Page 1 of 2
Post issues with Project 7620 or 7621 points here [Resolved]
Posted: Thu Oct 27, 2011 7:34 pm
by Xavier Zepherious
Im not the only one this morning
since there is two of us at about the same time I suspect an issue here
mine was 8:57am
5187 pointers not appearing to be credited
http://www.evga.com/forums/fb.ashx?m=1293951
http://www.evga.com/forums/fb.ashx?m=1294016
Re: posted wu and no credit
Posted: Thu Oct 27, 2011 7:50 pm
by Macaholic
Could you please post a snippet from the log file (FAHlog.txt) you suspect contains the missing unit(s). Be sure it contains the project number along with the run, clone, and generation numbers. Server address would be nice too. That will help us with troubleshooting and determining if the units have been properly credited. Thanks.
Re: posted wu and no credit
Posted: Thu Oct 27, 2011 8:11 pm
by Xavier Zepherious
I wish I had a sample
not a failed WU... (which I have logs of every one) - have't had a failed WU since AUG
(I just selected to save Complete units Logs because of this)
I uploaded the unit at 8:57:28 MST
I didn't keep completed Units
I don't know if the other person did either
I can give you current WU and server
Code: Select all
[14:57:29] Initial: 40AB; - Successful: assigned to (171.64.65.105).
[14:57:29] + News From Folding@Home: Welcome to Folding@Home
[14:57:29] Loaded queue successfully.
[14:57:29] Gpu type=3 species=30.
[14:57:29] Sent data
[14:57:29] Connecting to http://171.64.65.105:8080/
[14:57:29] Posted data.
[14:57:29] Initial: 0000; - Receiving payload (expected size: 125097)
[14:57:29] Conversation time very short, giving reduced weight in bandwidth avg
[14:57:29] - Downloaded at ~244 kB/s
[14:57:29] - Averaged speed for that direction ~244 kB/s
[14:57:29] + Received work.
[14:57:29] + Closed connections
[14:57:29]
[14:57:29] + Processing work unit
[14:57:29] Core required: FahCore_15.exe
[14:57:29] Core found.
[14:57:29] Working on queue slot 01 [October 27 14:57:29 UTC]
[14:57:29] + Working ...
[14:57:29] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -nocpulock -checkpoint 3 -verbose -lifeline 16884 -version 630'
[14:57:29]
[14:57:29] *------------------------------*
[14:57:29] Folding@Home GPU Core
[14:57:29] Version 2.20 (Tue Aug 2 12:06:37 PDT 2011)
[14:57:29] Build host SimbiosNvdWin7
[14:57:29] Board Type NVIDIA/CUDA
[14:57:29] Core 15
[14:57:29]
[14:57:29] Window's signal control handler registered.
[14:57:29] Preparing to commence simulation
[14:57:29] - Looking at optimizations...
[14:57:29] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[14:57:29] - Created dyn
[14:57:29] - Files status OK
[14:57:29] sizeof(CORE_PACKET_HDR) = 512 file=<>
[14:57:30] - Expanded 124585 -> 501826 (decompressed 402.7 percent)
[14:57:30] Called DecompressByteArray: compressed_data_size=124585 data_size=501826, decompressed_data_size=501826 diff=0
[14:57:30] - Digital signature verified
[14:57:30]
[14:57:30] Project: 7620 (Run 387, Clone 0, Gen 46)
Next time I'll have the completed log if it happens
The reason I posted was so you could check servers
not that Im trying to get lost points...if I lost them it's fine
Mod edit - added code tags
Re: posted wu and no credit
Posted: Thu Oct 27, 2011 11:07 pm
by Zagen30
You sure you don't still have the log? If you completed it today, and you haven't been restarting the client a lot, the log should still be there. v6 keeps the current one (FAHlog.txt) going as long as you don't close the client, and it then gets renamed as FAHlog-Prev.txt and retained until the more current one is large enough to be archived and the client gets closed again. v7 keeps several day's worth of logs around.
I'm afraid there's not a whole lot the mods can do without the PRCG numbers. They can check your most recently completed WU, but if you've returned something else since the ones that seem to have gone uncredited they can't see beyond the latest one.
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 12:44 am
by Xavier Zepherious
I don't ...use FAH gpu tracker V2
however the other user does
he used the same server - didn't get points
WILLYRAY ------------------- his stuff below
Signed up for an account and tried posting it twice ... so you may see some newbie tracks of mine over at that forum
Just so you all can get the information, here's a snippet from the log file:
[13:38:19] Project: 7620 (Run 797, Clone 0, Gen 70)
[13:38:19] - Read packet limit of 540015616... Set to 524286976.
[13:38:19] + Attempting to send results [October 27 13:38:19 UTC]
[13:38:19] - Reading file work/wuresults_01.dat from core
[13:38:19] (Read 819540 bytes from disk)
[13:38:19] Gpu type=3 species=30.
[13:38:19] Connecting to
http://171.64.65.105:8080/
[13:38:25] Posted data.
[13:38:25] Initial: 0000; - Uploaded at ~133 kB/s
[13:38:25] - Averaged speed for that direction ~133 kB/s
[13:38:25] + Results successfully sent
[13:38:25] Thank you for your contribution to [link=mailto:Folding@Home]Folding@Home[/link].
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 12:49 am
by Xavier Zepherious
PS: I haven't seen points for the next one either
finished at 5:11
I just checked the stats page it's not there yet 1 hr later
I have the log for that. no errors
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 1:13 am
by Xavier Zepherious
Heres the log file of the one at 5:11MST
it's now 7:11 MST and no points
Code: Select all
[14:57:28] Could not open work queue, generating new queue...
[14:57:28] - Preparing to get new work unit...
[14:57:28] - Autosending finished units... [October 27 14:57:28 UTC]
[14:57:28] Cleaning up work directory
[14:57:28] Trying to send all finished work units
[14:57:28] + No unsent completed units remaining.
[14:57:28] - Autosend completed
[14:57:28] + Attempting to get work packet
[14:57:28] Passkey found
[14:57:28] - Will indicate memory of 4094 MB
[14:57:28] Gpu type=3 species=30.
[14:57:28] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[14:57:28] - Connecting to assignment server
[14:57:28] Connecting to http://assign-GPU.stanford.edu:8080/
[14:57:29] Posted data.
[14:57:29] Initial: 40AB; - Successful: assigned to (171.64.65.105).
[14:57:29] + News From Folding@Home: Welcome to Folding@Home
[14:57:29] Loaded queue successfully.
[14:57:29] Gpu type=3 species=30.
[14:57:29] Sent data
[14:57:29] Connecting to http://171.64.65.105:8080/
[14:57:29] Posted data.
[14:57:29] Initial: 0000; - Receiving payload (expected size: 125097)
[14:57:29] Conversation time very short, giving reduced weight in bandwidth avg
[14:57:29] - Downloaded at ~244 kB/s
[14:57:29] - Averaged speed for that direction ~244 kB/s
[14:57:29] + Received work.
