Page 1 of 2
171.67.108.25 - cannot upload work unit
Posted: Thu Nov 06, 2008 9:02 pm
by 3dski
Code: Select all
[20:00:10] + Attempting to send results [November 6 20:00:10 UTC]
[20:00:10] - Reading file work/wuresults_07.dat from core
[20:00:16] (Read 150995480 bytes from disk)
[20:00:16] Connecting to http://171.67.108.25:8080/
[20:00:16] - Couldn't send HTTP request to server
[20:00:16] + Could not connect to Work Server (results)
[20:00:16] (171.67.108.25:8080)
[20:00:16] + Retrying using alternative port
[20:00:16] Connecting to http://171.67.108.25:80/
[20:00:17] - Couldn't send HTTP request to server
[20:00:17] + Could not connect to Work Server (results)
[20:00:17] (171.67.108.25:80)
[20:00:17] Could not transmit unit 07 to Collection server; keeping in queue.
[20:00:17] Project: 2665 (Run 2, Clone 951, Gen 60)
[20:00:17] + Attempting to send results [November 6 20:00:17 UTC]
[20:00:17] - Reading file work/wuresults_09.dat from core
[20:00:26] (Read 262144000 bytes from disk)
[20:00:26] Connecting to http://171.64.65.64:8080/
[20:00:26] - Couldn't send HTTP request to server
[20:00:26] + Could not connect to Work Server (results)
[20:00:26] (171.64.65.64:8080)
[20:00:26] + Retrying using alternative port
[20:00:26] Connecting to http://171.64.65.64:80/
[20:00:26] - Couldn't send HTTP request to server
[20:00:26] + Could not connect to Work Server (results)
[20:00:26] (171.64.65.64:80)
[20:00:26] - Error: Could not transmit unit 09 (completed November 5) to work server.
[20:00:26] - 39 failed uploads of this unit.
I have a similar situation in a post just prior to this for server 171.64.65.64. I have had no issues getting work units.
Re: 171.67.108.25 - cannot upload work unit
Posted: Fri Nov 07, 2008 12:17 am
by toTOW
[20:00:17] - Reading file work/wuresults_09.dat from core
[20:00:26] (Read 262144000 bytes from disk)
Another strange result file ... 262 MB is way too big
Re: 171.67.108.25 - cannot upload work unit
Posted: Fri Nov 07, 2008 12:32 am
by anandhanju
Which version of the client are you running 3dski?
Also, can you post the PRCG #s and the parts where it says
"Writing nnn bytes of core data to disk...
Done: xxx -> yyy (compressed to ab.c percent)"
There was a project that wasn't being compressed while being sent back. Can't find that post now, but it a couple of months ago I reckon.
Re: 171.67.108.25 - cannot upload work unit
Posted: Fri Nov 07, 2008 12:55 am
by 3dski
I'm running the MPICH SMP client with the 6.23 drop in. Unfortunately, I don't have the other log data you requested as these units were completed long ago and came from my laptop which is powered on/off quite often. This results in the log files rolling off. I checked both the FAHlog and FAHlogPrev files.
My quad core box just successfully uploaded to the other server I for which I started a thread. Perhaps I should post these to the work unit help thread? I ran qfix and nothing changed as well.
Re: 171.67.108.25 - cannot upload work unit
Posted: Sat Nov 08, 2008 5:59 am
by anandhanju
The netload for the SMP work servers is quite high, while the Collection servers are maxed out at 100 each. Something tells me there are more people like 3dski who have ginormous results being generated. Would it help the Pandegroup derieve something if the SMP testers check their results sizes and post if anything is weird?
Re: 171.67.108.25 - cannot upload work unit
Posted: Sun Nov 09, 2008 12:44 pm
by tobor
I'm running the gpu client and am having the same problem with that server...
Re: 171.67.108.25 - cannot upload work unit
Posted: Sun Nov 09, 2008 1:54 pm
by dschief
Also have 2 completed units Q'd-up; mulitple failed upload attempts.
Re: 171.67.108.25 - cannot upload work unit
Posted: Tue Nov 11, 2008 12:56 am
by tobor
tobor wrote:I'm running the gpu client and am having the same problem with that server...
and again....
Re: 171.67.108.25 - cannot upload work unit
Posted: Tue Nov 11, 2008 2:12 am
by zxy
3dski wrote:Code: Select all
[20:00:10] + Attempting to send results [November 6 20:00:10 UTC]
[20:00:10] - Reading file work/wuresults_07.dat from core
[20:00:16] (Read 150995480 bytes from disk)
[20:00:16] Connecting to http://171.67.108.25:8080/
[20:00:16] - Couldn't send HTTP request to server
[20:00:16] + Could not connect to Work Server (results)
[20:00:16] (171.67.108.25:8080)
[20:00:16] + Retrying using alternative port
[20:00:16] Connecting to http://171.67.108.25:80/
[20:00:17] - Couldn't send HTTP request to server
[20:00:17] + Could not connect to Work Server (results)
[20:00:17] (171.67.108.25:80)
[20:00:17] Could not transmit unit 07 to Collection server; keeping in queue.
