Folding Forum

Posted: **Thu Jun 05, 2008 3:08 am**

If this is the wrong area to post this, my apologies.

Ok, i noticed after rebooting my laptop that one of my wu's hasn't been able to upload. The last msg indicated that:

Code: Select all

[02:40:35] - Server does not have record of this unit. Will try again later.
[02:40:35]   Could not transmit unit 04 to Collection server; keeping in queue.


[13:43:37] + Attempting to get work packet
[13:43:37] - Connecting to assignment server
[13:43:38] - Successful: assigned to (171.64.65.65).
[13:43:38] + News From Folding@Home: Welcome to Folding@Home
[13:43:38] Loaded queue successfully.
[13:44:26] + Closed connections
[13:44:26] 
[13:44:26] + Processing work unit
[13:44:26] Core required: FahCore_78.exe
[13:44:26] Core found.
[13:44:26] Working on Unit 04 [June 3 13:44:26]
[13:44:26] + Working ...
[13:44:26] 
[13:44:26] *------------------------------*
[13:44:26] Folding@Home Gromacs Core
[13:44:26] Version 1.90 (March 8, 2006)
[13:44:26] 
[13:44:26] Preparing to commence simulation
[13:44:26] - Looking at optimizations...
[13:44:26] - Created dyn
[13:44:26] - Files status OK
[13:44:37] - Expanded 3868157 -> 20813415 (decompressed 538.0 percent)
[13:44:37] - Starting from initial work packet
[13:44:37] 
[13:44:37] Project: 2611 (Run 0, Clone 197, Gen 82)
[13:44:37] 
[13:44:38] Assembly optimizations on if available.
[13:44:38] Entering M.D.
[13:44:46] Protein: p2611_POPE
[13:44:46] 
[13:44:46] Writing local files
[13:44:52] Extra SSE boost OK.
[13:44:53] Writing local files
[13:44:53] Completed 0 out of 250000 steps  (0)

<snip>

[01:18:40] Completed 250000 out of 250000 steps  (100)
[01:18:40] Writing final coordinates.
[01:18:43] Past main M.D. loop
[01:19:44] 
[01:19:44] Finished Work Unit:
[01:19:44] - Reading up to 3049368 from "work/wudata_04.arc": Read 3049368
[01:19:44] - Reading up to 4364488 from "work/wudata_04.xtc": Read 4364488
[01:19:44] goefile size: 0
[01:19:44] logfile size: 52197
[01:19:44] Leaving Run
[01:19:45] - Writing 7507233 bytes of core data to disk...
[01:19:49] Done: 7506721 -> 6942550 (compressed to 92.4 percent)
[01:19:50]   ... Done.
[01:19:50] - Shutting down core
[01:19:50] 
[01:19:50] Folding@home Core Shutdown: FINISHED_UNIT
[01:19:54] CoreStatus = 64 (100)
[01:19:54] Sending work to server
[01:19:54] - Read packet limit of 540015616... Set to 524286976.


[01:19:54] + Attempting to send results
[01:19:54] - Couldn't send HTTP request to server
[01:19:54] + Could not connect to Work Server (results)
[01:19:54]     (171.64.65.65:8080)
[01:19:54] - Error: Could not transmit unit 04 (completed June 5) to work server.
[01:19:54]   Keeping unit 04 in queue.
[01:19:54] - Read packet limit of 540015616... Set to 524286976.


[01:19:54] + Attempting to send results
[01:19:55] - Couldn't send HTTP request to server
[01:19:55] + Could not connect to Work Server (results)
[01:19:55]     (171.64.65.65:8080)
[01:19:55] - Error: Could not transmit unit 04 (completed June 5) to work server.
[01:19:55] - Read packet limit of 540015616... Set to 524286976.


[01:19:55] + Attempting to send results
[01:19:55] - Couldn't send HTTP request to server
[01:19:55] + Could not connect to Work Server (results)
[01:19:55]     (171.64.122.76:8080)
[01:19:55]   Could not transmit unit 04 to Collection server; keeping in queue.
[01:19:55] - Preparing to get new work unit...
[01:19:55] + Attempting to get work packet
[01:19:55] - Connecting to assignment server
[01:19:56] - Successful: assigned to (171.65.103.160).
[01:19:56] + News From Folding@Home: Welcome to Folding@Home
[01:19:56] Loaded queue successfully.
[01:19:59] - Read packet limit of 540015616... Set to 524286976.


[01:19:59] + Attempting to send results
[01:19:59] - Couldn't send HTTP request to server
[01:19:59] + Could not connect to Work Server (results)
[01:19:59]     (171.64.65.65:8080)
[01:19:59] - Error: Could not transmit unit 04 (completed June 5) to work server.
[01:19:59] - Read packet limit of 540015616... Set to 524286976.


