128.143.199.97/ Reject Status [Some WUs MIA]

Moderators: Site Moderators, FAHC Science Team

sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: 128.143.199.97:8080/ Reject Status [resolving]

Post by sortofageek »

Apparently the one WU of parkut's which did not have a result when I checked before had actually not sent. He sent it this morning and now the result is in the database.
Hi parkut (team 4),
Your WU (P7500 R0 C21 G366) was added to the stats database on 2011-11-17 09:06:30 for 1532.51 points of credit.
Thank you, parkut, for helping me follow up on this.
shunter
Posts: 84
Joined: Sun Apr 06, 2008 8:22 am
Location: Hertfordshire, United Kingdom

Re: 128.143.199.97:8080/ Reject Status [resolving]

Post by shunter »

Thanks for looking these and the others up. The missing ones' logs are as follows

7504 8 175 17 (shunter)

Code: Select all

[04:11:05] 
[04:11:05] + Processing work unit
[04:11:05] Core required: FahCore_a3.exe
[04:11:05] Core found.
[04:11:05] Working on queue slot 08 [November 16 04:11:05 UTC]
[04:11:05] + Working ...
[04:11:05] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 08 -np 8 -checkpoint 10 -forceasm -verbose -lifeline 3768 -version 629'

[04:11:05] 
[04:11:05] *------------------------------*
[04:11:05] Folding@Home Gromacs SMP Core
[04:11:05] Version 2.27 (Dec. 15, 2010)
[04:11:05] 
[04:11:05] Preparing to commence simulation
[04:11:05] - Assembly optimizations manually forced on.
[04:11:05] - Not checking prior termination.
[04:11:06] - Expanded 1760424 -> 2700832 (decompressed 153.4 percent)
[04:11:06] Called DecompressByteArray: compressed_data_size=1760424 data_size=2700832, decompressed_data_size=2700832 diff=0
[04:11:06] - Digital signature verified
[04:11:06] 
[04:11:06] Project: 7504 (Run 8, Clone 175, Gen 17)
[04:11:06] 
[04:11:06] Assembly optimizations on if available.
[04:11:06] Entering M.D.
[04:11:12] Mapping NT from 8 to 8 
[04:11:12] Completed 0 out of 500000 steps  (0%)
[04:13:25] - Autosending finished units... [November 16 04:13:25 UTC]
[04:13:25] Trying to send all finished work units
[04:13:25] + No unsent completed units remaining.
[04:13:25] - Autosend completed
[04:15:05] Completed 5000 out of 500000 steps  (1%)
[04:18:56] Completed 10000 out of 500000 steps  (2%)
[04:22:46] Completed 15000 out of 500000 steps  (3%)
[04:26:51] Completed 20000 out of 500000 steps  (4%)
[04:30:41] Completed 25000 out of 500000 steps  (5%)
[04:34:32] Completed 30000 out of 500000 steps  (6%)
[04:38:23] Completed 35000 out of 500000 steps  (7%)
[04:42:15] Completed 40000 out of 500000 steps  (8%)
[04:46:05] Completed 45000 out of 500000 steps  (9%)
[04:49:56] Completed 50000 out of 500000 steps  (10%)
[04:53:47] Completed 55000 out of 500000 steps  (11%)
[04:57:37] Completed 60000 out of 500000 steps  (12%)
[05:01:29] Completed 65000 out of 500000 steps  (13%)
[05:05:20] Completed 70000 out of 500000 steps  (14%)
[05:09:11] Completed 75000 out of 500000 steps  (15%)
[05:13:01] Completed 80000 out of 500000 steps  (16%)
[05:16:53] Completed 85000 out of 500000 steps  (17%)
[05:20:45] Completed 90000 out of 500000 steps  (18%)
[05:24:36] Completed 95000 out of 500000 steps  (19%)
[05:28:27] Completed 100000 out of 500000 steps  (20%)
[05:32:16] Completed 105000 out of 500000 steps  (21%)
[05:36:06] Completed 110000 out of 500000 steps  (22%)
[05:39:59] Completed 115000 out of 500000 steps  (23%)
[05:43:49] Completed 120000 out of 500000 steps  (24%)
[05:47:40] Completed 125000 out of 500000 steps  (25%)
[05:51:31] Completed 130000 out of 500000 steps  (26%)
[05:55:20] Completed 135000 out of 500000 steps  (27%)
[05:59:11] Completed 140000 out of 500000 steps  (28%)
[06:03:02] Completed 145000 out of 500000 steps  (29%)
[06:06:52] Completed 150000 out of 500000 steps  (30%)
[06:10:44] Completed 155000 out of 500000 steps  (31%)
[06:14:35] Completed 160000 out of 500000 steps  (32%)
[06:18:27] Completed 165000 out of 500000 steps  (33%)
[06:22:18] Completed 170000 out of 500000 steps  (34%)
[06:26:08] Completed 175000 out of 500000 steps  (35%)
[06:29:59] Completed 180000 out of 500000 steps  (36%)
[06:33:50] Completed 185000 out of 500000 steps  (37%)
[06:37:40] Completed 190000 out of 500000 steps  (38%)
[06:41:32] Completed 195000 out of 500000 steps  (39%)
[06:45:21] Completed 200000 out of 500000 steps  (40%)
[06:49:12] Completed 205000 out of 500000 steps  (41%)
[06:53:04] Completed 210000 out of 500000 steps  (42%)
[06:56:55] Completed 215000 out of 500000 steps  (43%)
[07:00:46] Completed 220000 out of 500000 steps  (44%)
[07:04:38] Completed 225000 out of 500000 steps  (45%)
[07:08:30] Completed 230000 out of 500000 steps  (46%)
[07:12:21] Completed 235000 out of 500000 steps  (47%)
[07:16:12] Completed 240000 out of 500000 steps  (48%)
[07:20:04] Completed 245000 out of 500000 steps  (49%)
[07:23:56] Completed 250000 out of 500000 steps  (50%)
[07:27:47] Completed 255000 out of 500000 steps  (51%)
[07:31:38] Completed 260000 out of 500000 steps  (52%)
[07:35:28] Completed 265000 out of 500000 steps  (53%)
[07:39:20] Completed 270000 out of 500000 steps  (54%)
[07:43:12] Completed 275000 out of 500000 steps  (55%)
[07:47:03] Completed 280000 out of 500000 steps  (56%)
[07:50:54] Completed 285000 out of 500000 steps  (57%)
[07:54:46] Completed 290000 out of 500000 steps  (58%)
[07:58:37] Completed 295000 out of 500000 steps  (59%)
[08:02:28] Completed 300000 out of 500000 steps  (60%)
[08:06:19] Completed 305000 out of 500000 steps  (61%)
[08:10:11] Completed 310000 out of 500000 steps  (62%)
[08:14:03] Completed 315000 out of 500000 steps  (63%)
[08:17:54] Completed 320000 out of 500000 steps  (64%)
[08:21:46] Completed 325000 out of 500000 steps  (65%)
[08:25:37] Completed 330000 out of 500000 steps  (66%)
[08:29:28] Completed 335000 out of 500000 steps  (67%)
[08:33:18] Completed 340000 out of 500000 steps  (68%)
[08:37:08] Completed 345000 out of 500000 steps  (69%)
[08:40:59] Completed 350000 out of 500000 steps  (70%)
[08:44:50] Completed 355000 out of 500000 steps  (71%)
[08:48:42] Completed 360000 out of 500000 steps  (72%)
[08:52:33] Completed 365000 out of 500000 steps  (73%)
[08:56:24] Completed 370000 out of 500000 steps  (74%)
[09:00:15] Completed 375000 out of 500000 steps  (75%)
[09:04:05] Completed 380000 out of 500000 steps  (76%)
[09:07:56] Completed 385000 out of 500000 steps  (77%)
[09:11:47] Completed 390000 out of 500000 steps  (78%)
[09:15:38] Completed 395000 out of 500000 steps  (79%)
[09:19:29] Completed 400000 out of 500000 steps  (80%)
[09:23:21] Completed 405000 out of 500000 steps  (81%)
[09:27:12] Completed 410000 out of 500000 steps  (82%)
[09:31:04] Completed 415000 out of 500000 steps  (83%)
[09:34:55] Completed 420000 out of 500000 steps  (84%)
[09:38:46] Completed 425000 out of 500000 steps  (85%)
[09:42:36] Completed 430000 out of 500000 steps  (86%)
[09:46:28] Completed 435000 out of 500000 steps  (87%)
[09:50:19] Completed 440000 out of 500000 steps  (88%)
[09:54:10] Completed 445000 out of 500000 steps  (89%)
[09:58:02] Completed 450000 out of 500000 steps  (90%)
[10:01:53] Completed 455000 out of 500000 steps  (91%)
[10:05:43] Completed 460000 out of 500000 steps  (92%)
[10:09:35] Completed 465000 out of 500000 steps  (93%)
[10:13:25] - Autosending finished units... [November 16 10:13:25 UTC]
[10:13:25] Trying to send all finished work units
[10:13:25] + No unsent completed units remaining.
[10:13:25] - Autosend completed
[10:13:27] Completed 470000 out of 500000 steps  (94%)
[10:17:18] Completed 475000 out of 500000 steps  (95%)
[10:21:08] Completed 480000 out of 500000 steps  (96%)
[10:24:59] Completed 485000 out of 500000 steps  (97%)
[10:28:50] Completed 490000 out of 500000 steps  (98%)
[10:32:41] Completed 495000 out of 500000 steps  (99%)
[10:36:32] Completed 500000 out of 500000 steps  (100%)
[10:36:33] DynamicWrapper: Finished Work Unit: sleep=10000
[10:36:43] 
[10:36:43] Finished Work Unit:
[10:36:43] - Reading up to 5030784 from "work/wudata_08.trr": Read 5030784
[10:36:43] trr file hash check passed.
[10:36:43] - Reading up to 5405936 from "work/wudata_08.xtc": Read 5405936
[10:36:43] xtc file hash check passed.
[10:36:43] edr file hash check passed.
[10:36:43] logfile size: 325826
[10:36:43] Leaving Run
[10:36:44] - Writing 10794950 bytes of core data to disk...
[10:36:47] Done: 10794438 -> 10207976 (compressed to 94.5 percent)
[10:36:47]   ... Done.
[10:36:49] - Shutting down core
[10:36:49] 
[10:36:49] Folding@home Core Shutdown: FINISHED_UNIT
[10:36:53] CoreStatus = 64 (100)
[10:36:53] Unit 8 finished with 95 percent of time to deadline remaining.
[10:36:53] Updated performance fraction: 0.948486
[10:36:53] Sending work to server
[10:36:53] Project: 7504 (Run 8, Clone 175, Gen 17)