[14:57:29] + Closed connections
[14:57:29]
[14:57:29] + Processing work unit
[14:57:29] Core required: FahCore_15.exe
[14:57:29] Core found.
[14:57:29] Working on queue slot 01 [October 27 14:57:29 UTC]
[14:57:29] + Working ...
[14:57:29] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -nocpulock -checkpoint 3 -verbose -lifeline 16884 -version 630'
[14:57:29]
[14:57:29] *------------------------------*
[14:57:29] Folding@Home GPU Core
[14:57:29] Version 2.20 (Tue Aug 2 12:06:37 PDT 2011)
[14:57:29] Build host SimbiosNvdWin7
[14:57:29] Board Type NVIDIA/CUDA
[14:57:29] Core 15
[14:57:29]
[14:57:29] Window's signal control handler registered.
[14:57:29] Preparing to commence simulation
[14:57:29] - Looking at optimizations...
[14:57:29] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[14:57:29] - Created dyn
[14:57:29] - Files status OK
[14:57:29] sizeof(CORE_PACKET_HDR) = 512 file=<>
[14:57:30] - Expanded 124585 -> 501826 (decompressed 402.7 percent)
[14:57:30] Called DecompressByteArray: compressed_data_size=124585 data_size=501826, decompressed_data_size=501826 diff=0
[14:57:30] - Digital signature verified
[14:57:30]
[14:57:30] Project: 7620 (Run 387, Clone 0, Gen 46)
[14:57:30]
[14:57:30] Assembly optimizations on if available.
[14:57:30] Entering M.D.
[14:57:32] Tpr hash work/wudata_01.tpr: 3026582797 146979024 2350487081 1724542826 51681914
[14:57:32] calling fah_main gpuDeviceId=0
[14:57:32] Working on Protein
[14:57:32] Client config found, loading data.
[14:57:32] Starting GUI Server
[14:58:35] Setting checkpoint frequency: 400000
[14:58:35] Completed 3 out of 40000000 steps (0%).
[15:03:29] Completed 400000 out of 40000000 steps (1%).
[15:08:23] Completed 800000 out of 40000000 steps (2%).
[15:13:18] Completed 1200000 out of 40000000 steps (3%).
[15:18:12] Completed 1600000 out of 40000000 steps (4%).
[15:23:06] Completed 2000000 out of 40000000 steps (5%).
[15:28:00] Completed 2400000 out of 40000000 steps (6%).
[15:32:55] Completed 2800000 out of 40000000 steps (7%).
[15:37:50] Completed 3200000 out of 40000000 steps (8%).
[15:42:46] Completed 3600000 out of 40000000 steps (9%).
[15:47:45] Completed 4000000 out of 40000000 steps (10%).
[15:52:45] Completed 4400000 out of 40000000 steps (11%).
[15:57:41] Completed 4800000 out of 40000000 steps (12%).
[16:02:43] Completed 5200000 out of 40000000 steps (13%).
[16:07:43] Completed 5600000 out of 40000000 steps (14%).
[16:12:42] Completed 6000000 out of 40000000 steps (15%).
[16:17:42] Completed 6400000 out of 40000000 steps (16%).
[16:22:43] Completed 6800000 out of 40000000 steps (17%).
[16:27:44] Completed 7200000 out of 40000000 steps (18%).
[16:32:44] Completed 7600000 out of 40000000 steps (19%).
[16:37:41] Completed 8000000 out of 40000000 steps (20%).
[16:42:41] Completed 8400000 out of 40000000 steps (21%).
[16:47:44] Completed 8800000 out of 40000000 steps (22%).
[16:52:39] Completed 9200000 out of 40000000 steps (23%).
[16:57:33] Completed 9600000 out of 40000000 steps (24%).
[17:02:27] Completed 10000000 out of 40000000 steps (25%).
[17:07:24] Completed 10400000 out of 40000000 steps (26%).
[17:12:18] Completed 10800000 out of 40000000 steps (27%).
[17:17:12] Completed 11200000 out of 40000000 steps (28%).
[17:22:06] Completed 11600000 out of 40000000 steps (29%).
[17:26:59] Completed 12000000 out of 40000000 steps (30%).
[17:31:53] Completed 12400000 out of 40000000 steps (31%).
[17:36:47] Completed 12800000 out of 40000000 steps (32%).
[17:41:41] Completed 13200000 out of 40000000 steps (33%).
[17:46:34] Completed 13600000 out of 40000000 steps (34%).
[17:51:28] Completed 14000000 out of 40000000 steps (35%).
[17:56:22] Completed 14400000 out of 40000000 steps (36%).
[18:01:15] Completed 14800000 out of 40000000 steps (37%).
[18:06:09] Completed 15200000 out of 40000000 steps (38%).
[18:11:02] Completed 15600000 out of 40000000 steps (39%).
[18:15:56] Completed 16000000 out of 40000000 steps (40%).
[18:20:51] Completed 16400000 out of 40000000 steps (41%).
[18:25:45] Completed 16800000 out of 40000000 steps (42%).
[18:30:39] Completed 17200000 out of 40000000 steps (43%).
[18:35:33] Completed 17600000 out of 40000000 steps (44%).
[18:40:31] Completed 18000000 out of 40000000 steps (45%).
[18:45:26] Completed 18400000 out of 40000000 steps (46%).
[18:50:20] Completed 18800000 out of 40000000 steps (47%).
[18:55:15] Completed 19200000 out of 40000000 steps (48%).
[19:00:11] Completed 19600000 out of 40000000 steps (49%).
[19:05:06] Completed 20000000 out of 40000000 steps (50%).
[19:10:01] Completed 20400000 out of 40000000 steps (51%).
[19:14:57] Completed 20800000 out of 40000000 steps (52%).
[19:19:51] Completed 21200000 out of 40000000 steps (53%).
[19:24:47] Completed 21600000 out of 40000000 steps (54%).
[19:29:41] Completed 22000000 out of 40000000 steps (55%).
[19:34:37] Completed 22400000 out of 40000000 steps (56%).
[19:39:32] Completed 22800000 out of 40000000 steps (57%).
[19:44:27] Completed 23200000 out of 40000000 steps (58%).
[19:49:21] Completed 23600000 out of 40000000 steps (59%).
[19:54:16] Completed 24000000 out of 40000000 steps (60%).
[19:59:10] Completed 24400000 out of 40000000 steps (61%).
[20:04:04] Completed 24800000 out of 40000000 steps (62%).
[20:09:00] Completed 25200000 out of 40000000 steps (63%).
[20:13:55] Completed 25600000 out of 40000000 steps (64%).
[20:18:50] Completed 26000000 out of 40000000 steps (65%).
[20:23:44] Completed 26400000 out of 40000000 steps (66%).
[20:28:38] Completed 26800000 out of 40000000 steps (67%).
[20:33:33] Completed 27200000 out of 40000000 steps (68%).
[20:38:28] Completed 27600000 out of 40000000 steps (69%).
[20:43:22] Completed 28000000 out of 40000000 steps (70%).
[20:48:16] Completed 28400000 out of 40000000 steps (71%).
[20:53:09] Completed 28800000 out of 40000000 steps (72%).
