Top
smcpoland
Posts: 22
Joined: Tue Oct 28, 2008 7:15 pm
Hardware configuration: ASUS Maximus IV
i5 2600K
16GB Corsair RAM
2 x Corsair 120GB SSD in RAID 1
EVGA 690 Extreme
Location: Riyadh, Saudi Arabia

Re: Project 5801 issues.

Post by smcpoland »

5016 received, looks like we are in business...

regards
and happy folding
Top
Cenzor
Posts: 3
Joined: Sat Aug 16, 2008 5:58 pm

Re: Project 5801 issues.

Post by Cenzor »

Agree - I'm out of the 5801-suffering too. Cheers :ewink:
Top
Pette Broad
Posts: 128
Joined: Mon Dec 03, 2007 9:38 pm
Hardware configuration: CPU folding on only one machine a laptop

GPU Hardware..
3 x 460
1 X 260
4 X 250

+ 1 X 9800GT (3 days a week)
Location: Chester U.K

Re: Project 5801 issues.

Post by Pette Broad »

smcpoland wrote:5016 received, looks like we are in business...

regards
and happy folding
Confirmed :D

Pete
Image
Top
road-runner
Posts: 227
Joined: Sun Dec 02, 2007 4:01 am
Location: Willis, Texas

Re: Project 5801 issues.

Post by road-runner »

Still getting them here...
Image
Top
Teddy
Posts: 134
Joined: Tue Feb 12, 2008 3:05 am
Location: Canberra, Australia
Contact:
Contact Teddy

Re: Project 5801 issues.

Post by Teddy »

road-runner wrote:Still getting them here...
I just tried then got 3 p5801's in a row, that machine stays OFF for now...

I'm off to work now, lets hope some normality will be restored when I get home tonite.

Teddy
Top
bollix47
Posts: 2958
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: Project 5801 issues.

Post by bollix47 »

FWIW

I too was getting 5801s with the immediate 7a core error and the 24 hour wait message even after restarting the client numerous times. (using 8800GT @ stock on Vista 32-bit)

I deleted the contents of the work folder as well as queue.dat and unitinfo.txt. (I didn't have any finished WUs waiting to be uploaded)

Started client up and immediately got assigned a 5506 from a different server and it's running fine now.
Image
Top
OLDsniper
Posts: 2
Joined: Mon Aug 04, 2008 9:39 am

Re: Project 5801 issues.

Post by OLDsniper »

I just a few 5801 and noticed had stopped so I canned them
got 1 5800 WU and 2 5506 Wu's now.
Top
BrgHW
Posts: 26
Joined: Sat Feb 02, 2008 3:12 pm
Location: Bodø, Norway

Re: Project 5801 issues.

Post by BrgHW »

Nice. Restarted all 7 GPU's now. Got 5506 and 5800 wu's. Hopfully this ends 4 days of low folding due to server problems.
Image
Top
road-runner
Posts: 227
Joined: Sun Dec 02, 2007 4:01 am
Location: Willis, Texas

Re: Project 5801 issues.

Post by road-runner »

Got 5506s now...
Image
Top
Jolly-Swagman
Posts: 11
Joined: Tue Jul 01, 2008 9:18 am

Re: Project 5801 issues.

Post by Jolly-Swagman »

there still p5801,s being given out,
Even after Delete Work folder and queue.dat you get em back and EU straight away

So will be shutting down till they have stopped them
Image
Top
Locked

Return to “Issues with a specific WU”