171.64.65.56 ???

Moderators: Site Moderators, FAHC Science Team

bollix47
Posts: 2957
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: 171.64.65.56 ???

Post by bollix47 »

It may indeed be a good idea but at 250+ it's not accepting this finished WU. :roll:

Code: Select all

[17:30:18] Sending work to server
[17:30:18] Project: 6701 (Run 111, Clone 37, Gen 8)


[17:30:18] + Attempting to send results [October 12 17:30:18 UTC]
[17:30:18] - Reading file work/wuresults_09.dat from core
[17:30:18]   (Read 43642788 bytes from disk)
[17:30:18] Connecting to http://171.64.65.56:8080/
[17:30:19] - Couldn't send HTTP request to server
[17:30:19]   (Got status 503)
[17:30:19] + Could not connect to Work Server (results)
[17:30:19]     (171.64.65.56:8080)
[17:30:19] + Retrying using alternative port
[17:30:19] Connecting to http://171.64.65.56:80/
[17:30:19] - Couldn't send HTTP request to server
[17:30:19]   (Got status 503)
[17:30:19] + Could not connect to Work Server (results)
[17:30:19]     (171.64.65.56:80)
[17:30:19] - Error: Could not transmit unit 09 (completed October 12) to work server.
[17:30:19] - 1 failed uploads of this unit.
[17:30:19]   Keeping unit 09 in queue.
[17:30:19] Trying to send all finished work units
[17:30:19] Project: 6701 (Run 111, Clone 37, Gen 8)


[17:30:19] + Attempting to send results [October 12 17:30:19 UTC]
[17:30:19] - Reading file work/wuresults_09.dat from core
[17:30:19]   (Read 43642788 bytes from disk)
[17:30:19] Connecting to http://171.64.65.56:8080/
[17:30:19] - Couldn't send HTTP request to server
[17:30:19]   (Got status 503)
[17:30:19] + Could not connect to Work Server (results)
[17:30:19]     (171.64.65.56:8080)
[17:30:19] + Retrying using alternative port
[17:30:19] Connecting to http://171.64.65.56:80/
[17:30:20] - Couldn't send HTTP request to server
[17:30:20]   (Got status 503)
[17:30:20] + Could not connect to Work Server (results)
[17:30:20]     (171.64.65.56:80)
[17:30:20] - Error: Could not transmit unit 09 (completed October 12) to work server.
[17:30:20] - 2 failed uploads of this unit.


[17:30:20] + Attempting to send results [October 12 17:30:20 UTC]
[17:30:20] - Reading file work/wuresults_09.dat from core
[17:30:20]   (Read 43642788 bytes from disk)
[17:30:20] Connecting to http://171.67.108.25:8080/
[17:30:37] Posted data.
[17:30:37] Initial: 0000; + Could not connect to Work Server (results)
[17:30:37]     (171.67.108.25:8080)
[17:30:37] + Retrying using alternative port
[17:30:37] Connecting to http://171.67.108.25:80/
[17:30:55] Posted data.
[17:30:55] Initial: 0000; + Could not connect to Work Server (results)
[17:30:55]     (171.67.108.25:80)
[17:30:55]   Could not transmit unit 09 to Collection server; keeping in queue.
[17:30:55] + Sent 0 of 1 completed units to the server
[17:30:55] - Preparing to get new work unit...
[17:30:55] Cleaning up work directory
[17:30:55] + Attempting to get work packet
[17:30:55] Passkey found
[17:30:55] - Will indicate memory of 5974 MB
[17:30:55] - Connecting to assignment server
[17:30:55] Connecting to http://assign.stanford.edu:8080/
[17:30:56] Posted data.
[17:30:56] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[17:30:56] + News From Folding@Home: Welcome to Folding@Home
[17:30:56] Loaded queue successfully.
[17:30:56] Connecting to http://171.64.65.54:8080/
[17:30:57] Posted data.
[17:30:57] Initial: 0000; - Receiving payload (expected size: 1764810)
[17:31:01] - Downloaded at ~430 kB/s
[17:31:01] - Averaged speed for that direction ~353 kB/s
[17:31:01] + Received work.
[17:31:01] Trying to send all finished work units
[17:31:01] Project: 6701 (Run 111, Clone 37, Gen 8)


