Dedicated Folding@Home Build - Advice?
Posted: Sat Apr 18, 2015 11:35 am
Hello all
I've just upgraded my main PC's GPU to a GTX 660 so I have a spare GTX 650. I'm in the process of building a little server room and I thought why not put the 650 to use!
So I've purchased an extremely cheap desktop (HP DX2300) with a Pentium Dual Core 1.8Ghz, 1GB RAM, 160GB HDD and of course the all important PCI-E slot.
Now, here's my question. The CPU use's 65W when maxed out. Usually when I run the 650 on my i3 PC one of the cores is maxed out at 100% I guess to process work for the GPU??? Anyway. Electric prices here are pretty high so I want to try and save as much as i can without harming the GPU performance. I've noticed there are Celerons between 1.6ghz - 2.0ghz which use only 35W and have the same FSB speed as my Pentium dual (800mhz).
Could i get away with putting one of those into this machine without effecting GPU performance? I hear the 650 does just over 10k PPD normally so I want to keep it at that sort of rate.
Will a Celeron be ok for this? Also for anyone who may know.. with only 1GB RAM which would be the best OS to use with this machine? I am Linux and Windows friendly so anything goes really? Whatever will give the best performance with the very limited RAM that i have.
Thanks in advance for any help.
I've just upgraded my main PC's GPU to a GTX 660 so I have a spare GTX 650. I'm in the process of building a little server room and I thought why not put the 650 to use!
So I've purchased an extremely cheap desktop (HP DX2300) with a Pentium Dual Core 1.8Ghz, 1GB RAM, 160GB HDD and of course the all important PCI-E slot.
Now, here's my question. The CPU use's 65W when maxed out. Usually when I run the 650 on my i3 PC one of the cores is maxed out at 100% I guess to process work for the GPU??? Anyway. Electric prices here are pretty high so I want to try and save as much as i can without harming the GPU performance. I've noticed there are Celerons between 1.6ghz - 2.0ghz which use only 35W and have the same FSB speed as my Pentium dual (800mhz).
Could i get away with putting one of those into this machine without effecting GPU performance? I hear the 650 does just over 10k PPD normally so I want to keep it at that sort of rate.
Will a Celeron be ok for this? Also for anyone who may know.. with only 1GB RAM which would be the best OS to use with this machine? I am Linux and Windows friendly so anything goes really? Whatever will give the best performance with the very limited RAM that i have.
Thanks in advance for any help.