Folding Forum

Posted: **Fri Sep 09, 2011 11:02 am**

It's all for the cause, I dont mind, totally my mistake!!

However I don't know if it is fixed on my end.

I inadvertantley ended up setting up my username to "y" which is a valid username on my Team. I reconfigured the console to my real username, or so I thought.
FahMon still shows my username as "y" in the work unit information window. I have checked the log and the settings on this current run do say my real username

any ideas? will "f" get these points as well?
thank you for any information you can provide me with.

btw: I am running with a client passkey if that helps at all????

folding name: Gorisan_NCIX

Posted: **Fri Sep 09, 2011 2:50 pm**

Hello, Gorisan. Welcome to Folding@Home Support Forum.

If the folding name and team number are correct in the log, they should credit that account. I can't verify a particular WU credit without more info (Project, Run, Clone, Gen), but I can tell you these three WUs credited your account most recently.

Project: 6055 (Run 0, Clone 196, Gen 323)
Hi Gorisan_NCIX (team 37412),
Your WU (P6055 R0 C196 G323) was added to the stats database on 2011-09-08 04:08:54 for 481 points of credit.

Project: 6884 (Run 561, Clone 9, Gen 59)
Hi Gorisan_NCIX (team 37412),
Your WU (P6884 R561 C9 G59) was added to the stats database on 2011-09-08 10:03:25 for 69 points of credit.

Project: 6073 (Run 0, Clone 103, Gen 430)
Hi Gorisan_NCIX (team 37412),
Your WU (P6073 R0 C103 G430) was added to the stats database on 2011-09-08 11:07:52 for 481 points of credit.

Please post the Project: xxxx (Run x, Clone x, Gen x) line from your log of any WU still in question for you after the log indicates it has been returned to Stanford and we'll check for you.

Try restarting FAHMon to see if the monitor will pick up on the changed configuration for your client.

Posted: **Fri Sep 09, 2011 8:19 pm**

Project: 7200 (Run 1, Clone 5, Gen 17)

This is the project I think may have gone into "y" account, as I mentioned before it is all for a good cause

Gorisan_NCIX

Posted: **Fri Sep 09, 2011 9:05 pm**

Interesting, that one doesn't seem to have been credited to anyone.

Project 7200, Run 1, Clone 5, Gen 17

No data back from query

Posted: **Fri Sep 09, 2011 10:38 pm**

Hmmm, Shows how green I am although it did say it was ok, if it has to be redone then my apologies...... I will paste the output on the log.
Not a big deal. I have had other problems on my mac and ended up removing folding@home but this particular job was on my
PC

Again no worries

Gorisan

Code: Select all

*------------------------------*

Folding@Home Gromacs GB Core

Version 2.27 (Dec. 15, 2010)


Preparing to commence simulation

- Ensuring status. Please wait.
- Looking at optimizations...

- Working with standard loops on this execution
.
- Previous termination of core was improper.

- Files status OK

- Expanded 664156
-> 1297016 (decompressed 195.2 percent)
Called DecompressByteArray: compressed_data_size=
664156 data_size=1297016, decompressed_data_size=1297016 diff=0

- Digital signature verified


Project: 7200 (Run 1, Clone 5, Gen 17)



Entering M.D.

Using Gromacs checkpoints

Mapping NT from 4 to 4
 
Resuming from checkpoint

Verified work/wudata_03.log

Verified work/wudata_03.trr

Verified work/wudata_03.xtc

Verified work/wudata_03.edr

Completed 517469 out of 750000 steps
  (68%)
Completed 517500 out of 750000 steps
  (69%)
Completed 525000 out of 750000 steps
  (70%)
Completed 532500 out of 750000 steps
  (71%)
Completed 540000 out of 750000 steps 
  (72%)
Completed 547500 out of 750000 steps
  (73%)
Completed 555000 out of 750000 steps
  (74%)
Completed 562500 out of 750000 steps
  (75%)
Completed 570000 out of 750000 steps
  (76%)
Completed 577500 out of 750000 steps
  (77%)
Completed 585000 out of 750000 steps
  (78%)
Completed 592500 out of 750000 steps
  (79%)
Completed 600000 out of 750000 steps
  (80%)
Completed 607500 out of 750000 steps
  (81%)
Completed 615000 out of 750000 steps
  (82%)
Completed 622500 out of 750000 steps
  (83%)
Completed 630000 out of 750000 steps
  (84%)
Completed 637500 out of 750000 steps
  (85%)
Completed 645000 out of 750000 steps
  (86%)
Completed 652500 out of 750000 steps
  (87%)
Completed 660000 out of 750000 steps
  (88%)
Completed 667500 out of 750000 steps
  (89%)
Completed 675000 out of 750000 steps
  (90%)
Completed 682500 out of 750000 steps
  (91%)
Completed 690000 out of 750000 steps
  (92%)
Completed 697500 out of 750000 steps
  (93%)
Completed 705000 out of 750000 steps
  (94%)
Completed 712500 out of 750000 steps
  (95%)
Completed 720000 out of 750000 steps
  (96%)
Completed 727500 out of 750000 steps
  (97%)
Completed 735000 out of 750000 steps
  (98%)
Completed 742500 out of 750000 steps
  (99%)
Completed 750000 out of 750000 steps
  (100%)

DynamicWrapper: Finished Work Unit: sleep=10000

Finished Work Unit
:
- Reading up to 1152288 from "work/wudata_03.trr
": Read 1152288
trr file hash check passed.

- Reading up to 1106412 from "work/wudata_03.xtc":
 Read 1106412
xtc file hash check passed.
edr
 file hash check passed.
logfile size: 133015
Leaving Run


- Writing 2500219 bytes of core data to disk...
Done: 2499707 -> 2309458 (compressed to 92.3 percent)
  ... Done
.
- Shutting down core

Folding@home Core Shutdown: FINISHED_UNIT

Posted: **Fri Sep 09, 2011 11:29 pm**

One more credited correctly:

Hi Gorisan_NCIX (team 37412),
Your WU (P6984 R0 C105 G69) was added to the stats database on 2011-09-09 11:07:53 for 552 points of credit.

Posted: **Fri Sep 09, 2011 11:32 pm**

Gorisan wrote:...
- Writing 2500219 bytes of core data to disk...
Done: 2499707 -> 2309458 (compressed to 92.3 percent)
... Done
.
- Shutting down core

Folding@home Core Shutdown: FINISHED_UNIT

What does the log say after that? I'm looking for evidence the completed WU has gone back to the server and/or any error messages from the finish point to the start of the next WU.

Folding Forum

Q: Using Console I inadvertently gave "y" my points

Q: Using Console I inadvertently gave "y" my points

Re: Q: Using Console I inadvertently gave "y" my points

Re: Q: Using Console I inadvertently gave "y" my points

Re: Q: Using Console I inadvertently gave "y" my points

Strange......

Re: Q: Using Console I inadvertently gave "y" my points

Re: Strange......