FAH infrastructure failed to load clients with payload WUs

[wezh]

Hi! Thank you for the idea of share folding power!

I start folding at home since about 15 of March, 2020. My client processed about 30-40 WUs and successfully uploaded results. I fold anonymously.

Besides constantly log messages such as

Code: Select all

WU00:FS00:Connecting to 65.254.110.245:8080
WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
WU00:FS00:Connecting to 18.218.241.186:80
WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
ERROR:WU00:FS00:Exception: Could not get an assignment
WU00:FS00:Connecting to 65.254.110.245:8080
WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
WU00:FS00:Connecting to 18.218.241.186:80
WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
ERROR:WU00:FS00:Exception: Could not get an assignment

even my small power client wasting about 50% of time waiting to upload and to get new WU, during which it could folding new WU, but can't get it to start folding.

1) If your servers can't answer to all clients with new WU, then did you ask any of cloud engines (Google, MS, etc.) to temporary get a part of their storage space and connection servers infrastructure??? Does all of them against mankind, so human made company against themselves so they will not share a part of their resources?

It was about server side. Now about client side: FAH client.

2) Why unsuccessful tries to get new WU increase delay so much to re-request new WU next time? Starting from 5 minutes, goes through 10 and 30 minutes - I think it is ok to do not make DDoS of servers. But why further delay steps becomes about 4 hours of waiting before to request new WU? Why so much wasting time?

3) If to fold with --idle flag (waiting default 300 secs of PC idle) then does operation of uploading results and downloading new WU postpones to idle state instead of get it as fast as possible while server can share it and only then to wait for idle for folding? So, does FAH client works smart to upload results and download new WU instantly even client uses --idle flag for folding?

4) I got something weird behaviour: download action completely hangs on:

Code: Select all

07:06:51:WU01:FS00:0xa7:Completed 485000 out of 500000 steps (97%)
07:09:15:WU01:FS00:0xa7:Completed 490000 out of 500000 steps (98%)
07:11:38:WU01:FS00:0xa7:Completed 495000 out of 500000 steps (99%)
07:11:38:WU00:FS00:Connecting to 65.254.110.245:8080
07:11:40:WU00:FS00:Assigned to work server 128.252.203.9
07:11:40:WU00:FS00:Requesting new work unit for slot 00: RUNNING cpu:2 from 128.252.203.9
07:11:40:WU00:FS00:Connecting to 128.252.203.9:8080
[93m07:13:50:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80[0m
07:13:50:WU00:FS00:Connecting to 128.252.203.9:80
07:14:02:WU01:FS00:0xa7:Completed 500000 out of 500000 steps (100%)
07:14:02:WU01:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
07:14:02:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14576 run:0 clone:502 gen:3 core:0xa7 unit:0x00000008287234c95e79239046322a1e
07:14:02:WU01:FS00:Uploading 1.61MiB to 40.114.52.201
07:14:02:WU01:FS00:Connecting to 40.114.52.201:8080
07:14:22:WU01:FS00:Upload 27.10%
07:14:30:WU01:FS00:Upload 77.43%
07:14:43:WU01:FS00:Upload complete
07:14:43:WU01:FS00:Server responded WORK_ACK (400)
07:14:43:WU01:FS00:Final credit estimate, 1517.00 points
07:14:43:WU01:FS00:Cleaning up
[91m07:16:00:ERROR:WU00:FS00:Exception: Failed to connect to 128.252.203.9:80: Connection timed out[0m
07:16:00:WU00:FS00:Connecting to 65.254.110.245:8080
[93m07:18:10:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': Failed to connect to 65.254.110.245:8080: Connection timed out[0m
07:18:10:WU00:FS00:Connecting to 18.218.241.186:80
[93m07:18:10:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration[0m
[91m07:18:10:ERROR:WU00:FS00:Exception: Could not get an assignment[0m
07:18:10:WU00:FS00:Connecting to 65.254.110.245:8080
[93m07:18:27:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration[0m
07:18:27:WU00:FS00:Connecting to 18.218.241.186:80
[93m07:18:28:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration[0m
[91m07:18:28:ERROR:WU00:FS00:Exception: Could not get an assignment[0m
07:19:47:WU00:FS00:Connecting to 65.254.110.245:8080
[93m07:19:53:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration[0m
07:19:53:WU00:FS00:Connecting to 18.218.241.186:80
[93m07:19:53:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration[0m
[91m07:19:53:ERROR:WU00:FS00:Exception: Could not get an assignment[0m
07:22:25:WU00:FS00:Connecting to 65.254.110.245:8080
07:23:41:WU00:FS00:Assigned to work server 128.252.203.9
07:23:41:WU00:FS00:Requesting new work unit for slot 00: READY cpu:2 from 128.252.203.9
07:23:41:WU00:FS00:Connecting to 128.252.203.9:8080
07:25:21:WU00:FS00:Downloading 8.14MiB
07:25:27:WU00:FS00:Download 14.59%
******************************* Date: 2020-03-30 *******************************
14:18:59:Caught signal SIGINT(2) on PID 220921
14:18:59:Exiting, please wait. . .
14:28:15:Caught signal SIGINT(2) on PID 220921
[93m14:28:15:WARNING:Next signal will force exit[0m

After pc reboot I restart FAH clint and it starts normally, got new WU and starts folding.

5) Why last update of FAH client dated as 2018 year? Do you think FAH client is good enough to let it be as was a long time ago? In 2018 it was close to perfect?

-----
OS:
Manjaro Linux 19.0.2 (stable branch)

Kernel:
Linux version 5.5.13-1-MANJARO (builder@0703b3980d8b) (gcc version 9.3.0 (Arch Linux 9.3.0-1)) #1 SMP PREEMPT Wed Mar 25 17:14:28 UTC 2020

FAHControl package (currently 7.5.1-1):

Code: Select all

https://aur.archlinux.org/packages/fahcontrol

FAHClient package (currently 7.5.1-3):

Code: Select all

https://aur.archlinux.org/packages/fahclient

Hardware:
Fanless (passive cooling) mini-pc having full-metal aluminium case. Videocard is embedded in CPU chip of Intel Core i5-8250U (Hyper-threading is off in UEFI, so 4 physical cores = 4 program threads). Folding using as 2-3 cores of CPU. To prevent overheating using built-in CPU modes in UEFI: normal TDP is 15W, switched to configurable TDP-down mode which is 10W. All 4 cores loaded with FAH to 100% for hours of working has temperature no more than 56C. Average clock speed of every core is 1700..1900 MHz. Temperature of air in room is 20-23C.[/i]

Again, thank you for your project of sharing folding power to help people to be more healthy!

[davidcoton]

1) If your servers can't answer to all clients with new WU, then did you ask any of cloud engines (Google, MS, etc.) to temporary get a part of their storage space and connection servers infrastructure??? Does all of them against mankind, so human made company against themselves so they will not share a part of their resources?

Many offers have been received. There are limited F@H staff to bring up new servers. It is being done as fast as possible.

2) Why unsuccessful tries to get new WU increase delay so much to re-request new WU next time? Starting from 5 minutes, goes through 10 and 30 minutes - I think it is ok to do not make DDoS of servers. But why further delay steps becomes about 4 hours of waiting before to request new WU? Why so much wasting time?

The algorithm is designed to protect servers that go offline, so they are not swamped when they come back. If the server is overloaded, then more retries won't help.

3) If to fold with --idle flag (waiting default 300 secs of PC idle) then does operation of uploading results and downloading new WU postpones to idle state instead of get it as fast as possible while server can share it and only then to wait for idle for folding? So, does FAH client works smart to upload results and download new WU instantly even client uses --idle flag for folding?

Sorry, don't know. I don't use "--idle". you should be able to tell by observation.