[20:57:28] - Autosending finished units... [October 27 20:57:28 UTC]
[20:57:28] Trying to send all finished work units
[20:57:28] + No unsent completed units remaining.
[20:57:28] - Autosend completed
[20:58:03] Completed 29200000 out of 40000000 steps (73%).
[21:02:59] Completed 29600000 out of 40000000 steps (74%).
[21:07:53] Completed 30000000 out of 40000000 steps (75%).
[21:12:47] Completed 30400000 out of 40000000 steps (76%).
[21:17:41] Completed 30800000 out of 40000000 steps (77%).
[21:22:36] Completed 31200000 out of 40000000 steps (78%).
[21:27:30] Completed 31600000 out of 40000000 steps (79%).
[21:32:25] Completed 32000000 out of 40000000 steps (80%).
[21:37:20] Completed 32400000 out of 40000000 steps (81%).
[21:42:15] Completed 32800000 out of 40000000 steps (82%).
[21:47:10] Completed 33200000 out of 40000000 steps (83%).
[21:52:06] Completed 33600000 out of 40000000 steps (84%).
[21:57:00] Completed 34000000 out of 40000000 steps (85%).
[22:01:55] Completed 34400000 out of 40000000 steps (86%).
[22:06:50] Completed 34800000 out of 40000000 steps (87%).
[22:11:47] Completed 35200000 out of 40000000 steps (88%).
[22:16:41] Completed 35600000 out of 40000000 steps (89%).
[22:21:34] Completed 36000000 out of 40000000 steps (90%).
[22:26:28] Completed 36400000 out of 40000000 steps (91%).
[22:31:23] Completed 36800000 out of 40000000 steps (92%).
[22:36:16] Completed 37200000 out of 40000000 steps (93%).
[22:41:10] Completed 37600000 out of 40000000 steps (94%).
[22:46:04] Completed 38000000 out of 40000000 steps (95%).
[22:50:58] Completed 38400000 out of 40000000 steps (96%).
[22:55:52] Completed 38800000 out of 40000000 steps (97%).
[23:00:45] Completed 39200000 out of 40000000 steps (98%).
[23:05:40] Completed 39600000 out of 40000000 steps (99%).
[23:10:35] Completed 40000000 out of 40000000 steps (100%).
[23:10:37] Finished fah_main status=0
[23:10:37] Successful run
[23:10:37] DynamicWrapper: Finished Work Unit: sleep=10000
[23:10:47] Reserved 760000 bytes for xtc file; Cosm status=0
[23:10:47] Allocated 760000 bytes for xtc file
[23:10:47] - Reading up to 760000 from "work/wudata_01.xtc": Read 760000
[23:10:47] Read 760000 bytes from xtc file; available packet space=785670464
[23:10:47] xtc file hash check passed.
[23:10:47] Reserved 47688 47688 785670464 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[23:10:47] Allocated 47688 bytes for arc file
[23:10:47] - Reading up to 47688 from "work/wudata_01.trr": Read 47688
[23:10:47] Read 47688 bytes from arc file; available packet space=785622776
[23:10:47] trr file hash check passed.
[23:10:47] Allocated 544 bytes for edr file
[23:10:47] Read bedfile
[23:10:47] edr file hash check passed.
[23:10:47] Allocated 36677 bytes for logfile
[23:10:47] Read logfile
[23:10:47] GuardedRun: success in DynamicWrapper
[23:10:47] GuardedRun: done
[23:10:47] Run: GuardedRun completed.
[23:10:49] + Opened results file
[23:10:49] - Writing 845421 bytes of core data to disk...
[23:10:50] Done: 844909 -> 816559 (compressed to 96.6 percent)
[23:10:50] ... Done.
[23:10:50] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[23:10:50] Shutting down core
[23:10:50]
[23:10:50] Folding@home Core Shutdown: FINISHED_UNIT
[23:10:53] CoreStatus = 64 (100)
[23:10:53] Unit 1 finished with 98 percent of time to deadline remaining.
[23:10:53] Updated performance fraction: 0.980858
[23:10:53] Sending work to server
[23:10:53] Project: 7620 (Run 387, Clone 0, Gen 46)
[23:10:53] - Read packet limit of 540015616... Set to 524286976.
[23:10:53] + Attempting to send results [October 27 23:10:53 UTC]
[23:10:53] - Reading file work/wuresults_01.dat from core
[23:10:53] (Read 817071 bytes from disk)
[23:10:53] Gpu type=3 species=30.
[23:10:53] Connecting to http://171.64.65.105:8080/
[23:11:07] Posted data.
[23:11:07] Initial: 0000; - Uploaded at ~57 kB/s
[23:11:07] - Averaged speed for that direction ~57 kB/s
[23:11:07] - Server has already received unit.
[23:11:07] Trying to send all finished work units
[23:11:07] + No unsent completed units remaining.
[23:11:07] + -oneunit flag given and have now finished a unit. Exiting.***** Got a SIGTERM signal (2)
[23:11:07] Killing all core threads
Folding@Home Client Shutdown.
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 1:38 am
by Macaholic
Project leader has been notified. Thank you.
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 3:08 am
by tjlane
Hi Xavier,
Two questions:
(1) How many WUs have not been credited? If you can list them that would be helpful.
(2) Are you running with -advmethods?
Thanks. Sorry about this... I'll try to track down the bug as fast as possible. I have a suspect (!) but need more data to verify.
TJ
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 3:58 am
by Xavier Zepherious
2 WU from myself -
last one credited was last night at 1:am MST
two WU's after.... no points
7620 or 7621 projects -5187 point WU's
the one I posted a completed log for... is a 7620
the only one I have a record for is above - since I did not save completed units til after the first completed WU I didn't get credit for
Im running advmethods
the other person above has the same issue
if you need his info I'll get him to post it to me or post it himself
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 4:49 am
by willyray
My third attempt to post ... here's the complete log (less my ID #) from a 7620 that was uploaded, but, never showed up at Stanford or EOC stats:
Code: Select all
--- Opening Log file [October 27 00:35:33 UTC]
# Windows GPU Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30r1
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files (x86)\FAH_GPU_Tracker_V2\FAH GPU Tracker V2\GPU0
Executable: C:\Program Files (x86)\FAH_GPU_Tracker_V2\FAH GPU Tracker V2\FAH_GPU3.exe
Arguments: -oneunit -forcegpu nvidia_fermi -advmethods -verbosity 9 -gpu 0
[00:35:33] - Ask before connecting: No
[00:35:33] - User name: willyray (Team 111065)
[00:35:33] - User ID: XXXXXXXXXXXXXXXX
[00:35:33] - Machine ID: 3
[00:35:33]
[00:35:33] Gpu type=3 species=30.
[00:35:33] Work directory not found. Creating...
[00:35:33] Could not open work queue, generating new queue...
[00:35:33] - Preparing to get new work unit...
[00:35:33] Cleaning up work directory
[00:35:33] - Autosending finished units... [October 27 00:35:33 UTC]
[00:35:33] Trying to send all finished work units
[00:35:33] + No unsent completed units remaining.
