Page 1 of 2
Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Fri Oct 03, 2008 10:22 pm
by StillinSchool
[03/10/08 - 16:59:46] Reloading 896
[03/10/08 - 16:59:46] 896 has an unknown state (Unable to find a complete frame)
[03/10/08 - 16:59:46] Cannot determine frame number for 896 (this isn't a problem)
[03/10/08 - 16:59:46] 896 [ETA] | avg=N/A | last=N/A
[03/10/08 - 17:04:46] Reloading 896
[03/10/08 - 17:04:46] 896 has an unknown state (Unable to find a complete frame)
[03/10/08 - 17:04:46] Cannot determine frame number for 896 (this isn't a problem)
[03/10/08 - 17:04:46] 896 [ETA] | avg=N/A | last=N/A
[03/10/08 - 17:09:46] Reloading 896
[03/10/08 - 17:09:46] 896 has an unknown state (Unable to find a complete frame)
[03/10/08 - 17:09:46] Cannot determine frame number for 896 (this isn't a problem)
[03/10/08 - 17:09:46] 896 [ETA] | avg=N/A | last=N/A
[03/10/08 - 17:14:46] Reloading 896
[03/10/08 - 17:14:46] 896 has an unknown state (Unable to find a complete frame)
[03/10/08 - 17:14:46] Cannot determine frame number for 896 (this isn't a problem)
[03/10/08 - 17:14:46] 896 [ETA] | avg=N/A | last=N/A
Downloaded this Job on Sept. 23rd.
Preferred Deadline: October 13th.
Final Deadline: November 2nd.
Problem is that other than me clearing the logs, this job is stuck at 0% and after a bit, FOLDING creates an ERROR, box appears.
This project is on day 10 for this computer and it has not processed even 1%
I have run the installation for a FIX of the folding software, still have the same issue. What do I need to do with this?
Re: Project: 2620 (R81, C4, G0) - help needed.
Posted: Fri Oct 03, 2008 10:28 pm
by toTOW
Please post the FAHlog.txt file.
Re: Project: 2620 (R81, C4, G0) - help needed.
Posted: Fri Oct 03, 2008 10:43 pm
by StillinSchool
Code: Select all
[09:26:02] Finished Work Unit:
[09:26:02] - Reading up to 3024264 from "work/wudata_03.arc": Read 3024264
[09:26:02] - Reading up to 5232344 from "work/wudata_03.xtc": Read 5232344
[09:26:02] goefile size: 0
[09:26:02] logfile size: 36338
[09:26:02] Leaving Run
[09:26:04] - Writing 8342474 bytes of core data to disk...
[09:26:07] Done: 8341962 -> 8117935 (compressed to 97.3 percent)
[09:26:08] ... Done.
[09:26:08] - Shutting down core
[09:26:08]
[09:26:08] Folding@home Core Shutdown: FINISHED_UNIT
[09:26:12] CoreStatus = 64 (100)
[09:26:12] Sending work to server
[09:26:12] Project: 2621 (Run 60, Clone 27, Gen 46)
[09:26:12] + Attempting to send results [September 23 09:26:12 UTC]
[09:26:31] + Results successfully sent
[09:26:31] Thank you for your contribution to Folding@Home.
[09:26:31] + Number of Units Completed: 23
[09:26:36] - Preparing to get new work unit...
[09:26:36] + Attempting to get work packet
[09:26:36] - Connecting to assignment server
[09:26:37] - Successful: assigned to (130.49.240.81).
[09:26:37] + News From Folding@Home: Welcome to Folding@Home
[09:26:37] Loaded queue successfully.
[09:26:38] + Could not connect to Work Server
[09:26:38] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[09:26:57] + Attempting to get work packet
[09:26:57] - Connecting to assignment server
[09:26:57] - Successful: assigned to (171.64.65.65).
[09:26:57] + News From Folding@Home: Welcome to Folding@Home
[09:26:57] Loaded queue successfully.
