Client failing to connect to assigned work server

Moderators: Site Moderators, FAHC Science Team

_r2w_ben
Posts: 285
Joined: Wed Apr 23, 2008 3:11 pm

Re: Client failing to connect to assigned work server

Post by _r2w_ben »

Joe_H wrote:18.218.241.186 is one of the Assignment Servers located in the cloud, hosted on AWS. At times it has shown up in the Server Status page, not sure why it is not at the moment.
assign2.foldingathome.org resolves to 18.218.241.186. I'm not sure if 172.31.11.240 listed on Server Status is a label or an alternate IP address for assign2.foldingathome.org.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Client failing to connect to assigned work server

Post by bruce »

Do you connect thru a proxy (as is common in a University or a Corporate internet connection0 or directly from home?
ispyisail
Posts: 5
Joined: Mon Mar 16, 2020 11:30 pm

Re: Client failing to connect to assigned work server

Post by ispyisail »

It might get worse when LinusTechTips turns up

can't post the link
Utopia_Blue
Posts: 1
Joined: Sat Mar 14, 2020 7:11 pm

Re: Client failing to connect to assigned work server

Post by Utopia_Blue »

I can't catch a WU either. Four Gpus standing by!
markfw
Posts: 143
Joined: Mon Feb 04, 2008 3:32 pm

Re: Client failing to connect to assigned work server

Post by markfw »

BTW Bruce, my offer of server help may be understated. I have a dual 7601 EPYC, a 7742 EPYC, and a 7551 EPYC. They all could help you if things worked out.
ClawzSkunk
Posts: 6
Joined: Tue Mar 17, 2020 11:46 am

Re: Client failing to connect to assigned work server

Post by ClawzSkunk »

I'm getting the same issue with being unable to get any assignments for the last hour.. all I'm getting is messages like:

18:48:17:WU01:FS00:Connecting to 65.254.110.245:8080
18:48:17:WARNING:WU01:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
18:48:17:WU01:FS00:Connecting to 18.218.241.186:80
18:48:18:WARNING:WU01:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
18:48:18:ERROR:WU01:FS00:Exception: Could not get an assignment
rickoic
Posts: 320
Joined: Sat May 23, 2009 4:49 pm
Hardware configuration: eVga x299 DARK 2070 Super, eVGA 2080, eVga 1070, eVga 2080 Super
MSI x399 eVga 2080, eVga 1070, eVga 1070, GT970
Location: Mississippi near Memphis, Tn

Re: Client failing to connect to assigned work server

Post by rickoic »

I'm sure the personnel at Stanford and other places are working their fingers to the bone generating work units for us to crunch on, but it seems to take longer to generate a bunch of them before we scarf them up and the work servers run out of the last batch.

I'm don't know how the procedure works but just wait as they are working as fast as they can. They do have to take lunch/bathroom breaks sometimes.
I'm folding because Dec 2005 I had radical prostate surgery.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
ClawzSkunk
Posts: 6
Joined: Tue Mar 17, 2020 11:46 am

Re: Client failing to connect to assigned work server

Post by ClawzSkunk »

I am waiting.. I just get concerned when I see Work Server: 0.0.0.0 - Collection Server 0.0.0.0
Jesse_V
Site Moderator
Posts: 2850
Joined: Mon Jul 18, 2011 4:44 am
Hardware configuration: OS: Windows 10, Kubuntu 19.04
CPU: i7-6700k
GPU: GTX 970, GTX 1080 TI
RAM: 24 GB DDR4
Location: Western Washington

Re: Client failing to connect to assigned work server

Post by Jesse_V »

ClawzSkunk wrote:I'm getting the same issue with being unable to get any assignments for the last hour.. all I'm getting is messages like:

18:48:17:WU01:FS00:Connecting to 65.254.110.245:8080
18:48:17:WARNING:WU01:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
18:48:17:WU01:FS00:Connecting to 18.218.241.186:80
18:48:18:WARNING:WU01:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
18:48:18:ERROR:WU01:FS00:Exception: Could not get an assignment
I'm seeing those errors as well. The servers are currently drained of workunits due to the unprecedented rate of new users and enthusiasm. They are working as fast as they can to get more in the queue. When they get more in place, you'll likely pick more up. It should be a matter of time, so I'd recommend keeping the software on so you can pick up the work when it becomes available.
F@h is now the top computing platform on the planet and nothing unites people like a dedicated fight against a common enemy. This virus affects all of us. Lets end it together.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Client failing to connect to assigned work server

Post by bruce »

Patience, please

viewtopic.php?f=24&t=32743
ClawzSkunk
Posts: 6
Joined: Tue Mar 17, 2020 11:46 am

Re: Client failing to connect to assigned work server

Post by ClawzSkunk »

bruce wrote:Patience, please

viewtopic.php?f=24&t=32743
Hi Bruce, please don't think I'm being a pest. I'm just trying to manage expectations...