[20:00:17] Project: 2665 (Run 2, Clone 951, Gen 60)
[20:00:17] + Attempting to send results [November 6 20:00:17 UTC]
[20:00:17] - Reading file work/wuresults_09.dat from core
[20:00:26] (Read 262144000 bytes from disk)
[20:00:26] Connecting to http://171.64.65.64:8080/
[20:00:26] - Couldn't send HTTP request to server
[20:00:26] + Could not connect to Work Server (results)
[20:00:26] (171.64.65.64:8080)
[20:00:26] + Retrying using alternative port
[20:00:26] Connecting to http://171.64.65.64:80/
[20:00:26] - Couldn't send HTTP request to server
[20:00:26] + Could not connect to Work Server (results)
[20:00:26] (171.64.65.64:80)
[20:00:26] - Error: Could not transmit unit 09 (completed November 5) to work server.
[20:00:26] - 39 failed uploads of this unit.
I have a similar situation in a post just prior to this for server 171.64.65.64. I have had no issues getting work units.
i hate the poor servers very much!
Code: Select all
01:20:30] Folding@home Core Shutdown: FINISHED_UNIT
[01:20:33] CoreStatus = 64 (100)
[01:20:33] Sending work to server
[01:20:33] Project: 5506 (Run 3, Clone 95, Gen 241)
[01:20:33] + Attempting to send results [November 11 01:20:33 UTC]
[01:20:35] - Couldn't send HTTP request to server
[01:20:35] + Could not connect to Work Server (results)
[01:20:35] (171.64.65.106:8080)
[01:20:35] + Retrying using alternative port
[01:20:37] - Couldn't send HTTP request to server
[01:20:37] + Could not connect to Work Server (results)
[01:20:37] (171.64.65.106:80)
[01:20:37] - Error: Could not transmit unit 08 (completed November 11) to work server.
[01:20:37] Keeping unit 08 in queue.
[01:20:37] Project: 5506 (Run 3, Clone 95, Gen 241)
[01:20:37] + Attempting to send results [November 11 01:20:37 UTC]
[01:20:39] - Couldn't send HTTP request to server
[01:20:39] + Could not connect to Work Server (results)
[01:20:39] (171.64.65.106:8080)
[01:20:39] + Retrying using alternative port
[01:20:40] - Couldn't send HTTP request to server
[01:20:40] + Could not connect to Work Server (results)
[01:20:40] (171.64.65.106:80)
[01:20:40] - Error: Could not transmit unit 08 (completed November 11) to work server.
[01:20:40] + Attempting to send results [November 11 01:20:40 UTC]
[01:20:41] - Couldn't send HTTP request to server
[01:20:41] (Got status 503)
[01:20:41] + Could not connect to Work Server (results)
[01:20:41] (171.67.108.25:8080)
[01:20:41] + Retrying using alternative port
[01:20:41] - Couldn't send HTTP request to server
[01:20:41] (Got status 503)
[01:20:41] + Could not connect to Work Server (results)
[01:20:41] (171.67.108.25:80)
[01:20:41] Could not transmit unit 08 to Collection server; keeping in queue.
[01:20:41] - Preparing to get new work unit...
[01:20:41] + Attempting to get work packet
[01:20:41] - Connecting to assignment server
[01:20:42] - Successful: assigned to (171.64.65.20).
[01:20:42] + News From Folding@Home: GPU folding beta
[01:20:42] Loaded queue successfully.
[01:20:45] Project: 5506 (Run 3, Clone 95, Gen 241)
[01:20:45] + Attempting to send results [November 11 01:20:45 UTC]
[01:20:46] - Couldn't send HTTP request to server
[01:20:46] + Could not connect to Work Server (results)
[01:20:46] (171.64.65.106:8080)
[01:20:46] + Retrying using alternative port
[01:20:48] - Couldn't send HTTP request to server
[01:20:48] + Could not connect to Work Server (results)
[01:20:48] (171.64.65.106:80)
[01:20:48] - Error: Could not transmit unit 08 (completed November 11) to work server.
[01:20:48] + Attempting to send results [November 11 01:20:48 UTC]
[01:20:49] - Couldn't send HTTP request to server
[01:20:49] (Got status 503)
[01:20:49] + Could not connect to Work Server (results)
[01:20:49] (171.67.108.25:8080)
[01:20:49] + Retrying using alternative port
[01:20:49] - Couldn't send HTTP request to server
[01:20:49] (Got status 503)
[01:20:49] + Could not connect to Work Server (results)
[01:20:49] (171.67.108.25:80)
[01:20:49] Could not transmit unit 08 to Collection server; keeping in queue.
[01:20:49] + Closed connections
[01:20:49]
[01:20:49] + Processing work unit
[01:20:49] Core required: FahCore_11.exe
[01:20:49] Core found.
[01:20:49] Working on queue slot 09 [November 11 01:20:49 UTC]
[01:20:49] + Working ...