[00:35:33] - Autosend completed
[00:35:33] + Attempting to get work packet
[00:35:33] Passkey found
[00:35:33] - Will indicate memory of 4094 MB
[00:35:33] Gpu type=3 species=30.
[00:35:33] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[00:35:33] - Connecting to assignment server
[00:35:33] Connecting to http://assign-GPU.stanford.edu:8080/
[00:35:33] Posted data.
[00:35:33] Initial: 40AB; - Successful: assigned to (171.64.65.105).
[00:35:33] + News From Folding@Home: Welcome to Folding@Home
[00:35:33] Loaded queue successfully.
[00:35:33] Gpu type=3 species=30.
[00:35:33] Sent data
[00:35:33] Connecting to http://171.64.65.105:8080/
[00:35:34] Posted data.
[00:35:34] Initial: 0000; - Receiving payload (expected size: 125352)
[00:35:35] - Downloaded at ~122 kB/s
[00:35:35] - Averaged speed for that direction ~122 kB/s
[00:35:35] + Received work.
[00:35:35] + Closed connections
[00:35:35]
[00:35:35] + Processing work unit
[00:35:35] Core required: FahCore_15.exe
[00:35:35] Core found.
[00:35:35] Working on queue slot 01 [October 27 00:35:35 UTC]
[00:35:35] + Working ...
[00:35:35] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -nocpulock -checkpoint 3 -verbose -lifeline 2424 -version 630'
[00:35:35]
[00:35:35] *------------------------------*
[00:35:35] Folding@Home GPU Core
[00:35:35] Version 2.20 (Tue Aug 2 12:06:37 PDT 2011)
[00:35:35] Build host SimbiosNvdWin7
[00:35:35] Board Type NVIDIA/CUDA
[00:35:35] Core 15
[00:35:35]
[00:35:35] Window's signal control handler registered.
[00:35:35] Preparing to commence simulation
[00:35:35] - Looking at optimizations...
[00:35:35] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[00:35:35] - Created dyn
[00:35:35] - Files status OK
[00:35:35] sizeof(CORE_PACKET_HDR) = 512 file=<>
[00:35:35] - Expanded 124840 -> 501826 (decompressed 401.9 percent)
[00:35:35] Called DecompressByteArray: compressed_data_size=124840 data_size=501826, decompressed_data_size=501826 diff=0
[00:35:35] - Digital signature verified
[00:35:35]
[00:35:35] Project: 7620 (Run 797, Clone 0, Gen 70)
[00:35:35]
[00:35:35] Assembly optimizations on if available.
[00:35:35] Entering M.D.
[00:35:37] Tpr hash work/wudata_01.tpr: 868991297 3210814348 2181615393 3323288864 3358889042
[00:35:37] calling fah_main gpuDeviceId=0
[00:35:37] Working on Protein
[00:35:37] Client config found, loading data.
[00:35:37] Starting GUI Server
[00:35:38] ***** Got a SIGTERM signal (2)
[00:35:38] Killing all core threads
Folding@Home Client Shutdown.
--- Opening Log file [October 27 00:35:38 UTC]
# Windows GPU Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30r1
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files (x86)\FAH_GPU_Tracker_V2\FAH GPU Tracker V2\GPU0
Executable: C:\Program Files (x86)\FAH_GPU_Tracker_V2\FAH GPU Tracker V2\FAH_GPU3.exe
Arguments: -oneunit -forcegpu nvidia_fermi -advmethods -verbosity 9 -gpu 0
[00:35:38] - Ask before connecting: No
[00:35:38] - User name: willyray (Team 111065)
[00:35:38] - User ID: 1733CA8113AE2479
[00:35:38] - Machine ID: 3
[00:35:38]
[00:35:38] Gpu type=3 species=30.
[00:35:38] Loaded queue successfully.
[00:35:38]
[00:35:38] - Autosending finished units... [October 27 00:35:38 UTC]
[00:35:38] + Processing work unit
[00:35:38] Trying to send all finished work units
[00:35:38] Core required: FahCore_15.exe
[00:35:38] + No unsent completed units remaining.
[00:35:38] - Autosend completed
[00:35:38] Core found.
[00:35:38] Working on queue slot 01 [October 27 00:35:38 UTC]
[00:35:38] + Working ...
[00:35:38] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -nocpulock -checkpoint 3 -verbose -lifeline 1040 -version 630'
[00:35:38]
[00:35:38] *------------------------------*
[00:35:38] Folding@Home GPU Core
[00:35:38] Version 2.20 (Tue Aug 2 12:06:37 PDT 2011)
[00:35:38] Build host SimbiosNvdWin7
[00:35:38] Board Type NVIDIA/CUDA
[00:35:38] Core 15
[00:35:38]
[00:35:38] Window's signal control handler registered.
[00:35:38] Preparing to commence simulation
[00:35:38] - Looking at optimizations...
[00:35:38] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[00:35:38] - Created dyn
[00:35:38] - Files status OK
[00:35:38] sizeof(CORE_PACKET_HDR) = 512 file=<>
[00:35:38] - Expanded 124840 -> 501826 (decompressed 401.9 percent)
[00:35:38] Called DecompressByteArray: compressed_data_size=124840 data_size=501826, decompressed_data_size=501826 diff=0
[00:35:38] - Digital signature verified
[00:35:38]
[00:35:38] Project: 7620 (Run 797, Clone 0, Gen 70)
[00:35:38]
[00:35:38] Assembly optimizations on if available.
[00:35:38] Entering M.D.
[00:35:38] Tpr hash work/wudata_01.tpr: 868991297 3210814348 2181615393 3323288864 3358889042
[00:35:38] calling fah_main gpuDeviceId=0
[00:35:38] Working on Protein
[00:35:38] Client config found, loading data.
[00:35:38] Starting GUI Server
[00:35:45] Client no longer detected. Shutting down core
[00:35:45]
[00:35:45] Folding@home Core Shutdown: CLIENT_DIED
[00:52:27] Completed 800000 out of 40000000 steps (2%).
[01:00:16] Completed 1200000 out of 40000000 steps (3%).
[01:08:04] Completed 1600000 out of 40000000 steps (4%).
[01:15:53] Completed 2000000 out of 40000000 steps (5%).
[01:23:41] Completed 2400000 out of 40000000 steps (6%).
[01:31:30] Completed 2800000 out of 40000000 steps (7%).
[01:39:19] Completed 3200000 out of 40000000 steps (8%).
[01:47:07] Completed 3600000 out of 40000000 steps (9%).
[01:54:56] Completed 4000000 out of 40000000 steps (10%).
[02:02:44] Completed 4400000 out of 40000000 steps (11%).
[02:10:33] Completed 4800000 out of 40000000 steps (12%).
[02:18:21] Completed 5200000 out of 40000000 steps (13%).
[02:26:10] Completed 5600000 out of 40000000 steps (14%).
[02:33:59] Completed 6000000 out of 40000000 steps (15%).
[02:41:47] Completed 6400000 out of 40000000 steps (16%).
