WUs stop checkpointing and stall at 99%

Moderators: Site Moderators, FAHC Science Team

Post Reply
bikeaddict
Posts: 210
Joined: Sun May 03, 2020 1:20 am

WUs stop checkpointing and stall at 99%

Post by bikeaddict »

More than once recently I've seen WUs that are stuck at 99% for a long time. The log shows the progress stop between 92-98%. Then if it's paused and resumed, it restarts at 92-98% and will then finish. The most recent one is Project: 12414 (Run 8, Clone 1, Gen 21) that stopped and restarted at 92%.
Joe_H
Site Admin
Posts: 7995
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Studio M1 Max 32 GB smp6
Mac Hack i7-7700K 48 GB smp4
Location: W. MA

Re: WUs stop checkpointing and stall at 99%

Post by Joe_H »

If this was a GPU project I would guess that the driver had crashed. That sometimes happens with an excessive overclock or high operating temperatures. But Project 12414 is a CPU project. I would suggest checking your system logs to see if a crash of the folding core process was recorded at about the time progress stopped in the log.
Image
toTOW
Site Moderator
Posts: 6395
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: WUs stop checkpointing and stall at 99%

Post by toTOW »

Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Post Reply