[09:26:57] - Couldn't send HTTP request to server
[09:26:57] + Could not connect to Work Server
[09:26:57] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[09:27:17] + Attempting to get work packet
[09:27:17] - Connecting to assignment server
[09:27:17] - Successful: assigned to (171.64.65.65).
[09:27:17] + News From Folding@Home: Welcome to Folding@Home
[09:27:17] Loaded queue successfully.
[09:27:23] + Closed connections
[09:27:23]
[09:27:23] + Processing work unit
[09:27:23] Core required: FahCore_78.exe
[09:27:23] Core found.
[09:27:23] Working on queue slot 04 [September 23 09:27:23 UTC]
[09:27:23] + Working ...
[09:27:24]
[09:27:24] *------------------------------*
[09:27:24] Folding@Home Gromacs Core
[09:27:24] Version 1.90 (March 8, 2006)
[09:27:24]
[09:27:24] Preparing to commence simulation
[09:27:24] - Looking at optimizations...
[09:27:24] - Created dyn
[09:27:24] - Files status OK
[09:27:26] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[09:27:27] - Starting from initial work packet
[09:27:27]
[09:27:27] Project: 2620 (Run 81, Clone 4, Gen 0)
[09:27:27]
[09:27:27] Assembly optimizations on if available.
[09:27:27] Entering M.D.
[09:27:33] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[09:27:33]
[09:27:34] Writing local files
[10:10:07] Gromacs error.
[10:10:07]
[10:10:07] Folding@home Core Shutdown: UNKNOWN_ERROR
[10:10:11] CoreStatus = 79 (121)
[10:10:11] Client-core communications error: ERROR 0x79
[10:10:11] This is a sign of more serious problems, shutting down.
[17:36:30] + Working...
[11:33:05] + Working...
[18:13:14] + Working...
[11:00:11] + Working...
--- Opening Log file [September 25 11:27:36 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[11:27:36] - Ask before connecting: No
[11:27:36] - User name: StillinSchool (Team 145081)
[11:27:36] - User ID: 3D70203E3B5FCFC0
[11:27:36] - Machine ID: 9
[11:27:36]
[11:27:36] Loaded queue successfully.
[11:27:36] Initialization complete
[11:27:36]
[11:27:36] + Processing work unit
[11:27:36] Core required: FahCore_78.exe
[11:27:36] Core found.
[11:27:36] Working on queue slot 04 [September 25 11:27:36 UTC]
[11:27:36] + Working ...
[11:27:36]
[11:27:36] *------------------------------*
[11:27:36] Folding@Home Gromacs Core
[11:27:36] Version 1.90 (March 8, 2006)
[11:27:36]
[11:27:36] Preparing to commence simulation
[11:27:36] - Ensuring status. Please wait.
[11:27:53] - Looking at optimizations...
[11:27:53] - Working with standard loops on this execution.
[11:27:53] - Created dyn
[11:27:53] - Files status OK
[11:27:56] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[11:27:56] - Starting from initial work packet
[11:27:56]
[11:27:56] Project: 2620 (Run 81, Clone 4, Gen 0)
[11:27:56]
[11:27:56] Entering M.D.
[11:28:03] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[11:28:03]
[11:28:03] Writing local files
--- Opening Log file [September 25 11:59:38 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[11:59:38] - Ask before connecting: No
[11:59:38] - User name: StillinSchool (Team 145081)
[11:59:38] - User ID: 3D70203E3B5FCFC0
[11:59:38] - Machine ID: 9
[11:59:38]
[11:59:38] Loaded queue successfully.
[11:59:38] Initialization complete
[11:59:38]
[11:59:38] + Processing work unit
[11:59:38] Core required: FahCore_78.exe
[11:59:38] Core found.
[11:59:38] Working on queue slot 04 [September 25 11:59:38 UTC]
[11:59:38] + Working ...