[01:20:49]
[01:20:49] *------------------------------*
[01:20:49] Folding@Home GPU Core - Beta
[01:20:49] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[01:20:49]
[01:20:49] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[01:20:49] Build host: amoeba
[01:20:49] Board Type: Nvidia
[01:20:49] Core :
[01:20:49] Preparing to commence simulation
[01:20:49] - Looking at optimizations...
[01:20:49] - Created dyn
[01:20:49] - Files status OK
[01:20:49] - Expanded 44069 -> 244433 (decompressed 554.6 percent)
[01:20:49] Called DecompressByteArray: compressed_data_size=44069 data_size=244433, decompressed_data_size=244433 diff=0
[01:20:49] - Digital signature verified
[01:20:49]
[01:20:49] Project: 5016 (Run 7, Clone 181, Gen 137)
[01:20:49]
[01:20:49] Assembly optimizations on if available.
[01:20:49] Entering M.D.
[01:20:56] Working on 576 p5005_supervillin_e1
[01:20:56] Client config found, loading data.
[01:20:56] Starting GUI Server
[01:22:28] Completed 1%
[01:20:04] GuardedRun: done
[01:20:04] Run: GuardedRun completed.
[01:20:08] - Writing 1294390 bytes of core data to disk...
[01:20:08] ... Done.
[01:20:09] - Shutting down core
[01:20:09]
[01:20:09] Folding@home Core Shutdown: FINISHED_UNIT
[01:20:12] CoreStatus = 64 (100)
[01:20:12] Sending work to server
[01:20:12] Project: 5506 (Run 3, Clone 17, Gen 279)
[01:20:12] - Read packet limit of 540015616... Set to 524286976.
[01:20:12] + Attempting to send results [November 11 01:20:12 UTC]
[01:20:14] - Couldn't send HTTP request to server
[01:20:14] + Could not connect to Work Server (results)
[01:20:14] (171.64.65.106:8080)
[01:20:14] + Retrying using alternative port
[01:20:16] - Couldn't send HTTP request to server
[01:20:16] + Could not connect to Work Server (results)
[01:20:16] (171.64.65.106:80)
[01:20:16] - Error: Could not transmit unit 03 (completed November 11) to work server.
[01:20:16] Keeping unit 03 in queue.
[01:20:16] Project: 5506 (Run 3, Clone 17, Gen 279)
[01:20:16] - Read packet limit of 540015616... Set to 524286976.
[01:20:16] + Attempting to send results [November 11 01:20:16 UTC]
[01:20:17] - Couldn't send HTTP request to server
[01:20:17] + Could not connect to Work Server (results)
[01:20:17] (171.64.65.106:8080)
[01:20:17] + Retrying using alternative port
[01:20:19] - Couldn't send HTTP request to server
[01:20:19] + Could not connect to Work Server (results)
[01:20:19] (171.64.65.106:80)
[01:20:19] - Error: Could not transmit unit 03 (completed November 11) to work server.
[01:20:19] - Read packet limit of 540015616... Set to 524286976.
[01:20:19] + Attempting to send results [November 11 01:20:19 UTC]
[01:20:20] - Couldn't send HTTP request to server
[01:20:20] (Got status 503)
[01:20:20] + Could not connect to Work Server (results)
[01:20:20] (171.67.108.25:8080)
[01:20:20] + Retrying using alternative port
[01:20:20] - Couldn't send HTTP request to server
[01:20:20] (Got status 503)
[01:20:20] + Could not connect to Work Server (results)
[01:20:20] (171.67.108.25:80)
[01:20:20] Could not transmit unit 03 to Collection server; keeping in queue.
[01:20:20] - Preparing to get new work unit...
[01:20:20] + Attempting to get work packet
[01:20:20] - Connecting to assignment server
[01:20:21] - Successful: assigned to (171.64.65.20).
[01:20:21] + News From Folding@Home: GPU folding beta
[01:20:21] Loaded queue successfully.
[01:20:23] Project: 5506 (Run 3, Clone 17, Gen 279)
[01:20:23] - Read packet limit of 540015616... Set to 524286976.
[01:20:23] + Attempting to send results [November 11 01:20:23 UTC]
[01:20:25] - Couldn't send HTTP request to server
[01:20:25] + Could not connect to Work Server (results)
[01:20:25] (171.64.65.106:8080)
[01:20:25] + Retrying using alternative port
[01:20:27] - Couldn't send HTTP request to server
[01:20:27] + Could not connect to Work Server (results)
[01:20:27] (171.64.65.106:80)
[01:20:27] - Error: Could not transmit unit 03 (completed November 11) to work server.
[01:20:27] - Read packet limit of 540015616... Set to 524286976.
[01:20:27] + Attempting to send results [November 11 01:20:27 UTC]
[01:20:27] - Couldn't send HTTP request to server
[01:20:27] (Got status 503)
[01:20:27] + Could not connect to Work Server (results)
[01:20:27] (171.67.108.25:8080)
[01:20:27] + Retrying using alternative port
[01:20:28] - Couldn't send HTTP request to server
[01:20:28] (Got status 503)
[01:20:28] + Could not connect to Work Server (results)
[01:20:28] (171.67.108.25:80)
[01:20:28] Could not transmit unit 03 to Collection server; keeping in queue.
