171.67.108.20
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 244
- Joined: Thu Dec 06, 2007 6:31 pm
- Hardware configuration: Folding with: 4x RTX 4070Ti, 1x RTX 4080 Super
- Location: United Kingdom
- Contact:
Re: 171.67.108.20
I have 7 GPU3 clients down waiting for work off this server - 171.67.108.20 - server status says its 'full' but 'accepting' .... ?
Folding Stats (HFM.NET): DocJonz Folding Farm Stats
Re: 171.67.108.20
According to serverstat, this server started assigning work around 09:55:10 PDT -- 2½ hours ago.
A healthy server should always be "Accepting" Connections. You're thinking of a Status of "accept" which, unlike "full" means it has been explicitly configured NOT to issue WUs.
A healthy server should always be "Accepting" Connections. You're thinking of a Status of "accept" which, unlike "full" means it has been explicitly configured NOT to issue WUs.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 131
- Joined: Sun Dec 02, 2007 6:29 am
- Hardware configuration: 1. C2Q 8200@2880 / W7Pro64 / SMP2 / 2 GPU - GTS250/GTS450
2. C2D 6300@3600 / XPsp3 / SMP2 / 1 GPU - GT240 - Location: Florida
Re: 171.67.108.20
Well the AS is getting slammed, the 171.67.108.20 server has a net load of zero. So I would venture a guess that
the server page is useless at this time. Maybe they are doing an upgrade, and it got stuck in a loop.
the server page is useless at this time. Maybe they are doing an upgrade, and it got stuck in a loop.
Re: 171.67.108.20
WUs AVAIL and WUs to go keep decreasing. Something is getting issued.
11:15:11 PDT 88398 88398
11:30:10 PDT 87829 87829
11:45:11 PDT 87276 87276
12:00:10 PDT 86842 86842
12:15:11 PDT 86423 86423
Also note the non-blank value in "% Ass G"
Have you added/removed -advmethods?
Is this a problem for Fermi or for G80 hardware or both?
11:15:11 PDT 88398 88398
11:30:10 PDT 87829 87829
11:45:11 PDT 87276 87276
12:00:10 PDT 86842 86842
12:15:11 PDT 86423 86423
Also note the non-blank value in "% Ass G"
Have you added/removed -advmethods?
Is this a problem for Fermi or for G80 hardware or both?
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 533
- Joined: Tue May 27, 2008 11:56 pm
- Hardware configuration: Parts:
Asus H370 Mining Master motherboard (X2)
Patriot Viper DDR4 memory 16gb stick (X4)
Nvidia GeForce GTX 1080 gpu (X16)
Intel Core i7 8700 cpu (X2)
Silverstone 1000 watt psu (X4)
Veddha 8 gpu miner case (X2)
Thermaltake hsf (X2)
Ubit riser card (X16) - Location: ames, iowa
Re: 171.67.108.20
bruce:
its a fermi problem here. i have no g80 hardware.
its a fermi problem here. i have no g80 hardware.
-
- Posts: 131
- Joined: Sun Dec 02, 2007 6:29 am
- Hardware configuration: 1. C2Q 8200@2880 / W7Pro64 / SMP2 / 2 GPU - GTS250/GTS450
2. C2D 6300@3600 / XPsp3 / SMP2 / 1 GPU - GT240 - Location: Florida
Re: 171.67.108.20
It also was showing a net load of ZERO. No net load, no workie. Now up to .01. Look at the AS, 300+ is not good.
I have not changed flags. No flag for GPU3, adv for GPU2. Has work like a charm for days.
I have not changed flags. No flag for GPU3, adv for GPU2. Has work like a charm for days.
-
- Posts: 157
- Joined: Fri Feb 01, 2008 6:41 pm
Re: 171.67.108.20
I guess serverstat doesn't make the distinction between Fermi and other units. My GPU3 Fermi has not received a single WU since 16:22 UTC, 9:22am PDT. That's over four hours at this time. Someone needs to look into and let us know that they see the problem and are / will work on it. From the reports of others, this is a widespread WU stoppage for GTX 470 and GTX 480 starting at 9:22 am or earlier and it still persists to this second. I just chacked again. It's not working.bruce wrote:According to serverstat, this server started assigning work around 09:55:10 PDT -- 2½ hours ago.
A healthy server should always be "Accepting" Connections. You're thinking of a Status of "accept" which, unlike "full" means it has been explicitly configured NOT to issue WUs.
Whatever got assigend at 09:55:10 PDT, likely wasn't to a GTX 470 or GTX 480, and if it was, many GTX 470 and GTX 480 clients still are not getting work hours later...
Last edited by ElectricVehicle on Thu Jun 10, 2010 8:24 pm, edited 2 times in total.
Fold On! (with 100% Renewable, 0 Carbon electricity) ElectricVehicle EV1, RAV4 EV, LEAF, Bolt EV, Volt, M3, s4 Simulator
Re: 171.67.108.20
Yep my GPU3 is out of work too & can't get more.
Teddy
Teddy
Re: 171.67.108.20
I have my 480s resting during the daylight hours so I'll turn them back on when I get home tonight and report on work unit status.
Re: 171.67.108.20
It looks like they're working on the server, it doesn't hold a single WU right now....
Edit: Got one Wu now.
Edit: Got one Wu now.
-
- Posts: 157
- Joined: Fri Feb 01, 2008 6:41 pm
Re: 171.67.108.20
I got a WU (GPU3 GTX 480) also. yeah
Last edited by ElectricVehicle on Fri Jun 11, 2010 12:16 am, edited 1 time in total.
Fold On! (with 100% Renewable, 0 Carbon electricity) ElectricVehicle EV1, RAV4 EV, LEAF, Bolt EV, Volt, M3, s4 Simulator
-
- Posts: 94
- Joined: Thu Nov 13, 2008 4:18 pm
- Hardware configuration: q6600 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon x2 6000+ @ 3.0Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
5600X2 @ 3.19Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
E5200 @ 3.7Ghz ubuntu 8.04 smp2 + asus 9600GT silent gpu2 in wine wrapper
E5200 @ 3.65Ghz ubuntu 8.04 smp2 + asus 9600GSO gpu2 in wine wrapper
E6550 vmware ubuntu 8.4.1
q8400 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon II 620 @ 2.6 Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2 - Location: Calgary, Canada
Re: 171.67.108.20
all 5 GPU3 client is working (all 5 are g80 cards).
True only one got openmm project but i guess the core 1.31 is better than nothing.
I haven't change any of the -advmethods parameters, and have not restarted the clients, they picked up works on their own
True only one got openmm project but i guess the core 1.31 is better than nothing.
I haven't change any of the -advmethods parameters, and have not restarted the clients, they picked up works on their own
-
- Posts: 533
- Joined: Tue May 27, 2008 11:56 pm
- Hardware configuration: Parts:
Asus H370 Mining Master motherboard (X2)
Patriot Viper DDR4 memory 16gb stick (X4)
Nvidia GeForce GTX 1080 gpu (X16)
Intel Core i7 8700 cpu (X2)
Silverstone 1000 watt psu (X4)
Veddha 8 gpu miner case (X2)
Thermaltake hsf (X2)
Ubit riser card (X16) - Location: ames, iowa
Re: 171.67.108.20
was at work for awhile but my gtx480 has a work unit now.