[11:59:38]
[11:59:38] *------------------------------*
[11:59:38] Folding@Home Gromacs Core
[11:59:38] Version 1.90 (March 8, 2006)
[11:59:38]
[11:59:38] Preparing to commence simulation
[11:59:38] - Looking at optimizations...
[11:59:38] - Files status OK
[11:59:41] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[11:59:41]
[11:59:41] Project: 2620 (Run 81, Clone 4, Gen 0)
[11:59:41]
[11:59:41] Assembly optimizations on if available.
[11:59:41] Entering M.D.
[11:59:49] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[11:59:49]
[11:59:49] Writing local files
[12:42:29] Gromacs error.
[12:42:29]
[12:42:29] Folding@home Core Shutdown: UNKNOWN_ERROR
[12:42:32] CoreStatus = 79 (121)
[12:42:32] Client-core communications error: ERROR 0x79
[12:42:32] This is a sign of more serious problems, shutting down.
[11:22:57] + Working...
[17:22:57] + Working...
[12:47:37] + Working...
[12:47:36] + Working...
[11:42:51] + Working...
--- Opening Log file [September 29 11:46:36 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[11:46:36] - Ask before connecting: No
[11:46:36] - User name: StillinSchool (Team 145081)
[11:46:36] - User ID: 3D70203E3B5FCFC0
[11:46:36] - Machine ID: 9
[11:46:36]
[11:46:36] Loaded queue successfully.
[11:46:36] Initialization complete
[11:46:36]
[11:46:36] + Processing work unit
[11:46:36] Core required: FahCore_78.exe
[11:46:36] Core found.
[11:46:36] Working on queue slot 04 [September 29 11:46:36 UTC]
[11:46:36] + Working ...
[11:46:36]
[11:46:36] *------------------------------*
[11:46:36] Folding@Home Gromacs Core
[11:46:36] Version 1.90 (March 8, 2006)
[11:46:36]
[11:46:36] Preparing to commence simulation
[11:46:36] - Ensuring status. Please wait.
[11:46:53] - Looking at optimizations...
[11:46:53] - Working with standard loops on this execution.
[11:46:53] - Created dyn
[11:46:53] - Files status OK
[11:46:56] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
Folding@Home Client Shutdown.
--- Opening Log file [September 29 11:47:04 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[11:47:04] - Ask before connecting: No
[11:47:04] - User name: StillinSchool (Team 145081)
[11:47:04] - User ID: 3D70203E3B5FCFC0
[11:47:04] - Machine ID: 9
[11:47:04]
[11:47:04] Loaded queue successfully.
[11:47:04] Initialization complete
[11:47:04]
[11:47:04] + Processing work unit
[11:47:04] Core required: FahCore_78.exe
[11:47:04] Core found.
[11:47:04] Working on queue slot 04 [September 29 11:47:04 UTC]
[11:47:04] + Working ...
[11:47:04]
[11:47:04] *------------------------------*
[11:47:04] Folding@Home Gromacs Core
[11:47:04] Version 1.90 (March 8, 2006)
[11:47:04]
[11:47:04] Preparing to commence simulation
[11:47:04] - Looking at optimizations...
[11:47:04] - Files status OK
[11:47:07] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[11:47:07] - Starting from initial work packet
[11:47:07]
[11:47:07] Project: 2620 (Run 81, Clone 4, Gen 0)
[11:47:07]
[11:47:07] Assembly optimizations on if available.
[11:47:07] Entering M.D.
[11:47:14] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[11:47:14]
[11:47:14] Writing local files
--- Opening Log file [September 29 12:49:04 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[12:49:04] - Ask before connecting: No
[12:49:04] - User name: StillinSchool (Team 145081)
[12:49:04] - User ID: 3D70203E3B5FCFC0
[12:49:04] - Machine ID: 9
[12:49:04]
[12:49:05] Loaded queue successfully.
