Page 1 of 1

Project: 3052 (Run 2, Clone 96, Gen 1) EUE

Posted: Sat Apr 19, 2008 5:20 pm
by MoneyGuyBK
For the first time ever I had an EUE at 58%
Should I watch this and stop it at 57% or something and restart or should I dump it ???
TIA

Peace

Code: Select all

[18:57:57] Finished Work Unit:
[18:57:57] - Reading up to 232392 from "work/wudata_02.arc": Read 232392
[18:57:57] - Reading up to 13678216 from "work/wudata_02.xtc": Read 13678216
[18:57:58] goefile size: 0
[18:57:58] logfile size: 265306
[18:57:58] Leaving Run
[18:58:00] - Writing 14575278 bytes of core data to disk...
[18:58:01]   ... Done.
[18:58:01] - Failed to delete work/wudata_02.sas
[18:58:01] - Failed to delete work/wudata_02.goe
[18:58:01] Warning:  check for stray files
[18:58:01] - Shutting down core
[19:00:01] 
[19:00:01] Folding@home Core Shutdown: FINISHED_UNIT
[19:00:01] 
[19:00:01] Folding@home Core Shutdown: FINISHED_UNIT
[19:00:05] CoreStatus = 64 (100)
[19:00:05] Sending work to server


[19:00:05] + Attempting to send results
[19:04:07] + Results successfully sent
[19:04:07] Thank you for your contribution to Folding@Home.
[19:04:08] + Number of Units Completed: 112