[10:36:53] + Attempting to send results [November 16 10:36:53 UTC]
[10:36:53] - Reading file work/wuresults_08.dat from core
[10:36:53]   (Read 10208488 bytes from disk)
[10:36:53] Connecting to http://128.143.199.97:8080/
[10:37:14] - Couldn't send HTTP request to server
[10:37:14] + Could not connect to Work Server (results)
[10:37:14]     (128.143.199.97:8080)
[10:37:14] + Retrying using alternative port
[10:37:14] Connecting to http://128.143.199.97:80/
[10:37:36] - Couldn't send HTTP request to server
[10:37:36] + Could not connect to Work Server (results)
[10:37:36]     (128.143.199.97:80)
[10:37:36] - Error: Could not transmit unit 08 (completed November 16) to work server.
[10:37:36] - 1 failed uploads of this unit.
[10:37:36]   Keeping unit 08 in queue.
[10:37:36] Trying to send all finished work units
[10:37:36] Project: 7504 (Run 8, Clone 175, Gen 17)


[10:37:36] + Attempting to send results [November 16 10:37:36 UTC]
[10:37:36] - Reading file work/wuresults_08.dat from core
[10:37:36]   (Read 10208488 bytes from disk)
[10:37:36] Connecting to http://128.143.199.97:8080/
[10:37:57] - Couldn't send HTTP request to server
[10:37:57] + Could not connect to Work Server (results)
[10:37:57]     (128.143.199.97:8080)
[10:37:57] + Retrying using alternative port
[10:37:57] Connecting to http://128.143.199.97:80/
[10:38:18] - Couldn't send HTTP request to server
[10:38:18] + Could not connect to Work Server (results)
[10:38:18]     (128.143.199.97:80)
[10:38:18] - Error: Could not transmit unit 08 (completed November 16) to work server.
[10:38:18] - 2 failed uploads of this unit.


[10:38:18] + Attempting to send results [November 16 10:38:18 UTC]
[10:38:18] - Reading file work/wuresults_08.dat from core
[10:38:18]   (Read 10208488 bytes from disk)
[10:38:18] Connecting to http://130.237.165.141:8080/
[10:38:36] Posted data.
[10:38:36] Initial: 0000; - Uploaded at ~553 kB/s
[10:38:36] - Averaged speed for that direction ~497 kB/s
[10:38:36] + Results successfully sent
[10:38:36] Thank you for your contribution to Folding@Home.
[10:38:36] + Number of Units Completed: 1548

[10:38:36]   Successfully sent unit 08 to Collection server.
[10:38:36] + Sent 1 of 1 completed units to the server
[10:38:36] - Preparing to get new work unit...
[10:38:36] Cleaning up work directory
[10:38:36] + Attempting to get work packet
[10:38:36] Passkey found
7504 10 32 22 (alias ravey)