[01:20:28] + Closed connections
[01:20:28]
[01:20:28] + Processing work unit
[01:20:28] Core required: FahCore_11.exe
[01:20:28] Core found.
[01:20:28] Working on queue slot 04 [November 11 01:20:28 UTC]
[01:20:28] + Working ...
[01:20:28]
[01:20:28] *------------------------------*
[01:20:28] Folding@Home GPU Core - Beta
[01:20:28] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[01:20:28]
[01:20:28] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[01:20:28] Build host: amoeba
[01:20:28] Board Type: Nvidia
[01:20:28] Core :
[01:20:28] Preparing to commence simulation
[01:20:28] - Looking at optimizations...
[01:20:28] - Created dyn
[01:20:28] - Files status OK
[01:20:28] - Expanded 44001 -> 244433 (decompressed 555.5 percent)
[01:20:28] Called DecompressByteArray: compressed_data_size=44001 data_size=244433, decompressed_data_size=244433 diff=0
[01:20:28] - Digital signature verified
[01:20:28]
[01:20:28] Project: 5015 (Run 6, Clone 73, Gen 193)
[01:20:28]
[01:20:28] Assembly optimizations on if available.
[01:54:18] Read logfile
[01:54:18] GuardedRun: success in DynamicWrapper
[01:54:18] GuardedRun: done
[01:54:18] Run: GuardedRun completed.
[01:54:19] - Writing 1295217 bytes of core data to disk...
[01:54:19] Done: 1294705 -> 1157047 (compressed to 89.3 percent)
[01:54:19] ... Done.
[01:54:19] - Shutting down core
[01:54:19]
[01:54:19] Folding@home Core Shutdown: FINISHED_UNIT
[01:54:24] CoreStatus = 64 (100)
[01:54:24] Sending work to server
[01:54:24] Project: 5014 (Run 4, Clone 23, Gen 254)
[01:54:24] + Attempting to send results [November 11 01:54:24 UTC]
[01:54:45] + Results successfully sent
[01:54:45] Thank you for your contribution to Folding@Home.
[01:54:45] + Number of Units Completed: 301
[01:54:49] - Preparing to get new work unit...
[01:54:49] + Attempting to get work packet
[01:54:49] - Connecting to assignment server
[01:54:50] - Successful: assigned to (171.64.65.20).
[01:54:50] + News From Folding@Home: GPU folding beta
[01:54:50] Loaded queue successfully.
[01:54:52] + Closed connections
[01:54:52]
[01:54:52] + Processing work unit
[01:54:52] Core required: FahCore_11.exe
[01:54:52] Core found.
[01:54:52] Working on queue slot 07 [November 11 01:54:52 UTC]
[01:54:52] + Working ...
[01:54:52]
[01:54:52] *------------------------------*
[01:54:52] Folding@Home GPU Core - Beta
[01:54:52] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[01:54:52]
[01:54:52] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[01:54:52] Build host: amoeba
[01:54:52] Board Type: Nvidia
[01:54:52] Core :
[01:54:52] Preparing to commence simulation
[01:54:52] - Looking at optimizations...
[01:54:52] - Created dyn
[01:54:52] - Files status OK
[01:54:52] - Expanded 44159 -> 244433 (decompressed 553.5 percent)
[01:54:52] Called DecompressByteArray: compressed_data_size=44159 data_size=244433, decompressed_data_size=244433 diff=0
[01:54:52] - Digital signature verified
[01:54:52]
[01:54:52] Project: 5016 (Run 5, Clone 21, Gen 161)
[01:54:52]
[01:54:52] Assembly optimizations on if available.
[01:54:52] Entering M.D.
[01:54:59] Working on 576 p5005_supervillin_e1
[01:54:59] Client config found, loading data.
[01:54:59] Starting GUI Server
[01:56:32] Completed 1%
[01:58:05] Completed 2%
[01:59:38] Completed 3%
[01:50:47] GuardedRun: done
[01:50:47] Run: GuardedRun completed.
[01:50:50] - Writing 288418 bytes of core data to disk...
[01:50:50] Done: 287906 -> 261581 (compressed to 90.8 percent)
[01:50:50] ... Done.
[01:50:50] - Shutting down core
[01:50:50]
[01:50:50] Folding@home Core Shutdown: FINISHED_UNIT
[01:50:53] CoreStatus = 64 (100)
[01:50:53] Sending work to server
[01:50:53] Project: 5748 (Run 4, Clone 629, Gen 1)
[01:50:53] + Attempting to send results [November 11 01:50:53 UTC]
[01:50:59] + Results successfully sent
[01:50:59] Thank you for your contribution to Folding@Home.
