My system is as follows:
Core i7 920 - currently not overclocked, but its liquid cooled and I've had it past 4.0 before
Nvidia 260 GTX 216 core - non oced
6gig ddr3 ram
Currently I have the "Windows XP/2003/Vista/7 GPU3 (required for Fermi) System tray client with special viewer for NVIDIA GPU's (installer msi). 6.41" installed, its approximating finishing one WU in around 9 hours. It just crashed as I adjusted the load percentage from max to min, but it didn't change the projected finish time. Also, according to coretemp it's only spiking one core load to about 50% for a few seconds, and then dropping all the cores to between 5-15%
My computer isn't even remotely warming up either, as it usually does when doing anything remotely intensive. Am I using the wrong client? The F@hViewer is also stating "The core is not running now" and I haven't seen it once say it is.
Sorry for the noob questions.
Client question and running issues
Moderators: Site Moderators, FAHC Science Team
Re: Client question and running issues
Hi there Steel,
Could you please post the contents of your log file? That will help the community decipher what is going wrong with your system
Use the code brackets to get it formatted properly in the forum!
k1wi
Could you please post the contents of your log file? That will help the community decipher what is going wrong with your system
Use the code brackets to get it formatted properly in the forum!
k1wi
Re: Client question and running issues
Okay, trying to post it now, hopefully it comes out nice. Right after I posted I realized it just crashed the viewer, not the program itself, and it saved. Sorry if the log file is a mess, I've been playing with settings and closing the program a few times.
I didn't mention earlier, but I'm running Vista 64 bit.
It seems the viewer doesn't really update, as when it's closed and reopened, it restarts at 0 work done. I just took a shower and meanwhile turned the percentage load to 100%, and when I came back 20-25minutes later it had done a LOT more work in the meantime. So it may be running correctly, but I have nothing to compare it to.
I didn't mention earlier, but I'm running Vista 64 bit.
It seems the viewer doesn't really update, as when it's closed and reopened, it restarts at 0 work done. I just took a shower and meanwhile turned the percentage load to 100%, and when I came back 20-25minutes later it had done a LOT more work in the meantime. So it may be running correctly, but I have nothing to compare it to.
Code: Select all
--- Opening Log file [May 27 00:47:15 UTC]
# Windows GPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.41r2
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Steel\AppData\Roaming\Folding@home-gpu
[00:47:15] Gpu type=2 species=13.
[00:51:15] - Ask before connecting: Yes
[00:51:15] - User name: i7_Steel (Team 0)
[00:51:15] - User ID not found locally
[00:51:15] + Requesting User ID from server
[00:51:15] - Presenting message box asking to network.
[00:51:20] - Machine ID: 2
[00:51:20]
[00:51:20] Work directory not found. Creating...
[00:51:20] Could not open work queue, generating new queue...
[00:51:20] Initialization complete
[00:51:20] - Preparing to get new work unit...
[00:51:20] Cleaning up work directory
[00:51:20] + Attempting to get work packet
[00:51:20] Gpu type=2 species=13.
[00:51:20] - Connecting to assignment server
[00:51:21] - Successful: assigned to (171.64.65.61).
[00:51:21] + News From Folding@Home: Welcome to Folding@Home
[00:51:21] Loaded queue successfully.
[00:51:21] Gpu type=2 species=13.
[00:51:22] + Connections closed: You may now disconnect
[00:51:22]
[00:51:22] + Processing work unit
[00:51:22] Core required: FahCore_11.exe
[00:51:22] Core not found.
[00:51:22] - Core is not present or corrupted.
[00:51:22] - Attempting to download new core...
[00:51:22] + Downloading new core: FahCore_11.exe
[00:51:22] - Presenting message box asking to network.