[12:49:05] Initialization complete
[12:49:05]
[12:49:05] + Processing work unit
[12:49:05] Core required: FahCore_78.exe
[12:49:05] Core found.
[12:49:05] Working on queue slot 04 [September 29 12:49:05 UTC]
[12:49:05] + Working ...
[12:49:05]
[12:49:05] *------------------------------*
[12:49:05] Folding@Home Gromacs Core
[12:49:05] Version 1.90 (March 8, 2006)
[12:49:05]
[12:49:05] Preparing to commence simulation
[12:49:05] - Looking at optimizations...
[12:49:05] - Files status OK
[12:49:07] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[12:49:07]
[12:49:07] Project: 2620 (Run 81, Clone 4, Gen 0)
[12:49:07]
[12:49:08] Assembly optimizations on if available.
[12:49:08] Entering M.D.
[12:49:14] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[12:49:14]
[12:49:14] Writing local files
[13:31:15] Gromacs error.
[13:31:15]
[13:31:15] Folding@home Core Shutdown: UNKNOWN_ERROR
[13:31:18] CoreStatus = 79 (121)
[13:31:18] Client-core communications error: ERROR 0x79
[13:31:18] This is a sign of more serious problems, shutting down.
[18:49:04] + Working...
[00:49:04] + Working...
[11:19:31] + Working...
[17:19:30] + Working...
[23:19:30] + Working...
[13:16:32] + Working...
[19:16:32] + Working...
[13:16:31] + Working...
[21:14:16] + Working...
[11:29:57] + Working...
[20:13:15] + Working...
--- Opening Log file [October 3 20:16:36 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[20:16:36] - Ask before connecting: No
[20:16:36] - User name: StillinSchool (Team 145081)
[20:16:36] - User ID: 3D70203E3B5FCFC0
[20:16:36] - Machine ID: 9
[20:16:36]
[20:16:36] Loaded queue successfully.
[20:16:36] Initialization complete
[20:16:36]
[20:16:36] + Processing work unit
[20:16:36] Core required: FahCore_78.exe
[20:16:36] Core found.
[20:16:36] Working on queue slot 04 [October 3 20:16:36 UTC]
[20:16:36] + Working ...
[20:16:36]
[20:16:36] *------------------------------*
[20:16:36] Folding@Home Gromacs Core
[20:16:36] Version 1.90 (March 8, 2006)
[20:16:36]
[20:16:36] Preparing to commence simulation
[20:16:36] - Ensuring status. Please wait.
[20:16:53] CoreStatus = 62 (98)
[20:16:53] + Restarting core (settings changed)
[20:16:53]
[20:16:53] + Processing work unit
[20:16:53] Core required: FahCore_78.exe
[20:16:53] Core found.
[20:16:53] Working on queue slot 04 [October 3 20:16:53 UTC]
[20:16:53] + Working ...
[20:16:53]
[20:16:53] *------------------------------*
[20:16:53] Folding@Home Gromacs Core
[20:16:53] Version 1.90 (March 8, 2006)
[20:16:53]
[20:16:53] Preparing to commence simulation
[20:16:53] - Ensuring status. Please wait.
[20:17:10] - Looking at optimizations...
[20:17:10] - Not checking prior termination.
[20:17:13] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[20:17:13]
[20:17:13] Project: 2620 (Run 81, Clone 4, Gen 0)
[20:17:13]
[20:17:13] Assembly optimizations on if available.
[20:17:13] Entering M.D.
[20:17:20] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[20:17:20]
[20:17:20] Writing local files
[20:18:27] Opening C:\Program Files\Folding@home\Folding@home-x86\MyFolding.html...
[21:00:11] Gromacs error.
[21:00:11]
[21:00:11] Folding@home Core Shutdown: UNKNOWN_ERROR
[21:00:15] CoreStatus = 79 (121)
[21:00:15] Client-core communications error: ERROR 0x79
[21:00:15] This is a sign of more serious problems, shutting down.