4) I got something weird behaviour: download action completely hangs on:

Code: Select all

07:06:51:WU01:FS00:0xa7:Completed 485000 out of 500000 steps (97%)
07:09:15:WU01:FS00:0xa7:Completed 490000 out of 500000 steps (98%)
07:11:38:WU01:FS00:0xa7:Completed 495000 out of 500000 steps (99%)
07:11:38:WU00:FS00:Connecting to 65.254.110.245:8080
07:11:40:WU00:FS00:Assigned to work server 128.252.203.9
07:11:40:WU00:FS00:Requesting new work unit for slot 00: RUNNING cpu:2 from 128.252.203.9
07:11:40:WU00:FS00:Connecting to 128.252.203.9:8080
[93m07:13:50:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80[0m
07:13:50:WU00:FS00:Connecting to 128.252.203.9:80
07:14:02:WU01:FS00:0xa7:Completed 500000 out of 500000 steps (100%)
07:14:02:WU01:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
07:14:02:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14576 run:0 clone:502 gen:3 core:0xa7 unit:0x00000008287234c95e79239046322a1e
07:14:02:WU01:FS00:Uploading 1.61MiB to 40.114.52.201
07:14:02:WU01:FS00:Connecting to 40.114.52.201:8080
07:14:22:WU01:FS00:Upload 27.10%
07:14:30:WU01:FS00:Upload 77.43%
07:14:43:WU01:FS00:Upload complete
07:14:43:WU01:FS00:Server responded WORK_ACK (400)
07:14:43:WU01:FS00:Final credit estimate, 1517.00 points
07:14:43:WU01:FS00:Cleaning up
[91m07:16:00:ERROR:WU00:FS00:Exception: Failed to connect to 128.252.203.9:80: Connection timed out[0m
07:16:00:WU00:FS00:Connecting to 65.254.110.245:8080
[93m07:18:10:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': Failed to connect to 65.254.110.245:8080: Connection timed out[0m
07:18:10:WU00:FS00:Connecting to 18.218.241.186:80
[93m07:18:10:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration[0m
[91m07:18:10:ERROR:WU00:FS00:Exception: Could not get an assignment[0m
07:18:10:WU00:FS00:Connecting to 65.254.110.245:8080
[93m07:18:27:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration[0m
07:18:27:WU00:FS00:Connecting to 18.218.241.186:80
[93m07:18:28:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration[0m
[91m07:18:28:ERROR:WU00:FS00:Exception: Could not get an assignment[0m
07:19:47:WU00:FS00:Connecting to 65.254.110.245:8080
[93m07:19:53:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration[0m
07:19:53:WU00:FS00:Connecting to 18.218.241.186:80
[93m07:19:53:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration[0m
[91m07:19:53:ERROR:WU00:FS00:Exception: Could not get an assignment[0m
07:22:25:WU00:FS00:Connecting to 65.254.110.245:8080
07:23:41:WU00:FS00:Assigned to work server 128.252.203.9
07:23:41:WU00:FS00:Requesting new work unit for slot 00: READY cpu:2 from 128.252.203.9
07:23:41:WU00:FS00:Connecting to 128.252.203.9:8080
07:25:21:WU00:FS00:Downloading 8.14MiB
07:25:27:WU00:FS00:Download 14.59%
******************************* Date: 2020-03-30 *******************************
14:18:59:Caught signal SIGINT(2) on PID 220921
14:18:59:Exiting, please wait. . .
14:28:15:Caught signal SIGINT(2) on PID 220921
[93m14:28:15:WARNING:Next signal will force exit[0m

After pc reboot I restart FAH clint and it starts normally, got new WU and starts folding.

Random hang, quite possibly related to server overload.

5) Why last update of FAH client dated as 2018 year? Do you think FAH client is good enough to let it be as was a long time ago? In 2018 it was close to perfect?

Do you have specific problems with the client? There is no point in changing it unless something can be improved, and that improvement is worth the effort involved. The programmer time available to F@H is limited, and has to cover cores, client, Control, and various servers. Client side software is supported on three major platforms over several versions. Client changes are on hold during the present crisis, to avoid any possibility of problems on rollout.

Some of these answers are posted previously, may I suggest that a search is a good use of time before firing off long lists of questions.

[Joe_H]

4) I got something weird behaviour: download action completely hangs on:

There is a known bug in FAHClient that pops now and again on downloads and uploads. Occasionally the client does not detect a connection that has stalled or broken, often connected to high network traffic, and never auto-retries the connection. Normally the client will retry within 15-30 minutes. If you have multiple folding slots, the failure to retry only affects the one slot.

At this point the only way to get the request to resume is to either restart the FAHClient process after pausing any active work, or reboot your system.

[wezh]

davidcoton, Joe_H thanks for clarifications!

Do you have specific problems with the client?

Joe_H confirmed client's lack in (4)th item.
Also (2)th item: still think what 4 hours delay to check connection is too much wasting time. may be 1 hour is better. But you know better than me. I just suggest w/o detailed knowledge of what's going on.
(3)th item - possible client's lack. Will investigate by observation.

Some of these answers are posted previously, may I suggest that a search is a good use of time before firing off long lists of questions.

Yeah, my fault. Emotionally want faster to share my experience (lacks) instead of searching and reading tens of minutes for old, moderate and new threads.

Thank you all!
Folding with you.

[Neil-B]

There are always new clients under development but with limited resources it takes a long time and for the most part, before the recent "upswell" (I think of it as the mother of all tidal waves) in community size. the client (though not without its faults) coped admirably and was fit for purpose .. Less than a month ago this was still true, but now after a 20x growth in the numbers of people trying to fold its flaws become very easy to criticise - but I would suggest that it is still doing remarkably well under the circumstances ... I am sure as the team get a chance to address the various issues that have occurred whilst they are scale up to meet demand the next version of the FAHClient will incorporate the lessons learned.

The FAHClient is one part of a fairly complex whole - one that is currently the fastest compute resource on the planet (and probably can be faster once the issues are worked through) and has many components (the ones that do the actual science and manage throughput) that are likely to be more recently released versions than the FAHClient.

[davidcoton]

To add to the point, a new client will not go into test while there is so much really urgent work to process (there is no spare test resource, and a risk of breaking things), and all available programming effort will go into urgent server upgrades. The client is only doing what is has done for a long time, no individual client is doing extra work and its server interface is not known to have problems. The servers, OTOH, are handling 20x as much work (or even more -- many of the new clients are high-end) and have benefited / will benefit from some urgent work.

[wezh]

Neil-B, davidcoton, I got it. Thanks!

[wezh]

I've completed investigation on how idle mode of folding affects network activity of FAHClient.

Before WU processing will be completed, I stop folding and execute it in idle mode with 2 minutes idle delay.

Shortened log:

Code: Select all

$ FAHClient -v --idle --idle-seconds 120
14:59:40:INFO(1):Read GPUs.txt
14:59:40:Removing old file 'logs/log-20200330-160705.txt'
...
14:59:40:Enabled folding slot 00: PAUSED cpu:4 (waiting for idle)
...
15:01:42:WU00:FS00:Starting
...
15:01:42:WU00:FS00:FahCore 0xa7 started
...
15:01:44:WU00:FS00:0xa7:Completed 492552 out of 500000 steps (98%)
15:03:19:WU00:FS00:0xa7:Completed 495000 out of 500000 steps (99%)
15:03:20:WU01:FS00:Connecting to 65.254.110.245:8080
15:03:20:WU01:FS00:Assigned to work server 40.114.52.201
15:03:20:WU01:FS00:Requesting new work unit for slot 00: RUNNING cpu:4 from 40.114.52.201
15:03:20:WU01:FS00:Connecting to 40.114.52.201:8080
>>>>>>>> 15:03:28:FS00:Shutting core down
15:03:28:WU00:FS00:0xa7:Caught signal SIGINT(2) on PID 220230
15:03:28:WU00:FS00:0xa7:Exiting, please wait. . .
15:03:29:WU00:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
>>>>>>>> 15:03:30:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
>>>>>>>> 15:03:45:WU01:FS00:Downloading 2.14MiB
>>>>>>>> 15:03:49:WU01:FS00:Download complete
15:03:49:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:13850 run:0 clone:23970 gen:5 core:0xa7 unit:0x0000000b287234c95e788b551106bb3e
15:05:51:WU00:FS00:Starting
...
15:05:51:WU00:FS00:FahCore 0xa7 started
...
15:05:53:WU00:FS00:0xa7:Completed 495222 out of 500000 steps (99%)
15:09:04:WU00:FS00:0xa7:Completed 500000 out of 500000 steps (100%)
15:09:06:WU00:FS00:0xa7:Saving result file ../logfile_01.txt
15:09:06:WU00:FS00:0xa7:Saving result file frame11.edr
15:09:06:WU00:FS00:0xa7:Saving result file frame11.trr
15:09:06:WU00:FS00:0xa7:Saving result file frame11.xtc
15:09:06:WU00:FS00:0xa7:Saving result file md.log
15:09:06:WU00:FS00:0xa7:Saving result file science.log
15:09:06:WU00:FS00:0xa7:Folding@home Core Shutdown: FINISHED_UNIT
15:09:06:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
15:09:06:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:13851 run:0 clone:39680 gen:11 core:0xa7 unit:0x00000010287234c95e7879ba5413fe01
15:09:06:WU00:FS00:Uploading 2.51MiB to 40.114.52.201
15:09:06:WU00:FS00:Connecting to 40.114.52.201:8080
15:09:06:WU01:FS00:Starting
15:09:06:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/home/m/.FAHClient startup folder/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7" -dir 01 -suffix 01 -version 705 -lifeline 219961 -checkpoint 30 -np 4
15:09:06:WU01:FS00:Started FahCore on PID 221235
...
15:09:06:WU01:FS00:FahCore 0xa7 started
...
15:09:08:WU01:FS00:0xa7:Completed 1 out of 500000 steps (0%)
15:09:14:FS00:Shutting core down
15:09:14:WU01:FS00:0xa7:Caught signal SIGINT(2) on PID 221239
15:09:14:WU01:FS00:0xa7:Exiting, please wait. . .
15:09:15:WU01:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
15:09:15:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
15:11:16:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
15:11:16:WU00:FS00:Connecting to 40.114.52.201:80
15:11:23:WU00:FS00:Upload 2.49%
15:11:24:WU01:FS00:Starting
...
15:11:24:WU01:FS00:FahCore 0xa7 started
...
15:11:26:WU01:FS00:0xa7:Completed 142 out of 500000 steps (0%)
<<<<<<<< 15:11:27:FS00:Shutting core down
15:11:27:WU01:FS00:0xa7:Caught signal SIGINT(2) on PID 221554
15:11:27:WU01:FS00:0xa7:Exiting, please wait. . .
15:11:28:WU01:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
<<<<<<<< 15:11:28:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
<<<<<<<< 15:11:41:WU00:FS00:Upload 7.46%
<<<<<<<< 15:11:47:WU00:FS00:Upload 22.38%
<<<<<<<< 15:12:04:WU00:FS00:Upload 32.33%
<<<<<<<< 15:12:10:WU00:FS00:Upload 34.82%
<<<<<<<< 15:12:18:WU00:FS00:Upload 42.28%
<<<<<<<< 15:12:26:WU00:FS00:Upload 59.69%
<<<<<<<< 15:12:34:WU00:FS00:Upload 72.12%
<<<<<<<< 15:12:46:WU00:FS00:Upload 84.55%
<<<<<<<< 15:12:53:WU00:FS00:Upload 92.01%
<<<<<<<< 15:13:11:WU00:FS00:Upload complete
15:13:11:WU00:FS00:Server responded WORK_ACK (400)
15:13:11:WU00:FS00:Final credit estimate, 4653.00 points
15:13:11:WU00:FS00:Cleaning up
<<<<<<<< 15:13:38:WU01:FS00:Starting
...
<<<<<<<< 15:13:38:WU01:FS00:FahCore 0xa7 started
...
15:13:40:WU01:FS00:0xa7:Completed 182 out of 500000 steps (0%)
15:16:54:WU01:FS00:0xa7:Completed 5000 out of 500000 steps (1%)
15:20:19:WU01:FS00:0xa7:Completed 10000 out of 500000 steps (2%)
...