[19:06:12] - Preparing to get new work unit...
[19:06:12] + Attempting to get work packet
[19:06:12] - Connecting to assignment server
[19:06:12] - Successful: assigned to (171.64.65.63).
[19:06:12] + News From Folding@Home: Welcome to Folding@Home
[19:06:12] Loaded queue successfully.
[19:06:13] + Closed connections
[19:06:13] 
[19:06:13] + Processing work unit
[19:06:13] Core required: FahCore_a1.exe
[19:06:13] Core found.
[19:06:13] Working on Unit 03 [April 18 19:06:13]
[19:06:13] + Working ...
[19:06:13] 
[19:06:13] *------------------------------*
[19:06:13] Folding@Home Gromacs SMP Core
[19:06:13] Version 1.74 (March 10, 2007)
[19:06:13] 
[19:06:13] Preparing to commence simulation
[19:06:13] - Ensuring status. Please wait.
[19:06:14] - Starting from initial work packet
[19:06:14] 
[19:06:14] Project: 3052 (Run 2, Clone 96, Gen 1)
[19:06:14] 
[19:06:14] Assembly optimizations on if available.
[19:06:14] Entering M.D.
[19:06:31] .8 percent)
[19:06:31] - Starting from initial work packet
[19:06:31] 
[19:06:31] Project: Entering M.D.
[19:06:31] lone 96, Gen 1)
[19:06:31] 
[19:06:31] Entering M.D.
[19:06:37] Protein: 9660 p3029_SMP-emsv-03
[19:06:37] Writing local files
[19:06:37] Extra SSE boost OK.
[19:06:37] 
[19:06:37] Extra SSE boost OK.
[19:06:37] Writing local files
[19:06:37] Completed 0 out of 10000000 steps  (0 percent)
[19:27:46] Writing local files
[19:27:46] Completed 100000 out of 10000000 steps  (1 percent)
[19:49:16] Writing local files
[19:49:16] Completed 200000 out of 10000000 steps  (2 percent)
[20:10:47] Writing local files
[20:10:47] Completed 300000 out of 10000000 steps  (3 percent)
[20:32:20] Writing local files
[20:32:20] Completed 400000 out of 10000000 steps  (4 percent)
[20:53:52] Writing local files
[20:53:52] Completed 500000 out of 10000000 steps  (5 percent)
[21:15:25] Writing local files
[21:15:25] Completed 600000 out of 10000000 steps  (6 percent)
[21:37:00] Writing local files
[21:37:00] Completed 700000 out of 10000000 steps  (7 percent)
[21:58:31] Writing local files
[21:58:31] Completed 800000 out of 10000000 steps  (8 percent)
[22:20:03] Writing local files
[22:20:03] Completed 900000 out of 10000000 steps  (9 percent)
[22:41:35] Writing local files
[22:41:35] Completed 1000000 out of 10000000 steps  (10 percent)
[23:03:06] Writing local files
[23:03:06] Completed 1100000 out of 10000000 steps  (11 percent)
[23:24:37] Writing local files
[23:24:37] Completed 1200000 out of 10000000 steps  (12 percent)
[23:46:16] Writing local files
[23:46:16] Completed 1300000 out of 10000000 steps  (13 percent)
[00:07:49] Writing local files
[00:07:49] Completed 1400000 out of 10000000 steps  (14 percent)
[00:29:21] Writing local files
[00:29:21] Completed 1500000 out of 10000000 steps  (15 percent)
[00:50:54] Writing local files
[00:50:54] Completed 1600000 out of 10000000 steps  (16 percent)
[01:12:36] Writing local files
[01:12:36] Completed 1700000 out of 10000000 steps  (17 percent)
[01:34:10] Writing local files
[01:34:10] Completed 1800000 out of 10000000 steps  (18 percent)
[01:55:45] Writing local files
[01:55:45] Completed 1900000 out of 10000000 steps  (19 percent)
[02:17:19] Writing local files
[02:17:19] Completed 2000000 out of 10000000 steps  (20 percent)
[02:38:54] Writing local files
[02:38:54] Completed 2100000 out of 10000000 steps  (21 percent)
[03:00:28] Writing local files
[03:00:28] Completed 2200000 out of 10000000 steps  (22 percent)
[03:22:01] Writing local files
[03:22:01] Completed 2300000 out of 10000000 steps  (23 percent)
[03:43:34] Writing local files
[03:43:34] Completed 2400000 out of 10000000 steps  (24 percent)
[04:05:05] Writing local files
[04:05:05] Completed 2500000 out of 10000000 steps  (25 percent)
[04:26:39] Writing local files
[04:26:39] Completed 2600000 out of 10000000 steps  (26 percent)
[04:48:10] Writing local files
[04:48:10] Completed 2700000 out of 10000000 steps  (27 percent)
[05:10:21] Writing local files
[05:10:21] Completed 2800000 out of 10000000 steps  (28 percent)
[05:31:56] Writing local files
[05:31:56] Completed 2900000 out of 10000000 steps  (29 percent)
[05:53:30] Writing local files
[05:53:30] Completed 3000000 out of 10000000 steps  (30 percent)
[06:15:15] Writing local files
[06:15:15] Completed 3100000 out of 10000000 steps  (31 percent)
[06:36:55] Writing local files
[06:36:55] Completed 3200000 out of 10000000 steps  (32 percent)
[06:58:33] Writing local files
[06:58:33] Completed 3300000 out of 10000000 steps  (33 percent)
[07:20:12] Writing local files
[07:20:12] Completed 3400000 out of 10000000 steps  (34 percent)
[07:41:51] Writing local files
[07:41:51] Completed 3500000 out of 10000000 steps  (35 percent)
[08:03:27] Writing local files
[08:03:27] Completed 3600000 out of 10000000 steps  (36 percent)
[08:25:05] Writing local files
[08:25:05] Completed 3700000 out of 10000000 steps  (37 percent)
[08:46:45] Writing local files
[08:46:45] Completed 3800000 out of 10000000 steps  (38 percent)
[09:10:56] Writing local files
[09:10:56] Completed 3900000 out of 10000000 steps  (39 percent)
[09:32:36] Writing local files
[09:32:36] Completed 4000000 out of 10000000 steps  (40 percent)
[09:54:25] Writing local files
[09:54:25] Completed 4100000 out of 10000000 steps  (41 percent)
[10:16:06] Writing local files
[10:16:06] Completed 4200000 out of 10000000 steps  (42 percent)
[10:37:46] Writing local files
[10:37:46] Completed 4300000 out of 10000000 steps  (43 percent)
[10:59:26] Writing local files
[10:59:26] Completed 4400000 out of 10000000 steps  (44 percent)
[11:21:05] Writing local files
[11:21:05] Completed 4500000 out of 10000000 steps  (45 percent)
[11:42:45] Writing local files
[11:42:45] Completed 4600000 out of 10000000 steps  (46 percent)
[12:04:27] Writing local files