Re: Project: 2620 (R81, C4, G0) - help needed.
Posted: Fri Oct 03, 2008 10:45 pm
by StillinSchool
I grabbed the log just after the last good job on Sept 23rd.
I would also like to note that I found another Thread for this exact same Project / R / C / G by shadeyB on Oct. 2nd.
I just read the thread and can follow those instruction, but Just like him, Im afraid either I or someone else will get this WU again.
Can these not be flagged for errors and not resent to folders?
Do you want me to dump the file?
Re: Project: 2620 (R81, C4, G0) - help needed.
Posted: Fri Oct 03, 2008 10:53 pm
by toTOW
Thanks, you're not alone with this problem : viewtopic.php?f=19&t=5982
As I don't know what could cause the error, I've alerted the people in charge of this project.
Re: Project: 2620 (R81, C4, G0) - help needed.
Posted: Fri Oct 03, 2008 10:57 pm
by StillinSchool
Dumped folder and DAT, got a new assignment.
Re: Project: 2620 (R81, C4, G0) - help needed.
Posted: Fri Oct 03, 2008 11:03 pm
by toTOW
Unfortunately, it's currently the only way to solve the issue.
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Fri Oct 10, 2008 9:52 pm
by StillinSchool
Well it appears that I ended up getting this same WU yet again.
Dumping the folder again.
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Fri Oct 17, 2008 9:35 pm
by StillinSchool
And yet again, man I wish they would delete this one. Everytime I reobtain this it has the original date that I DL'ed it for work. I started to post this 2 days ago and decided to let it go. Well...
Here is the log after deleting the Work Folder and Queue.dat file and just restarting it then:
Code: Select all
--- Opening Log file [October 16 11:51:22 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[11:51:22] - Ask before connecting: No
[11:51:22] - User name: StillinSchool (Team 145081)
[11:51:22] - User ID: 3D70203E3B5FCFC0
[11:51:22] - Machine ID: 9
[11:51:22]
[11:51:22] Loaded queue successfully.
[11:51:22] Initialization complete
[11:51:22]
[11:51:22] + Processing work unit
[11:51:22] Core required: FahCore_78.exe
[11:51:22] Core found.
[11:51:22] Working on queue slot 05 [October 16 11:51:22 UTC]
[11:51:22] + Working ...
[11:51:23]
[11:51:23] *------------------------------*
[11:51:23] Folding@Home Gromacs Core
[11:51:23] Version 1.90 (March 8, 2006)
[11:51:23]
[11:51:23] Preparing to commence simulation
[11:51:23] - Ensuring status. Please wait.
[11:51:40] - Looking at optimizations...
[11:51:40] - Working with standard loops on this execution.
[11:51:40] - Created dyn
[11:51:40] - Files status OK
[11:51:42] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[11:51:42] - Starting from initial work packet
[11:51:42]
[11:51:42] Project: 2620 (Run 81, Clone 4, Gen 0)
[11:51:42]
[11:51:43] Entering M.D.
[11:51:49] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[11:51:49]
[11:51:49] Writing local files
Folding@Home Client Shutdown.
--- Opening Log file [October 16 11:54:46 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[11:54:46] - Ask before connecting: No
[11:54:46] - User name: StillinSchool (Team 145081)
[11:54:46] - User ID: 3D70203E3B5FCFC0
[11:54:46] - Machine ID: 9
[11:54:46]
[11:54:46] Work directory not found. Creating...
[11:54:46] Could not open work queue, generating new queue...
[11:54:47] Initialization complete
[11:54:47] - Preparing to get new work unit...
[11:54:47] + Attempting to get work packet
[11:54:47] - Connecting to assignment server
[11:54:48] - Successful: assigned to (130.49.240.81).
[11:54:48] + News From Folding@Home: Welcome to Folding@Home
[11:54:48] Loaded queue successfully.