[02:49:36] Completed 6800000 out of 40000000 steps (17%).
[02:57:24] Completed 7200000 out of 40000000 steps (18%).
[03:05:13] Completed 7600000 out of 40000000 steps (19%).
[03:13:02] Completed 8000000 out of 40000000 steps (20%).
[03:20:50] Completed 8400000 out of 40000000 steps (21%).
[03:28:40] Completed 8800000 out of 40000000 steps (22%).
[03:36:29] Completed 9200000 out of 40000000 steps (23%).
[03:44:18] Completed 9600000 out of 40000000 steps (24%).
[03:52:08] Completed 10000000 out of 40000000 steps (25%).
[04:00:00] Completed 10400000 out of 40000000 steps (26%).
[04:07:52] Completed 10800000 out of 40000000 steps (27%).
[04:15:42] Completed 11200000 out of 40000000 steps (28%).
[04:23:33] Completed 11600000 out of 40000000 steps (29%).
[04:31:22] Completed 12000000 out of 40000000 steps (30%).
[04:39:11] Completed 12400000 out of 40000000 steps (31%).
[04:47:02] Completed 12800000 out of 40000000 steps (32%).
[04:54:51] Completed 13200000 out of 40000000 steps (33%).
[05:02:41] Completed 13600000 out of 40000000 steps (34%).
[05:10:29] Completed 14000000 out of 40000000 steps (35%).
[05:18:17] Completed 14400000 out of 40000000 steps (36%).
[05:26:06] Completed 14800000 out of 40000000 steps (37%).
[05:33:54] Completed 15200000 out of 40000000 steps (38%).
[05:41:43] Completed 15600000 out of 40000000 steps (39%).
[05:49:31] Completed 16000000 out of 40000000 steps (40%).
[05:57:20] Completed 16400000 out of 40000000 steps (41%).
[06:05:09] Completed 16800000 out of 40000000 steps (42%).
[06:12:57] Completed 17200000 out of 40000000 steps (43%).
[06:20:46] Completed 17600000 out of 40000000 steps (44%).
[06:28:35] Completed 18000000 out of 40000000 steps (45%).
[06:35:38] - Autosending finished units... [October 27 06:35:38 UTC]
[06:35:38] Trying to send all finished work units
[06:35:38] + No unsent completed units remaining.
[06:35:38] - Autosend completed
[06:36:23] Completed 18400000 out of 40000000 steps (46%).
[06:44:11] Completed 18800000 out of 40000000 steps (47%).
[06:52:00] Completed 19200000 out of 40000000 steps (48%).
[06:59:48] Completed 19600000 out of 40000000 steps (49%).
[07:07:37] Completed 20000000 out of 40000000 steps (50%).
[07:15:25] Completed 20400000 out of 40000000 steps (51%).
[07:23:14] Completed 20800000 out of 40000000 steps (52%).
[07:31:02] Completed 21200000 out of 40000000 steps (53%).
[07:38:51] Completed 21600000 out of 40000000 steps (54%).
[07:46:40] Completed 22000000 out of 40000000 steps (55%).
[07:54:28] Completed 22400000 out of 40000000 steps (56%).
[08:02:16] Completed 22800000 out of 40000000 steps (57%).
[08:10:05] Completed 23200000 out of 40000000 steps (58%).
[08:17:53] Completed 23600000 out of 40000000 steps (59%).
[08:25:42] Completed 24000000 out of 40000000 steps (60%).
[08:33:30] Completed 24400000 out of 40000000 steps (61%).
[08:41:19] Completed 24800000 out of 40000000 steps (62%).
[08:49:07] Completed 25200000 out of 40000000 steps (63%).
[08:56:56] Completed 25600000 out of 40000000 steps (64%).
[09:04:44] Completed 26000000 out of 40000000 steps (65%).
[09:12:33] Completed 26400000 out of 40000000 steps (66%).
[09:20:21] Completed 26800000 out of 40000000 steps (67%).
[09:28:10] Completed 27200000 out of 40000000 steps (68%).
[09:35:59] Completed 27600000 out of 40000000 steps (69%).
[09:43:47] Completed 28000000 out of 40000000 steps (70%).
[09:51:36] Completed 28400000 out of 40000000 steps (71%).
[09:59:25] Completed 28800000 out of 40000000 steps (72%).
[10:07:13] Completed 29200000 out of 40000000 steps (73%).
[10:15:02] Completed 29600000 out of 40000000 steps (74%).
[10:22:51] Completed 30000000 out of 40000000 steps (75%).
[10:30:39] Completed 30400000 out of 40000000 steps (76%).
[10:38:28] Completed 30800000 out of 40000000 steps (77%).
[10:46:16] Completed 31200000 out of 40000000 steps (78%).
[10:54:05] Completed 31600000 out of 40000000 steps (79%).
[11:01:53] Completed 32000000 out of 40000000 steps (80%).
[11:09:42] Completed 32400000 out of 40000000 steps (81%).
[11:17:31] Completed 32800000 out of 40000000 steps (82%).
[11:25:19] Completed 33200000 out of 40000000 steps (83%).
[11:33:07] Completed 33600000 out of 40000000 steps (84%).
[11:40:56] Completed 34000000 out of 40000000 steps (85%).
[11:48:45] Completed 34400000 out of 40000000 steps (86%).
[11:56:33] Completed 34800000 out of 40000000 steps (87%).
[12:04:22] Completed 35200000 out of 40000000 steps (88%).
[12:12:10] Completed 35600000 out of 40000000 steps (89%).
[12:19:59] Completed 36000000 out of 40000000 steps (90%).
[12:27:47] Completed 36400000 out of 40000000 steps (91%).
[12:35:36] Completed 36800000 out of 40000000 steps (92%).
[12:35:38] - Autosending finished units... [October 27 12:35:38 UTC]
[12:35:38] Trying to send all finished work units
[12:35:38] + No unsent completed units remaining.
[12:35:38] - Autosend completed
[12:43:24] Completed 37200000 out of 40000000 steps (93%).
[12:51:13] Completed 37600000 out of 40000000 steps (94%).
[12:59:01] Completed 38000000 out of 40000000 steps (95%).
[13:06:50] Completed 38400000 out of 40000000 steps (96%).
[13:14:39] Completed 38800000 out of 40000000 steps (97%).
[13:22:27] Completed 39200000 out of 40000000 steps (98%).
[13:30:16] Completed 39600000 out of 40000000 steps (99%).
[13:38:04] Completed 40000000 out of 40000000 steps (100%).
[13:38:05] Finished fah_main status=0
[13:38:05] Successful run
[13:38:05] DynamicWrapper: Finished Work Unit: sleep=10000
[13:38:15] Reserved 762164 bytes for xtc file; Cosm status=0
[13:38:15] Allocated 762164 bytes for xtc file
[13:38:15] - Reading up to 762164 from "work/wudata_01.xtc": Read 762164
[13:38:15] Read 762164 bytes from xtc file; available packet space=785668300
[13:38:15] xtc file hash check passed.