[12:04:27] Completed 4700000 out of 10000000 steps  (47 percent)
[12:26:08] Writing local files
[12:26:08] Completed 4800000 out of 10000000 steps  (48 percent)
[12:47:49] Writing local files
[12:47:49] Completed 4900000 out of 10000000 steps  (49 percent)
[13:09:29] Writing local files
[13:09:29] Completed 5000000 out of 10000000 steps  (50 percent)
[13:31:10] Writing local files
[13:31:10] Completed 5100000 out of 10000000 steps  (51 percent)
[13:52:51] Writing local files
[13:52:51] Completed 5200000 out of 10000000 steps  (52 percent)
[14:14:30] Writing local files
[14:14:30] Completed 5300000 out of 10000000 steps  (53 percent)
[14:36:09] Writing local files
[14:36:09] Completed 5400000 out of 10000000 steps  (54 percent)
[14:57:49] Writing local files
[14:57:49] Completed 5500000 out of 10000000 steps  (55 percent)
[15:19:30] Writing local files
[15:19:30] Completed 5600000 out of 10000000 steps  (56 percent)
[15:41:10] Writing local files
[15:41:10] Completed 5700000 out of 10000000 steps  (57 percent)
[16:03:01] Writing local files
[16:03:01] Completed 5800000 out of 10000000 steps  (58 percent)
[16:11:30] Warning:  long 1-4 interactions
[16:11:30] Gromacs cannot continue further.
[16:11:30] Going to send back what have done.
[16:11:30] logfile size: 153663
[16:11:30] - Writing 154199 bytes of core data to disk...
[16:11:30]   ... Done.
[16:11:30] - Failed to delete work/wudata_03.sas
[16:11:30] - Failed to delete work/wudata_03.goe
[16:11:30] Warning:  check for stray files
[16:13:30] 
[16:13:30] Folding@home Core Shutdown: EARLY_UNIT_END
[16:13:30] 
[16:13:30] Folding@home Core Shutdown: EARLY_UNIT_END
[16:13:33] CoreStatus = 7B (123)
[16:13:33] Client-core communications error: ERROR 0x7b
[16:13:33] Deleting current work unit & continuing...
[16:15:37] - Preparing to get new work unit...
[16:15:37] + Attempting to get work packet
[16:15:37] - Connecting to assignment server
[16:15:38] - Successful: assigned to (0.0.0.0).
[16:15:38] + News From Folding@Home: Welcome to Folding@Home
[16:15:38] Work Unit has an invalid address.
[16:15:38] - Error: Attempt #1  to get work failed, and no other work to do.
             Waiting before retry.
[16:15:44] + Attempting to get work packet
[16:15:44] - Connecting to assignment server
[16:15:44] - Successful: assigned to (0.0.0.0).
[16:15:44] + News From Folding@Home: Welcome to Folding@Home
[16:15:44] Work Unit has an invalid address.
[16:15:44] - Error: Attempt #2  to get work failed, and no other work to do.
             Waiting before retry.
[16:16:05] + Attempting to get work packet
[16:16:05] - Connecting to assignment server
[16:16:05] - Successful: assigned to (0.0.0.0).
[16:16:05] + News From Folding@Home: Welcome to Folding@Home
[16:16:05] Work Unit has an invalid address.
[16:16:05] - Error: Attempt #3  to get work failed, and no other work to do.
             Waiting before retry.
[16:16:33] + Attempting to get work packet
[16:16:33] - Connecting to assignment server
[16:16:33] - Successful: assigned to (0.0.0.0).
[16:16:33] + News From Folding@Home: Welcome to Folding@Home
[16:16:33] Work Unit has an invalid address.
[16:16:33] - Error: Attempt #4  to get work failed, and no other work to do.
             Waiting before retry.
[16:17:19] + Attempting to get work packet
[16:17:19] - Connecting to assignment server
[16:17:19] - Successful: assigned to (0.0.0.0).
[16:17:19] + News From Folding@Home: Welcome to Folding@Home
[16:17:19] Work Unit has an invalid address.
[16:17:19] - Error: Attempt #5  to get work failed, and no other work to do.
             Waiting before retry.
[16:18:43] + Attempting to get work packet
[16:18:43] - Connecting to assignment server
[16:18:44] - Successful: assigned to (0.0.0.0).
[16:18:44] + News From Folding@Home: Welcome to Folding@Home
[16:18:44] Work Unit has an invalid address.
[16:18:44] - Error: Attempt #6  to get work failed, and no other work to do.
             Waiting before retry.
[16:21:35] + Attempting to get work packet
[16:21:35] - Connecting to assignment server
[16:21:36] - Successful: assigned to (0.0.0.0).
[16:21:36] + News From Folding@Home: Welcome to Folding@Home
[16:21:36] Work Unit has an invalid address.
[16:21:36] - Error: Attempt #7  to get work failed, and no other work to do.
             Waiting before retry.
[16:27:06] + Attempting to get work packet
[16:27:06] - Connecting to assignment server
[16:27:06] - Successful: assigned to (171.64.65.63).
[16:27:06] + News From Folding@Home: Welcome to Folding@Home
[16:27:06] Loaded queue successfully.
[16:27:07] + Closed connections
[16:27:12] 
[16:27:12] + Processing work unit
[16:27:12] Core required: FahCore_a1.exe
[16:27:12] Core found.
[16:27:12] Working on Unit 04 [April 19 16:27:12]
[16:27:12] + Working ...
[16:27:13] 
[16:27:13] *------------------------------*
[16:27:13] Folding@Home Gromacs SMP Core
[16:27:13] Version 1.74 (March 10, 2007)
[16:27:13] 
[16:27:13] Preparing to commence simulation
[16:27:13] - Ensuring status. Please wait.
[16:27:13] - Starting from initial work packet
[16:27:13] 
[16:27:13] Project: 3052 (Run 2, Clone 96, Gen 1)
[16:27:13] 
[16:27:13] Assembly optimizations on if available.
[16:27:13] Entering M.D.
[16:27:30] .8 percent)
[16:27:30] - Starting from initial work packet
[16:27:30] 
[16:27:30] Project: Entering M.D.
[16:27:30] lone 96, Gen 1)
[16:27:30] 
[16:27:30] Entering M.D.
[16:27:36] 
[16:27:36] Writing local files
[16:27:36] Extra SSE boost OK.
[16:27:36] SMP-emsv-03Extra SSE boost OK.
[16:27:36] 
[16:27:36] Extra SSE boost OK.
[16:27:36] Writing local files
[16:27:36] Completed 0 out of 10000000 steps  (0 percent)
[16:48:58] Writing local files
[16:48:58] Completed 100000 out of 10000000 steps  (1 percent)
[17:10:36] Writing local files
[17:10:36] Completed 200000 out of 10000000 steps  (2 percent)