Code: Select all

[15:51:25] *------------------------------*
[15:51:25] Folding@Home Gromacs SMP Core
[15:51:25] Version 2.27 (Dec. 15, 2010)
[15:51:25] 
[15:51:25] Preparing to commence simulation
[15:51:25] - Assembly optimizations manually forced on.
[15:51:25] - Not checking prior termination.
[15:51:26] - Expanded 1764542 -> 2700832 (decompressed 153.0 percent)
[15:51:26] Called DecompressByteArray: compressed_data_size=1764542 data_size=2700832, decompressed_data_size=2700832 diff=0
[15:51:26] - Digital signature verified
[15:51:26] 
[15:51:26] Project: 7504 (Run 10, Clone 32, Gen 22)
[15:51:26] 
[15:51:26] Assembly optimizations on if available.
[15:51:26] Entering M.D.
[15:51:32] Mapping NT from 4 to 4 
[15:51:33] Completed 0 out of 500000 steps  (0%)
[16:03:02] Completed 5000 out of 500000 steps  (1%)
[16:14:21] Completed 10000 out of 500000 steps  (2%)
[16:19:47] - Autosending finished units... [November 15 16:19:47 UTC]
[16:19:47] Trying to send all finished work units
[16:19:47] + No unsent completed units remaining.
[16:19:47] - Autosend completed
[16:25:34] Completed 15000 out of 500000 steps  (3%)
[16:36:54] Completed 20000 out of 500000 steps  (4%)
[16:48:16] Completed 25000 out of 500000 steps  (5%)
[16:58:53] Completed 30000 out of 500000 steps  (6%)
[17:08:55] Completed 35000 out of 500000 steps  (7%)
[17:18:56] Completed 40000 out of 500000 steps  (8%)
[17:28:58] Completed 45000 out of 500000 steps  (9%)
[17:38:59] Completed 50000 out of 500000 steps  (10%)
[17:49:01] Completed 55000 out of 500000 steps  (11%)
[17:59:02] Completed 60000 out of 500000 steps  (12%)
[18:09:05] Completed 65000 out of 500000 steps  (13%)
[18:19:08] Completed 70000 out of 500000 steps  (14%)
[18:29:12] Completed 75000 out of 500000 steps  (15%)
[18:39:18] Completed 80000 out of 500000 steps  (16%)
[18:49:22] Completed 85000 out of 500000 steps  (17%)
[18:59:50] Completed 90000 out of 500000 steps  (18%)
[19:11:05] Completed 95000 out of 500000 steps  (19%)
[19:22:40] Completed 100000 out of 500000 steps  (20%)
[19:33:56] Completed 105000 out of 500000 steps  (21%)
[19:45:13] Completed 110000 out of 500000 steps  (22%)
[19:56:21] Completed 115000 out of 500000 steps  (23%)
[20:07:32] Completed 120000 out of 500000 steps  (24%)
[20:18:50] Completed 125000 out of 500000 steps  (25%)
[20:30:06] Completed 130000 out of 500000 steps  (26%)
[20:40:27] Completed 135000 out of 500000 steps  (27%)
[20:50:29] Completed 140000 out of 500000 steps  (28%)
[21:00:32] Completed 145000 out of 500000 steps  (29%)
[21:10:35] Completed 150000 out of 500000 steps  (30%)
[21:20:37] Completed 155000 out of 500000 steps  (31%)
[21:30:40] Completed 160000 out of 500000 steps  (32%)
[21:40:44] Completed 165000 out of 500000 steps  (33%)
[21:50:48] Completed 170000 out of 500000 steps  (34%)
[22:00:53] Completed 175000 out of 500000 steps  (35%)
[22:10:59] Completed 180000 out of 500000 steps  (36%)
[22:19:47] - Autosending finished units... [November 15 22:19:47 UTC]
[22:19:47] Trying to send all finished work units
[22:19:47] + No unsent completed units remaining.
[22:19:47] - Autosend completed
[22:21:04] Completed 185000 out of 500000 steps  (37%)
[22:31:09] Completed 190000 out of 500000 steps  (38%)
[22:42:00] Completed 195000 out of 500000 steps  (39%)
[22:53:23] Completed 200000 out of 500000 steps  (40%)
[23:05:06] Completed 205000 out of 500000 steps  (41%)
[23:16:19] Completed 210000 out of 500000 steps  (42%)
[23:27:42] Completed 215000 out of 500000 steps  (43%)
[23:39:07] Completed 220000 out of 500000 steps  (44%)
[23:50:30] Completed 225000 out of 500000 steps  (45%)
[00:02:23] Completed 230000 out of 500000 steps  (46%)
[00:13:34] Completed 235000 out of 500000 steps  (47%)
[00:23:47] Completed 240000 out of 500000 steps  (48%)
[00:33:49] Completed 245000 out of 500000 steps  (49%)
[00:43:51] Completed 250000 out of 500000 steps  (50%)
[00:53:54] Completed 255000 out of 500000 steps  (51%)
[01:03:56] Completed 260000 out of 500000 steps  (52%)
[01:13:59] Completed 265000 out of 500000 steps  (53%)
[01:24:01] Completed 270000 out of 500000 steps  (54%)
[01:34:03] Completed 275000 out of 500000 steps  (55%)
[01:44:06] Completed 280000 out of 500000 steps  (56%)
[01:54:08] Completed 285000 out of 500000 steps  (57%)
[02:04:11] Completed 290000 out of 500000 steps  (58%)
[02:14:15] Completed 295000 out of 500000 steps  (59%)
[02:25:15] Completed 300000 out of 500000 steps  (60%)
[02:36:31] Completed 305000 out of 500000 steps  (61%)
[02:48:05] Completed 310000 out of 500000 steps  (62%)
[02:59:08] Completed 315000 out of 500000 steps  (63%)
[03:10:24] Completed 320000 out of 500000 steps  (64%)
[03:21:42] Completed 325000 out of 500000 steps  (65%)
[03:32:46] Completed 330000 out of 500000 steps  (66%)
[03:44:07] Completed 335000 out of 500000 steps  (67%)
[03:55:17] Completed 340000 out of 500000 steps  (68%)
[04:05:19] Completed 345000 out of 500000 steps  (69%)
[04:15:23] Completed 350000 out of 500000 steps  (70%)
[04:19:47] - Autosending finished units... [November 16 04:19:47 UTC]
[04:19:47] Trying to send all finished work units
[04:19:47] + No unsent completed units remaining.
[04:19:47] - Autosend completed
[04:25:26] Completed 355000 out of 500000 steps  (71%)
[04:35:31] Completed 360000 out of 500000 steps  (72%)
[04:45:36] Completed 365000 out of 500000 steps  (73%)
[04:55:40] Completed 370000 out of 500000 steps  (74%)
[05:05:44] Completed 375000 out of 500000 steps  (75%)
[05:15:49] Completed 380000 out of 500000 steps  (76%)
[05:25:53] Completed 385000 out of 500000 steps  (77%)
[05:35:57] Completed 390000 out of 500000 steps  (78%)
[05:46:02] Completed 395000 out of 500000 steps  (79%)
[05:56:10] Completed 400000 out of 500000 steps  (80%)
[06:07:22] Completed 405000 out of 500000 steps  (81%)
[06:18:48] Completed 410000 out of 500000 steps  (82%)
[06:30:16] Completed 415000 out of 500000 steps  (83%)
[06:41:36] Completed 420000 out of 500000 steps  (84%)
[06:52:48] Completed 425000 out of 500000 steps  (85%)
[07:04:09] Completed 430000 out of 500000 steps  (86%)
[07:15:29] Completed 435000 out of 500000 steps  (87%)
[07:26:54] Completed 440000 out of 500000 steps  (88%)
[07:37:36] Completed 445000 out of 500000 steps  (89%)
[07:47:39] Completed 450000 out of 500000 steps  (90%)
[07:57:41] Completed 455000 out of 500000 steps  (91%)
[08:07:44] Completed 460000 out of 500000 steps  (92%)
[08:17:47] Completed 465000 out of 500000 steps  (93%)
[08:27:48] Completed 470000 out of 500000 steps  (94%)
[08:37:53] Completed 475000 out of 500000 steps  (95%)
[08:47:55] Completed 480000 out of 500000 steps  (96%)
[08:57:58] Completed 485000 out of 500000 steps  (97%)
[09:07:59] Completed 490000 out of 500000 steps  (98%)
[09:18:00] Completed 495000 out of 500000 steps  (99%)
[09:28:01] Completed 500000 out of 500000 steps  (100%)
[09:28:02] DynamicWrapper: Finished Work Unit: sleep=10000
[09:28:12] 
[09:28:12] Finished Work Unit:
[09:28:12] - Reading up to 5030784 from "work/wudata_08.trr": Read 5030784
[09:28:13] trr file hash check passed.
[09:28:13] - Reading up to 5378368 from "work/wudata_08.xtc": Read 5378368
[09:28:13] xtc file hash check passed.
[09:28:13] edr file hash check passed.
[09:28:13] logfile size: 328359
[09:28:13] Leaving Run
[09:28:16] - Writing 10769915 bytes of core data to disk...
[09:28:20] Done: 10769403 -> 10190732 (compressed to 94.6 percent)
[09:28:21]   ... Done.
[09:28:23] - Shutting down core
[09:28:23] 
[09:28:23] Folding@home Core Shutdown: FINISHED_UNIT
[09:28:26] CoreStatus = 64 (100)
[09:28:26] Unit 8 finished with 86 percent of time to deadline remaining.
[09:28:26] Updated performance fraction: 0.872190
[09:28:26] Sending work to server
[09:28:26] Project: 7504 (Run 10, Clone 32, Gen 22)


