Project: 4615 (Run 23, Clone 3, Gen 43) Early Unit End

[John Deas]

Early Unit End on p4615 - never got started
This was two days ago - sorry for delay in reporting.

Client: Windows CPU Console Edition
Client Version: 6.20
Core Type: Folding@Home PMD Core
Core Version: 1.03 (September 7, 2005)
Operating System: Windows XP Home v5.1.2600 SP2
CPU: AMD Sempron 3400+ x86 Family 15 Model 47 Stepping 2
Overclocked: No

Code: Select all

[07:53:13] - Preparing to get new work unit...
[07:53:13] + Attempting to get work packet
[07:53:13] - Will indicate memory of 446 MB
[07:53:13] - Detect CPU. Vendor: AuthenticAMD, Family: 15, Model: 15, Stepping: 2
[07:53:13] - Connecting to assignment server
[07:53:13] Connecting to http://assign.stanford.edu:8080/
[07:53:14] Posted data.
[07:53:14] Initial: E6A9; - Successful: assigned to (169.230.26.30).
[07:53:14] + News From Folding@Home: Welcome to Folding@Home
[07:53:14] Loaded queue successfully.
[07:53:14] Connecting to http://169.230.26.30:8080/
[07:53:15] Posted data.
[07:53:15] Initial: 0000; - Receiving payload (expected size: 17102)
[07:53:15] Conversation time very short, giving reduced weight in bandwidth avg
[07:53:15] - Downloaded at ~33 kB/s
[07:53:15] - Averaged speed for that direction ~21 kB/s
[07:53:15] + Received work.
[07:53:15] Trying to send all finished work units
[07:53:15] + No unsent completed units remaining.
[07:53:15] + Closed connections
[07:53:15] 
[07:53:15] + Processing work unit
[07:53:15] Core required: FahCore_82.exe
[07:53:15] Core found.
[07:53:15] Working on queue slot 05 [April 28 07:53:15 UTC]
[07:53:15] + Working ...
[07:53:15] - Calling '.\FahCore_82.exe -dir work/ -suffix 05 -checkpoint 15 -service -verbose -lifeline 1748 -version 620'

[07:53:16] 
[07:53:16] *------------------------------*
[07:53:16] Folding@Home PMD Core
[07:53:16] Version 1.03 (September 7, 2005)
[07:53:16] 
[07:53:16] Preparing to commence simulation
[07:53:16] - Looking at optimizations...
[07:53:16] - Created dyn
[07:53:16] - Files status OK
[07:53:16] - Expanded 16590 -> 112789 (decompressed 679.8 percent)
[07:53:16] 
[07:53:16] Project: 4615 (Run 23, Clone 3, Gen 43)
[07:53:16] 
[07:53:16] Assembly optimizations on if available.
[07:53:16] Entering M.D.
[07:53:22] Going to send back what have done.
[07:53:22] logfile size: 5649
[07:53:22] - Writing 6169 bytes of core data to disk...
[07:53:22]   ... Done.
[07:53:22] 
[07:53:22] Folding@home Core Shutdown: EARLY_UNIT_END
[07:53:26] CoreStatus = 72 (114)
[07:53:26] Sending work to server
[07:53:26] Project: 4615 (Run 23, Clone 3, Gen 43)


[07:53:26] + Attempting to send results [April 28 07:53:26 UTC]
[07:53:26] - Reading file work/wuresults_05.dat from core
[07:53:26]   (Read 6169 bytes from disk)
[07:53:26] Connecting to http://169.230.26.30:8080/
[07:53:27] Posted data.
[07:53:27] Initial: 0000; - Uploaded at ~7 kB/s
[07:53:27] - Averaged speed for that direction ~26 kB/s
[07:53:27] + Results successfully sent
[07:53:27] Thank you for your contribution to Folding@Home.

Regards,
John Deas

[susato]

Hi John, thanks for reporting this unit.
You are one of four people whose machines reported an early unit end on this WU.
However, someone else probably has it now. The four of you were all assigned it between midnight and 1 am on 4/28. There have been no further reports about it since then. So either someone is working it successfully (so far) on another machine, or they downloaded it and shut their machine off before it reached the failure point, or the owner noticed the problem and pulled the unit.

Please bump the thread in a couple of days so one of the mods can check it again. Thanks!

[toTOW]

This is a quite common issue with p46xx ... some will immediately die.

There's usually no need to wait for more reports when you see this kind of immediate EUE on p46xx, they'll all be similar.

I've marked the WU as bad (it will be probably attempted a couple of times more before someone handles the bad WU queue).