[13:38:15] Reserved 47688 47688 785668300 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[13:38:15] Allocated 47688 bytes for arc file
[13:38:15] - Reading up to 47688 from "work/wudata_01.trr": Read 47688
[13:38:15] Read 47688 bytes from arc file; available packet space=785620612
[13:38:15] trr file hash check passed.
[13:38:15] Allocated 544 bytes for edr file
[13:38:15] Read bedfile
[13:38:15] edr file hash check passed.
[13:38:15] Allocated 36678 bytes for logfile
[13:38:15] Read logfile
[13:38:15] GuardedRun: success in DynamicWrapper
[13:38:15] GuardedRun: done
[13:38:15] Run: GuardedRun completed.
[13:38:17] + Opened results file
[13:38:17] - Writing 847586 bytes of core data to disk...
[13:38:17] Done: 847074 -> 819028 (compressed to 96.6 percent)
[13:38:17] ... Done.
[13:38:17] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[13:38:17] Shutting down core
[13:38:17]
[13:38:17] Folding@home Core Shutdown: FINISHED_UNIT
[13:38:19] CoreStatus = 64 (100)
[13:38:19] Unit 1 finished with 97 percent of time to deadline remaining.
[13:38:19] Updated performance fraction: 0.969633
[13:38:19] Sending work to server
[13:38:19] Project: 7620 (Run 797, Clone 0, Gen 70)
[13:38:19] - Read packet limit of 540015616... Set to 524286976.
[13:38:19] + Attempting to send results [October 27 13:38:19 UTC]
[13:38:19] - Reading file work/wuresults_01.dat from core
[13:38:19] (Read 819540 bytes from disk)
[13:38:19] Gpu type=3 species=30.
[13:38:19] Connecting to http://171.64.65.105:8080/
[13:38:25] Posted data.
[13:38:25] Initial: 0000; - Uploaded at ~133 kB/s
[13:38:25] - Averaged speed for that direction ~133 kB/s
[13:38:25] + Results successfully sent
[13:38:25] Thank you for your contribution to Folding@Home.
[13:38:25] + Number of Units Completed: 45
[13:38:29] Trying to send all finished work units
[13:38:29] + No unsent completed units remaining.
[13:38:29] + -oneunit flag given and have now finished a unit. Exiting.***** Got a SIGTERM signal (2)
[13:38:29] Killing all core threads
Folding@Home Client Shutdown.
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 5:09 am
by kawika57
I also seem to have lost Project: 7620 (Run 711, Clone 0, Gen 106). Upload with no errors 9:25 am CST.
Code: Select all
[19:46:15] Gpu type=3 species=30.
[19:46:15] Work directory not found. Creating...
[19:46:15] Could not open work queue, generating new queue...
[19:46:15] - Preparing to get new work unit...
[19:46:15] Cleaning up work directory
[19:46:15] - Autosending finished units... [October 26 19:46:15 UTC]
[19:46:15] Trying to send all finished work units
[19:46:15] + No unsent completed units remaining.
[19:46:15] + Attempting to get work packet
[19:46:15] - Autosend completed
[19:46:15] Passkey found
[19:46:15] - Will indicate memory of 6134 MB
[19:46:15] Gpu type=3 species=30.
[19:46:15] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 5
[19:46:15] - Connecting to assignment server
[19:46:15] Connecting to http://assign-GPU.stanford.edu:8080/
[19:46:16] Posted data.
[19:46:16] Initial: 40AB; - Successful: assigned to (171.64.65.105).
[19:46:16] + News From Folding@Home: Welcome to Folding@Home
[19:46:16] Loaded queue successfully.
[19:46:16] Gpu type=3 species=30.
[19:46:16] Sent data
[19:46:16] Connecting to http://171.64.65.105:8080/
[19:46:16] Posted data.
[19:46:16] Initial: 0000; - Receiving payload (expected size: 125309)
[19:46:17] - Downloaded at ~122 kB/s
[19:46:17] - Averaged speed for that direction ~122 kB/s
[19:46:17] + Received work.
[19:46:17] + Closed connections
[19:46:17]
[19:46:17] + Processing work unit
[19:46:17] Core required: FahCore_15.exe
[19:46:17] Core found.
[19:46:17] Working on queue slot 01 [October 26 19:46:17 UTC]
[19:46:17] + Working ...
[19:46:17] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -nocpulock -checkpoint 3 -verbose -lifeline 3116 -version 630'
[19:46:17]
[19:46:17] *------------------------------*
[19:46:17] Folding@Home GPU Core
[19:46:17] Version 2.20 (Tue Aug 2 12:06:37 PDT 2011)
[19:46:17] Build host SimbiosNvdWin7
[19:46:17] Board Type NVIDIA/CUDA
[19:46:17] Core 15
[19:46:17]
[19:46:17] Window's signal control handler registered.
[19:46:17] Preparing to commence simulation
[19:46:17] - Looking at optimizations...
[19:46:17] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[19:46:17] - Created dyn
[19:46:17] - Files status OK
[19:46:17] sizeof(CORE_PACKET_HDR) = 512 file=<>
[19:46:17] - Expanded 124797 -> 501826 (decompressed 402.1 percent)
[19:46:17] Called DecompressByteArray: compressed_data_size=124797 data_size=501826, decompressed_data_size=501826 diff=0
[19:46:17] - Digital signature verified
[19:46:17]
[19:46:17] Project: 7620 (Run 711, Clone 0, Gen 106)
[19:46:17]
[19:46:17] Assembly optimizations on if available.
[19:46:17] Entering M.D.
[19:46:19] Tpr hash work/wudata_01.tpr: 1961592501 1902935580 1627091491 471109522 642014790
[19:46:19] calling fah_main gpuDeviceId=0
[19:46:20] Working on Protein
[19:46:20] Client config found, loading data.
[19:46:20] Starting GUI Server
[19:47:21] Setting checkpoint frequency: 400000
[19:47:21] Completed 3 out of 40000000 steps (0%).
[19:53:02] Completed 400000 out of 40000000 steps (1%).
[19:58:43] Completed 800000 out of 40000000 steps (2%).
[20:04:24] Completed 1200000 out of 40000000 steps (3%).
[20:10:05] Completed 1600000 out of 40000000 steps (4%).
[20:15:46] Completed 2000000 out of 40000000 steps (5%).
[20:21:28] Completed 2400000 out of 40000000 steps (6%).
[20:27:10] Completed 2800000 out of 40000000 steps (7%).
[20:32:52] Completed 3200000 out of 40000000 steps (8%).
[20:38:33] Completed 3600000 out of 40000000 steps (9%).
[20:44:15] Completed 4000000 out of 40000000 steps (10%).
[20:49:56] Completed 4400000 out of 40000000 steps (11%).
[20:55:38] Completed 4800000 out of 40000000 steps (12%).
[21:01:19] Completed 5200000 out of 40000000 steps (13%).
[21:07:00] Completed 5600000 out of 40000000 steps (14%).
[21:12:41] Completed 6000000 out of 40000000 steps (15%).
[21:18:22] Completed 6400000 out of 40000000 steps (16%).