[00:51:26] + 10240 bytes downloaded
[00:51:26] + 20480 bytes downloaded
[00:51:26] + 30720 bytes downloaded
[00:51:26] + 40960 bytes downloaded
[00:51:26] + 51200 bytes downloaded
[00:51:27] + 61440 bytes downloaded
[00:51:27] + 71680 bytes downloaded
[00:51:27] + 81920 bytes downloaded
[00:51:27] + 92160 bytes downloaded
[00:51:27] + 102400 bytes downloaded
[00:51:27] + 112640 bytes downloaded
[00:51:27] + 122880 bytes downloaded
[00:51:27] + 133120 bytes downloaded
[00:51:27] + 143360 bytes downloaded
[00:51:27] + 153600 bytes downloaded
[00:51:27] + 163840 bytes downloaded
[00:51:27] + 174080 bytes downloaded
[00:51:27] + 184320 bytes downloaded
[00:51:27] + 194560 bytes downloaded
[00:51:27] + 204800 bytes downloaded
[00:51:27] + 215040 bytes downloaded
[00:51:27] + 225280 bytes downloaded
[00:51:27] + 235520 bytes downloaded
[00:51:27] + 245760 bytes downloaded
[00:51:27] + 256000 bytes downloaded
[00:51:27] + 266240 bytes downloaded
[00:51:27] + 276480 bytes downloaded
[00:51:27] + 286720 bytes downloaded
[00:51:27] + 296960 bytes downloaded
[00:51:27] + 307200 bytes downloaded
[00:51:28] + 317440 bytes downloaded
[00:51:28] + 327680 bytes downloaded
[00:51:28] + 337920 bytes downloaded
[00:51:28] + 348160 bytes downloaded
[00:51:28] + 358400 bytes downloaded
[00:51:28] + 368640 bytes downloaded
[00:51:28] + 378880 bytes downloaded
[00:51:28] + 389120 bytes downloaded
[00:51:28] + 399360 bytes downloaded
[00:51:28] + 409600 bytes downloaded
[00:51:28] + 419840 bytes downloaded
[00:51:28] + 430080 bytes downloaded
[00:51:28] + 440320 bytes downloaded
[00:51:28] + 450560 bytes downloaded
[00:51:28] + 460800 bytes downloaded
[00:51:28] + 471040 bytes downloaded
[00:51:28] + 481280 bytes downloaded
[00:51:28] + 491520 bytes downloaded
[00:51:28] + 501760 bytes downloaded
[00:51:28] + 512000 bytes downloaded
[00:51:28] + 522240 bytes downloaded
[00:51:28] + 532480 bytes downloaded
[00:51:28] + 542720 bytes downloaded
[00:51:28] + 552960 bytes downloaded
[00:51:28] + 563200 bytes downloaded
[00:51:29] + 573440 bytes downloaded
[00:51:29] + 583680 bytes downloaded
[00:51:29] + 593920 bytes downloaded
[00:51:29] + 604160 bytes downloaded
[00:51:29] + 614400 bytes downloaded
[00:51:29] + 624640 bytes downloaded
[00:51:29] + 634880 bytes downloaded
[00:51:29] + 645120 bytes downloaded
[00:51:29] + 655360 bytes downloaded
[00:51:29] + 665067 bytes downloaded
[00:51:29] Verifying core Core_11.fah...
[00:51:29] Signature is VALID
[00:51:29]
[00:51:29] Trying to unzip core FahCore_11.exe
[00:51:29] Decompressed FahCore_11.exe (1908736 bytes) successfully
[00:51:34] + Core successfully engaged
[00:51:39]
[00:51:39] + Processing work unit
[00:51:39] Core required: FahCore_11.exe
[00:51:39] Core found.
[00:51:39] Working on queue slot 01 [May 27 00:51:39 UTC]
[00:51:39] + Working ...
[00:51:39]
[00:51:39] *------------------------------*
[00:51:39] Folding@Home GPU Core
[00:51:39] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[00:51:39]
[00:51:39] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[00:51:39] Build host: amoeba
[00:51:39] Board Type: Nvidia
[00:51:39] Core :
[00:51:39] Preparing to commence simulation
[00:51:39] - Looking at optimizations...
[00:51:39] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[00:51:40] - Created dyn
[00:51:40] - Files status OK
[00:51:40] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[00:51:40] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[00:51:40] - Digital signature verified
[00:51:40]
[00:51:40] Project: 10512 (Run 6, Clone 617, Gen 339)
[00:51:40]
[00:51:40] Assembly optimizations on if available.
[00:51:40] Entering M.D.
[00:51:46] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[00:51:46]
[00:51:46] Calling fah_main args: 14 usage=100
[00:51:46]
[00:51:46] Working on Protein
[00:51:47] Client config found, loading data.
[00:51:47] Starting GUI Server
[00:53:09] Completed 1%
[00:54:32] Completed 2%
[00:55:05] + Paused
[00:55:38] + Working ...