[17:31:01] + Attempting to send results [October 12 17:31:01 UTC]
[17:31:01] - Reading file work/wuresults_09.dat from core
[17:31:01]   (Read 43642788 bytes from disk)
[17:31:01] Connecting to http://171.64.65.56:8080/
[17:31:01] - Couldn't send HTTP request to server
[17:31:01]   (Got status 503)
[17:31:01] + Could not connect to Work Server (results)
[17:31:01]     (171.64.65.56:8080)
[17:31:01] + Retrying using alternative port
[17:31:01] Connecting to http://171.64.65.56:80/
[17:31:01] - Couldn't send HTTP request to server
[17:31:01]   (Got status 503)
[17:31:01] + Could not connect to Work Server (results)
[17:31:01]     (171.64.65.56:80)
[17:31:01] - Error: Could not transmit unit 09 (completed October 12) to work server.
[17:31:01] - 3 failed uploads of this unit.


[17:31:01] + Attempting to send results [October 12 17:31:01 UTC]
[17:31:01] - Reading file work/wuresults_09.dat from core
[17:31:01]   (Read 43642788 bytes from disk)
[17:31:01] Connecting to http://171.67.108.25:8080/
[17:31:19] Posted data.
[17:31:19] Initial: 0000; + Could not connect to Work Server (results)
[17:31:19]     (171.67.108.25:8080)
[17:31:19] + Retrying using alternative port
[17:31:19] Connecting to http://171.67.108.25:80/
[17:31:39] Posted data.
[17:31:39] Initial: 0000; + Could not connect to Work Server (results)
[17:31:39]     (171.67.108.25:80)
[17:31:39]   Could not transmit unit 09 to Collection server; keeping in queue.
[17:31:39] + Sent 0 of 1 completed units to the server
[17:31:39] + Closed connections
[17:31:39] 
Image
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: 171.64.65.56 ???

Post by sortofageek »

They did give it a kick last time net load was up without anyone mentioning it here. I see what you're saying, it's up again and I sent a flag.
sco01
Posts: 79
Joined: Sun Mar 21, 2010 8:52 pm
Hardware configuration: Core i7 3930K(C2)@4,2 (1.30v)
Swiftech Apogee Drive II + MCR-H220 Radiator
Asus P9X79
4*4Gb SEC 1600@1866 1.5v
GeForce GTX780ti ref (nztx G10+zalman lq315)
Creative X-Fi Titanium Fatal1ty
Lite-On iHAS124-34
HDD- WD3000GLFS + 2*Hitaсhi HDS723030BLE640 + 2*HDT721010SLA360
case-Corsair Obsidian 700D
PSU - Seasonic Platinum 860W (SS-860XP2)

2) Xeon E5645@4Ghz (1,34v)
ASUS P6T
Thermalright Silver Arrow
Corsair TR3X6G1600C7 (3x2048Mb, 7-7-7-20 1,62v)
GeForce GTX780 ref (nztx G10+corsair H75)
Zotac GTX980 AMP! Edition (ZT-90204-10P)
Hitachi 320Gb HTS543232A7A384
case - Chieftec LBX-03B Dremel edition :-)
PSU - Zalman ZM-850HP+ (Enhance silver)

APC SUA1500RMI2U
APC SUA1500RMI2U

Re: 171.64.65.56 ???