[21:24:04] Completed 6800000 out of 40000000 steps (17%).
[21:29:47] Completed 7200000 out of 40000000 steps (18%).
[21:35:29] Completed 7600000 out of 40000000 steps (19%).
[21:41:11] Completed 8000000 out of 40000000 steps (20%).
[21:46:54] Completed 8400000 out of 40000000 steps (21%).
[21:50:34] ***** Got a SIGTERM signal (2)
[21:50:34] Killing all core threads
Folding@Home Client Shutdown.
--- Opening Log file [October 27 07:10:31 UTC]
# Windows GPU Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30r1
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files (x86)\Tracker V2\FAH GPU Tracker V2\GPU0
Executable: C:\Program Files (x86)\Tracker V2\FAH GPU Tracker V2\FAH_GPU3.exe
Arguments: -oneunit -forcegpu nvidia_fermi -advmethods -verbosity 9 -gpu 0
[07:10:31] - Ask before connecting: No
[07:10:31] - User name: kawika57 (Team 111065)
[07:10:31] - User ID: xxxxxxxxxxxxx
[07:10:31] - Machine ID: 3
[07:10:31]
[07:10:31] Gpu type=3 species=30.
[07:10:31] Loaded queue successfully.
[07:10:31]
[07:10:31] + Processing work unit
[07:10:31] - Autosending finished units... [October 27 07:10:31 UTC]
[07:10:31] Core required: FahCore_15.exe
[07:10:31] Trying to send all finished work units
[07:10:31] + No unsent completed units remaining.
[07:10:31] - Autosend completed
[07:10:31] Core found.
[07:10:31] Working on queue slot 01 [October 27 07:10:31 UTC]
[07:10:31] + Working ...
[07:10:31] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -nocpulock -checkpoint 3 -verbose -lifeline 4700 -version 630'
[07:10:31]
[07:10:31] *------------------------------*
[07:10:31] Folding@Home GPU Core
[07:10:31] Version 2.20 (Tue Aug 2 12:06:37 PDT 2011)
[07:10:31] Build host SimbiosNvdWin7
[07:10:31] Board Type NVIDIA/CUDA
[07:10:31] Core 15
[07:10:31]
[07:10:31] Window's signal control handler registered.
[07:10:31] Preparing to commence simulation
[07:10:31] - Looking at optimizations...
[07:10:31] - Files status OK
[07:10:31] sizeof(CORE_PACKET_HDR) = 512 file=<>
[07:10:31] - Expanded 124797 -> 501826 (decompressed 402.1 percent)
[07:10:31] Called DecompressByteArray: compressed_data_size=124797 data_size=501826, decompressed_data_size=501826 diff=0
[07:10:31] - Digital signature verified
[07:10:31]
[07:10:31] Project: 7620 (Run 711, Clone 0, Gen 106)
[07:10:31]
[07:10:31] Assembly optimizations on if available.
[07:10:31] Entering M.D.
[07:10:33] Will resume from checkpoint file work/wudata_01.ckp
[07:10:33] Tpr hash work/wudata_01.tpr: 1961592501 1902935580 1627091491 471109522 642014790
[07:10:33] calling fah_main gpuDeviceId=0
[07:10:34] Working on Protein
[07:10:34] Client config found, loading data.
[07:10:34] Starting GUI Server
[07:11:36] Resuming from checkpoint
[07:11:36] fcCheckPointResume: retreived and current tpr file hash:
[07:11:36] 0 1961592501 1961592501
[07:11:36] 1 1902935580 1902935580
[07:11:36] 2 1627091491 1627091491
[07:11:36] 3 471109522 471109522
[07:11:36] 4 642014790 642014790
[07:11:36] fcCheckPointResume: file hashes same.
[07:11:36] fcCheckPointResume: state restored.
[07:11:36] fcCheckPointResume: name work/wudata_01.log Verified work/wudata_01.log
[07:11:36] fcCheckPointResume: name work/wudata_01.trr Verified work/wudata_01.trr
[07:11:36] fcCheckPointResume: name work/wudata_01.xtc Verified work/wudata_01.xtc
[07:11:36] fcCheckPointResume: name work/wudata_01.edr Verified work/wudata_01.edr
[07:11:36] fcCheckPointResume: state restored 2
[07:11:36] Resumed from checkpoint
[07:11:36] Setting checkpoint frequency: 400000
[07:11:36] Completed 8400001 out of 40000000 steps (21%).
[07:16:21] Completed 8800000 out of 40000000 steps (22%).
[07:21:07] Completed 9200000 out of 40000000 steps (23%).
[07:25:53] Completed 9600000 out of 40000000 steps (24%).
[07:30:38] Completed 10000000 out of 40000000 steps (25%).
[07:35:24] Completed 10400000 out of 40000000 steps (26%).
[07:40:10] Completed 10800000 out of 40000000 steps (27%).
[07:44:55] Completed 11200000 out of 40000000 steps (28%).
[07:49:41] Completed 11600000 out of 40000000 steps (29%).
[07:54:26] Completed 12000000 out of 40000000 steps (30%).
[07:59:12] Completed 12400000 out of 40000000 steps (31%).
[08:03:58] Completed 12800000 out of 40000000 steps (32%).
[08:08:44] Completed 13200000 out of 40000000 steps (33%).
[08:13:29] Completed 13600000 out of 40000000 steps (34%).
[08:18:15] Completed 14000000 out of 40000000 steps (35%).
[08:23:00] Completed 14400000 out of 40000000 steps (36%).
[08:27:46] Completed 14800000 out of 40000000 steps (37%).
[08:32:32] Completed 15200000 out of 40000000 steps (38%).
[08:37:38] Completed 15600000 out of 40000000 steps (39%).
[08:43:20] Completed 16000000 out of 40000000 steps (40%).
[08:49:02] Completed 16400000 out of 40000000 steps (41%).
[08:54:44] Completed 16800000 out of 40000000 steps (42%).
[09:00:26] Completed 17200000 out of 40000000 steps (43%).
[09:06:08] Completed 17600000 out of 40000000 steps (44%).
[09:11:50] Completed 18000000 out of 40000000 steps (45%).
[09:17:32] Completed 18400000 out of 40000000 steps (46%).
[09:23:13] Completed 18800000 out of 40000000 steps (47%).
[09:28:55] Completed 19200000 out of 40000000 steps (48%).
[09:34:36] Completed 19600000 out of 40000000 steps (49%).
[09:40:17] Completed 20000000 out of 40000000 steps (50%).
[09:45:58] Completed 20400000 out of 40000000 steps (51%).
[09:51:39] Completed 20800000 out of 40000000 steps (52%).
[09:57:20] Completed 21200000 out of 40000000 steps (53%).
[10:03:01] Completed 21600000 out of 40000000 steps (54%).
[10:08:42] Completed 22000000 out of 40000000 steps (55%).
[10:14:24] Completed 22400000 out of 40000000 steps (56%).
[10:20:05] Completed 22800000 out of 40000000 steps (57%).
[10:25:46] Completed 23200000 out of 40000000 steps (58%).