[09:28:26] + Attempting to send results [November 16 09:28:26 UTC]
[09:28:26] - Reading file work/wuresults_08.dat from core
[09:28:26]   (Read 10191244 bytes from disk)
[09:28:26] Connecting to http://128.143.199.97:8080/
[09:32:24] - Couldn't send HTTP request to server
[09:32:24] + Could not connect to Work Server (results)
[09:32:24]     (128.143.199.97:8080)
[09:32:24] + Retrying using alternative port
[09:32:24] Connecting to http://128.143.199.97:80/
[09:32:45] - Couldn't send HTTP request to server
[09:32:45] + Could not connect to Work Server (results)
[09:32:45]     (128.143.199.97:80)
[09:32:45] - Error: Could not transmit unit 08 (completed November 16) to work server.
[09:32:45] - 1 failed uploads of this unit.
[09:32:45]   Keeping unit 08 in queue.
[09:32:45] Trying to send all finished work units
[09:32:45] Project: 7504 (Run 10, Clone 32, Gen 22)


[09:32:45] + Attempting to send results [November 16 09:32:45 UTC]
[09:32:45] - Reading file work/wuresults_08.dat from core
[09:32:45]   (Read 10191244 bytes from disk)
[09:32:45] Connecting to http://128.143.199.97:8080/
[09:36:18] - Couldn't send HTTP request to server
[09:36:18] + Could not connect to Work Server (results)
[09:36:18]     (128.143.199.97:8080)
[09:36:18] + Retrying using alternative port
[09:36:18] Connecting to http://128.143.199.97:80/
[09:36:39] - Couldn't send HTTP request to server
[09:36:39] + Could not connect to Work Server (results)
[09:36:39]     (128.143.199.97:80)
[09:36:39] - Error: Could not transmit unit 08 (completed November 16) to work server.
[09:36:39] - 2 failed uploads of this unit.


[09:36:39] + Attempting to send results [November 16 09:36:39 UTC]
[09:36:39] - Reading file work/wuresults_08.dat from core
[09:36:39]   (Read 10191244 bytes from disk)
[09:36:39] Connecting to http://130.237.165.141:8080/
[09:36:56] Posted data.
[09:36:56] Initial: 0000; - Uploaded at ~585 kB/s
[09:36:56] - Averaged speed for that direction ~414 kB/s
[09:36:56] + Results successfully sent
[09:36:56] Thank you for your contribution to Folding@Home.
[09:36:56] + Number of Units Completed: 1141

[09:36:56]   Successfully sent unit 08 to Collection server.
[09:36:58] + Sent 1 of 1 completed units to the server
[09:36:58] - Preparing to get new work unit...
[09:36:58] Cleaning up work directory
[09:36:58] + Attempting to get work packet
[09:36:58] Passkey found

7500 0 310 50 (alias frostushenon)

