core_15
Moderators: Site Moderators, FAHC Science Team
-
PantherX
- Site Moderator
- Posts: 6986
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: core_15
A short answer: I doubt it.
Not a short answer: During the initial launch of FahCore_15, there was support for some Pre-Fermi GPUs (viewtopic.php?p=158849#p158849) and last time I checked (quite some time ago), the FahCore_15 version for those GPUs was Version 2.15 (Tue Nov 16 08:44:57 PST 2010). After that, there were some additional FahCore_15 releases for Fermi GPUs and then later, Kepler GPUs until FahCore_17 was released. During all this time, I am not sure what happened to FahCore_15 for Pre-Fermi GPUs.
Not a short answer: During the initial launch of FahCore_15, there was support for some Pre-Fermi GPUs (viewtopic.php?p=158849#p158849) and last time I checked (quite some time ago), the FahCore_15 version for those GPUs was Version 2.15 (Tue Nov 16 08:44:57 PST 2010). After that, there were some additional FahCore_15 releases for Fermi GPUs and then later, Kepler GPUs until FahCore_17 was released. During all this time, I am not sure what happened to FahCore_15 for Pre-Fermi GPUs.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
-
7im
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: core_15
What does the requirements section of the windows install guide say?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-
Joe_H
- Site Admin
- Posts: 7926
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: core_15
There was a test of assigning Core_15 WU's to the pre-Fermi GPU's that was discontinued in Oct. 2012. Some folders reported that their cards did successfully fold, but many reported failures. There was a blog post that mentioned the problem - https://folding.stanford.edu/home/updat ... pu-issues/, and there are posts here in the forum that a search should bring up. As PantherX mentioned, early versions of Core_15 did work. But whether the problems were caused by changes in later versions of the core or came from newer drivers was never posted.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3