[00:55:38] Suspending work thread...
[00:55:38] Resuming work thread...
[00:55:42] CoreStatus = 62 (98)
[00:55:42] + Restarting core (settings changed)
[00:55:42]
[00:55:42] + Processing work unit
[00:55:42] Core required: FahCore_11.exe
[00:55:42] Core found.
[00:55:42] Working on queue slot 01 [May 27 00:55:42 UTC]
[00:55:42] + Working ...
[00:55:42]
[00:55:42] *------------------------------*
[00:55:42] Folding@Home GPU Core
[00:55:42] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[00:55:42]
[00:55:42] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[00:55:42] Build host: amoeba
[00:55:42] Board Type: Nvidia
[00:55:42] Core :
[00:55:42] Preparing to commence simulation
[00:55:42] - Ensuring status. Please wait.
[00:55:48] + Paused
[00:55:52] + Working ...
[00:55:52] Suspending work thread...
[00:55:52] - Looking at optimizations...
[00:55:52] - Not checking prior termination.
[00:55:52] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[00:55:52] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[00:55:52] - Digital signature verified
[00:55:52]
[00:55:52] Project: 10512 (Run 6, Clone 617, Gen 339)
[00:55:52]
[00:55:52] Suspending work thread...
[00:56:20] CoreStatus = 62 (98)
[00:56:20] + Restarting core (settings changed)
[00:56:20]
[00:56:20] + Processing work unit
[00:56:20] Core required: FahCore_11.exe
[00:56:20] Core found.
[00:56:20] Working on queue slot 01 [May 27 00:56:20 UTC]
[00:56:20] + Working ...
[00:56:20]
[00:56:20] *------------------------------*
[00:56:20] Folding@Home GPU Core
[00:56:20] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[00:56:20]
[00:56:20] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[00:56:20] Build host: amoeba
[00:56:20] Board Type: Nvidia
[00:56:20] Core :
[00:56:20] Preparing to commence simulation
[00:56:20] - Ensuring status. Please wait.
[00:56:28] CoreStatus = 62 (98)
[00:56:28] + Restarting core (settings changed)
[00:56:28]
[00:56:28] + Processing work unit
[00:56:28] Core required: FahCore_11.exe
[00:56:28] Core found.
[00:56:28] Working on queue slot 01 [May 27 00:56:28 UTC]
[00:56:28] + Working ...
[00:56:28]
[00:56:28] *------------------------------*
[00:56:28] Folding@Home GPU Core
[00:56:28] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[00:56:28]
[00:56:28] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[00:56:28] Build host: amoeba
[00:56:28] Board Type: Nvidia
[00:56:28] Core :
[00:56:28] Preparing to commence simulation
[00:56:28] - Ensuring status. Please wait.
[00:56:38] - Looking at optimizations...
[00:56:38] - Not checking prior termination.
[00:56:38] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[00:56:38] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[00:56:38] - Digital signature verified
[00:56:38]
[00:56:38] Project: 10512 (Run 6, Clone 617, Gen 339)
[00:56:38]
[00:56:38] Assembly optimizations on if available.
[00:56:38] Entering M.D.
[00:56:44] Will resume from checkpoint file
[00:56:44] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[00:56:44]
[00:56:44] Calling fah_main args: 14 usage=100
[00:56:44]
[00:56:44] Working on Protein
[00:56:45] Client config found, loading data.
[00:56:45] Starting GUI Server
[00:56:45] Resuming from checkpoint
[00:56:45] fcCheckPointResume: retreived and current tpr file hash:
[00:56:45] 0 3261014499 3261014499
[00:56:45] 1 2972423799 2972423799
[00:56:45] 2 4042627491 4042627491
[00:56:45] 3 414253130 414253130
[00:56:45] 4 3389182722 3389182722
[00:56:45] fcCheckPointResume: file hashes same.
[00:56:45] fcCheckPointResume: state restored.
[00:56:45] Verified work/wudata_01.log
[00:56:45] Verified work/wudata_01.edr
[00:56:45] Verified work/wudata_01.xtc
[00:56:45] Completed 2%
[00:57:41] CoreStatus = 62 (98)
[00:57:41] + Restarting core (settings changed)
[00:57:41]
[00:57:41] + Processing work unit
[00:57:41] Core required: FahCore_11.exe
[00:57:41] Core found.
