Page 1 of 1
How to add CPU
Posted: Sun Apr 06, 2025 5:14 pm
by silverpulser
Running 7.6.21 on GPU only by adding in Folding Slots ID:
1 GPU
I have now upgraded to a better multi core cpu and would like to add the ability to fold on 3 of the four cores (leaving 1 for the gpu!
How do I do this?
Re: How to add CPU
Posted: Sun Apr 06, 2025 5:18 pm
by Joe_H
Use Configure in FAHControl, select Slots, Add a CPU slot, you can set the number of CPU threads there to 3.
It has been a while since I ran 7.6.21, and I only did on a Mac. I do recall mention by some running on Windows that depending on the scheme used the radio buttons for CPU vs GPU on the left could be hard to see.
Re: How to add CPU
Posted: Sun Apr 06, 2025 5:40 pm
by muziqaz
Right click on systray icon, click on Advanced Control>Configure>Slots
Click on Add+, then click on CPU, enter number of threads you want the slot to use. Click Ok>Save, and Start folding
Re: How to add CPU
Posted: Sun Apr 06, 2025 10:55 pm
by silverpulser
That worked thanks. Up and running cpu work units now