[01:50:59] + Number of Units Completed: 550
[01:51:03] Project: 5506 (Run 0, Clone 611, Gen 144)
[01:51:03] + Attempting to send results [November 11 01:51:03 UTC]
[01:51:04] - Couldn't send HTTP request to server
[01:51:04] + Could not connect to Work Server (results)
[01:51:04] (171.64.65.106:8080)
[01:51:04] + Retrying using alternative port
[01:51:06] - Couldn't send HTTP request to server
[01:51:06] + Could not connect to Work Server (results)
[01:51:06] (171.64.65.106:80)
[01:51:06] - Error: Could not transmit unit 01 (completed November 10) to work server.
[01:51:06] + Attempting to send results [November 11 01:51:06 UTC]
[01:51:08] - Couldn't send HTTP request to server
[01:51:08] + Could not connect to Work Server (results)
[01:51:08] (171.67.108.25:8080)
[01:51:08] + Retrying using alternative port
[01:51:09] - Couldn't send HTTP request to server
[01:51:09] + Could not connect to Work Server (results)
[01:51:09] (171.67.108.25:80)
[01:51:09] Could not transmit unit 01 to Collection server; keeping in queue.
[01:51:09] - Preparing to get new work unit...
[01:51:09] + Attempting to get work packet
[01:51:09] - Connecting to assignment server
[01:51:10] - Successful: assigned to (171.64.65.20).
[01:51:10] + News From Folding@Home: GPU folding beta
[01:51:10] Loaded queue successfully.
[01:51:12] Project: 5506 (Run 0, Clone 611, Gen 144)
[01:51:12] + Attempting to send results [November 11 01:51:12 UTC]
[01:51:14] - Couldn't send HTTP request to server
[01:51:14] + Could not connect to Work Server (results)
[01:51:14] (171.64.65.106:8080)
[01:51:14] + Retrying using alternative port
[01:51:15] - Couldn't send HTTP request to server
[01:51:15] + Could not connect to Work Server (results)
[01:51:15] (171.64.65.106:80)
[01:51:15] - Error: Could not transmit unit 01 (completed November 10) to work server.
[01:51:15] + Attempting to send results [November 11 01:51:15 UTC]
[01:51:38] - Server does not have record of this unit. Will try again later.
[01:51:38] Could not transmit unit 01 to Collection server; keeping in queue.
[01:51:38] + Closed connections
[01:51:38]
[01:51:38] + Processing work unit
[01:51:38] Core required: FahCore_11.exe
[01:51:38] Core found.
[01:51:38] Working on queue slot 03 [November 11 01:51:38 UTC]
[01:51:38] + Working ...
[01:51:38]
[01:51:38] *------------------------------*
[00:58:41] ... Done.
[00:58:41] - Shutting down core
[00:58:41]
[00:58:41] Folding@home Core Shutdown: FINISHED_UNIT
[00:58:44] CoreStatus = 64 (100)
[00:58:44] Sending work to server
[00:58:44] Project: 5016 (Run 9, Clone 0, Gen 196)
[00:58:44] + Attempting to send results [November 11 00:58:44 UTC]
[00:59:05] + Results successfully sent
[00:59:05] Thank you for your contribution to Folding@Home.
[00:59:05] + Number of Units Completed: 545
[00:59:09] Project: 5506 (Run 8, Clone 846, Gen 260)
[00:59:09] + Attempting to send results [November 11 00:59:09 UTC]
[00:59:11] - Couldn't send HTTP request to server
[00:59:11] + Could not connect to Work Server (results)
[00:59:11] (171.64.65.106:8080)
[00:59:11] + Retrying using alternative port
[00:59:13] - Couldn't send HTTP request to server
[00:59:13] + Could not connect to Work Server (results)
[00:59:13] (171.64.65.106:80)
[00:59:13] - Error: Could not transmit unit 06 (completed November 10) to work server.
[00:59:13] + Attempting to send results [November 11 00:59:13 UTC]
[00:59:14] - Couldn't send HTTP request to server
[00:59:14] + Could not connect to Work Server (results)
[00:59:14] (171.67.108.25:8080)
[00:59:14] + Retrying using alternative port
[00:59:15] - Couldn't send HTTP request to server
[00:59:15] + Could not connect to Work Server (results)
[00:59:15] (171.67.108.25:80)
[00:59:15] Could not transmit unit 06 to Collection server; keeping in queue.
[00:59:15] - Preparing to get new work unit...
[00:59:15] + Attempting to get work packet
[00:59:15] - Connecting to assignment server
[00:59:16] - Successful: assigned to (171.64.65.20).
[00:59:16] + News From Folding@Home: GPU folding beta
[00:59:17] Loaded queue successfully.
[00:59:19] Project: 5506 (Run 8, Clone 846, Gen 260)
[00:59:19] + Attempting to send results [November 11 00:59:19 UTC]
[00:59:20] - Couldn't send HTTP request to server
[00:59:20] + Could not connect to Work Server (results)
[00:59:20] (171.64.65.106:8080)
[00:59:20] + Retrying using alternative port
[00:59:22] - Couldn't send HTTP request to server
[00:59:22] + Could not connect to Work Server (results)
[00:59:22] (171.64.65.106:80)
[00:59:22] - Error: Could not transmit unit 06 (completed November 10) to work server.