Is it normal to have no available WU's for over 3 hours so far?
Joe_H
Site Admin
Posts: 7937
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Client failing to connect to assigned work server

Post by Joe_H »

After this big influx of new folding participants this weekend, at times my two machines have gone without work for far longer than 3 hours. It is getting better.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
ClawzSkunk
Posts: 6
Joined: Tue Mar 17, 2020 11:46 am

Re: Client failing to connect to assigned work server

Post by ClawzSkunk »

Thanks Joe, if this is normal then I'm happy to wait and let the computer continue. when I said over 3 hours I meant more like 8 though I can appreciate that there are a lot of people that have signed up recently like myself. I just don't want to be wasting a lot of power with the computer on if it's not being put to use if you know what I mean?

I also wanted to re-assure myself that there wasn't a problem somewhere and that this was normal.
davebodger
Posts: 18
Joined: Thu Jan 10, 2008 12:05 am
Hardware configuration: Machine 1: MSI X299 Carbon, i7 7820X @ 4.6GHz all cores, 64Gb DDR4, RTX2080Ti graphics, Win 10 64bit, custom watercooling.
Machine 2: Core i7 980 @ 4.1GHz, 24Gb DDR4, GTX1060 graphics, Win 10 64 bit.
Location: London, UK

Re: Client failing to connect to assigned work server

Post by davebodger »

ClawzSkunk wrote:Thanks Joe, if this is normal then I'm happy to wait and let the computer continue. when I said over 3 hours I meant more like 8 though I can appreciate that there are a lot of people that have signed up recently like myself. I just don't want to be wasting a lot of power with the computer on if it's not being put to use if you know what I mean?

I also wanted to re-assure myself that there wasn't a problem somewhere and that this was normal.
I can confirm that I am only getting 2 to 4 WU per day and often have 8 or even 10 hours between WU, sadly.
I think it's because of the algorithm they use to back off the clients, my client seems to only check for work every couple of hours and as soon as it gets an error or has to wait too long for a response it backs off for another couple of hours.
I also read somewhere that their data centre is seeing the sudden increase in clients and communications as a DDOS attack and so the sysadmins are trying to work around that too.
Hopefully it will get sorted sooner rather than later, but in the meantime I am running BOINC/Rosetta concurrently with F@H so my spare cpu time is not wasted.
Machine 1: MSI X299 Carbon, i7 7820X @ 4.6GHz all cores, 64Gb DDR4, RTX2080Ti graphics, Win 10 64bit, custom watercooling.
Machine 2: Core i7 980 @ 4.1GHz, 24Gb DDR4, GTX1060 graphics, Win 10 64 bit.
Jesse_V
Site Moderator
Posts: 2850
Joined: Mon Jul 18, 2011 4:44 am
Hardware configuration: OS: Windows 10, Kubuntu 19.04
CPU: i7-6700k
GPU: GTX 970, GTX 1080 TI
RAM: 24 GB DDR4
Location: Western Washington

Re: Client failing to connect to assigned work server

Post by Jesse_V »

davebodger wrote:I think it's because of the algorithm they use to back off the clients, my client seems to only check for work every couple of hours and as soon as it gets an error or has to wait too long for a response it backs off for another couple of hours.
I also read somewhere that their data centre is seeing the sudden increase in clients and communications as a DDOS attack and so the sysadmins are trying to work around that too.
Yep, the client software will gradually back off when it gets errors and unexpectedly can't pick up work. Without this, hundreds of thousands of machines would each be quickly pinging the server for work, which only exacerbates problems when the servers are slammed due to legitimate high demand. So the client software will slowly back off and pick up work when it can.
F@h is now the top computing platform on the planet and nothing unites people like a dedicated fight against a common enemy. This virus affects all of us. Lets end it together.
Post Reply