Project: 2620 Run 19 Clone 56 Gen 6

[johnph77]

[05:41:11] - Server does not have record of this unit. Will try again later.

[bruce]

Welcome to the folding forum, johnph77

For more information about this message, see the Wiki. It's nothing to worry about.

Which Work Server and which Collection Server are involved? (The data should be in FAHlog.txt)

[johnph77]

Work Server - 171.64.64.65:8080.

Collection Server - 171.64.122.76:8080

Thank you for your quick response. F@H computer is not on line at present - will try again to send later today. Good to know nothinng is wrong.

[brityank]

Work Server - 171.64.64.65:8080.

Collection Server - 171.64.122.76:8080

Thank you for your quick response. F@H computer is not on line at present - will try again to send later today. Good to know nothinng is wrong.

Hi johnph77,

I've had several of those type of "failures" -- but they aren't really failing. If you look in your log, it will show something like this:

[16:27:01] + Attempting to send results
[16:27:01] - Reading file work/wuresults_04.dat from core
[16:27:01] (Read 6745721 bytes from disk)
[16:27:01] Connecting to http://171.64.65.65:8080/
[16:27:02] - Couldn't send HTTP request to server
[16:27:02] + Could not connect to Work Server (results)
[16:27:02] (171.64.65.65:8080)
[16:27:02] - Error: Could not transmit unit 04 (completed January 8) to work server.
[16:27:02] - 4 failed uploads of this unit.


[16:27:02] + Attempting to send results
[16:27:02] - Reading file work/wuresults_04.dat from core
[16:27:02] (Read 6745721 bytes from disk)
[16:27:02] Connecting to http://171.65.103.100:8080/
[16:29:27] Posted data.
[16:29:27] Initial: 0000; - Uploaded at ~45 kB/s
[16:29:27] - Averaged speed for that direction ~45 kB/s
[16:29:27] - Server does not have record of this unit. Will try again later.
[16:29:27] Could not transmit unit 04 to Collection server; keeping in queue.
[16:29:27] + Sent 0 of 1 completed units to the server
[16:29:27] - Autosend completed

The original Work Server xx.65 Server is busy, and refusing my connect. (xx.65 above)
The Network's Collection Server accepted the connect, but it has no record of that specific WU, and so it rejects the upload, leaving it in my queue. (xx.100 above)
Once the load drops on the WU Server you'll connect and send it.

[20:47:56] Connecting to http://171.64.65.65:8080/
[20:50:18] Initial: 0000; - Uploaded at ~45 kB/s
[20:50:21] - Averaged speed for that direction ~45 kB/s
[20:50:21] + Results successfully sent
[20:50:21] Thank you for your contribution to Folding@Home.

If you go to http://fah-web.stanford.edu/serverstat.html you can check the Server Status of the Stanford farm. The explaination of the columns is at the bottom; Net Load is the main lockout point -- too many connects gives the refusal.

Cheers.

[johnph77]

[16:03:50] Results successfully sent.

brityank -

This was my first experience with this message. Thank you for the information.