Re: 3052 (2, 96, 1) EUE

Posted: Sat Apr 19, 2008 9:08 pm
by toTOW
You might try this : viewtopic.php?f=8&t=191 ;)

Re: 3052 (2, 96, 1) EUE

Posted: Sat Apr 19, 2008 9:45 pm
by anandhanju
If I were you, I'd do the wait until 57%, stop and start thingy. If it fails again, then I'd attempt to send in the partial result as per toTOW's suggestion.

The thing about sending partial results is that if you send it now (assuming the result file is still present) and get partial credit, and then manage to finish the same WU, you will NOT get full credit. I reckon it gets treated as a duplicate which in a way it is.

Re: 3052 (2, 96, 1) EUE

Posted: Sun Apr 20, 2008 3:43 am
by MoneyGuyBK
Thanx to both of you for the timely responses.
I suppose then that there is no issue reported with this particular WU.
I was wondering, That's all.

I have also noticed that Stanford must be in hard need of 3xxx Projects.... as THAT is all I am getting on my machines.
I have not had a 2653 and 2605 lately.



Peace

Re: 3052 (2, 96, 1) EUE

Posted: Sun Apr 20, 2008 4:44 am
by anandhanju
MoneyGuyBK wrote:...I suppose then that there is no issue reported with this particular WU.
Only a moderator or a site admin can confirm that :wink:

Re: Project: 3052 (Run 2, Clone 96, Gen 1) EUE

Posted: Sun Apr 20, 2008 5:50 pm
by MoneyGuyBK
Just to note.....
I stopped the WU last night before going to bed... at 44% progress (Could not stay up to 56% ;))
Restarted it and went to bed.....
Happy to report there was no EUE.... and the WU was at over 60% when I got up this morning.
[keeping fingers crossed] hope this means all is well!!!


Peace