[10:31:27] Completed 23600000 out of 40000000 steps (59%).
[10:37:08] Completed 24000000 out of 40000000 steps (60%).
[10:42:49] Completed 24400000 out of 40000000 steps (61%).
[10:48:30] Completed 24800000 out of 40000000 steps (62%).
[10:54:11] Completed 25200000 out of 40000000 steps (63%).
[10:59:52] Completed 25600000 out of 40000000 steps (64%).
[11:05:33] Completed 26000000 out of 40000000 steps (65%).
[11:11:15] Completed 26400000 out of 40000000 steps (66%).
[11:16:56] Completed 26800000 out of 40000000 steps (67%).
[11:22:37] Completed 27200000 out of 40000000 steps (68%).
[11:28:18] Completed 27600000 out of 40000000 steps (69%).
[11:33:59] Completed 28000000 out of 40000000 steps (70%).
[11:39:40] Completed 28400000 out of 40000000 steps (71%).
[11:45:21] Completed 28800000 out of 40000000 steps (72%).
[11:51:02] Completed 29200000 out of 40000000 steps (73%).
[11:56:43] Completed 29600000 out of 40000000 steps (74%).
[12:02:24] Completed 30000000 out of 40000000 steps (75%).
[12:08:05] Completed 30400000 out of 40000000 steps (76%).
[12:13:47] Completed 30800000 out of 40000000 steps (77%).
[12:19:28] Completed 31200000 out of 40000000 steps (78%).
[12:25:09] Completed 31600000 out of 40000000 steps (79%).
[12:30:50] Completed 32000000 out of 40000000 steps (80%).
[12:36:31] Completed 32400000 out of 40000000 steps (81%).
[12:42:12] Completed 32800000 out of 40000000 steps (82%).
[12:47:53] Completed 33200000 out of 40000000 steps (83%).
[12:53:34] Completed 33600000 out of 40000000 steps (84%).
[12:59:16] Completed 34000000 out of 40000000 steps (85%).
[13:04:57] Completed 34400000 out of 40000000 steps (86%).
[13:10:31] - Autosending finished units... [October 27 13:10:31 UTC]
[13:10:31] Trying to send all finished work units
[13:10:31] + No unsent completed units remaining.
[13:10:31] - Autosend completed
[13:10:38] Completed 34800000 out of 40000000 steps (87%).
[13:16:19] Completed 35200000 out of 40000000 steps (88%).
[13:22:00] Completed 35600000 out of 40000000 steps (89%).
[13:27:41] Completed 36000000 out of 40000000 steps (90%).
[13:33:22] Completed 36400000 out of 40000000 steps (91%).
[13:39:03] Completed 36800000 out of 40000000 steps (92%).
[13:44:44] Completed 37200000 out of 40000000 steps (93%).
[13:50:26] Completed 37600000 out of 40000000 steps (94%).
[13:56:07] Completed 38000000 out of 40000000 steps (95%).
[14:01:48] Completed 38400000 out of 40000000 steps (96%).
[14:07:29] Completed 38800000 out of 40000000 steps (97%).
[14:13:10] Completed 39200000 out of 40000000 steps (98%).
[14:18:51] Completed 39600000 out of 40000000 steps (99%).
[14:24:32] Completed 40000000 out of 40000000 steps (100%).
[14:24:33] Finished fah_main status=0
[14:24:33] Successful run
[14:24:33] DynamicWrapper: Finished Work Unit: sleep=10000
[14:24:43] Reserved 759532 bytes for xtc file; Cosm status=0
[14:24:43] Allocated 759532 bytes for xtc file
[14:24:43] - Reading up to 759532 from "work/wudata_01.xtc": Read 759532
[14:24:43] Read 759532 bytes from xtc file; available packet space=785670932
[14:24:43] xtc file hash check passed.
[14:24:43] Reserved 47688 47688 785670932 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[14:24:43] Allocated 47688 bytes for arc file
[14:24:43] - Reading up to 47688 from "work/wudata_01.trr": Read 47688
[14:24:43] Read 47688 bytes from arc file; available packet space=785623244
[14:24:43] trr file hash check passed.
[14:24:43] Allocated 544 bytes for edr file
[14:24:43] Read bedfile
[14:24:43] edr file hash check passed.
[14:24:43] Allocated 36879 bytes for logfile
[14:24:43] Read logfile
[14:24:43] GuardedRun: success in DynamicWrapper
[14:24:43] GuardedRun: done
[14:24:43] Run: GuardedRun completed.
[14:24:43] + Opened results file
[14:24:43] - Writing 845155 bytes of core data to disk...
[14:24:43] Done: 844643 -> 816409 (compressed to 96.6 percent)
[14:24:43] ... Done.
[14:24:43] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[14:24:43] Shutting down core
[14:24:43]
[14:24:43] Folding@home Core Shutdown: FINISHED_UNIT
[14:24:47] CoreStatus = 64 (100)
[14:24:47] Unit 1 finished with 96 percent of time to deadline remaining.
[14:24:47] Updated performance fraction: 0.956607
[14:24:47] Sending work to server
[14:24:47] Project: 7620 (Run 711, Clone 0, Gen 106)
[14:24:47] - Read packet limit of 540015616... Set to 524286976.
[14:24:47] + Attempting to send results [October 27 14:24:47 UTC]
[14:24:47] - Reading file work/wuresults_01.dat from core
[14:24:47] (Read 816921 bytes from disk)
[14:24:47] Gpu type=3 species=30.
[14:24:47] Connecting to http://171.64.65.105:8080/
[14:24:57] Posted data.
[14:24:57] Initial: 0000; - Uploaded at ~79 kB/s
[14:24:57] - Averaged speed for that direction ~79 kB/s
[14:24:57] + Results successfully sent
[14:24:57] Thank you for your contribution to Folding@Home.
[14:24:57] + Number of Units Completed: 14
[14:25:01] Trying to send all finished work units
[14:25:01] + No unsent completed units remaining.
[14:25:01] + -oneunit flag given and have now finished a unit. Exiting.***** Got a SIGTERM signal (2)
[14:25:01] Killing all core threads
Folding@Home Client Shutdown.
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 6:39 am
by tjlane
Hmmm, no conclusions yet. I will continue to search in the morning.
If you're reading this and are having issues with p7620 or p7621 points, please post here.
Also, if you've successfully received credit for these units since the OP, a post would be great so we know if this is limited or wide-spread
Sorry to any who are losing credit... I will do my best to remedy the situation over here at Stanford.
Re: posted wu and no credit
Posted: Fri Oct 28, 2011 6:56 am
by kawika57
I have successfully completed a 76xx unit after having the unit in question go missing. These units were processed on a different machine. Sequence went like this Rig 1 completed and credited. Rig 2 completed not credited. Rig 1 completed and credited.
Re: Post issues with Project 7620 or 7621 points here
Posted: Fri Oct 28, 2011 11:58 am
by VijayPande
Thanks for your posts. There was one stats update which doesn't have a record on the stats server, but is on the WS. We've run a manual recredit for it. All the WUs above were in that update.