FAH is has been sucessfully installed, and client identify me, correct.
Actually i have installed Folding at home, and the drivers of this page has been installed
Radeon™ Software for Linux® version 20.04 for Ubuntu 18.04.4 HWE
OpenCL: Not detected: clGetPlatformIDs() returned -1001
No CUDA or OpenCL 1.2+ support detected for GPU slot gpu:43:0 Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]. Disabling.
sudo lshw -numeric -C display
descripción: VGA compatible controller
producto: Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731F]
fabricante: Advanced Micro Devices, Inc. [AMD/ATI] [1002]
id físico: 0
información del bus: pci@0000:2b:00.0
versión: c1
anchura: 64 bits
reloj: 33MHz
capacidades: pm pciexpress msi vga_controller bus_master cap_list rom
configuración: driver=amdgpu latency=0
recursos: irq:72 memoria:e0000000-efffffff memoria:f0000000-f01fffff ioport:e000(size=256) memoria:fcb00000-fcb7ffff memoria:c0000-dffff
lsmod | grep amd
amdgpu 5246976 13
amd_iommu_v2 20480 1 amdgpu
amd_sched 32768 1 amdgpu
amdttm 102400 1 amdgpu
edac_mce_amd 32768 0
amdkcl 24576 2 amdttm,amdgpu
kvm_amd 98304 0
drm_kms_helper 184320 1 amdgpu
kvm 663552 1 kvm_amd
i2c_algo_bit 16384 1 amdgpu
ccp 86016 1 kvm_amd
drm 491520 9 drm_kms_helper,amd_sched,amdttm,amdgpu,amdkcl
gpio_amdpt 20480 0
gpio_generic 20480 1 gpio_amdpt
amdgpu 5246976 13
amd_iommu_v2 20480 1 amdgpu
amd_sched 32768 1 amdgpu
amdttm 102400 1 amdgpu
edac_mce_amd 32768 0
amdkcl 24576 2 amdttm,amdgpu
kvm_amd 98304 0
drm_kms_helper 184320 1 amdgpu
kvm 663552 1 kvm_amd
i2c_algo_bit 16384 1 amdgpu
ccp 86016 1 kvm_amd
drm 491520 9 drm_kms_helper,amd_sched,amdttm,amdgpu,amdkcl
gpio_amdpt 20480 0
gpio_generic 20480 1 gpio_amdpt
glxinfo -B | less
ame of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: X.Org (0x1002)
Device: AMD Radeon RX 5700 XT (NAVI10, DRM 3.37.0, 5.4.0-52-generic, LLVM 10.0.0) (0x731f)
Version: 20.0.5
Accelerated: yes
Video memory: 8192MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
VBO free memory - total: 7956 MB, largest block: 7956 MB
VBO free aux. memory - total: 15994 MB, largest block: 15994 MB
Texture free memory - total: 7956 MB, largest block: 7956 MB
Texture free aux. memory - total: 15994 MB, largest block: 15994 MB
Renderbuffer free memory - total: 7956 MB, largest block: 7956 MB
Renderbuffer free aux. memory - total: 15994 MB, largest block: 15994 MB
:
Errors Ubuntu Focal fossa 20.04 RX5700XT Are Disabled
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 1996
- Joined: Sun Mar 22, 2020 5:52 pm
- Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21 - Location: UK
Re: Errors Ubuntu Focal fossa 20.04 RX5700XT Are Disabled
Looks like open required cl drivers not installed ... there are a number of threads that cover this (I am not a linux guru sorry) but most of the time it is the dev drivers that are missing iirc ... I'll see if I can find a thread with the details - the following may help track down the issue:
https://foldingforum.org/viewtopic.php? ... rs#p335622
https://foldingforum.org/viewtopic.php? ... rs#p344091
https://foldingforum.org/viewtopic.php? ... rs#p335622
https://foldingforum.org/viewtopic.php? ... rs#p344091
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)