failure to upload 206.223.170.146

Moderators: Site Moderators, FAHC Science Team

verdeva
Posts: 30
Joined: Mon Dec 03, 2007 1:40 pm
Location: Seattle, WA

failure to upload 206.223.170.146

Post by verdeva »

Things have been going great for the past couple of weeks, but this just cropped up today:

Code: Select all

18:47:17:WU01:FS00:0xa7:Completed 242500 out of 250000 steps (97%)
18:48:04:WU01:FS00:0xa7:Completed 245000 out of 250000 steps (98%)
18:48:50:WU01:FS00:0xa7:Completed 247500 out of 250000 steps (99%)
18:49:37:WU01:FS00:0xa7:Completed 250000 out of 250000 steps (100%)
18:49:38:WU01:FS00:0xa7:Saving result file ../logfile_01.txt
18:49:38:WU01:FS00:0xa7:Saving result file frame208.trr
18:49:38:WU01:FS00:0xa7:Saving result file frame208.xtc
18:49:38:WU01:FS00:0xa7:Saving result file md.log
18:49:38:WU01:FS00:0xa7:Saving result file science.log
18:49:38:WU01:FS00:0xa7:Folding@home Core Shutdown: FINISHED_UNIT
18:49:38:WU01:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
18:49:38:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14255 run:0 clone:2047 gen:208 core:0xa7 unit:0x000000f3cedfaa9200000000000007ff
18:49:38:WU01:FS00:Uploading 2.85MiB to 206.223.170.146
18:49:38:WU01:FS00:Connecting to 206.223.170.146:8080
18:51:48:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
18:51:48:WU01:FS00:Connecting to 206.223.170.146:80
18:53:59:WARNING:WU01:FS00:Exception: Failed to send results to work server: Failed to connect to 206.223.170.146:80: Connection timed out
18:53:59:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14255 run:0 clone:2047 gen:208 core:0xa7 unit:0x000000f3cedfaa9200000000000007ff
18:53:59:WU01:FS00:Uploading 2.85MiB to 206.223.170.146
18:53:59:WU01:FS00:Connecting to 206.223.170.146:8080
18:56:10:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
18:56:10:WU01:FS00:Connecting to 206.223.170.146:80
18:58:21:WARNING:WU01:FS00:Exception: Failed to send results to work server: Failed to connect to 206.223.170.146:80: Connection timed out
18:58:21:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14255 run:0 clone:2047 gen:208 core:0xa7 unit:0x000000f3cedfaa9200000000000007ff
18:58:21:WU01:FS00:Uploading 2.85MiB to 206.223.170.146
18:58:21:WU01:FS00:Connecting to 206.223.170.146:8080
19:00:32:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
19:00:32:WU01:FS00:Connecting to 206.223.170.146:80
19:02:43:WARNING:WU01:FS00:Exception: Failed to send results to work server: Failed to connect to 206.223.170.146:80: Connection timed out
19:02:44:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14255 run:0 clone:2047 gen:208 core:0xa7 unit:0x000000f3cedfaa9200000000000007ff
19:02:44:WU01:FS00:Uploading 2.85MiB to 206.223.170.146
19:02:44:WU01:FS00:Connecting to 206.223.170.146:8080
19:04:54:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
19:04:54:WU01:FS00:Connecting to 206.223.170.146:80
19:07:05:WARNING:WU01:FS00:Exception: Failed to send results to work server: Failed to connect to 206.223.170.146:80: Connection timed out
19:07:06:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14255 run:0 clone:2047 gen:208 core:0xa7 unit:0x000000f3cedfaa9200000000000007ff
19:07:06:WU01:FS00:Uploading 2.85MiB to 206.223.170.146
19:07:06:WU01:FS00:Connecting to 206.223.170.146:8080
19:09:16:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
19:09:16:WU01:FS00:Connecting to 206.223.170.146:80
19:11:28:WARNING:WU01:FS00:Exception: Failed to send results to work server: Failed to connect to 206.223.170.146:80: Connection timed out
19:11:28:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14255 run:0 clone:2047 gen:208 core:0xa7 unit:0x000000f3cedfaa9200000000000007ff
19:11:28:WU01:FS00:Uploading 2.85MiB to 206.223.170.146
19:11:28:WU01:FS00:Connecting to 206.223.170.146:8080
19:13:39:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
19:13:39:WU01:FS00:Connecting to 206.223.170.146:80
19:15:50:WARNING:WU01:FS00:Exception: Failed to send results to work server: Failed to connect to 206.223.170.146:80: Connection timed out
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: failure to upload 206.223.170.146