[00:57:41] Working on queue slot 01 [May 27 00:57:41 UTC]
[00:57:41] + Working ...
[00:57:41]
[00:57:41] *------------------------------*
[00:57:41] Folding@Home GPU Core
[00:57:41] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[00:57:41]
[00:57:41] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[00:57:41] Build host: amoeba
[00:57:41] Board Type: Nvidia
[00:57:41] Core :
[00:57:41] Preparing to commence simulation
[00:57:41] - Ensuring status. Please wait.
[00:57:41] Opening http://foldingforum.org/...
[00:57:47] Gpu type=2 species=13.
[00:57:50] - Looking at optimizations...
[00:57:50] - Not checking prior termination.
[00:57:50] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[00:57:50] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[00:57:50] - Digital signature verified
[00:57:50]
[00:57:50] Project: 10512 (Run 6, Clone 617, Gen 339)
[00:57:50]
[00:57:51] Assembly optimizations on if available.
[00:57:51] Entering M.D.
[00:57:57] Will resume from checkpoint file
[00:57:57] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[00:57:57]
[00:57:57] Calling fah_main args: 14 usage=100
[00:57:57]
[00:57:57] Working on Protein
[00:57:59] Client config found, loading data.
[00:57:59] Starting GUI Server
[00:58:00] Resuming from checkpoint
[00:58:00] fcCheckPointResume: retreived and current tpr file hash:
[00:58:00] 0 3261014499 3261014499
[00:58:00] 1 2972423799 2972423799
[00:58:00] 2 4042627491 4042627491
[00:58:00] 3 414253130 414253130
[00:58:00] 4 3389182722 3389182722
[00:58:00] fcCheckPointResume: file hashes same.
[00:58:00] fcCheckPointResume: state restored.
[00:58:00] Verified work/wudata_01.log
[00:58:00] Verified work/wudata_01.edr
[00:58:00] Verified work/wudata_01.xtc
[00:58:00] Completed 2%
[00:59:32] Completed 3%
[01:01:09] Completed 4%
[01:02:46] Completed 5%
[01:04:21] Completed 6%
[01:05:59] Completed 7%
[01:07:23] CoreStatus = 62 (98)
[01:07:23] + Restarting core (settings changed)
[01:07:23]
[01:07:23] + Processing work unit
[01:07:23] Core required: FahCore_11.exe
[01:07:23] Core found.
[01:07:23] Working on queue slot 01 [May 27 01:07:23 UTC]
[01:07:23] + Working ...
[01:07:23]
[01:07:23] *------------------------------*
[01:07:23] Folding@Home GPU Core
[01:07:23] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[01:07:23]
[01:07:23] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[01:07:23] Build host: amoeba
[01:07:23] Board Type: Nvidia
[01:07:23] Core :
[01:07:23] Preparing to commence simulation
[01:07:23] - Ensuring status. Please wait.
[01:07:33] - Looking at optimizations...
[01:07:33] - Not checking prior termination.
[01:07:33] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[01:07:33] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[01:07:33] - Digital signature verified
[01:07:33]
[01:07:33] Project: 10512 (Run 6, Clone 617, Gen 339)
[01:07:33]
[01:07:33] Assembly optimizations on if available.
[01:07:33] Entering M.D.
[01:07:39] Will resume from checkpoint file
[01:07:39] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[01:07:39]
[01:07:39] Calling fah_main args: 14 usage=100
[01:07:39]
[01:07:39] Working on Protein
[01:07:40] Client config found, loading data.
[01:07:40] Starting GUI Server
[01:07:40] Resuming from checkpoint
[01:07:40] fcCheckPointResume: retreived and current tpr file hash:
[01:07:40] 0 3261014499 3261014499
[01:07:40] 1 2972423799 2972423799
[01:07:40] 2 4042627491 4042627491
[01:07:40] 3 414253130 414253130
[01:07:40] 4 3389182722 3389182722
[01:07:40] fcCheckPointResume: file hashes same.
[01:07:40] fcCheckPointResume: state restored.
[01:07:40] Verified work/wudata_01.log
[01:07:40] Verified work/wudata_01.edr
[01:07:40] Verified work/wudata_01.xtc
[01:07:40] Completed 7%
[01:09:07] Completed 8%
[01:09:40] Opening http://foldingforum.org/...