[00:59:22] + Attempting to send results [November 11 00:59:22 UTC]
[00:59:23] - Couldn't send HTTP request to server
[00:59:23] + Could not connect to Work Server (results)
[00:59:23] (171.67.108.25:8080)
[00:59:23] + Retrying using alternative port
[00:59:25] - Couldn't send HTTP request to server
[00:59:25] + Could not connect to Work Server (results)
[00:59:25] (171.67.108.25:80)
[00:59:25] Could not transmit unit 06 to Collection server; keeping in queue.
[00:59:25] + Closed connections
[00:59:25]
[00:59:25] + Processing work unit
[00:59:25] Core required: FahCore_11.exe
[00:59:25] Core found.
[00:59:25] Working on queue slot 08 [November 11 00:59:25 UTC]
[00:59:25] + Working ...
[00:59:25]
[00:59:25] *------------------------------*
[00:59:25] Folding@Home GPU Core - Beta
[00:59:25] Version 1.19 (Thu Oct 23 10:15:05 PDT 2008)
[00:59:25]
[00:59:25] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[00:59:25] Build host: amoeba
[00:59:25] Board Type: Nvidia
[00:59:25] Core :
[00:59:25] Preparing to commence simulation
[00:59:25] - Looking at optimizations...
[00:59:25] - Created dyn
[00:59:25] - Files status OK
[00:59:25] - Expanded 44154 -> 244433 (decompressed 553.5 percent)
[00:59:25] Called DecompressByteArray: compressed_data_size=44154 data_size=244433, decompressed_data_size=244433 diff=0
[00:59:25] - Digital signature verified
[00:59:25]
[00:59:25] Project: 5013 (Run 0, Clone 241, Gen 142)
[00:59:25]
[00:59:25] Assembly optimizations on if available.
[00:59:25] Entering M.D.
[00:59:31] Working on 576 p5005_supervillin_e1
[00:59:31] Client config found, loading data.
[00:59:32] Starting GUI Server
[01:00:24] Completed 1%
[01:01:17] Completed 2%
[01:02:09] Completed 3%
[01:03:02] Completed 4%
[01:03:54] Completed 5%
[01:04:47] Completed 6%
[01:05:39] Completed 7%
[01:06:32] Completed 8%
[01:07:24] Completed 9%
[01:08:17] Completed 10%
[01:09:09] Completed 11%
[01:10:02] Completed 12%
[01:10:55] Completed 13%
[01:11:48] Completed 14%
[01:12:44] Completed 15%
[01:13:36] Completed 16%
[01:14:29] Completed 17%
[01:15:22] Completed 18%
[01:16:15] Completed 19%
[01:17:07] Completed 20%
[01:18:00] Completed 21%
[01:18:53] Completed 22%
[01:19:46] Completed 23%
[01:20:41] Completed 24%
[01:21:17] Project: 5506 (Run 8, Clone 846, Gen 260)
[01:21:17] + Attempting to send results [November 11 01:21:17 UTC]
[01:21:19] - Couldn't send HTTP request to server
[01:21:19] + Could not connect to Work Server (results)
[01:21:19] (171.64.65.106:8080)
[01:21:19] + Retrying using alternative port
[01:21:21] - Couldn't send HTTP request to server
[01:21:21] + Could not connect to Work Server (results)
[01:21:21] (171.64.65.106:80)
[01:21:21] - Error: Could not transmit unit 06 (completed November 10) to work server.
[01:21:21] + Attempting to send results [November 11 01:21:21 UTC]
[01:21:23] - Couldn't send HTTP request to server
[01:21:23] + Could not connect to Work Server (results)
[01:21:23] (171.67.108.25:8080)
[01:21:23] + Retrying using alternative port
[01:21:28] - Couldn't send HTTP request to server
[01:21:28] + Could not connect to Work Server (results)
[01:21:28] (171.67.108.25:80)
[01:21:28] Could not transmit unit 06 to Collection server; keeping in queue.
[01:21:28] + Working...
[01:21:34] Completed 25%
[01:22:27] Completed 26%
[01:44:58] - Reading up to 33528 from "work/wudata_01.trr": Read 33528
[01:44:58] Read 33528 bytes from arc file; available packet space=786177812
[01:44:58] trr file hash check passed.
[01:44:58] Allocated 560 bytes for edr file
[01:44:58] Read bedfile
[01:44:58] edr file hash check passed.
[01:44:58] Allocated 34902 bytes for logfile
[01:44:58] Read logfile
[01:44:58] GuardedRun: success in DynamicWrapper
[01:44:58] GuardedRun: done
[01:44:58] Run: GuardedRun completed.
[01:45:00] - Writing 288626 bytes of core data to disk...
[01:45:00] Done: 288114 -> 261718 (compressed to 90.8 percent)
[01:45:00] ... Done.