I do no see an option to attach a file. Pasting full log into message body:

Code: Select all

$ FAHClient -v --idle --idle-seconds 120
14:59:40:INFO(1):Read GPUs.txt
14:59:40:Removing old file 'logs/log-20200330-160705.txt'
14:59:40:************************* Folding@home Client *************************
14:59:40:    Website: https://foldingathome.org/
14:59:40:  Copyright: (c) 2009-2018 foldingathome.org
14:59:40:     Author: Joseph Coffland <[email protected]>
14:59:40:       Args: -v --idle --idle-seconds 120
14:59:40:     Config: /home/m/.FAHClient startup folder/config.xml
14:59:40:******************************** Build ********************************
14:59:40:    Version: 7.5.1
14:59:40:       Date: May 11 2018
14:59:40:       Time: 19:59:04
14:59:40: Repository: Git
14:59:40:   Revision: 4705bf53c635f88b8fe85af7675557e15d491ff0
14:59:40:     Branch: master
14:59:40:   Compiler: GNU 6.3.0 20170516
14:59:40:    Options: -std=gnu++98 -O3 -funroll-loops
14:59:40:   Platform: linux2 4.14.0-3-amd64
14:59:40:       Bits: 64
14:59:40:       Mode: Release
14:59:40:******************************* System ********************************
14:59:40:        CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
14:59:40:     CPU ID: GenuineIntel Family 6 Model 142 Stepping 10
14:59:40:       CPUs: 4
14:59:40:     Memory: 31.12GiB
14:59:40:Free Memory: 8.54GiB
14:59:40:    Threads: POSIX_THREADS
14:59:40: OS Version: 5.5
14:59:40:Has Battery: false
14:59:40: On Battery: false
14:59:40: UTC Offset: 0
14:59:40:        PID: 219961
14:59:40:        CWD: /home/m/.FAHClient startup folder
14:59:40:         OS: Linux 5.5.13-1-MANJARO x86_64
14:59:40:    OS Arch: AMD64
14:59:40:       GPUs: 0
14:59:40:       CUDA: Not detected: Failed to open dynamic library 'libcuda.so':
14:59:40:             libcuda.so: cannot open shared object file: No such file or
14:59:40:             directory
14:59:40:     OpenCL: Not detected: Failed to open dynamic library 'libOpenCL.so':
14:59:40:             libOpenCL.so: cannot open shared object file: No such file or
14:59:40:             directory
14:59:40:***********************************************************************
14:59:40:Started thread 1 on PID 219961
14:59:40:<config>
14:59:40:  <!-- Client Control -->
14:59:40:  <client-threads v='6'/>
14:59:40:  <cycle-rate v='4'/>
14:59:40:  <cycles v='-1'/>
14:59:40:  <data-directory v='.'/>
14:59:40:  <disable-sleep-when-active v='true'/>
14:59:40:  <exec-directory v='/usr/bin'/>
14:59:40:  <exit-when-done v='false'/>
14:59:40:  <fold-anon v='false'/>
14:59:40:  <idle-seconds v='120'/>
14:59:40:  <open-web-control v='false'/>
14:59:40:
14:59:40:  <!-- Configuration -->
14:59:40:  <config-rotate v='true'/>
14:59:40:  <config-rotate-dir v='configs'/>
14:59:40:  <config-rotate-max v='16'/>
14:59:40:
14:59:40:  <!-- Debugging -->
14:59:40:  <assignment-servers>
14:59:40:    assign1.foldingathome.org:8080 assign2.foldingathome.org:80
14:59:40:  </assignment-servers>
14:59:40:  <auth-as v='true'/>
14:59:40:  <capture-directory v='capture'/>
14:59:40:  <capture-on-error v='false'/>
14:59:40:  <capture-packets v='false'/>
14:59:40:  <capture-requests v='false'/>
14:59:40:  <capture-responses v='false'/>
14:59:40:  <capture-sockets v='false'/>
14:59:40:  <core-exec v='FahCore_$type'/>
14:59:40:  <core-wrapper-exec v='FAHCoreWrapper'/>
14:59:40:  <debug-sockets v='false'/>
14:59:40:  <exception-locations v='true'/>
14:59:40:  <stack-traces v='false'/>
14:59:40:
14:59:40:  <!-- Error Handling -->
14:59:40:  <max-slot-errors v='10'/>
14:59:40:  <max-unit-errors v='5'/>
14:59:40:
14:59:40:  <!-- Folding Core -->
14:59:40:  <checkpoint v='30'/>
14:59:40:  <core-dir v='cores'/>
14:59:40:  <core-priority v='idle'/>
14:59:40:  <cpu-affinity v='false'/>
14:59:40:  <cpu-usage v='100'/>
14:59:40:  <gpu-usage v='100'/>
14:59:40:  <no-assembly v='false'/>
14:59:40:
14:59:40:  <!-- Folding Slot Configuration -->
14:59:40:  <cause v='ANY'/>
14:59:40:  <client-subtype v='LINUX'/>
14:59:40:  <client-type v='normal'/>
14:59:40:  <cpu-species v='X86_PENTIUM_II'/>
14:59:40:  <cpu-type v='AMD64'/>
14:59:40:  <cpus v='-1'/>
14:59:40:  <disable-viz v='false'/>
14:59:40:  <gpu v='true'/>
14:59:40:  <max-packet-size v='normal'/>
14:59:40:  <os-species v='UNKNOWN'/>
14:59:40:  <os-type v='LINUX'/>
14:59:40:  <project-key v='0'/>
14:59:40:  <smp v='true'/>
14:59:40:
14:59:40:  <!-- GUI -->
14:59:40:  <gui-enabled v='true'/>
14:59:40:
14:59:40:  <!-- HTTP Server -->
14:59:40:  <allow v='127.0.0.1'/>
14:59:40:  <connection-timeout v='60'/>
14:59:40:  <deny v='0/0'/>
14:59:40:  <http-addresses v='0:7396'/>
14:59:40:  <https-addresses v=''/>
14:59:40:  <max-connect-time v='900'/>
14:59:40:  <max-connections v='800'/>
14:59:40:  <max-request-length v='52428800'/>
14:59:40:  <min-connect-time v='300'/>
14:59:40:
14:59:40:  <!-- Logging -->
14:59:40:  <log v='log.txt'/>
14:59:40:  <log-color v='true'/>
14:59:40:  <log-crlf v='false'/>
14:59:40:  <log-date v='false'/>
14:59:40:  <log-date-periodically v='21600'/>
14:59:40:  <log-domain v='false'/>
14:59:40:  <log-header v='true'/>
14:59:40:  <log-level v='true'/>
14:59:40:  <log-no-info-header v='true'/>
14:59:40:  <log-redirect v='false'/>
14:59:40:  <log-rotate v='true'/>
14:59:40:  <log-rotate-dir v='logs'/>
14:59:40:  <log-rotate-max v='16'/>
14:59:40:  <log-short-level v='false'/>
14:59:40:  <log-simple-domains v='true'/>
14:59:40:  <log-thread-id v='false'/>
14:59:40:  <log-thread-prefix v='true'/>
14:59:40:  <log-time v='true'/>
14:59:40:  <log-to-screen v='true'/>
14:59:40:  <log-truncate v='false'/>
14:59:40:  <verbosity v='5'/>
14:59:40:
14:59:40:  <!-- Network -->
14:59:40:  <proxy v=':8080'/>
14:59:40:  <proxy-enable v='false'/>
14:59:40:  <proxy-pass v=''/>
14:59:40:  <proxy-user v=''/>
14:59:40:
14:59:40:  <!-- Process Control -->
14:59:40:  <child v='false'/>
14:59:40:  <daemon v='false'/>
14:59:40:  <fork v='false'/>
14:59:40:  <pid v='false'/>
14:59:40:  <pid-file v='Folding@home Client.pid'/>
14:59:40:  <respawn v='false'/>
14:59:40:  <service v='false'/>
14:59:40:
14:59:40:  <!-- Remote Command Server -->
14:59:40:  <command-address v='0.0.0.0'/>
14:59:40:  <command-allow-no-pass v='127.0.0.1'/>
14:59:40:  <command-deny-no-pass v='0/0'/>
14:59:40:  <command-enable v='true'/>
14:59:40:  <command-port v='36330'/>
14:59:40:
14:59:40:  <!-- Slot Control -->
14:59:40:  <idle v='true'/>
14:59:40:  <max-shutdown-wait v='60'/>
14:59:40:  <pause-on-battery v='false'/>
14:59:40:  <pause-on-start v='false'/>
14:59:40:  <paused v='false'/>
14:59:40:  <power v='light'/>
14:59:40:
14:59:40:  <!-- User Information -->
14:59:40:  <machine-id v='0'/>
14:59:40:  <passkey v=''/>
14:59:40:  <team v='0'/>
14:59:40:  <user v='Anonymous'/>
14:59:40:
14:59:40:  <!-- Web Server -->
14:59:40:  <web-allow v='127.0.0.1'/>
14:59:40:  <web-deny v='0/0'/>
14:59:40:  <web-enable v='true'/>
14:59:40:
14:59:40:  <!-- Web Server Sessions -->
14:59:40:  <session-cookie v='sid'/>
14:59:40:  <session-lifetime v='86400'/>
14:59:40:  <session-timeout v='3600'/>
14:59:40:
14:59:40:  <!-- Work Unit Control -->
14:59:40:  <dump-after-deadline v='true'/>
14:59:40:  <max-queue v='16'/>
14:59:40:  <max-units v='0'/>
14:59:40:  <next-unit-percentage v='99'/>
14:59:40:  <stall-detection-enabled v='false'/>
14:59:40:  <stall-percent v='5'/>
14:59:40:  <stall-timeout v='1800'/>