Code: Select all

[21:33:43] 
[21:33:43] Preparing to commence simulation
[21:33:43] - Assembly optimizations manually forced on.
[21:33:43] - Not checking prior termination.
[21:33:44] - Expanded 1248094 -> 2077012 (decompressed 166.4 percent)
[21:33:44] Called DecompressByteArray: compressed_data_size=1248094 data_size=2077012, decompressed_data_size=2077012 diff=0
[21:33:44] - Digital signature verified
[21:33:44] 
[21:33:44] Project: 7500 (Run 0, Clone 310, Gen 50)
[21:33:44] 
[21:33:44] Assembly optimizations on if available.
[21:33:44] Entering M.D.
[21:33:50] Mapping NT from 4 to 4 
[21:33:50] Completed 0 out of 500000 steps  (0%)
[21:39:32] Completed 5000 out of 500000 steps  (1%)
[21:45:13] Completed 10000 out of 500000 steps  (2%)
[21:50:52] Completed 15000 out of 500000 steps  (3%)
[21:56:31] Completed 20000 out of 500000 steps  (4%)
[22:02:11] Completed 25000 out of 500000 steps  (5%)
[22:07:52] Completed 30000 out of 500000 steps  (6%)
[22:13:35] Completed 35000 out of 500000 steps  (7%)
[22:19:16] Completed 40000 out of 500000 steps  (8%)
[22:24:57] Completed 45000 out of 500000 steps  (9%)
[22:30:43] Completed 50000 out of 500000 steps  (10%)
[22:36:28] Completed 55000 out of 500000 steps  (11%)
[22:42:15] Completed 60000 out of 500000 steps  (12%)
[22:48:02] Completed 65000 out of 500000 steps  (13%)
[22:53:48] Completed 70000 out of 500000 steps  (14%)
[22:59:31] Completed 75000 out of 500000 steps  (15%)
[23:05:18] Completed 80000 out of 500000 steps  (16%)
[23:11:03] Completed 85000 out of 500000 steps  (17%)
[23:16:44] Completed 90000 out of 500000 steps  (18%)
[23:22:24] Completed 95000 out of 500000 steps  (19%)
[23:28:07] Completed 100000 out of 500000 steps  (20%)
[23:33:49] Completed 105000 out of 500000 steps  (21%)
[23:39:29] Completed 110000 out of 500000 steps  (22%)
[23:45:09] Completed 115000 out of 500000 steps  (23%)
[23:50:49] Completed 120000 out of 500000 steps  (24%)
[23:56:31] Completed 125000 out of 500000 steps  (25%)
[00:02:11] Completed 130000 out of 500000 steps  (26%)
[00:07:52] Completed 135000 out of 500000 steps  (27%)
[00:13:34] Completed 140000 out of 500000 steps  (28%)
[00:19:16] Completed 145000 out of 500000 steps  (29%)
[00:24:58] Completed 150000 out of 500000 steps  (30%)
[00:30:40] Completed 155000 out of 500000 steps  (31%)
[00:36:24] Completed 160000 out of 500000 steps  (32%)
[00:42:07] Completed 165000 out of 500000 steps  (33%)
[00:46:43] - Autosending finished units... [November 16 00:46:43 UTC]
[00:46:43] Trying to send all finished work units
[00:46:43] + No unsent completed units remaining.
[00:46:43] - Autosend completed
[00:47:49] Completed 170000 out of 500000 steps  (34%)
[00:53:31] Completed 175000 out of 500000 steps  (35%)
[00:59:14] Completed 180000 out of 500000 steps  (36%)
[01:04:57] Completed 185000 out of 500000 steps  (37%)
[01:10:39] Completed 190000 out of 500000 steps  (38%)
[01:16:20] Completed 195000 out of 500000 steps  (39%)
[01:22:01] Completed 200000 out of 500000 steps  (40%)
[01:27:44] Completed 205000 out of 500000 steps  (41%)
[01:33:27] Completed 210000 out of 500000 steps  (42%)
[01:39:08] Completed 215000 out of 500000 steps  (43%)
[01:44:51] Completed 220000 out of 500000 steps  (44%)
[01:50:34] Completed 225000 out of 500000 steps  (45%)
[01:56:16] Completed 230000 out of 500000 steps  (46%)
[02:01:58] Completed 235000 out of 500000 steps  (47%)
[02:07:40] Completed 240000 out of 500000 steps  (48%)
[02:13:23] Completed 245000 out of 500000 steps  (49%)
[02:19:04] Completed 250000 out of 500000 steps  (50%)
[02:24:47] Completed 255000 out of 500000 steps  (51%)
[02:30:29] Completed 260000 out of 500000 steps  (52%)
[02:36:12] Completed 265000 out of 500000 steps  (53%)
[02:41:58] Completed 270000 out of 500000 steps  (54%)
[02:47:46] Completed 275000 out of 500000 steps  (55%)
[02:53:32] Completed 280000 out of 500000 steps  (56%)
[02:59:21] Completed 285000 out of 500000 steps  (57%)
[03:05:09] Completed 290000 out of 500000 steps  (58%)
[03:10:57] Completed 295000 out of 500000 steps  (59%)
[03:16:39] Completed 300000 out of 500000 steps  (60%)
[03:22:21] Completed 305000 out of 500000 steps  (61%)
[03:28:06] Completed 310000 out of 500000 steps  (62%)
[03:33:48] Completed 315000 out of 500000 steps  (63%)
[03:39:30] Completed 320000 out of 500000 steps  (64%)
[03:45:11] Completed 325000 out of 500000 steps  (65%)
[03:50:53] Completed 330000 out of 500000 steps  (66%)
[03:56:35] Completed 335000 out of 500000 steps  (67%)
[04:02:16] Completed 340000 out of 500000 steps  (68%)
[04:07:58] Completed 345000 out of 500000 steps  (69%)
[04:13:45] Completed 350000 out of 500000 steps  (70%)
[04:19:30] Completed 355000 out of 500000 steps  (71%)
[04:25:18] Completed 360000 out of 500000 steps  (72%)
[04:31:04] Completed 365000 out of 500000 steps  (73%)
[04:36:46] Completed 370000 out of 500000 steps  (74%)
[04:42:30] Completed 375000 out of 500000 steps  (75%)
[04:48:15] Completed 380000 out of 500000 steps  (76%)
[04:54:03] Completed 385000 out of 500000 steps  (77%)
[04:59:45] Completed 390000 out of 500000 steps  (78%)
[05:05:28] Completed 395000 out of 500000 steps  (79%)
[05:11:13] Completed 400000 out of 500000 steps  (80%)
[05:16:59] Completed 405000 out of 500000 steps  (81%)
[05:22:43] Completed 410000 out of 500000 steps  (82%)
[05:28:25] Completed 415000 out of 500000 steps  (83%)
[05:34:10] Completed 420000 out of 500000 steps  (84%)
[05:39:56] Completed 425000 out of 500000 steps  (85%)
[05:45:39] Completed 430000 out of 500000 steps  (86%)
[05:51:22] Completed 435000 out of 500000 steps  (87%)
[05:57:04] Completed 440000 out of 500000 steps  (88%)
[06:02:47] Completed 445000 out of 500000 steps  (89%)
[06:08:29] Completed 450000 out of 500000 steps  (90%)
[06:14:11] Completed 455000 out of 500000 steps  (91%)
[06:19:54] Completed 460000 out of 500000 steps  (92%)
[06:25:34] Completed 465000 out of 500000 steps  (93%)
[06:31:15] Completed 470000 out of 500000 steps  (94%)
[06:36:55] Completed 475000 out of 500000 steps  (95%)
[06:42:37] Completed 480000 out of 500000 steps  (96%)
[06:46:43] - Autosending finished units... [November 16 06:46:43 UTC]
[06:46:43] Trying to send all finished work units
[06:46:43] + No unsent completed units remaining.
[06:46:43] - Autosend completed
[06:48:18] Completed 485000 out of 500000 steps  (97%)
[06:54:00] Completed 490000 out of 500000 steps  (98%)
[06:59:40] Completed 495000 out of 500000 steps  (99%)
[07:05:22] Completed 500000 out of 500000 steps  (100%)
[07:05:22] DynamicWrapper: Finished Work Unit: sleep=10000
[07:05:32] 
[07:05:32] Finished Work Unit:
[07:05:32] - Reading up to 3430800 from "work/wudata_08.trr": Read 3430800
[07:05:32] trr file hash check passed.
[07:05:32] - Reading up to 3693544 from "work/wudata_08.xtc": Read 3693544
[07:05:32] xtc file hash check passed.
[07:05:32] edr file hash check passed.
[07:05:32] logfile size: 324093
[07:05:32] Leaving Run
[07:05:35] - Writing 7480841 bytes of core data to disk...
[07:05:37] Done: 7480329 -> 7016099 (compressed to 93.7 percent)
[07:05:37]   ... Done.
[07:05:38] - Shutting down core
[07:05:38] 
[07:05:38] Folding@home Core Shutdown: FINISHED_UNIT
[07:05:38] CoreStatus = 64 (100)
[07:05:38] Unit 8 finished with 90 percent of time to deadline remaining.
[07:05:38] Updated performance fraction: 0.898179
[07:05:38] Sending work to server
[07:05:38] Project: 7500 (Run 0, Clone 310, Gen 50)


[07:05:38] + Attempting to send results [November 16 07:05:38 UTC]
[07:05:38] - Reading file work/wuresults_08.dat from core
[07:05:38]   (Read 7016611 bytes from disk)
[07:05:38] Connecting to http://128.143.199.97:8080/
[07:32:34] ***** Got an Activate signal (2)
[07:32:34] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [November 16 07:32:46 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/david/fah
Executable: ./fah6
Arguments: -smp -forceasm -verbosity 9 -config 

[07:32:46] - Ask before connecting: No
[07:32:46] - User name: frostushenon (Team 46590)
[07:32:46] - User ID: 10D47FAC530FB09E
[07:32:46] - Machine ID: 1
[07:32:46] 
[07:32:46] Configuring Folding@Home...