[01:45:00] - Shutting down core
[01:45:00]
[01:45:00] Folding@home Core Shutdown: FINISHED_UNIT
[01:45:02] CoreStatus = 64 (100)
[01:45:02] Sending work to server
[01:45:02] Project: 5748 (Run 4, Clone 727, Gen 5)
[01:45:02] + Attempting to send results [November 11 01:45:02 UTC]
[01:45:08] + Results successfully sent
[01:45:08] Thank you for your contribution to Folding@Home.
[01:45:08] + Number of Units Completed: 557
[01:45:12] Project: 5506 (Run 5, Clone 248, Gen 265)
[01:45:12] + Attempting to send results [November 11 01:45:12 UTC]
[01:45:14] - Couldn't send HTTP request to server
[01:45:14] + Could not connect to Work Server (results)
[01:45:14] (171.64.65.106:8080)
[01:45:14] + Retrying using alternative port
[01:45:16] - Couldn't send HTTP request to server
[01:45:16] + Could not connect to Work Server (results)
[01:45:16] (171.64.65.106:80)
[01:45:16] - Error: Could not transmit unit 00 (completed November 10) to work server.
[01:45:16] + Attempting to send results [November 11 01:45:16 UTC]
[01:45:17] - Couldn't send HTTP request to server
[01:45:17] + Could not connect to Work Server (results)
[01:45:17] (171.67.108.25:8080)
[01:45:17] + Retrying using alternative port
[01:45:18] - Couldn't send HTTP request to server
[01:45:18] + Could not connect to Work Server (results)
[01:45:18] (171.67.108.25:80)
[01:45:18] Could not transmit unit 00 to Collection server; keeping in queue.
[01:45:18] Project: 5506 (Run 5, Clone 248, Gen 265)
[01:45:18] + Attempting to send results [November 11 01:45:18 UTC]
[01:45:20] - Couldn't send HTTP request to server
[01:45:20] + Could not connect to Work Server (results)
[01:45:20] (171.64.65.106:8080)
[01:45:20] + Retrying using alternative port
[01:45:22] - Couldn't send HTTP request to server
[01:45:22] + Could not connect to Work Server (results)
[01:45:22] (171.64.65.106:80)
[01:45:22] - Error: Could not transmit unit 00 (completed November 10) to work server.
[01:45:22] + Attempting to send results [November 11 01:45:22 UTC]
[01:45:23] - Couldn't send HTTP request to server
[01:45:23] + Could not connect to Work Server (results)
[01:45:23] (171.67.108.25:8080)
[01:45:23] + Retrying using alternative port
[01:45:24] - Couldn't send HTTP request to server
[01:45:24] + Could not connect to Work Server (results)
[01:45:24] (171.67.108.25:80)
[01:45:24] Could not transmit unit 00 to Collection server; keeping in queue.
[01:45:24] - Preparing to get new work unit...
[01:45:24] + Attempting to get work packet
[01:45:24] - Connecting to assignment server
[01:45:25] - Successful: assigned to (171.64.65.20).
[01:45:25] + News From Folding@Home: GPU folding beta
[01:45:25] Loaded queue successfully.
[01:45:27] Project: 5506 (Run 5, Clone 248, Gen 265)
[01:45:27] + Attempting to send results [November 11 01:45:27 UTC]
[01:45:29] - Couldn't send HTTP request to server
[01:45:29] + Could not connect to Work Server (results)
[01:45:29] (171.64.65.106:8080)
[01:45:29] + Retrying using alternative port
[01:45:31] - Couldn't send HTTP request to server
[01:45:31] + Could not connect to Work Server (results)
[01:45:31] (171.64.65.106:80)
[01:45:31] - Error: Could not transmit unit 00 (completed November 10) to work server.
[01:45:31] + Attempting to send results [November 11 01:45:31 UTC]
[01:45:54] - Server does not have record of this unit. Will try again later.
[01:45:54] Could not transmit unit 00 to Collection server; keeping in queue.
[01:45:54] Project: 5506 (Run 5, Clone 248, Gen 265)
[01:45:54] + Attempting to send results [November 11 01:45:54 UTC]
[01:45:55] - Couldn't send HTTP request to server
[01:45:55] + Could not connect to Work Server (results)
[01:45:55] (171.64.65.106:8080)
[01:45:55] + Retrying using alternative port
[01:45:57] - Couldn't send HTTP request to server
[01:45:57] + Could not connect to Work Server (results)
[01:45:57] (171.64.65.106:80)
[01:45:57] - Error: Could not transmit unit 00 (completed November 10) to work server.
[01:45:57] + Attempting to send results [November 11 01:45:57 UTC]
[01:45:58] - Couldn't send HTTP request to server
[01:45:58] + Could not connect to Work Server (results)
[01:45:58] (171.67.108.25:8080)
[01:45:58] + Retrying using alternative port
[01:46:00] - Couldn't send HTTP request to server
[01:46:00] + Could not connect to Work Server (results)
[01:46:00] (171.67.108.25:80)
[01:46:00] Could not transmit unit 00 to Collection server; keeping in queue.