14:59:40:
14:59:40:  <!-- Folding Slots -->
14:59:40:  <slot id='0' type='CPU'>
14:59:40:    <cpus v='4'/>
14:59:40:  </slot>
14:59:40:</config>
14:59:40:Trying to access database...
14:59:40:Successfully acquired database lock
14:59:40:Enabled folding slot 00: PAUSED cpu:4 (waiting for idle)
14:59:40:Started thread 5 on PID 219961
14:59:40:Started thread 6 on PID 219961
14:59:40:Started thread 8 on PID 219961
14:59:40:Started thread 7 on PID 219961
14:59:40:Started thread 9 on PID 219961
14:59:40:Started thread 10 on PID 219961
15:01:42:WU00:FS00:Starting
15:01:42:WU00:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/home/m/.FAHClient startup folder/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7" -dir 00 -suffix 01 -version 705 -lifeline 219961 -checkpoint 30 -np 4
15:01:42:WU00:FS00:Started FahCore on PID 220226
15:01:42:Started thread 11 on PID 219961
15:01:42:WU00:FS00:Core PID:220230
15:01:42:WU00:FS00:FahCore 0xa7 started
15:01:42:WU00:FS00:0xa7:*********************** Log Started 2020-03-31T15:01:42Z ***********************
15:01:42:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
15:01:42:WU00:FS00:0xa7:       Type: 0xa7
15:01:42:WU00:FS00:0xa7:       Core: Gromacs
15:01:42:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 220226 -checkpoint 30 -np
15:01:42:WU00:FS00:0xa7:             4
15:01:42:WU00:FS00:0xa7:************************************ CBang *************************************
15:01:42:WU00:FS00:0xa7:       Date: Nov 5 2019
15:01:42:WU00:FS00:0xa7:       Time: 06:06:57
15:01:42:WU00:FS00:0xa7:   Revision: 46c96f1aa8419571d83f3e63f9c99a0d602f6da9
15:01:42:WU00:FS00:0xa7:     Branch: master
15:01:42:WU00:FS00:0xa7:   Compiler: GNU 8.3.0
15:01:42:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie -fPIC
15:01:42:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:01:42:WU00:FS00:0xa7:       Bits: 64
15:01:42:WU00:FS00:0xa7:       Mode: Release
15:01:42:WU00:FS00:0xa7:************************************ System ************************************
15:01:42:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
15:01:42:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 142 Stepping 10
15:01:42:WU00:FS00:0xa7:       CPUs: 4
15:01:42:WU00:FS00:0xa7:     Memory: 31.12GiB
15:01:42:WU00:FS00:0xa7:Free Memory: 8.53GiB
15:01:42:WU00:FS00:0xa7:    Threads: POSIX_THREADS
15:01:42:WU00:FS00:0xa7: OS Version: 5.5
15:01:42:WU00:FS00:0xa7:Has Battery: false
15:01:42:WU00:FS00:0xa7: On Battery: false
15:01:42:WU00:FS00:0xa7: UTC Offset: 0
15:01:42:WU00:FS00:0xa7:        PID: 220230
15:01:42:WU00:FS00:0xa7:        CWD: /home/m/.FAHClient startup folder/work
15:01:42:WU00:FS00:0xa7:******************************** Build - libFAH ********************************
15:01:42:WU00:FS00:0xa7:    Version: 0.0.18
15:01:42:WU00:FS00:0xa7:     Author: Joseph Coffland <[email protected]>
15:01:42:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org
15:01:42:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/
15:01:42:WU00:FS00:0xa7:       Date: Nov 5 2019
15:01:42:WU00:FS00:0xa7:       Time: 06:13:26
15:01:42:WU00:FS00:0xa7:   Revision: 490c9aa2957b725af319379424d5c5cb36efb656
15:01:42:WU00:FS00:0xa7:     Branch: master
15:01:42:WU00:FS00:0xa7:   Compiler: GNU 8.3.0
15:01:42:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie
15:01:42:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:01:42:WU00:FS00:0xa7:       Bits: 64
15:01:42:WU00:FS00:0xa7:       Mode: Release
15:01:42:WU00:FS00:0xa7:************************************ Build *************************************
15:01:42:WU00:FS00:0xa7:       SIMD: avx_256
15:01:42:WU00:FS00:0xa7:********************************************************************************
15:01:42:WU00:FS00:0xa7:Project: 13851 (Run 0, Clone 39680, Gen 11)
15:01:42:WU00:FS00:0xa7:Unit: 0x00000010287234c95e7879ba5413fe01
15:01:42:WU00:FS00:0xa7:Digital signatures verified
15:01:42:WU00:FS00:0xa7:Calling: mdrun -s frame11.tpr -o frame11.trr -x frame11.xtc -e frame11.edr -cpi state.cpt -cpt 30 -nt 4
15:01:42:WU00:FS00:0xa7:Steps: first=5500000 total=500000
15:01:44:WU00:FS00:0xa7:Completed 492552 out of 500000 steps (98%)
15:03:19:WU00:FS00:0xa7:Completed 495000 out of 500000 steps (99%)
15:03:20:WU01:FS00:Connecting to 65.254.110.245:8080
15:03:20:WU01:FS00:Assigned to work server 40.114.52.201
15:03:20:WU01:FS00:Requesting new work unit for slot 00: RUNNING cpu:4 from 40.114.52.201
15:03:20:WU01:FS00:Connecting to 40.114.52.201:8080
15:03:28:FS00:Shutting core down
15:03:28:WU00:FS00:0xa7:Caught signal SIGINT(2) on PID 220230
15:03:28:WU00:FS00:0xa7:Exiting, please wait. . .
15:03:29:WU00:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
15:03:30:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
15:03:45:WU01:FS00:Downloading 2.14MiB
15:03:49:WU01:FS00:Download complete
15:03:49:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:13850 run:0 clone:23970 gen:5 core:0xa7 unit:0x0000000b287234c95e788b551106bb3e
15:05:51:WU00:FS00:Starting
15:05:51:WU00:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/home/m/.FAHClient startup folder/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7" -dir 00 -suffix 01 -version 705 -lifeline 219961 -checkpoint 30 -np 4
15:05:51:WU00:FS00:Started FahCore on PID 220799
15:05:51:Started thread 12 on PID 219961
15:05:51:WU00:FS00:Core PID:220803
15:05:51:WU00:FS00:FahCore 0xa7 started
15:05:51:WU00:FS00:0xa7:*********************** Log Started 2020-03-31T15:05:51Z ***********************
15:05:51:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
15:05:51:WU00:FS00:0xa7:       Type: 0xa7
15:05:51:WU00:FS00:0xa7:       Core: Gromacs
15:05:51:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 220799 -checkpoint 30 -np
15:05:51:WU00:FS00:0xa7:             4
15:05:51:WU00:FS00:0xa7:************************************ CBang *************************************
15:05:51:WU00:FS00:0xa7:       Date: Nov 5 2019
15:05:51:WU00:FS00:0xa7:       Time: 06:06:57
15:05:51:WU00:FS00:0xa7:   Revision: 46c96f1aa8419571d83f3e63f9c99a0d602f6da9
15:05:51:WU00:FS00:0xa7:     Branch: master
15:05:51:WU00:FS00:0xa7:   Compiler: GNU 8.3.0
15:05:51:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie -fPIC
15:05:51:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:05:51:WU00:FS00:0xa7:       Bits: 64
15:05:51:WU00:FS00:0xa7:       Mode: Release
15:05:51:WU00:FS00:0xa7:************************************ System ************************************
15:05:51:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
15:05:51:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 142 Stepping 10
15:05:51:WU00:FS00:0xa7:       CPUs: 4
15:05:51:WU00:FS00:0xa7:     Memory: 31.12GiB
15:05:51:WU00:FS00:0xa7:Free Memory: 8.51GiB
15:05:51:WU00:FS00:0xa7:    Threads: POSIX_THREADS
15:05:51:WU00:FS00:0xa7: OS Version: 5.5
15:05:51:WU00:FS00:0xa7:Has Battery: false
15:05:51:WU00:FS00:0xa7: On Battery: false
15:05:51:WU00:FS00:0xa7: UTC Offset: 0
15:05:51:WU00:FS00:0xa7:        PID: 220803
15:05:51:WU00:FS00:0xa7:        CWD: /home/m/.FAHClient startup folder/work
15:05:51:WU00:FS00:0xa7:******************************** Build - libFAH ********************************
15:05:51:WU00:FS00:0xa7:    Version: 0.0.18
15:05:51:WU00:FS00:0xa7:     Author: Joseph Coffland <[email protected]>
15:05:51:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org