[07:32:50] - Ask before connecting: No
[07:32:50] - User name: frostushenon (Team 46590)
[07:32:50] - User ID: 10D47FAC530FB09E
[07:32:50] - Machine ID: 1
[07:32:50] 
[07:32:50] Loaded queue successfully.
[07:32:50] - Autosending finished units... [November 16 07:32:50 UTC]
[07:32:50] - Preparing to get new work unit...
[07:32:50] Trying to send all finished work units
[07:32:50] Cleaning up work directory
[07:32:50] Project: 7500 (Run 0, Clone 310, Gen 50)


[07:32:50] + Attempting to send results [November 16 07:32:50 UTC]
[07:32:50] - Reading file work/wuresults_08.dat from core
[07:32:50]   (Read 7016611 bytes from disk)
[07:32:50] Connecting to http://128.143.199.97:8080/
[07:32:51] + Attempting to get work packet
[07:32:51] Passkey found
[07:32:51] - Will indicate memory of 1879 MB
[07:32:51] - Connecting to assignment server
[07:32:51] Connecting to http://assign.stanford.edu:8080/
[07:32:52] Posted data.
[07:32:52] Initial: 8F80; - Successful: assigned to (128.143.199.97).
[07:32:52] + News From Folding@Home: Welcome to Folding@Home
[07:32:52] Loaded queue successfully.
[07:32:52] Connecting to http://128.143.199.97:8080/
[07:34:52] Posted data.
[07:54:52] Initial: 0070; ***** Got an Activate signal (2)
[07:56:18] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [November 16 07:56:25 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/david/fah
Executable: ./fah6
Arguments: -smp -forceasm -verbosity 9 -config 

[07:56:25] - Ask before connecting: No
[07:56:25] - User name: frostushenon (Team 46590)
[07:56:25] - User ID: 10D47FAC530FB09E
[07:56:25] - Machine ID: 1
[07:56:25] 
[07:56:25] Configuring Folding@Home...


[07:56:29] - Ask before connecting: No
[07:56:29] - User name: frostushenon (Team 46590)
[07:56:29] - User ID: 10D47FAC530FB09E
[07:56:29] - Machine ID: 1
[07:56:29] 
[07:56:29] Loaded queue successfully.
[November] - Preparing to get new work unit...
[07:56:29] - Autosending finished units... [November 16 07:56:29 UTC]
[07:56:29] Cleaning up work directory
[07:56:29] Trying to send all finished work units
[07:56:29] Project: 7500 (Run 0, Clone 310, Gen 50)


[07:56:29] + Attempting to send results [November 16 07:56:29 UTC]
[07:56:29] - Reading file work/wuresults_08.dat from core
[07:56:29] + Attempting to get work packet
[07:56:29] Passkey found
[07:56:29] - Will indicate memory of 1879 MB
[07:56:29]   (Read 7016611 bytes from disk)
[07:56:29] - Connecting to assignment server
[07:56:29] Connecting to http://assign.stanford.edu:8080/
[07:56:29] Connecting to http://128.143.199.97:8080/
[07:56:30] Posted data.
[07:56:30] Initial: 8F80; - Successful: assigned to (128.143.199.97).
[07:56:30] + News From Folding@Home: Welcome to Folding@Home
[07:56:30] Loaded queue successfully.
[07:56:30] Connecting to http://128.143.199.97:8080/
[07:59:10] ***** Got an Activate signal (2)
[07:59:10] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [November 16 08:00:52 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/david/fah
Executable: ./fah6
Arguments: -smp -forceasm -verbosity 9 -config 

[08:00:52] - Ask before connecting: No
[08:00:52] - User name: frostushenon (Team 46590)
[08:00:52] - User ID: 10D47FAC530FB09E
[08:00:52] - Machine ID: 1
[08:00:52] 
[08:00:52] Configuring Folding@Home...


[08:00:56] - Ask before connecting: No
[08:00:56] - User name: frostushenon (Team 46590)
[08:00:56] - User ID: 10D47FAC530FB09E
[08:00:56] - Machine ID: 1
[08:00:56] 
[08:00:56] Loaded queue successfully.
[08:00:56] - Preparing to get new work unit...
[08:00:56] - Autosending finished units... [08:00:56]
[08:00:56] Cleaning up work directory
[08:00:56] Trying to send all finished work units
[08:00:56] Project: 7500 (Run 0, Clone 310, Gen 50)


[08:00:56] + Attempting to send results [November 16 08:00:56 UTC]
[08:00:56] + Attempting to get work packet
[08:00:56] - Reading file work/wuresults_08.dat from core
[08:00:56] Passkey found
[08:00:56]   (Read 7016611 bytes from disk)
[08:00:56] Connecting to http://128.143.199.97:8080/
[08:00:56] - Will indicate memory of 1879 MB
[08:00:56] - Connecting to assignment server
[08:00:56] Connecting to http://assign.stanford.edu:8080/
[08:00:57] Posted data.
[08:00:57] Initial: 8F80; - Successful: assigned to (128.143.199.97).
[08:00:57] + News From Folding@Home: Welcome to Folding@Home
[08:00:57] Loaded queue successfully.
[08:00:57] Connecting to http://128.143.199.97:8080/
[08:04:05] - Couldn't send HTTP request to server
[08:04:05] + Could not connect to Work Server (results)
[08:04:05]     (128.143.199.97:8080)
[08:04:05] + Retrying using alternative port
[08:04:05] Connecting to http://128.143.199.97:80/
[08:04:06] - Couldn't send HTTP request to server
[08:04:06] + Could not connect to Work Server
[08:04:06] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[08:04:18] + Attempting to get work packet
[08:04:18] Passkey found
[08:04:18] - Will indicate memory of 1879 MB
[08:04:18] - Connecting to assignment server
[08:04:18] Connecting to http://assign.stanford.edu:8080/
[08:04:19] Posted data.
[08:04:19] Initial: 8F80; - Successful: assigned to (128.143.199.97).
[08:04:19] + News From Folding@Home: Welcome to Folding@Home
[08:04:19] Loaded queue successfully.
[08:04:19] Connecting to http://128.143.199.97:8080/
[08:08:42] - Couldn't send HTTP request to server
[08:08:42] + Could not connect to Work Server (results)
[08:08:42]     (128.143.199.97:80)
[08:08:42] - Error: Could not transmit unit 08 (completed November 16) to work server.
[08:08:42] - 1 failed uploads of this unit.
[08:08:42]   Keeping unit 08 in queue.
[08:08:42] + Sent 0 of 1 completed units to the server
[08:08:42] - Autosend completed
[08:08:55] - Couldn't send HTTP request to server
[08:08:55] + Could not connect to Work Server
[08:08:55] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[08:09:08] + Attempting to get work packet
[08:09:08] Passkey found
[08:09:08] - Will indicate memory of 1879 MB
[08:09:08] - Connecting to assignment server
[08:09:08] Connecting to http://assign.stanford.edu:8080/
[08:09:09] Posted data.
[08:09:09] Initial: 8F80; - Successful: assigned to (128.143.199.96).
[08:09:09] + News From Folding@Home: Welcome to Folding@Home
[08:09:09] Loaded queue successfully.
[08:09:09] Connecting to http://128.143.199.96:8080/
[08:09:10] Posted data.
[08:09:10] Initial: 0000; - Receiving payload (expected size: 1772447)
[08:09:12] - Downloaded at ~865 kB/s
[08:09:12] - Averaged speed for that direction ~684 kB/s
[08:09:12] + Received work.
[08:09:12] + Closed connections
[08:09:12] 
[08:09:12] + Processing work unit
[08:09:12] Core required: FahCore_a3.exe
[08:09:12] Core found.
[08:09:12] Working on queue slot 09 [November 16 08:09:12 UTC]
[08:09:12] + Working ...
[08:09:12] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 4 -checkpoint 15 -forceasm -verbose -lifeline 2061 -version 629'