[01:46:00] + Closed connections
[01:46:00]
[01:46:00] + Processing work unit
[01:46:00] Core required: FahCore_11.exe
[01:46:00] Core found.
[01:46:00] Working on queue slot 02 [November 11 01:46:00 UTC]
[01:46:00] + Working ...
[01:46:00]
[01:46:00] *------------------------------*
[01:46:00] Folding@Home GPU Core - Beta
[01:46:00] Version 1.19 (Thu Oct 23 10:15:05 PDT 2008)
[01:46:00]
[01:46:00] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[01:46:00] Build host: amoeba
[01:46:00] Board Type: Nvidia
[01:46:00] Core :
[01:46:00] Preparing to commence simulation
[01:46:00] - Looking at optimizations...
[01:46:00] - Created dyn
[01:46:00] - Files status OK
[01:46:00] - Expanded 44189 -> 244433 (decompressed 553.1 percent)
[01:46:00] Called DecompressByteArray: compressed_data_size=44189 data_size=244433, decompressed_data_size=244433 diff=0
[01:46:00] - Digital signature verified
[01:46:00]
[01:46:00] Project: 5013 (Run 8, Clone 135, Gen 134)
[01:46:00]
[01:46:00] Assembly optimizations on if available.
[01:46:00] Entering M.D.
[01:46:07] Working on 576 p5005_supervillin_e1
[01:46:07] Client config found, loading data.
[01:46:07] Starting GUI Server
[01:46:58] Completed 1%
[01:47:48] Completed 2%
[01:48:39] Completed 3%
[01:49:29] Completed 4%
[01:50:20] Completed 5%
[01:51:10] Completed 6%
another seven GPU clients also suffer!
Re: 171.67.108.25 - cannot upload work unit
Posted: Tue Nov 11, 2008 2:25 am
by lobuxracer
Another day folding. Another day with results stacking up across the install base. I'm starting to think this is normal since it seems to happen every couple of days. Apparently PG hasn't capacity planned their part of the deal very well.
Re: 171.67.108.25 - cannot upload work unit
Posted: Tue Nov 11, 2008 2:35 am
by MichaelO
This server is probably overloaded because 171.64.65.106 is in reject mode and this is the alternate upload server for that one. First its 5748 and core 1.19 and now the collection servers. Not a good time to be a Folder.
Re: 171.67.108.25 - cannot upload work unit
Posted: Tue Nov 11, 2008 4:36 am
by zxy
MichaelO wrote:This server is probably overloaded because 171.64.65.106 is in reject mode and this is the alternate upload server for that one. First its 5748 and core 1.19 and now the collection servers. Not a good time to be a Folder.
when i become a folder,my life had been harder than ever,too many things i had to cared and worried about.
Re: 171.67.108.25 - cannot upload work unit
Posted: Wed Nov 12, 2008 1:11 pm
by osgorth
Cannot upload to this server either.
[13:06:46] + Attempting to send results [November 12 13:06:46 UTC]
[13:06:46] - Couldn't send HTTP request to server
[13:06:46] (Got status 503)
[13:06:46] + Could not connect to Work Server (results)
[13:06:46] (171.67.108.25:8080)
[13:06:46] + Retrying using alternative port
[13:06:46] - Couldn't send HTTP request to server
[13:06:46] (Got status 503)
[13:06:46] + Could not connect to Work Server (results)
[13:06:46] (171.67.108.25:80)
[13:06:46] Could not transmit unit 04 to Collection server; keeping in queue.
Re: 171.67.108.25 - cannot upload work unit
Posted: Wed Nov 12, 2008 1:14 pm
by Razor_FX_II
Lots of work to turn in. Anyone looking into this or are we on our own again?
Re: 171.67.108.25 - cannot upload work unit
Posted: Fri Nov 14, 2008 8:10 am
by soa_rru
Dont exactly know if its this server causing the uploads problems or 171.64.65.65:8080
Code: Select all
[07:55:48] Preparing to commence simulation
[07:55:48] - Assembly optimizations manually forced on.
[07:55:48] - Not checking prior termination.
[07:55:54] - Couldn't send HTTP request to server
[07:55:54] + Could not connect to Work Server (results)
[07:55:54] (171.64.65.65:8080)
[07:55:54] - Error: Could not transmit unit 04 (completed November 11) to work server.
[07:55:54] - 13 failed uploads of this unit.
[07:55:54] + Attempting to send results
[07:55:54] - Reading file work/wuresults_04.dat from core
[07:55:54] (Read 17471595 bytes from disk)
[07:55:54] Connecting to http://171.67.108.25:8080/
[07:56:01] - Couldn't send HTTP request to server
[07:56:01] + Could not connect to Work Server (results)
[07:56:01] (171.67.108.25:8080)
[07:56:01] Could not transmit unit 04 to Collection server; keeping in queue.
[07:56:01] + Sent 0 of 1 completed units to the server
[07:56:01] - Autosend completed