[11:54:49] + Could not connect to Work Server
[11:54:49] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[11:55:00] + Attempting to get work packet
[11:55:00] - Connecting to assignment server
[11:55:00] - Successful: assigned to (130.49.240.81).
[11:55:00] + News From Folding@Home: Welcome to Folding@Home
[11:55:00] Loaded queue successfully.
[11:55:01] + Could not connect to Work Server
[11:55:01] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[11:55:17] + Attempting to get work packet
[11:55:17] - Connecting to assignment server
[11:55:17] - Successful: assigned to (130.49.240.81).
[11:55:17] + News From Folding@Home: Welcome to Folding@Home
[11:55:18] Loaded queue successfully.
[11:55:18] + Could not connect to Work Server
[11:55:18] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[11:55:51] + Attempting to get work packet
[11:55:51] - Connecting to assignment server
[11:55:51] - Successful: assigned to (130.49.240.81).
[11:55:51] + News From Folding@Home: Welcome to Folding@Home
[11:55:51] Loaded queue successfully.
[11:55:52] + Could not connect to Work Server
[11:55:52] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[11:56:44] + Attempting to get work packet
[11:56:44] - Connecting to assignment server
[11:56:44] - Successful: assigned to (130.49.240.81).
[11:56:44] + News From Folding@Home: Welcome to Folding@Home
[11:56:44] Loaded queue successfully.
[11:56:45] + Could not connect to Work Server
[11:56:45] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[11:58:08] + Attempting to get work packet
[11:58:08] - Connecting to assignment server
[11:58:08] + No appropriate work server was available; will try again in a bit.
[11:58:08] + Couldn't get work instructions.
[11:58:08] - Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
[12:00:57] + Attempting to get work packet
[12:00:57] - Connecting to assignment server
[12:00:57] + No appropriate work server was available; will try again in a bit.
[12:00:57] + Couldn't get work instructions.
[12:00:57] - Attempt #7 to get work failed, and no other work to do.
Waiting before retry.
[12:06:22] + Attempting to get work packet
[12:06:22] - Connecting to assignment server
[12:06:22] + No appropriate work server was available; will try again in a bit.
[12:06:22] + Couldn't get work instructions.
[12:06:22] - Attempt #8 to get work failed, and no other work to do.
Waiting before retry.
[12:17:16] + Attempting to get work packet
[12:17:16] - Connecting to assignment server
[12:17:17] - Successful: assigned to (130.49.240.81).
[12:17:17] + News From Folding@Home: Welcome to Folding@Home
[12:17:17] Loaded queue successfully.
[12:17:17] + Could not connect to Work Server
[12:17:17] - Attempt #9 to get work failed, and no other work to do.
Waiting before retry.
[12:38:44] + Attempting to get work packet
[12:38:44] - Connecting to assignment server
[12:38:45] - Successful: assigned to (130.49.240.81).
[12:38:45] + News From Folding@Home: Welcome to Folding@Home
[12:38:45] Loaded queue successfully.
[12:38:45] + Could not connect to Work Server
[12:38:45] - Attempt #10 to get work failed, and no other work to do.
Waiting before retry.
[13:21:34] + Attempting to get work packet
[13:21:34] - Connecting to assignment server
[13:21:36] - Successful: assigned to (171.64.65.65).
[13:21:36] + News From Folding@Home: Welcome to Folding@Home
[13:21:36] Loaded queue successfully.
[13:21:53] + Closed connections
[13:21:53]
[13:21:53] + Processing work unit
[13:21:53] Core required: FahCore_78.exe
[13:21:53] Core found.
[13:21:53] Working on queue slot 01 [October 16 13:21:53 UTC]
[13:21:53] + Working ...
[13:21:53]
[13:21:53] *------------------------------*
[13:21:53] Folding@Home Gromacs Core
[13:21:53] Version 1.90 (March 8, 2006)
[13:21:53]
[13:21:53] Preparing to commence simulation
[13:21:53] - Looking at optimizations...