[08:09:13] 
[08:09:13] *------------------------------*
[08:09:13] Folding@Home Gromacs SMP Core
[08:09:13] Version 2.27 (Dec. 15, 2010)
[08:09:13] 
[08:09:13] Preparing to commence simulation
[08:09:13] - Assembly optimizations manually forced on.
[08:09:13] - Not checking prior termination.
[08:09:13] - Expanded 1771935 -> 1967124 (decompressed 111.0 percent)
[08:09:13] Called DecompressByteArray: compressed_data_size=1771935 data_size=1967124, decompressed_data_size=1967124 diff=0
[08:09:13] - Digital signature verified
[08:09:13] 
[08:09:13] Project: 7137 (Run 0, Clone 14, Gen 366)
[08:09:13] 
[08:09:13] Assembly optimizations on if available.
[08:09:13] Entering M.D.
[08:09:19] Mapping NT from 4 to 4 
[08:09:20] Completed 0 out of 500000 steps  (0%)
[08:17:35] Completed 5000 out of 500000 steps  (1%)
[08:17:42] ***** Got an Activate signal (2)
[08:17:42] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [November 16 08:17:49 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/david/fah
Executable: ./fah6
Arguments: -smp -forceasm -verbosity 9 -config 

[08:17:49] - Ask before connecting: No
[08:17:49] - User name: frostushenon (Team 46590)
[08:17:49] - User ID: 10D47FAC530FB09E
[08:17:49] - Machine ID: 1
[08:17:49] 
[08:17:49] Configuring Folding@Home...


[08:17:53] - Ask before connecting: No
[08:17:53] - User name: frostushenon (Team 46590)
[08:17:53] - User ID: 10D47FAC530FB09E
[08:17:53] - Machine ID: 1
[08:17:53] 
[08:17:53] Loaded queue successfully.
[Nov17:53] 
[08:17:53] - Autosending finished units... [Nov17:53]16 08:17:53 UTC]
[08:17:53] + Processing work unit
[08:17:53] Trying to send all finished work units
[08:17:53] Core required: FahCore_a3.exe
[08:17:53] Project: 7500 (Run 0, Clone 310, Gen 50)
[08:17:53] Core found.


[08:17:53] + Attempting to send results [November 16 08:17:53 UTC]
[08:17:53] - Reading file work/wuresults_08.dat from core
[08:17:53]   (Read 7016611 bytes from disk)
[08:17:53] Connecting to http://128.143.199.97:8080/
[08:17:53] Working on queue slot 09 [November 16 08:17:53 UTC]
[08:17:53] + Working ...
[08:17:53] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 4 -checkpoint 15 -forceasm -verbose -lifeline 2131 -version 629'

[08:17:53] 
[08:17:53] *------------------------------*
[08:17:53] Folding@Home Gromacs SMP Core
[08:17:53] Version 2.27 (Dec. 15, 2010)
[08:17:53] 
[08:17:53] Preparing to commence simulation
[08:17:53] - Assembly optimizations manually forced on.
[08:17:53] - Not checking prior termination.
[08:17:53] - Expanded 1771935 -> 1967124 (decompressed 111.0 percent)
[08:17:53] Called DecompressByteArray: compressed_data_size=1771935 data_size=1967124, decompressed_data_size=1967124 diff=0
[08:17:53] - Digital signature verified
[08:17:53] 
[08:17:53] Project: 7137 (Run 0, Clone 14, Gen 366)
[08:17:53] 
[08:17:53] Assembly optimizations on if available.
[08:17:53] Entering M.D.
[08:17:59] Using Gromacs checkpoints
[08:17:59] Mapping NT from 4 to 4 
[08:18:00] Resuming from checkpoint
[08:18:00] Verified work/wudata_09.log
[08:18:00] Verified work/wudata_09.trr
[08:18:00] Verified work/wudata_09.edr
[08:18:00] Completed 5084 out of 500000 steps  (1%)
[08:22:26] - Couldn't send HTTP request to server
[08:22:26] + Could not connect to Work Server (results)
[08:22:26]     (128.143.199.97:8080)
[08:22:26] + Retrying using alternative port
[08:22:26] Connecting to http://128.143.199.97:80/
[08:26:12] Completed 10000 out of 500000 steps  (2%)
[08:27:00] - Couldn't send HTTP request to server
[08:27:00] + Could not connect to Work Server (results)
[08:27:00]     (128.143.199.97:80)
[08:27:00] - Error: Could not transmit unit 08 (completed November 16) to work server.
[08:27:00] - 2 failed uploads of this unit.


[08:27:00] + Attempting to send results [November 16 08:27:00 UTC]
[08:27:00] - Reading file work/wuresults_08.dat from core
[08:27:00]   (Read 7016611 bytes from disk)
[08:27:00] Connecting to http://130.237.165.141:8080/
[08:27:13] Posted data.
[08:27:13] Initial: 0000; - Uploaded at ~527 kB/s
[08:27:13] - Averaged speed for that direction ~363 kB/s
[08:27:13] + Results successfully sent
[08:27:13] Thank you for your contribution to Folding@Home.
[08:27:13] + Number of Units Completed: 1341

[08:27:13]   Successfully sent unit 08 to Collection server.
[08:27:15] + Sent 1 of 1 completed units to the server
[08:27:15] - Autosend completed

Image
stanmc
Posts: 29
Joined: Mon Dec 03, 2007 1:54 am

Re: 128.143.199.97:8080/ Reject Status [resolving]

Post by stanmc »

Sorry for the delay, but I've been busy upgrading Fedora to F16 and folding (additional 14 since this began).

Code: Select all

	Parallel run - timing based on wallclock.

               NODE (s)   Real (s)      (%)
       Time:  35576.400  35576.400    100.0
                       9h52:56
               (Mnbf/s)   (GFlops)   (ns/day)  (hour/ns)
Performance:    345.542     17.778      4.857      4.941

Thanx for Using GROMACS - Have a Nice Day

[08:45:14] DynamicWrapper: Finished Work Unit: sleep=10000
[08:45:24] 
[08:45:24] Finished Work Unit:
[08:45:24] - Reading up to 5030784 from "work/wudata_01.trr": Read 5030784
[08:45:24] trr file hash check passed.
[08:45:24] - Reading up to 5366256 from "work/wudata_01.xtc": Read 5366256
[08:45:24] xtc file hash check passed.
[08:45:24] edr file hash check passed.
[08:45:24] logfile size: 325233
[08:45:24] Leaving Run
[08:45:28] - Writing 10754677 bytes of core data to disk...
[08:45:30] Done: 10754165 -> 10178004 (compressed to 94.6 percent)
[08:45:30]   ... Done.
[08:48:03] - Shutting down core
[08:48:03] 
[08:48:03] Folding@home Core Shutdown: FINISHED_UNIT
[08:48:17] CoreStatus = 64 (100)
[08:48:17] Unit 1 finished with 92 percent of time to deadline remaining.
[08:48:17] Updated performance fraction: 0.920730
[08:48:17] Sending work to server
[08:48:17] Project: 7504 (Run 5, Clone 216, Gen 9)


[08:48:17] + Attempting to send results [November 16 08:48:17 UTC]
[08:48:17] - Reading file work/wuresults_01.dat from core
[08:48:17]   (Read 10178516 bytes from disk)
[08:48:17] Connecting to http://128.143.199.97:8080/
[08:49:20] - Couldn't send HTTP request to server
[08:49:20] + Could not connect to Work Server (results)
[08:49:20]     (128.143.199.97:8080)
[08:49:20] + Retrying using alternative port
[08:49:20] Connecting to http://128.143.199.97:80/
[08:54:24] - Couldn't send HTTP request to server
[08:54:24] + Could not connect to Work Server (results)
[08:54:24]     (128.143.199.97:80)
[08:54:24] - Error: Could not transmit unit 01 (completed November 16) to work server.
[08:54:24] - 1 failed uploads of this unit.
[08:54:24]   Keeping unit 01 in queue.
[08:54:24] Trying to send all finished work units
[08:54:24] Project: 7504 (Run 5, Clone 216, Gen 9)