Post by sco01 »

again....
19:03:59] + Attempting to send results [October 12 19:03:59 UTC]
[19:03:59] - Reading file work/wuresults_09.dat from core
[19:03:59] (Read 43659500 bytes from disk)
[19:03:59] Connecting to http://171.64.65.56:8080/
[19:04:00] - Couldn't send HTTP request to server
[19:04:00] (Got status 503)
[19:04:00] + Could not connect to Work Server (results)
[19:04:00] (171.64.65.56:8080)
[19:04:00] + Retrying using alternative port
[19:04:00] Connecting to http://171.64.65.56:80/
[19:04:00] - Couldn't send HTTP request to server
[19:04:00] (Got status 503)
[19:04:00] + Could not connect to Work Server (results)
[19:04:00] (171.64.65.56:80)
[19:04:00] - Error: Could not transmit unit 09 (completed October 12) to work server.
[19:04:00] - 8 failed uploads of this unit.
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: 171.64.65.56 ???

Post by sortofageek »

It was restarted earlier and netload is only 42 now. Did you get a WU?
bollix47
Posts: 2957
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: 171.64.65.56 ???

Post by bollix47 »

The WU above has gone home :D

Thanks for bringing the situation to their attention.
Image
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 171.64.65.56 ???

Post by bruce »

It's time to reexamine your reasons for running SMP.

I have a couple of slower duals which normally earn a small bonus. I've switched them to pairs of uniprocessor clients until this situation is resolved. HMD says that SMP has been giving me slightly higher PPD than Uni+Uni, but by the time I factor in the time that SMP spends waiting for a new assignment (which HFM doesn't consider) I believe that my total PPD may have gone up. In any case, there will be fewer clients competing for the attention of this server.

Consider whether this temporarily makes sense for you, too.
BrokenWolf
Posts: 126
Joined: Sat Aug 02, 2008 3:08 am

Re: 171.64.65.56 ???

Post by BrokenWolf »

Seems this server is still having issues today. The system was able to pull down a new WU but unable to send the completed WU.

Code: Select all

[21:02:58]
[21:02:59] Loaded queue successfully.
[21:02:59] Attempting to return result(s) to server...
[21:02:59] Trying to send all finished work units
[21:02:59] Project: 6701 (Run 43, Clone 11, Gen 74)


[21:02:59] + Attempting to send results [October 13 21:02:59 UTC]
[21:02:59] - Reading file work/wuresults_01.dat from core
[21:02:59]   (Read 43610251 bytes from disk)
[21:02:59] Connecting to http://171.64.65.56:8080/
[21:03:26] - Couldn't send HTTP request to server
[21:03:26]   (Got status 502)
[21:03:26] + Could not connect to Work Server (results)
[21:03:26]     (171.64.65.56:8080)
[21:03:26] + Retrying using alternative port
[21:03:26] Connecting to http://171.64.65.56:80/
[21:03:33] - Couldn't send HTTP request to server
[21:03:33]   (Got status 502)
[21:03:33] + Could not connect to Work Server (results)
[21:03:33]     (171.64.65.56:80)
[21:03:33] - Error: Could not transmit unit 01 (completed October 13) to work server.
[21:03:33] - 4 failed uploads of this unit.


[21:03:33] + Attempting to send results [October 13 21:03:33 UTC]
[21:03:33] - Reading file work/wuresults_01.dat from core
[21:03:33]   (Read 43610251 bytes from disk)
[21:03:33] Connecting to http://171.67.108.25:8080/
[21:03:47] - Couldn't send HTTP request to server
[21:03:47]   (Got status 502)
[21:03:47] + Could not connect to Work Server (results)
[21:03:47]     (171.67.108.25:8080)
[21:03:47] + Retrying using alternative port
[21:03:47] Connecting to http://171.67.108.25:80/
[21:04:00] - Couldn't send HTTP request to server
[21:04:00]   (Got status 502)
[21:04:00] + Could not connect to Work Server (results)
[21:04:00]     (171.67.108.25:80)
[21:04:00]   Could not transmit unit 01 to Collection server; keeping in queue.
[21:04:00] + Sent 0 of 1 completed units to the server
[21:04:00] - Failed to send all units to server
[21:04:00] ***** Got a SIGTERM signal (2)
[21:04:00] Killing all core threads
[21:04:00] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.
Image
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: 171.64.65.56 ???

Post by sortofageek »

Waving a little lavender handkerchief, my favorite. Hope they see me. :)
bollix47
Posts: 2957
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: 171.64.65.56 ???