[01:10:35] Completed 9%
[01:12:07] Completed 10%
[01:13:39] Completed 11%
[01:15:09] Completed 12%
[01:16:41] Completed 13%
[01:18:11] Completed 14%
[01:19:41] Completed 15%
[01:21:09] Completed 16%
[01:22:40] Completed 17%
[01:24:08] Completed 18%
[01:25:40] Completed 19%
[01:27:10] Completed 20%
[01:28:41] Completed 21%
[01:30:12] Completed 22%
[01:31:45] Completed 23%
[01:33:14] Completed 24%
[01:35:00] Completed 25%
[01:36:44] Completed 26%
[01:38:34] Completed 27%
[01:39:06] CoreStatus = 62 (98)
[01:39:06] + Restarting core (settings changed)
[01:39:06]
[01:39:06] + Processing work unit
[01:39:06] Core required: FahCore_11.exe
[01:39:06] Core found.
[01:39:06] Working on queue slot 01 [May 27 01:39:06 UTC]
[01:39:06] + Working ...
[01:39:06]
[01:39:06] *------------------------------*
[01:39:06] Folding@Home GPU Core
[01:39:06] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[01:39:06]
[01:39:06] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[01:39:06] Build host: amoeba
[01:39:06] Board Type: Nvidia
[01:39:06] Core :
[01:39:06] Preparing to commence simulation
[01:39:06] - Ensuring status. Please wait.
[01:39:15] - Looking at optimizations...
[01:39:15] - Not checking prior termination.
[01:39:15] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[01:39:15] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[01:39:15] - Digital signature verified
[01:39:15]
[01:39:15] Project: 10512 (Run 6, Clone 617, Gen 339)
[01:39:15]
[01:39:16] Assembly optimizations on if available.
[01:39:16] Entering M.D.
[01:39:22] Will resume from checkpoint file
[01:39:22] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[01:39:22]
[01:39:22] Calling fah_main args: 14 usage=100
[01:39:22]
[01:39:25] Gpu type=2 species=13.
[01:39:27] Working on Protein
[01:39:54] Client config found, loading data.
[01:39:54] Starting GUI Server
[01:39:57] Resuming from checkpoint
[01:39:57] fcCheckPointResume: retreived and current tpr file hash:
[01:39:57] 0 3261014499 3261014499
[01:39:57] 1 2972423799 2972423799
[01:39:57] 2 4042627491 4042627491
[01:39:57] 3 414253130 414253130
[01:39:57] 4 3389182722 3389182722
[01:39:57] fcCheckPointResume: file hashes same.
[01:39:57] fcCheckPointResume: state restored.
[01:39:57] Verified work/wudata_01.log
[01:39:57] Verified work/wudata_01.edr
[01:39:57] Verified work/wudata_01.xtc
[01:39:57] Completed 27%
[01:44:32] Completed 28%
[01:44:36] Gpu type=2 species=13.
[01:44:53] Gpu type=2 species=13.
[01:45:20] Opening C:\Users\Steel\AppData\Roaming\Folding@home-gpu\MyFolding.html...
[01:49:08] Completed 29%
[01:53:52] Completed 30%
[01:58:02] Opening http://foldingforum.org/...
[01:59:24] Completed 31%
[02:02:35] Opening http://foldingforum.org/...
[02:03:15] Gpu type=2 species=13.
[02:04:58] Completed 32%
[02:09:21] Completed 33%
[02:13:01] Completed 34%
[02:17:55] Completed 35%
[02:23:34] Completed 36%
[02:24:14] Opening http://foldingforum.org/...
[02:25:43] Gpu type=2 species=13.
[02:28:59] Completed 37%
[02:34:24] Completed 38%
Folding@Home Client Shutdown.
--- Opening Log file [May 27 02:37:06 UTC]
# Windows GPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.41r2
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Steel\AppData\Roaming\Folding@home-gpu
[02:37:06] - Ask before connecting: Yes
[02:37:06] - User name: i7_Steel (Team 0)
[02:37:06] - User ID: 77509CB75AFA11D4
[02:37:06] - Machine ID: 2
[02:37:06]
[02:37:06] Gpu type=2 species=13.
[02:37:06] Loaded queue successfully.
[02:37:07] Initialization complete
[02:37:07]
[02:37:07] + Processing work unit
[02:37:07] Core required: FahCore_11.exe
[02:37:07] Core found.