[01:19:59] + Attempting to send results
[01:20:00] - Couldn't send HTTP request to server
[01:20:00] + Could not connect to Work Server (results)
[01:20:00]     (171.64.122.76:8080)
[01:20:00]   Could not transmit unit 04 to Collection server; keeping in queue.
[01:20:00] + Closed connections
[01:20:00] 
[01:20:00] + Processing work unit
[01:20:00] Core required: FahCore_82.exe
[01:20:00] Core found.
[01:20:00] Working on Unit 05 [June 5 01:20:00]
[01:20:00] + Working ...
[01:20:00] 
[01:20:00] *------------------------------*
[01:20:00] Folding@Home PMD Core
[01:20:00] Version 1.03 (September 7, 2005)
[01:20:00] 
[01:20:00] Preparing to commence simulation
[01:20:00] - Looking at optimizations...
[01:20:00] - Created dyn
[01:20:00] - Files status OK
[01:20:01] - Expanded 92987 -> 599777 (decompressed 645.0 percent)
[01:20:01] 
[01:20:01] Project: 2170 (Run 45, Clone 210, Gen 2)
[01:20:01] 
[01:20:01] Assembly optimizations on if available.
[01:20:01] Entering M.D.
[01:20:08] Protein: p2170_lambda_obc_300K
[01:20:08] 
[01:20:08] Completed 0 out of 500000 steps  (0)
[01:35:14] Writing checkpoint files
[01:50:20] Writing checkpoint files
[02:05:34] Writing checkpoint files
[02:10:39] Writing local files
[02:10:39] Completed 5000 out of 500000 steps  (1)
[02:18:04] - Read packet limit of 540015616... Set to 524286976.


[02:18:04] + Attempting to send results
[02:18:05] - Couldn't send HTTP request to server
[02:18:05] + Could not connect to Work Server (results)
[02:18:05]     (171.64.65.65:8080)
[02:18:05] - Error: Could not transmit unit 04 (completed June 5) to work server.
[02:18:05] - Read packet limit of 540015616... Set to 524286976.


[02:18:05] + Attempting to send results
[02:20:15] - Couldn't send HTTP request to server
[02:20:15] + Could not connect to Work Server (results)
[02:20:15]     (171.64.122.76:8080)
[02:20:15]   Could not transmit unit 04 to Collection server; keeping in queue.
[02:22:24] Writing checkpoint files

Folding@Home Client Shutdown.

<snip>

[02:38:36] + Attempting to send results
[02:38:36] Working on Unit 05 [June 5 02:38:36]
[02:38:36] + Working ...
[02:38:37] 
[02:38:37] *------------------------------*
[02:38:37] Folding@Home PMD Core
[02:38:37] Version 1.03 (September 7, 2005)
[02:38:37] 
[02:38:37] Preparing to commence simulation
[02:38:37] - Looking at optimizations...
[02:38:37] - Files status OK
[02:38:37] - Expanded 92987 -> 599777 (decompressed 645.0 percent)
[02:38:37] - Couldn't send HTTP request to server
[02:38:37] + Could not connect to Work Server (results)
[02:38:37]     (171.64.65.65:8080)
[02:38:37] - Error: Could not transmit unit 04 (completed June 5) to work server.
[02:38:37] - Read packet limit of 540015616... Set to 524286976.
[02:38:37] 
[02:38:37] Project: 2170 (Run 45, Clone 210, Gen 2)
[02:38:37] 
[02:38:37] + Attempting to send results
[02:38:38] Assembly optimizations on if available.
[02:38:38] Entering M.D.
[02:38:50] Protein: p2170_lambda_obc_300K
[02:38:50] 
[02:38:50] Completed 5125 out of 500000 steps  (1)
[02:40:35] - Server does not have record of this unit. Will try again later.
[02:40:35]   Could not transmit unit 04 to Collection server; keeping in queue.

Server issues? Wu's getting deleted?

Saleen219

Posted: **Thu Jun 05, 2008 3:21 am**

The server to which your unit 04 WU is trying to return typically has a high net load. That's why it is having trouble uploading. No worries, however, as the client will continue to try to send it at intervals until it returns.

I'm not sure why you are getting the message of no record of the WU as I am not seeing which server is sending that message, work server or collection server, but I'm also not seeing anything about the WU being deleted. As long as it is still in the queue and isn't close to the deadline, just let the client keep trying periodically to send it. The good part is that you have work to do while waiting for that to happen.

Posted: **Thu Jun 05, 2008 3:31 am**

Perhaps this one:

[01:19:55] (171.64.122.76:8080)
[01:19:55] Could not transmit unit 04 to Collection server; keeping in queue.

Common Error Messages #Server does not have record of this unit

Posted: **Thu Jun 05, 2008 3:33 am**

Most likely, yes. Still in queue, still trying to go home, have work to do. All good.

Posted: **Thu Jun 05, 2008 3:35 am**

Yep. No worries. It will go up s00n.

Posted: **Thu Jun 05, 2008 11:46 am**

Welcome to the foldingforum, Saleen219.

1) Has this WU expired? Please run -queueinfo and check the dates.

2) I never remember which of these two numbers is which, but this might indicate the result is bigger than expected. Did you configure your client to accept Big WUs?

Saleen219 wrote:- Read packet limit of 540015616... Set to 524286976.

It may be possible that you need to download and run qfix. (must be run from the CMD prompt and must be in the folding directory). I don't know your level of computer expertise, so if you need more explanation than that, just ask.

Posted: **Fri Jun 06, 2008 1:47 pm**

Bruce:

I forgot to post yesterday morning - when I got up for work I checked to see if there where any changes to that particular wu.

It seems that it had uploaded to the servers during the wee hours of the morning. My assumption would have been that maybe there was a server issue that rectified itself. My apologies for the delay in replying - I didn't get any notice of replies to my OP and I didn't have my laptop at work with me yesterday. (ok i lied, because it was so early, I hit save instead of submit and ran out of time to fix that!)

I do appreciate everyones help on this. If anything - alleviating my worries in itself is a great help.

And thanks for the welcome!

Saleen

Folding Forum

server has no record of my wu [Resolved]

server has no record of my wu [Resolved]

Re: server has no record of my wu

Re: server has no record of my wu

Re: server has no record of my wu

Re: server has no record of my wu

Re: server has no record of my wu

Re: server has no record of my wu