WorkServer connection failed.. No connection could be made

Moderators: Site Moderators, FAHC Science Team

Post Reply
rightarmman
Posts: 13
Joined: Fri Apr 18, 2008 1:49 pm

WorkServer connection failed.. No connection could be made

Post by rightarmman »

Is there a problem here that I can fix?

Code: Select all

09:48:17:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
09:48:18:WARNING:WU00:FS00:Exception: Failed to send results to work server: Failed to connect to 171.64.65.41:80: No connection could be made because the target machine actively refused it.
.
.
.
11:49:44:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
11:49:45:WARNING:WU00:FS00:Exception: Failed to send results to work server: Failed to connect to 171.64.65.41:80: No connection could be made because the target machine actively refused it.
13:05:45:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
13:05:46:WARNING:WU00:FS00:Exception: Failed to send results to work server: Failed to connect to 171.64.65.41:80: No connection could be made because the target machine actively refused it.
******************************* Date: 2016-11-06 *******************************
15:08:44:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
15:08:46:WARNING:WU00:FS00:Exception: Failed to send results to work server: Failed to connect to 171.64.65.41:80: No connection could be made because the target machine actively refused it.
Mod edit: fixed broken Code tag
bollix47
Posts: 2963
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: WorkServer connection failed.. No connection could be m

Post by bollix47 »

Unfortuately there is nothing you can do to rectify this situation.

A message has been sent to the appropriate person but it's still very early on the west coast so I suspect it may be at least an hour or more before they actually see the message and restart the server/job.
rafaug
Posts: 8
Joined: Sat Oct 01, 2016 5:57 pm
Location: United States

Project 11920 (3497, 0, 125) upload IP 0.0.0.0

Post by rafaug »

Merged with existing topic, problem is with the WS and not the WU

I have been experiencing issues with uploading a workunit for project 11920 (3497, 0, 125). FAHControl says that there were 12 attempts at uploading this WU to the server, however it it listed as 0.0.0.0. The timeout for this WU is going to be in a few hours, so I would like to know if there is a workaround or a way to reconfigure the collection IP.

Thanks!
Stephen1R2
Posts: 8
Joined: Sun Nov 06, 2016 8:58 pm
Hardware configuration: ASRock PG Riptide
CPU: 5800X3D
GPU0: RX6800
GPU1: Intel A40 Pro
Contact:

Work server down or my problem?

Post by Stephen1R2 »

Mod note: WS problem, merged post with existing topic - j

this keeps happening today:
Empty work server assignment
20:56:41:WU01:FS00:Connecting to 171.64.65.35:80
20:56:42:WARNING:WU01:FS00:Failed to get assignment from '171.64.65.35:80': Empty work server assignment
20:56:42:ERROR:WU01:FS00:Exception: Could not get an assignment
20:56:42:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:11920 run:1762 clone:1 gen:70 core:0xa7 unit:0x0000005dab4041295809b6720aa07ffd
20:56:42:WU00:FS00:Uploading 7.94MiB to 171.64.65.41
20:56:42:WU00:FS00:Connecting to 171.64.65.41:8080
20:56:43:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
20:56:43:WU00:FS00:Connecting to 171.64.65.41:80
20:56:45:WARNING:WU00:FS00:Exception: Failed to send results to work server: Failed to connect to 171.64.65.41:80: No connection could be made because the target machine actively refused it.
the core x21 is fine so far and working on the 2nd unit of the day.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: WorkServer connection failed.. No connection could be m

Post by bruce »

It's not clear when somebody will be available to restart 171.64.65.41. The WU that's trying to upload will continue to retry and there's really no point in worrying about it. Since the server is down, you won't be assigned any more WUs from that project. Work should continue since your client should get other WUs from other servers.

No, you cannot configure a Collection Server. The project owner needs to do that.
absolutefunk
Posts: 22
Joined: Mon Mar 10, 2014 1:41 am

Re: WorkServer connection failed.. No connection could be m

Post by absolutefunk »

The affected project(s) require a quick return, and all the completed WUs I had sitting in the queue have since been dumped due to timeout. I havn't checked to see if the affected server is back online, but I havn't received any WUs from the affected project(s) since the initial outage (which isn't a huge issue as there are plenty of WUs from other projects to fold).
Post Reply