[08:54:24] + Attempting to send results [November 16 08:54:24 UTC]
[08:54:24] - Reading file work/wuresults_01.dat from core
[08:54:24]   (Read 10178516 bytes from disk)
[08:54:24] Connecting to http://128.143.199.97:8080/
[08:59:18] - Couldn't send HTTP request to server
[08:59:18] + Could not connect to Work Server (results)
[08:59:18]     (128.143.199.97:8080)
[08:59:18] + Retrying using alternative port
[08:59:18] Connecting to http://128.143.199.97:80/
[09:00:22] - Couldn't send HTTP request to server
[09:00:22] + Could not connect to Work Server (results)
[09:00:22]     (128.143.199.97:80)
[09:00:22] - Error: Could not transmit unit 01 (completed November 16) to work server.
[09:00:22] - 2 failed uploads of this unit.


[09:00:22] + Attempting to send results [November 16 09:00:22 UTC]
[09:00:22] - Reading file work/wuresults_01.dat from core
[09:00:22]   (Read 10178516 bytes from disk)
[09:00:22] Connecting to http://130.237.165.141:8080/
[09:03:31] Posted data.
[09:03:31] Initial: 0000; - Uploaded at ~52 kB/s
[09:03:31] - Averaged speed for that direction ~52 kB/s
[09:03:31] + Results successfully sent
[09:03:31] Thank you for your contribution to Folding@Home.
[09:03:31] + Number of Units Completed: 1457

[09:03:31]   Successfully sent unit 01 to Collection server.
[09:04:46] + Sent 1 of 1 completed units to the server
[09:04:46] + -oneunit flag given and have now finished a unit. Exiting.- Preparing to get new work unit...
[09:04:46] Cleaning up work directory
[09:04:46] ***** Got a SIGTERM signal (15)
[09:04:46] Killing all core threads
[09:04:46] + Attempting to get work packet

Folding@Home Client Shutdown.
[09:04:46] Passkey found
[09:04:46] - Will indicate memory of 1990 MB
[09:04:46] - Connecting to assignment server
[09:04:46] Connecting to http://assign.stanford.edu:8080/
As you can see it was finished uploading @ 09:03:31 UTC on 16 Nov. to http://130.237.165.141:8080/
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: 128.143.199.97:8080/ Reject Status [resolving]

Post by sortofageek »

Thanks, stanmc. It appears the Collection Server received your WU, Project: 7504 (Run 5, Clone 216, Gen 9), as well. Like the three shunter listed there is still no sign of it registering with the Work Server or being credited. At least there is no record for your WU credited to stanmc.
Pick2
Posts: 85
Joined: Fri Feb 13, 2009 12:38 pm
Hardware configuration: Linux & CPUs
Location: USA

Re: 128.143.199.97:8080/ Reject Status [Some WUs MIA]

Post by Pick2 »

This server is not accepting WU. I've got 5 WU waiting to send. The WU from another server are returning OK , just this one server is giving Me problems.
net load is 1009 ... WUs RCV ( WUs received ) is 0 (zero)
ThunderRd
Posts: 78
Joined: Sun Dec 02, 2007 5:30 am
Location: Nong Khai, Thailand

Re: 128.143.199.97:8080/ Reject Status [Some WUs MIA]

Post by ThunderRd »

Yeah, this server has quit again along with 130.237.165.141. It's the same situation as the outset of this thread. My log output is identical to the one I posted last week.
ThunderRd
Posts: 78
Joined: Sun Dec 02, 2007 5:30 am
Location: Nong Khai, Thailand

Re: 128.143.199.97:8080/ Reject Status [Some WUs MIA]

Post by ThunderRd »

Server in question is showing 'reject' status at this time.
Ordinant
Posts: 4
Joined: Wed Oct 19, 2011 3:01 am

Re: 128.143.199.97:8080/ Reject Status [Some WUs MIA]

Post by Ordinant »

Server 128.143.199.97 is refusing connections again. I've got a 7504 that has been trying to report results for the last five or six hours. The same donor PC has already run and reported another complete 6941 while continuing to retry reporting the 7504.

Is it time to replace some hardware in 128.143.199.97 to get it stable again? Don't be afraid to ask donors for donations of specific hardware parts: you'll find us to be a generous lot, but we need to know exactly what parts to send and where.
alancabler
Posts: 170
Joined: Sun Dec 02, 2007 12:45 pm
Location: Oklahoma

Re: 128.143.199.97:8080/ Reject Status [Some WUs MIA]

Post by alancabler »

This is one of Professor Kasson's servers, so it is probably located cross country at UVa and isn't being affected by reported problems with Stanford Med School network..
Facts are not truth. Facts are merely facets of the shining diamond of truth.
DocJonz
Posts: 244
Joined: Thu Dec 06, 2007 6:31 pm
Hardware configuration: Folding with: 4x RTX 4070Ti, 1x RTX 4080 Super
Location: United Kingdom
Contact:

Re: 128.143.199.97:8080/ Reject Status [Some WUs MIA]

Post by DocJonz »

ThunderRd wrote:Yeah, this server has quit again along with 130.237.165.141. It's the same situation as the outset of this thread. My log output is identical to the one I posted last week.
I have exactly the same problem with both servers mentioned by ThunderRd.
Folding Stats (HFM.NET): DocJonz Folding Farm Stats
hinebaud
Posts: 4
Joined: Wed Dec 15, 2010 4:32 pm

Re: 128.143.199.97:8080/ Reject Status [Some WUs MIA]

Post by hinebaud »

I am having problems with this sever again too. I have two WU's that are waiting to upload to this server. I will post my log when I get home from work if the server is still having issues.
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: 128.143.199.97/ Reject Status [Some WUs MIA]

Post by sortofageek »

Server binary was restarted this morning. Hopefully those of you having trouble are beginning to see resolution by now.
codysluder
Posts: 1024
Joined: Sun Dec 02, 2007 12:43 pm

Re: 128.143.199.97/ Reject Status [Some WUs MIA]

Post by codysluder »

It's encouraging to see somebody is working on the issues. I hope that they have figured out a permanent fix.
DocJonz
Posts: 244
Joined: Thu Dec 06, 2007 6:31 pm
Hardware configuration: Folding with: 4x RTX 4070Ti, 1x RTX 4080 Super
Location: United Kingdom
Contact:

Re: 128.143.199.97/ Reject Status [Some WUs MIA]

Post by DocJonz »

sortofageek wrote:Server binary was restarted this morning. Hopefully those of you having trouble are beginning to see resolution by now.
Yep. WU's now uploaded.
Folding Stats (HFM.NET): DocJonz Folding Farm Stats
HaloJones
Posts: 906
Joined: Thu Jul 24, 2008 10:16 am

Re: 128.143.199.97/ Reject Status [Some WUs MIA]

Post by HaloJones »

I know this is a medical project not a mission-critical app but it is endlessly frustrating to be told how urgently the wu need to be returned and then have the work done but nowhere to send it. There has to be a better solution to having single binaries able to accept wu instead of there always being a backup collection box.
single 1070

Image
Post Reply