15:05:51:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/
15:05:51:WU00:FS00:0xa7:       Date: Nov 5 2019
15:05:51:WU00:FS00:0xa7:       Time: 06:13:26
15:05:51:WU00:FS00:0xa7:   Revision: 490c9aa2957b725af319379424d5c5cb36efb656
15:05:51:WU00:FS00:0xa7:     Branch: master
15:05:51:WU00:FS00:0xa7:   Compiler: GNU 8.3.0
15:05:51:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie
15:05:51:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:05:51:WU00:FS00:0xa7:       Bits: 64
15:05:51:WU00:FS00:0xa7:       Mode: Release
15:05:51:WU00:FS00:0xa7:************************************ Build *************************************
15:05:51:WU00:FS00:0xa7:       SIMD: avx_256
15:05:51:WU00:FS00:0xa7:********************************************************************************
15:05:51:WU00:FS00:0xa7:Project: 13851 (Run 0, Clone 39680, Gen 11)
15:05:51:WU00:FS00:0xa7:Unit: 0x00000010287234c95e7879ba5413fe01
15:05:51:WU00:FS00:0xa7:Digital signatures verified
15:05:51:WU00:FS00:0xa7:Calling: mdrun -s frame11.tpr -o frame11.trr -x frame11.xtc -e frame11.edr -cpi state.cpt -cpt 30 -nt 4
15:05:51:WU00:FS00:0xa7:Steps: first=5500000 total=500000
15:05:53:WU00:FS00:0xa7:Completed 495222 out of 500000 steps (99%)
15:09:04:WU00:FS00:0xa7:Completed 500000 out of 500000 steps (100%)
15:09:06:WU00:FS00:0xa7:Saving result file ../logfile_01.txt
15:09:06:WU00:FS00:0xa7:Saving result file frame11.edr
15:09:06:WU00:FS00:0xa7:Saving result file frame11.trr
15:09:06:WU00:FS00:0xa7:Saving result file frame11.xtc
15:09:06:WU00:FS00:0xa7:Saving result file md.log
15:09:06:WU00:FS00:0xa7:Saving result file science.log
15:09:06:WU00:FS00:0xa7:Folding@home Core Shutdown: FINISHED_UNIT
15:09:06:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
15:09:06:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:13851 run:0 clone:39680 gen:11 core:0xa7 unit:0x00000010287234c95e7879ba5413fe01
15:09:06:WU00:FS00:Uploading 2.51MiB to 40.114.52.201
15:09:06:WU00:FS00:Connecting to 40.114.52.201:8080
15:09:06:WU01:FS00:Starting
15:09:06:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/home/m/.FAHClient startup folder/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7" -dir 01 -suffix 01 -version 705 -lifeline 219961 -checkpoint 30 -np 4
15:09:06:WU01:FS00:Started FahCore on PID 221235
15:09:06:Started thread 13 on PID 219961
15:09:06:WU01:FS00:Core PID:221239
15:09:06:WU01:FS00:FahCore 0xa7 started
15:09:07:WU01:FS00:0xa7:*********************** Log Started 2020-03-31T15:09:06Z ***********************
15:09:07:WU01:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
15:09:07:WU01:FS00:0xa7:       Type: 0xa7
15:09:07:WU01:FS00:0xa7:       Core: Gromacs
15:09:07:WU01:FS00:0xa7:       Args: -dir 01 -suffix 01 -version 705 -lifeline 221235 -checkpoint 30 -np
15:09:07:WU01:FS00:0xa7:             4
15:09:07:WU01:FS00:0xa7:************************************ CBang *************************************
15:09:07:WU01:FS00:0xa7:       Date: Nov 5 2019
15:09:07:WU01:FS00:0xa7:       Time: 06:06:57
15:09:07:WU01:FS00:0xa7:   Revision: 46c96f1aa8419571d83f3e63f9c99a0d602f6da9
15:09:07:WU01:FS00:0xa7:     Branch: master
15:09:07:WU01:FS00:0xa7:   Compiler: GNU 8.3.0
15:09:07:WU01:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie -fPIC
15:09:07:WU01:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:09:07:WU01:FS00:0xa7:       Bits: 64
15:09:07:WU01:FS00:0xa7:       Mode: Release
15:09:07:WU01:FS00:0xa7:************************************ System ************************************
15:09:07:WU01:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
15:09:07:WU01:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 142 Stepping 10
15:09:07:WU01:FS00:0xa7:       CPUs: 4
15:09:07:WU01:FS00:0xa7:     Memory: 31.12GiB
15:09:07:WU01:FS00:0xa7:Free Memory: 8.52GiB
15:09:07:WU01:FS00:0xa7:    Threads: POSIX_THREADS
15:09:07:WU01:FS00:0xa7: OS Version: 5.5
15:09:07:WU01:FS00:0xa7:Has Battery: false
15:09:07:WU01:FS00:0xa7: On Battery: false
15:09:07:WU01:FS00:0xa7: UTC Offset: 0
15:09:07:WU01:FS00:0xa7:        PID: 221239
15:09:07:WU01:FS00:0xa7:        CWD: /home/m/.FAHClient startup folder/work
15:09:07:WU01:FS00:0xa7:******************************** Build - libFAH ********************************
15:09:07:WU01:FS00:0xa7:    Version: 0.0.18
15:09:07:WU01:FS00:0xa7:     Author: Joseph Coffland <[email protected]>
15:09:07:WU01:FS00:0xa7:  Copyright: 2019 foldingathome.org
15:09:07:WU01:FS00:0xa7:   Homepage: https://foldingathome.org/
15:09:07:WU01:FS00:0xa7:       Date: Nov 5 2019
15:09:07:WU01:FS00:0xa7:       Time: 06:13:26
15:09:07:WU01:FS00:0xa7:   Revision: 490c9aa2957b725af319379424d5c5cb36efb656
15:09:07:WU01:FS00:0xa7:     Branch: master
15:09:07:WU01:FS00:0xa7:   Compiler: GNU 8.3.0
15:09:07:WU01:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie
15:09:07:WU01:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:09:07:WU01:FS00:0xa7:       Bits: 64
15:09:07:WU01:FS00:0xa7:       Mode: Release
15:09:07:WU01:FS00:0xa7:************************************ Build *************************************
15:09:07:WU01:FS00:0xa7:       SIMD: avx_256
15:09:07:WU01:FS00:0xa7:********************************************************************************
15:09:07:WU01:FS00:0xa7:Project: 13850 (Run 0, Clone 23970, Gen 5)
15:09:07:WU01:FS00:0xa7:Unit: 0x0000000b287234c95e788b551106bb3e
15:09:07:WU01:FS00:0xa7:Reading tar file core.xml
15:09:07:WU01:FS00:0xa7:Reading tar file frame5.tpr
15:09:07:WU01:FS00:0xa7:Digital signatures verified
15:09:07:WU01:FS00:0xa7:Calling: mdrun -s frame5.tpr -o frame5.trr -x frame5.xtc -e frame5.edr -cpt 30 -nt 4
15:09:07:WU01:FS00:0xa7:Steps: first=2500000 total=500000
15:09:08:WU01:FS00:0xa7:Completed 1 out of 500000 steps (0%)
15:09:14:FS00:Shutting core down
15:09:14:WU01:FS00:0xa7:Caught signal SIGINT(2) on PID 221239
15:09:14:WU01:FS00:0xa7:Exiting, please wait. . .
15:09:15:WU01:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
15:09:15:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
15:11:16:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
15:11:16:WU00:FS00:Connecting to 40.114.52.201:80
15:11:23:WU00:FS00:Upload 2.49%
15:11:24:WU01:FS00:Starting
15:11:24:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/home/m/.FAHClient startup folder/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7" -dir 01 -suffix 01 -version 705 -lifeline 219961 -checkpoint 30 -np 4
15:11:24:WU01:FS00:Started FahCore on PID 221550
15:11:24:Started thread 14 on PID 219961
15:11:24:WU01:FS00:Core PID:221554
15:11:24:WU01:FS00:FahCore 0xa7 started
15:11:24:WU01:FS00:0xa7:*********************** Log Started 2020-03-31T15:11:24Z ***********************
15:11:24:WU01:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
15:11:24:WU01:FS00:0xa7:       Type: 0xa7
15:11:24:WU01:FS00:0xa7:       Core: Gromacs
15:11:24:WU01:FS00:0xa7:       Args: -dir 01 -suffix 01 -version 705 -lifeline 221550 -checkpoint 30 -np
15:11:24:WU01:FS00:0xa7:             4
15:11:24:WU01:FS00:0xa7:************************************ CBang *************************************
15:11:24:WU01:FS00:0xa7:       Date: Nov 5 2019
15:11:24:WU01:FS00:0xa7:       Time: 06:06:57
15:11:24:WU01:FS00:0xa7:   Revision: 46c96f1aa8419571d83f3e63f9c99a0d602f6da9
15:11:24:WU01:FS00:0xa7:     Branch: master
