Page 1 of 1

Full database on 128.252.203.1 and .9?

Posted: Thu Oct 08, 2020 3:28 am
by gs60
Hello,

Looks like there may be some kind of space issue? I figure both servers are feeding the same database and the uploads on both servers stops at 17.29%.

Code: Select all

03:21:47:WU02:FS01:Sending unit results: id:02 state:SEND error:NO_ERROR project:17416 run:0 clone:896 gen:14 core:0x22 unit:0x0000001280fccb095f6ac18df09ed1c6
03:21:47:WU02:FS01:Uploading 20.96MiB to 128.252.203.9
03:21:47:WU02:FS01:Connecting to 128.252.203.9:8080
03:21:53:WU02:FS01:Upload 6.56%
03:21:59:WU02:FS01:Upload 13.71%
03:22:00:WU03:FS00:0xa7:Completed 65000 out of 250000 steps (26%)
03:22:22:WU02:FS01:Upload 17.29%
03:22:22:WARNING:WU02:FS01:Exception: Failed to send results to work server: Transfer failed
03:22:22:WU02:FS01:Trying to send results to collection server
03:22:22:WU02:FS01:Uploading 20.96MiB to 128.252.203.1
03:22:22:WU02:FS01:Connecting to 128.252.203.1:8080
03:22:28:WU02:FS01:Upload 3.28%
03:22:34:WU02:FS01:Upload 7.16%
03:22:40:WU02:FS01:Upload 10.43%
03:22:46:WU02:FS01:Upload 13.42%
03:22:47:WU01:FS01:0x22:Completed 440000 out of 2000000 steps (22%)
03:22:56:WU03:FS00:0xa7:Completed 67500 out of 250000 steps (27%)
03:23:10:WU02:FS01:Upload 17.29%
03:23:10:ERROR:WU02:FS01:Exception: Transfer failed

Re: Full database on 128.252.203.1 and .9?

Posted: Fri Oct 09, 2020 7:47 pm
by gs60
FYI, This issue has resolved its self with about 1 minute left before the wu timeout as 128.252.203.9 accepted it so things may be looking up!

Re: Full database on 128.252.203.1 and .9?

Posted: Fri Oct 16, 2020 10:02 pm
by Yeroon
21:15:38:WU00:FS02:Uploading 10.27MiB to 128.252.203.9
....
21:34:53:WU00:FS02:Upload 92.51%
21:34:53:WARNING:WU00:FS02:Exception: Failed to send results to work server: Transfer failed

I think this is a problem for close to a day now?

Re: Full database on 128.252.203.1 and .9?

Posted: Fri Oct 16, 2020 10:20 pm
by Joe_H
Yeroon wrote:21:15:38:WU00:FS02:Uploading 10.27MiB to 128.252.203.9
....
21:34:53:WU00:FS02:Upload 92.51%
21:34:53:WARNING:WU00:FS02:Exception: Failed to send results to work server: Transfer failed

I think this is a problem for close to a day now?
The server is showing 39 TB of free space and that it was restarted about an hour ago. The WU should upload okay.

Re: Full database on 128.252.203.1 and .9?

Posted: Thu Dec 10, 2020 5:54 pm
by steve391242
I think I have the same problem with that server. I have completed 2 WUs, and they start uploading but get an error before they are completed.

Re: Full database on 128.252.203.1 and .9?

Posted: Thu Dec 10, 2020 6:13 pm
by Joe_H
Which server? The topic refers to two different servers.