[13:21:53] - Created dyn
[13:21:53] - Files status OK
[13:21:56] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[13:21:56] - Starting from initial work packet
[13:21:56]
[13:21:56] Project: 2620 (Run 81, Clone 4, Gen 0)
[13:21:56]
[13:21:56] Assembly optimizations on if available.
[13:21:56] Entering M.D.
[13:22:03] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[13:22:03]
[13:22:03] Writing local files
[14:03:43] Gromacs error.
[14:03:43]
[14:03:43] Folding@home Core Shutdown: UNKNOWN_ERROR
[14:03:47] CoreStatus = 79 (121)
[14:03:47] Client-core communications error: ERROR 0x79
[14:03:47] This is a sign of more serious problems, shutting down.
[19:48:27] + Working...
[13:24:00] + Working...
[21:28:51] + Working...
--- Opening Log file [October 17 21:30:47 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@home\Folding@home-x86
[21:30:47] - Ask before connecting: No
[21:30:47] - User name: StillinSchool (Team 145081)
[21:30:47] - User ID: 3D70203E3B5FCFC0
[21:30:47] - Machine ID: 9
[21:30:47]
[21:30:47] Loaded queue successfully.
[21:30:47] Initialization complete
[21:30:47]
[21:30:47] + Processing work unit
[21:30:47] Core required: FahCore_78.exe
[21:30:47] Core found.
[21:30:47] Working on queue slot 01 [October 17 21:30:47 UTC]
[21:30:47] + Working ...
[21:30:47]
[21:30:47] *------------------------------*
[21:30:47] Folding@Home Gromacs Core
[21:30:47] Version 1.90 (March 8, 2006)
[21:30:47]
[21:30:47] Preparing to commence simulation
[21:30:47] - Ensuring status. Please wait.
[21:31:04] - Looking at optimizations...
[21:31:04] - Working with standard loops on this execution.
[21:31:04] - Created dyn
[21:31:04] - Files status OK
[21:31:07] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[21:31:07] - Starting from initial work packet
[21:31:07]
[21:31:07] Project: 2620 (Run 81, Clone 4, Gen 0)
[21:31:07]
[21:31:08] Entering M.D.
[21:31:14] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[21:31:14]
[21:31:14] Writing local files
Can we please get this WU deleted? Dropping it just to reobtain it at a later time is getting stupid. I pretty sure I will have to take this computer offline as it is doing NOTHING with the present situation of reobtaining the same defective WU or causing an error when try to obtain new work.
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Fri Oct 17, 2008 11:24 pm
by toTOW
Could you RAR your FAH folder and post it online ? I'd like to try on my computer to see if someone else can run it.
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Mon Oct 20, 2008 11:46 am
by StillinSchool
Dont have a file account anywhere. Do you have access to the
[email protected]? As I have sent it there. If it bounces I will resend. I ZIPPED the whole Folding@home folder
Code: Select all
[01:09:09] Writing checkpoint files
[01:24:10] Writing checkpoint files
[01:25:37] Writing local files
[01:25:37] Completed 5000000 out of 5000000 steps (100%)
[01:25:37] Writing checkpoint files
[01:26:38]
[01:26:38] Finished Work Unit:
[01:26:38] Leaving Run
[01:26:41] - Writing 670323 bytes of core data to disk...
[01:26:41] ... Done.
[01:26:41] - Shutting down core
[01:26:41]
[01:26:41] Folding@home Core Shutdown: FINISHED_UNIT
[01:26:44] CoreStatus = 64 (100)
[01:26:44] Sending work to server
[01:26:44] Project: 896 (Run 9, Clone 989, Gen 29)
[01:26:44] + Attempting to send results [October 19 01:26:44 UTC]
[01:26:45] + Results successfully sent
[01:26:45] Thank you for your contribution to Folding@Home.
[01:26:45] + Starting local stats count at 1
[01:26:49] - Preparing to get new work unit...