15:11:24:WU01:FS00:0xa7:   Compiler: GNU 8.3.0
15:11:24:WU01:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie -fPIC
15:11:24:WU01:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:11:24:WU01:FS00:0xa7:       Bits: 64
15:11:24:WU01:FS00:0xa7:       Mode: Release
15:11:24:WU01:FS00:0xa7:************************************ System ************************************
15:11:24:WU01:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
15:11:24:WU01:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 142 Stepping 10
15:11:24:WU01:FS00:0xa7:       CPUs: 4
15:11:24:WU01:FS00:0xa7:     Memory: 31.12GiB
15:11:24:WU01:FS00:0xa7:Free Memory: 8.50GiB
15:11:24:WU01:FS00:0xa7:    Threads: POSIX_THREADS
15:11:24:WU01:FS00:0xa7: OS Version: 5.5
15:11:24:WU01:FS00:0xa7:Has Battery: false
15:11:24:WU01:FS00:0xa7: On Battery: false
15:11:24:WU01:FS00:0xa7: UTC Offset: 0
15:11:24:WU01:FS00:0xa7:        PID: 221554
15:11:24:WU01:FS00:0xa7:        CWD: /home/m/.FAHClient startup folder/work
15:11:24:WU01:FS00:0xa7:******************************** Build - libFAH ********************************
15:11:24:WU01:FS00:0xa7:    Version: 0.0.18
15:11:24:WU01:FS00:0xa7:     Author: Joseph Coffland <[email protected]>
15:11:24:WU01:FS00:0xa7:  Copyright: 2019 foldingathome.org
15:11:24:WU01:FS00:0xa7:   Homepage: https://foldingathome.org/
15:11:24:WU01:FS00:0xa7:       Date: Nov 5 2019
15:11:24:WU01:FS00:0xa7:       Time: 06:13:26
15:11:24:WU01:FS00:0xa7:   Revision: 490c9aa2957b725af319379424d5c5cb36efb656
15:11:24:WU01:FS00:0xa7:     Branch: master
15:11:24:WU01:FS00:0xa7:   Compiler: GNU 8.3.0
15:11:24:WU01:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie
15:11:24:WU01:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:11:24:WU01:FS00:0xa7:       Bits: 64
15:11:24:WU01:FS00:0xa7:       Mode: Release
15:11:24:WU01:FS00:0xa7:************************************ Build *************************************
15:11:24:WU01:FS00:0xa7:       SIMD: avx_256
15:11:24:WU01:FS00:0xa7:********************************************************************************
15:11:24:WU01:FS00:0xa7:Project: 13850 (Run 0, Clone 23970, Gen 5)
15:11:24:WU01:FS00:0xa7:Unit: 0x0000000b287234c95e788b551106bb3e
15:11:24:WU01:FS00:0xa7:Digital signatures verified
15:11:24:WU01:FS00:0xa7:Calling: mdrun -s frame5.tpr -o frame5.trr -x frame5.xtc -e frame5.edr -cpi state.cpt -cpt 30 -nt 4
15:11:24:WU01:FS00:0xa7:Steps: first=2500000 total=500000
15:11:26:WU01:FS00:0xa7:Completed 142 out of 500000 steps (0%)
15:11:27:FS00:Shutting core down
15:11:27:WU01:FS00:0xa7:Caught signal SIGINT(2) on PID 221554
15:11:27:WU01:FS00:0xa7:Exiting, please wait. . .
15:11:28:WU01:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
15:11:28:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
15:11:41:WU00:FS00:Upload 7.46%
15:11:47:WU00:FS00:Upload 22.38%
15:12:04:WU00:FS00:Upload 32.33%
15:12:10:WU00:FS00:Upload 34.82%
15:12:18:WU00:FS00:Upload 42.28%
15:12:26:WU00:FS00:Upload 59.69%
15:12:34:WU00:FS00:Upload 72.12%
15:12:46:WU00:FS00:Upload 84.55%
15:12:53:WU00:FS00:Upload 92.01%
15:13:11:WU00:FS00:Upload complete
15:13:11:WU00:FS00:Server responded WORK_ACK (400)
15:13:11:WU00:FS00:Final credit estimate, 4653.00 points
15:13:11:WU00:FS00:Cleaning up
15:13:38:WU01:FS00:Starting
15:13:38:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/home/m/.FAHClient startup folder/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7" -dir 01 -suffix 01 -version 705 -lifeline 219961 -checkpoint 30 -np 4
15:13:38:WU01:FS00:Started FahCore on PID 221837
15:13:38:Started thread 15 on PID 219961
15:13:38:WU01:FS00:Core PID:221841
15:13:38:WU01:FS00:FahCore 0xa7 started
15:13:38:WU01:FS00:0xa7:*********************** Log Started 2020-03-31T15:13:38Z ***********************
15:13:38:WU01:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
15:13:38:WU01:FS00:0xa7:       Type: 0xa7
15:13:38:WU01:FS00:0xa7:       Core: Gromacs
15:13:38:WU01:FS00:0xa7:       Args: -dir 01 -suffix 01 -version 705 -lifeline 221837 -checkpoint 30 -np
15:13:38:WU01:FS00:0xa7:             4
15:13:38:WU01:FS00:0xa7:************************************ CBang *************************************
15:13:38:WU01:FS00:0xa7:       Date: Nov 5 2019
15:13:38:WU01:FS00:0xa7:       Time: 06:06:57
15:13:38:WU01:FS00:0xa7:   Revision: 46c96f1aa8419571d83f3e63f9c99a0d602f6da9
15:13:38:WU01:FS00:0xa7:     Branch: master
15:13:38:WU01:FS00:0xa7:   Compiler: GNU 8.3.0
15:13:38:WU01:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie -fPIC
15:13:38:WU01:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:13:38:WU01:FS00:0xa7:       Bits: 64
15:13:38:WU01:FS00:0xa7:       Mode: Release
15:13:38:WU01:FS00:0xa7:************************************ System ************************************
15:13:38:WU01:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
15:13:38:WU01:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 142 Stepping 10
15:13:38:WU01:FS00:0xa7:       CPUs: 4
15:13:38:WU01:FS00:0xa7:     Memory: 31.12GiB
15:13:38:WU01:FS00:0xa7:Free Memory: 8.53GiB
15:13:38:WU01:FS00:0xa7:    Threads: POSIX_THREADS
15:13:38:WU01:FS00:0xa7: OS Version: 5.5
15:13:38:WU01:FS00:0xa7:Has Battery: false
15:13:38:WU01:FS00:0xa7: On Battery: false
15:13:38:WU01:FS00:0xa7: UTC Offset: 0
15:13:38:WU01:FS00:0xa7:        PID: 221841
15:13:38:WU01:FS00:0xa7:        CWD: /home/m/.FAHClient startup folder/work
15:13:38:WU01:FS00:0xa7:******************************** Build - libFAH ********************************
15:13:38:WU01:FS00:0xa7:    Version: 0.0.18
15:13:38:WU01:FS00:0xa7:     Author: Joseph Coffland <[email protected]>
15:13:38:WU01:FS00:0xa7:  Copyright: 2019 foldingathome.org
15:13:38:WU01:FS00:0xa7:   Homepage: https://foldingathome.org/
15:13:38:WU01:FS00:0xa7:       Date: Nov 5 2019
15:13:38:WU01:FS00:0xa7:       Time: 06:13:26
15:13:38:WU01:FS00:0xa7:   Revision: 490c9aa2957b725af319379424d5c5cb36efb656
15:13:38:WU01:FS00:0xa7:     Branch: master
15:13:38:WU01:FS00:0xa7:   Compiler: GNU 8.3.0
15:13:38:WU01:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie
15:13:38:WU01:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
15:13:38:WU01:FS00:0xa7:       Bits: 64
15:13:38:WU01:FS00:0xa7:       Mode: Release
15:13:38:WU01:FS00:0xa7:************************************ Build *************************************
15:13:38:WU01:FS00:0xa7:       SIMD: avx_256
15:13:38:WU01:FS00:0xa7:********************************************************************************
15:13:38:WU01:FS00:0xa7:Project: 13850 (Run 0, Clone 23970, Gen 5)
15:13:38:WU01:FS00:0xa7:Unit: 0x0000000b287234c95e788b551106bb3e
15:13:38:WU01:FS00:0xa7:Digital signatures verified
15:13:38:WU01:FS00:0xa7:Calling: mdrun -s frame5.tpr -o frame5.trr -x frame5.xtc -e frame5.edr -cpi state.cpt -cpt 30 -nt 4
15:13:38:WU01:FS00:0xa7:Steps: first=2500000 total=500000
15:13:40:WU01:FS00:0xa7:Completed 182 out of 500000 steps (0%)
15:16:54:WU01:FS00:0xa7:Completed 5000 out of 500000 steps (1%)
15:20:19:WU01:FS00:0xa7:Completed 10000 out of 500000 steps (2%)
^C15:22:32:Caught signal SIGINT(2) on PID 219961
15:22:32:Exiting, please wait. . .
15:22:33:FS00:Shutting core down
15:22:34:WU01:FS00:0xa7:Caught signal SIGINT(2) on PID 221841
15:22:34:WU01:FS00:0xa7:Exiting, please wait. . .
15:22:35:WU01:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
15:22:35:Clean exit
$ 