Post by bollix47 »

Could you give that handkerchief another little wave please. :lol:
Image
314159
Posts: 232
Joined: Sun Dec 02, 2007 2:46 am
Location: http://www.teammacosx.org/

Re: 171.64.65.56 ???

Post by 314159 »

Server in REJECT MODE. :?

PLEASE FIX.

THANK YOU! :!:
John (from the central part of the Commonwealth of Virginia, U.S.A.)

A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
jimerickson
Posts: 533
Joined: Tue May 27, 2008 11:56 pm
Hardware configuration: Parts:
Asus H370 Mining Master motherboard (X2)
Patriot Viper DDR4 memory 16gb stick (X4)
Nvidia GeForce GTX 1080 gpu (X16)
Intel Core i7 8700 cpu (X2)
Silverstone 1000 watt psu (X4)
Veddha 8 gpu miner case (X2)
Thermaltake hsf (X2)
Ubit riser card (X16)
Location: ames, iowa

Re: 171.64.65.56 ???

Post by jimerickson »

i am sad.

Code: Select all

[22:31:41] + Attempting to send results [October 25 22:31:41 UTC]
[22:59:33] - Couldn't send HTTP request to server
[22:59:33] + Could not connect to Work Server (results)
[22:59:33]     (171.64.65.56:8080)
[22:59:33] + Retrying using alternative port
[22:59:33] - Couldn't send HTTP request to server
[22:59:33] + Could not connect to Work Server (results)
[22:59:33]     (171.64.65.56:80)
[22:59:33] - Error: Could not transmit unit 01 (completed October 25) to work server.


[22:59:33] + Attempting to send results [October 25 22:59:33 UTC]
[23:02:34] - Couldn't send HTTP request to server
[23:02:34] + Could not connect to Work Server (results)
[23:02:34]     (171.67.108.25:8080)
[23:02:34] + Retrying using alternative port
[23:04:15] - Couldn't send HTTP request to server
[23:04:15] + Could not connect to Work Server (results)
[23:04:15]     (171.67.108.25:80)
[23:04:15]   Could not transmit unit 01 to Collection server; keeping in queue.
[23:04:15] + Closed connections
314159
Posts: 232
Joined: Sun Dec 02, 2007 2:46 am
Location: http://www.teammacosx.org/

Re: 171.64.65.56 ???

Post by 314159 »

Did you get a successful send?
I have one that appears to be trying to send but it is taking forever, 15 minutes so far vs. the normal 2+ minutes.
It is NOT a local problem.
Another is queued. (see yah in 6 hours) :)
5 more will complete in the next 6-7 hours.

Boo! :)

How the heck do I get these Quads on xx.54?
Are there no Linux WUs available on that other server?
John (from the central part of the Commonwealth of Virginia, U.S.A.)

A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
bollix47
Posts: 2957
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: 171.64.65.56 ???

Post by bollix47 »

Did you get a successful send?
Not yet ... like yours it's taking a very long time ... up around 16 minutes versus the normal of around 6. :?

Net Load quickly returned to around 230 :!:

It finally finished after 33 minutes ... 5 times normal.
Image
314159
Posts: 232
Joined: Sun Dec 02, 2007 2:46 am
Location: http://www.teammacosx.org/

Re: 171.64.65.56 ???

Post by 314159 »

Thanks for the info. I managed to send WU #2 up at approximately normal speed. :)

Any idea what the story is on the other SMP server (xx.54)?

Is anyone getting assignements from it? (Linux)

Looking at serverstats, the "WEIGHT" is either outdated/not updated or something else appears wrong. :(
John (from the central part of the Commonwealth of Virginia, U.S.A.)

A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
bollix47
Posts: 2957
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: 171.64.65.56 ???

Post by bollix47 »

Speeds have returned to 'normal' here too and one of my Linux setups got it's next WU from .54 so it appears to be working. :?

Most of my systems are running P670x but not all and the mix seems to change every day or two.
Image
Post Reply