Post by Neil-B »

That server is currently showing as down on server status page ... the client will periodically try to upload the wu results until the server is up again and the upload can be recieved
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
Badsinger
Posts: 20
Joined: Tue May 19, 2020 9:01 am

Re: failure to upload 206.223.170.146

Post by Badsinger »

Its been 24 attempts now to upload for me. Out of curiosity, should a second server fail, as the gpu continues to fold, will it save both tasks or is one lost?
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: failure to upload 206.223.170.146

Post by Neil-B »

It will save both WU .. it will keep retrying until either it uploads or until the expiration deadline is reached at which point the client will dump the wu .. hopefully the server will be up and receiving before then but it kind of depends why the server is down and it is the weekend so fixes tend to be slower
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
psaam0001
Posts: 378
Joined: Mon May 18, 2020 2:02 am
Location: Ruckersville, Virginia, USA

Re: failure to upload 206.223.170.146

Post by psaam0001 »

I also have a WU needing to be returned as completed, but I'm not going to sweat it.

Stay calm... Keep folding!!!

Paul
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: failure to upload 206.223.170.146

Post by Neil-B »

I have seen a post on discord which confirms the server is under maintenance .. it is simply a matter of waiting .. there is nothing you can do to get it to upload until the server is back up
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
MoelTryfan
Posts: 11
Joined: Sun Apr 19, 2020 11:00 am

Re: failure to upload 206.223.170.146

Post by MoelTryfan »

They'd better get a move on. My WU expires at 1826 today.
Gnomuz
Posts: 31
Joined: Sat Nov 21, 2020 5:07 pm

Re: failure to upload 206.223.170.146

Post by Gnomuz »

Same here with a WU (Project: 14254 (Run 0, Clone 2459, Gen 172)) finished yesterday at 11/20/2020 19:11. F@H has been retrying to upload the results for more 23 hours now.
Folding keeps on running and uploading to other servers, so let's be patient. But I admit it's easier for me as the expiration is on 11/27/2020 18:17, which gives them more time to fix the issue than MoelTryfan :wink:
ViTe
Posts: 20
Joined: Tue Feb 14, 2012 2:22 am

Re: failure to upload 206.223.170.146

Post by ViTe »

I have the same issue and my WU pretty close to time out. I think to have a different collection server should be mandatory.
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: failure to upload 206.223.170.146

Post by Neil-B »

It doesn't always work that way and isnt always possible or actually the best thing for the science .. reaching timeout isnt when the client dumps wu it is the expiration deadline .. CS can sometimes cause more issues than benefits
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
PFM
Posts: 38
Joined: Sat Jan 03, 2009 3:14 am
Hardware configuration: MacBook Air 2020 i5 Quad Core
Lenovo SL410 Intel P9600 Core 2 Duo
Location: Bay Area, USA

Re: failure to upload 206.223.170.146

Post by PFM »

Any ETA on this ?
uploads failing for me too on this server....
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: failure to upload 206.223.170.146

Post by Neil-B »

unfortunately fah doesn't tend to do etas .. rest assured they will get it up as quick as they can .. but it is the weekend and that does slow things down especially with the current pandemic .. the researchers will be even more gutted than the folders - but sometimes these things just happen
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
tmccarty729
Posts: 1
Joined: Sat Nov 21, 2020 10:31 pm

Re: failure to upload 206.223.170.146

Post by tmccarty729 »

Stuck sending to 170.146 also.
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: failure to upload 206.223.170.146

Post by Neil-B »

Server still under maintenance
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
MoelTryfan
Posts: 11
Joined: Sun Apr 19, 2020 11:00 am

Re: failure to upload 206.223.170.146

Post by MoelTryfan »

Still down at 1535 UTC
Post Reply