Conclusion: FAHClient's idle mode dedicated for calculation process itself. Network activity of FAHClient does not affected by idle mode (which is great as I think: it is ability to get/send WU during all time so then the idle time comes, WU will be ready for calculation with greater probability comparing to situation then all operations of FAHClient would be postponed to idle state, leading to hours of idle state could be wasted in tries to get new WU and only then start calculations in remaining idle time).

So possible lack item (3) is not present in FAHClient.

PS: Found lack in item (3): see next msg.

[wezh]

Previously item (3) was checked while FAHClient was already running.
Now checked start of FAHClient and found lack in item (3):
if to start FAHClient in idle mode w/o any WU downloaded earlier, then FAHClient will wait idle time to start connection to get WU. So idle time dedicated to high-load calculation will be wasted in tries to connect to server to download new WU to compute.

Shortened log:

Code: Select all

$ FAHClient -v --idle --idle-seconds 150
02:28:50:INFO(1):Read GPUs.txt
...
02:28:50:Enabled folding slot 00: PAUSED cpu:3 (waiting for idle)
...
02:31:22:WU00:FS00:Connecting to 65.254.110.245:8080
02:31:22:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
02:31:22:WU00:FS00:Connecting to 18.218.241.186:80
02:31:23:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
02:31:23:ERROR:WU00:FS00:Exception: Could not get an assignment
...

Full log:

Code: Select all

$ FAHClient -v --idle --idle-seconds 150
02:28:50:INFO(1):Read GPUs.txt
02:28:50:Removing old file 'logs/log-20200331-043846.txt'
02:28:50:************************* Folding@home Client *************************
02:28:50:    Website: https://foldingathome.org/
02:28:50:  Copyright: (c) 2009-2018 foldingathome.org
02:28:50:Started thread 1 on PID 13314
02:28:50:     Author: Joseph Coffland <[email protected]>
02:28:50:       Args: -v --idle --idle-seconds 150
02:28:50:     Config: /home/m/.FAHClient startup folder/config.xml
02:28:50:******************************** Build ********************************
02:28:50:    Version: 7.5.1
02:28:50:       Date: May 11 2018
02:28:50:       Time: 19:59:04
02:28:50: Repository: Git
02:28:50:   Revision: 4705bf53c635f88b8fe85af7675557e15d491ff0
02:28:50:     Branch: master
02:28:50:   Compiler: GNU 6.3.0 20170516
02:28:50:    Options: -std=gnu++98 -O3 -funroll-loops
02:28:50:   Platform: linux2 4.14.0-3-amd64
02:28:50:       Bits: 64
02:28:50:       Mode: Release
02:28:50:******************************* System ********************************
02:28:50:        CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
02:28:50:     CPU ID: GenuineIntel Family 6 Model 142 Stepping 10
02:28:50:       CPUs: 4
02:28:50:     Memory: 31.12GiB
02:28:50:Free Memory: 23.05GiB
02:28:50:    Threads: POSIX_THREADS
02:28:50: OS Version: 5.5
02:28:50:Has Battery: false
02:28:50: On Battery: false
02:28:50: UTC Offset: 0
02:28:50:        PID: 13314
02:28:50:        CWD: /home/m/.FAHClient startup folder
02:28:50:         OS: Linux 5.5.13-1-MANJARO x86_64
02:28:50:    OS Arch: AMD64
02:28:50:       GPUs: 0
02:28:50:       CUDA: Not detected: Failed to open dynamic library 'libcuda.so':
02:28:50:             libcuda.so: cannot open shared object file: No such file or
02:28:50:             directory
02:28:50:     OpenCL: Not detected: Failed to open dynamic library 'libOpenCL.so':
02:28:50:             libOpenCL.so: cannot open shared object file: No such file or
02:28:50:             directory
02:28:50:***********************************************************************
02:28:50:<config>
02:28:50:  <!-- Client Control -->
02:28:50:  <client-threads v='6'/>
02:28:50:  <cycle-rate v='4'/>
02:28:50:  <cycles v='-1'/>
02:28:50:  <data-directory v='.'/>
02:28:50:  <disable-sleep-when-active v='true'/>
02:28:50:  <exec-directory v='/usr/bin'/>
02:28:50:  <exit-when-done v='false'/>
02:28:50:  <fold-anon v='false'/>
02:28:50:  <idle-seconds v='150'/>
02:28:50:  <open-web-control v='false'/>
02:28:50:
02:28:50:  <!-- Configuration -->
02:28:50:  <config-rotate v='true'/>
02:28:50:  <config-rotate-dir v='configs'/>
02:28:50:  <config-rotate-max v='16'/>
02:28:50:
02:28:50:  <!-- Debugging -->
02:28:50:  <assignment-servers>
02:28:50:    assign1.foldingathome.org:8080 assign2.foldingathome.org:80
02:28:50:  </assignment-servers>
02:28:50:  <auth-as v='true'/>
02:28:50:  <capture-directory v='capture'/>
02:28:50:  <capture-on-error v='false'/>
02:28:50:  <capture-packets v='false'/>
02:28:50:  <capture-requests v='false'/>
02:28:50:  <capture-responses v='false'/>
02:28:50:  <capture-sockets v='false'/>
02:28:50:  <core-exec v='FahCore_$type'/>
02:28:50:  <core-wrapper-exec v='FAHCoreWrapper'/>
02:28:50:  <debug-sockets v='false'/>
02:28:50:  <exception-locations v='true'/>
02:28:50:  <stack-traces v='false'/>
02:28:50:
02:28:50:  <!-- Error Handling -->
02:28:50:  <max-slot-errors v='10'/>
02:28:50:  <max-unit-errors v='5'/>
02:28:50:
02:28:50:  <!-- Folding Core -->
02:28:50:  <checkpoint v='30'/>
02:28:50:  <core-dir v='cores'/>
02:28:50:  <core-priority v='idle'/>
02:28:50:  <cpu-affinity v='false'/>
02:28:50:  <cpu-usage v='100'/>
02:28:50:  <gpu-usage v='100'/>
02:28:50:  <no-assembly v='false'/>
02:28:50:
02:28:50:  <!-- Folding Slot Configuration -->
02:28:50:  <cause v='ANY'/>
02:28:50:  <client-subtype v='LINUX'/>
02:28:50:  <client-type v='normal'/>
02:28:50:  <cpu-species v='X86_PENTIUM_II'/>
02:28:50:  <cpu-type v='AMD64'/>
02:28:50:  <cpus v='-1'/>
02:28:50:  <disable-viz v='false'/>
02:28:50:  <gpu v='true'/>
02:28:50:  <max-packet-size v='normal'/>
02:28:50:  <os-species v='UNKNOWN'/>
02:28:50:  <os-type v='LINUX'/>
02:28:50:  <project-key v='0'/>
02:28:50:  <smp v='true'/>
02:28:50:
02:28:50:  <!-- GUI -->
02:28:50:  <gui-enabled v='true'/>
02:28:50:
02:28:50:  <!-- HTTP Server -->
02:28:50:  <allow v='127.0.0.1'/>
02:28:50:  <connection-timeout v='60'/>
02:28:50:  <deny v='0/0'/>
02:28:50:  <http-addresses v='0:7396'/>
02:28:50:  <https-addresses v=''/>
02:28:50:  <max-connect-time v='900'/>
02:28:50:  <max-connections v='800'/>
02:28:50:  <max-request-length v='52428800'/>
02:28:50:  <min-connect-time v='300'/>
02:28:50:
02:28:50:  <!-- Logging -->
02:28:50:  <log v='log.txt'/>
02:28:50:  <log-color v='true'/>
02:28:50:  <log-crlf v='false'/>
02:28:50:  <log-date v='false'/>
02:28:50:  <log-date-periodically v='21600'/>
02:28:50:  <log-domain v='false'/>
02:28:50:  <log-header v='true'/>
02:28:50:  <log-level v='true'/>
02:28:50:  <log-no-info-header v='true'/>
02:28:50:  <log-redirect v='false'/>
02:28:50:  <log-rotate v='true'/>
02:28:50:  <log-rotate-dir v='logs'/>
02:28:50:  <log-rotate-max v='16'/>
02:28:50:  <log-short-level v='false'/>
02:28:50:  <log-simple-domains v='true'/>
02:28:50:  <log-thread-id v='false'/>
02:28:50:  <log-thread-prefix v='true'/>
02:28:50:  <log-time v='true'/>
02:28:50:  <log-to-screen v='true'/>
02:28:50:  <log-truncate v='false'/>
02:28:50:  <verbosity v='5'/>
02:28:50:
02:28:50:  <!-- Network -->
02:28:50:  <proxy v=':8080'/>
02:28:50:  <proxy-enable v='false'/>
02:28:50:  <proxy-pass v=''/>
02:28:50:  <proxy-user v=''/>
02:28:50:
02:28:50:  <!-- Process Control -->
02:28:50:  <child v='false'/>
02:28:50:  <daemon v='false'/>
02:28:50:  <fork v='false'/>
02:28:50:  <pid v='false'/>
02:28:50:  <pid-file v='Folding@home Client.pid'/>
02:28:50:  <respawn v='false'/>
02:28:50:  <service v='false'/>
02:28:50:
02:28:50:  <!-- Remote Command Server -->
02:28:50:  <command-address v='0.0.0.0'/>
02:28:50:  <command-allow-no-pass v='127.0.0.1'/>
02:28:50:  <command-deny-no-pass v='0/0'/>
02:28:50:  <command-enable v='true'/>
02:28:50:  <command-port v='36330'/>
02:28:50:
02:28:50:  <!-- Slot Control -->
02:28:50:  <idle v='true'/>
02:28:50:  <max-shutdown-wait v='60'/>
02:28:50:  <pause-on-battery v='false'/>
02:28:50:  <pause-on-start v='false'/>
02:28:50:  <paused v='false'/>
02:28:50:  <power v='light'/>
02:28:50:
02:28:50:  <!-- User Information -->
02:28:50:  <machine-id v='0'/>
02:28:50:  <passkey v=''/>
02:28:50:  <team v='0'/>
02:28:50:  <user v='Anonymous'/>
02:28:50:
02:28:50:  <!-- Web Server -->
02:28:50:  <web-allow v='127.0.0.1'/>
02:28:50:  <web-deny v='0/0'/>
02:28:50:  <web-enable v='true'/>
02:28:50:
02:28:50:  <!-- Web Server Sessions -->
02:28:50:  <session-cookie v='sid'/>
02:28:50:  <session-lifetime v='86400'/>
02:28:50:  <session-timeout v='3600'/>
02:28:50:
02:28:50:  <!-- Work Unit Control -->
02:28:50:  <dump-after-deadline v='true'/>
02:28:50:  <max-queue v='16'/>
02:28:50:  <max-units v='0'/>
02:28:50:  <next-unit-percentage v='99'/>
02:28:50:  <stall-detection-enabled v='false'/>
02:28:50:  <stall-percent v='5'/>
02:28:50:  <stall-timeout v='1800'/>
02:28:50:
02:28:50:  <!-- Folding Slots -->
02:28:50:  <slot id='0' type='CPU'>
02:28:50:    <cpus v='3'/>
02:28:50:  </slot>
02:28:50:</config>
02:28:50:Trying to access database...
02:28:50:Successfully acquired database lock
02:28:50:Enabled folding slot 00: PAUSED cpu:3 (waiting for idle)
02:28:50:Started thread 5 on PID 13314
02:28:50:Started thread 6 on PID 13314
02:28:50:Started thread 7 on PID 13314
02:28:50:Started thread 8 on PID 13314
02:28:50:Started thread 9 on PID 13314
02:28:50:Started thread 10 on PID 13314
02:31:22:WU00:FS00:Connecting to 65.254.110.245:8080
02:31:22:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
02:31:22:WU00:FS00:Connecting to 18.218.241.186:80
02:31:23:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
02:31:23:ERROR:WU00:FS00:Exception: Could not get an assignment
02:31:23:WU00:FS00:Connecting to 65.254.110.245:8080
02:31:24:WARNING:WU00:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
02:31:24:WU00:FS00:Connecting to 18.218.241.186:80
02:31:24:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
02:31:24:ERROR:WU00:FS00:Exception: Could not get an assignment
^C02:31:37:Caught signal SIGINT(2) on PID 13314
02:31:37:Exiting, please wait. . .
02:31:38:Clean exit
$ 

[ipkh]

You can hardly call idle time wasted. By definition the computer isn't doing anything at that time.
Best not to worry about it given the huge influx of folders and limited server capacity.

[bruce]

There's an old expression "There are no atheists in foxholes" which in a rather direct way is suggests that people on the battlefield think and feel differently than when they're at home, pondering a beautiful flower. I think you'll have to understand that current COVAID crisis is much like a battlefield environment and the staff that might happily accept some or all of your suggestions at some other moment in time aren't already stretched to their physical and emotional limits expanding FAH's capacity to keep up with the rate at which new clients are being brought online.

Scientific research is proceeding within the constraints of the current server bandwidth limitations. Humans are extending those limitations on a regular basis. Let's concentrate on getting the results published so that other scientists can add to what we're learning. Read https://foldingathome.org/news/ for more information.

This is a support forum. The only thing we can do right now is put your suggestions on a list to be looked at again after the crisis is over.

[wezh]

Hi, ipkh, bruce!

I read all answers earlier and yours also. Moreover: I understood them before yours kind of additional clarification. I point lacks and understood that fixes postponed to future after COVID19.
If you ask what is in my last posts for, it is very easy to understand: davidcoton suggest to make an observation of item (3) by myself. I made it: I got experiment data, but I did not collect that data individually into "secret box": I want to share results with others: community users and just readers searching the info to save their time and efforts to get answers and I did that in that posts.

In a few days will try to publish separate thread of experimental data on using FAHClient folding process in point of view of comparison processing core number vs performance vs temperature vs power consumption, but this is for CPU, moreover: mobile CPU (i5-8250U inside of fanless mini pc). Also I will suggest how to try to fold on CPU of fanless PCs (to prevent overheating). Data already collected. Most weird (uninteresting) part is going: preparing description to issue.
Finally done in another forum section.

Thank you for your posts and taking part in folding!

[wezh]

I realized that for last several days (about a week, may be two) I do not see any problems with FAH infrastructure:

-) new WU successfully downloaded before current WU is done;
-) uploading result of folding is excellent (but previously was not bad also).

So, now infrastructure itself works well for me (without any idle). And client version also changed to 7.6.9.

Thank you, all!

[Neil-B]

Glad it is running better for you … It is really hard for new folders joining in the middle of a massive infrastructure expansion and server overload scenario - problems seem to be everywhere and take ages to resolve … In reality, even though is isn't a great experience, it actually was a massively positive time (errors and all) with a huge increase in processing power and science throughput achieved (even with all the issues) and with surprisingly little pain.

Oh yes, there was pain, and frustration and inefficiencies - and there still are, with ongoing work to continue to resolve overload and server issues - but it is getting better … New clients (with a few associated niggles) have rolled out, a new gpu core (again with a few niggles) - but there has been more expansion, development and progress in the last month or so than for years.

Thank you for sticking with it and helping identify issues .. You may find there are still a few around that will impact you but the team will try to respond and address these as they happen.