[01:26:49] + Attempting to get work packet
[01:26:49] - Connecting to assignment server
[01:26:50] - Successful: assigned to (171.64.65.65).
[01:26:50] + News From Folding@Home: Welcome to Folding@Home
[01:26:50] Loaded queue successfully.
[01:26:54] + Closed connections
[01:26:54]
[01:26:54] + Processing work unit
[01:26:54] Core required: FahCore_78.exe
[01:26:54] Core found.
[01:26:54] Working on queue slot 02 [October 19 01:26:54 UTC]
[01:26:54] + Working ...
[01:26:54]
[01:26:54] *------------------------------*
[01:26:54] Folding@Home Gromacs Core
[01:26:54] Version 1.90 (March 8, 2006)
[01:26:54]
[01:26:54] Preparing to commence simulation
[01:26:54] - Looking at optimizations...
[01:26:54] - Created dyn
[01:26:54] - Files status OK
[01:26:57] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[01:26:57] - Starting from initial work packet
[01:26:57]
[01:26:57] [b]Project: 2620 (Run 81, Clone 4, Gen 0)[/b]
[01:26:57]
[01:26:57] Assembly optimizations on if available.
[01:26:57] Entering M.D.
[01:27:04] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[01:27:04]
[01:27:04] Writing local files
[02:09:39] Gromacs error.
[02:09:39]
[02:09:39] Folding@home Core Shutdown: UNKNOWN_ERROR
[02:09:42] CoreStatus = 79 (121)
[02:09:42] Client-core communications error: ERROR 0x79
[02:09:42] This is a sign of more serious problems, shutting down.
[03:48:23] + Working...
[13:06:16] + Working...
[11:25:21] + Working...
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Mon Oct 20, 2008 1:08 pm
by uncle_fungus
StillinSchool wrote:Dont have a file account anywhere. Do you have access to the
[email protected]? As I have sent it there. If it bounces I will resend. I ZIPPED the whole Folding@home folder
No he doesn't, but I do, so I've forwarded it on.
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Mon Oct 20, 2008 2:22 pm
by toTOW
I've watched carefully the core behavior on this, and here is what I found :
Code: Select all
[13:47:30] *------------------------------*
[13:47:30] Folding@Home Gromacs Core
[13:47:30] Version 1.90 (March 8, 2006)
[13:47:30]
[13:47:30] Preparing to commence simulation
[13:47:30] - Looking at optimizations...
[13:47:30] - Files status OK
[13:47:32] - Expanded 654038 -> 14061929 (decompressed 2150.0 percent)
[13:47:32]
[13:47:32] Project: 2620 (Run 81, Clone 4, Gen 0)
[13:47:32]
[13:47:32] Assembly optimizations on if available.
[13:47:32] Entering M.D.
[13:47:39] Protein: p2620_p1475_tet1_03_1 t= 20000.00000
[13:47:39]
[13:47:39] Writing local files
At this point, memory usage from the core slowly grows ... 10 minutes later the core uses 600 MB
... 840 MB after 20 minutes ... 1 GB after 30 minutes ... and it finally failed with about 1.1 GB used :
Code: Select all
[14:19:19] Gromacs error.
[14:19:19]
[14:19:19] Folding@home Core Shutdown: UNKNOWN_ERROR
[14:19:22] CoreStatus = 79 (121)
[14:19:22] Client-core communications error: ERROR 0x79
[14:19:22] This is a sign of more serious problems, shutting down.
I guess the UNKNOWN_ERROR is in fact a out of memory error : the WU dies when there is no more free memory to allocate
I've sent a message to Peter to ask him have a look at thus one.
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Mon Oct 20, 2008 3:51 pm
by kasson
Thanks for the reports and investigation. We have removed this WU from further assignment.
Re: Project: 2620 (Run 81, Clone 4, Gen 0) - help needed.
Posted: Mon Oct 20, 2008 10:49 pm
by StillinSchool
Thank you