[02:37:07] Working on queue slot 01 [May 27 02:37:07 UTC]
[02:37:07] + Working ...
[02:37:07]
[02:37:07] *------------------------------*
[02:37:07] Folding@Home GPU Core
[02:37:07] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[02:37:07]
[02:37:07] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[02:37:07] Build host: amoeba
[02:37:07] Board Type: Nvidia
[02:37:07] Core :
[02:37:07] Preparing to commence simulation
[02:37:07] - Looking at optimizations...
[02:37:07] - Files status OK
[02:37:07] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[02:37:07] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[02:37:07] - Digital signature verified
[02:37:07]
[02:37:07] Project: 10512 (Run 6, Clone 617, Gen 339)
[02:37:07]
[02:37:08] Assembly optimizations on if available.
[02:37:08] Entering M.D.
[02:37:14] Will resume from checkpoint file
[02:37:14] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[02:37:14]
[02:37:14] Calling fah_main args: 14 usage=100
[02:37:14]
[02:37:19] Working on Protein
[02:37:21] Gpu type=2 species=13.
[02:37:47] Client config found, loading data.
[02:37:47] Starting GUI Server
[02:37:50] Resuming from checkpoint
[02:37:50] fcCheckPointResume: retreived and current tpr file hash:
[02:37:50] 0 3261014499 3261014499
[02:37:50] 1 2972423799 2972423799
[02:37:50] 2 4042627491 4042627491
[02:37:50] 3 414253130 414253130
[02:37:50] 4 3389182722 3389182722
[02:37:50] fcCheckPointResume: file hashes same.
[02:37:50] fcCheckPointResume: state restored.
[02:37:50] Verified work/wudata_01.log
[02:37:50] Verified work/wudata_01.edr
[02:37:50] Verified work/wudata_01.xtc
[02:37:50] Completed 38%
[02:37:57] + Paused
[02:51:39] + Working ...
[02:51:39] Suspending work thread...
[02:51:39] Resuming work thread...
[02:51:44] Opening http://foldingforum.org/...
[02:55:13] Completed 39%
[02:59:03] Completed 40%
[03:00:38] Gpu type=2 species=13.
[03:02:47] Completed 41%
[03:06:40] Timer requesting checkpoint
[03:06:54] Completed 42%
[03:08:55] Gpu type=2 species=13.
[03:09:39] CoreStatus = 62 (98)
[03:09:39] + Restarting core (settings changed)
[03:09:39]
[03:09:39] + Processing work unit
[03:09:39] Core required: FahCore_11.exe
[03:09:39] Core found.
[03:09:39] Working on queue slot 01 [May 27 03:09:39 UTC]
[03:09:39] + Working ...
[03:09:39]
[03:09:39] *------------------------------*
[03:09:39] Folding@Home GPU Core
[03:09:39] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[03:09:39]
[03:09:39] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[03:09:39] Build host: amoeba
[03:09:39] Board Type: Nvidia
[03:09:39] Core :
[03:09:39] Preparing to commence simulation
[03:09:39] - Ensuring status. Please wait.
[03:09:49] - Looking at optimizations...
[03:09:49] - Not checking prior termination.
[03:09:49] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[03:09:49] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[03:09:49] - Digital signature verified
[03:09:49]
[03:09:49] Project: 10512 (Run 6, Clone 617, Gen 339)
[03:09:49]
[03:09:49] Assembly optimizations on if available.
[03:09:49] Entering M.D.
[03:09:55] Will resume from checkpoint file
[03:09:55] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[03:09:55]
[03:09:55] Calling fah_main args: 14 usage=100
[03:09:55]
[03:09:55] Working on Protein
[03:09:56] Client config found, loading data.
[03:09:56] Starting GUI Server
[03:09:56] Resuming from checkpoint
[03:09:56] fcCheckPointResume: retreived and current tpr file hash:
[03:09:56] 0 3261014499 3261014499
[03:09:56] 1 2972423799 2972423799
[03:09:56] 2 4042627491 4042627491
[03:09:56] 3 414253130 414253130
[03:09:56] 4 3389182722 3389182722
[03:09:56] fcCheckPointResume: file hashes same.
[03:09:56] fcCheckPointResume: state restored.
[03:09:56] Verified work/wudata_01.log
[03:09:56] Verified work/wudata_01.edr
[03:09:56] Verified work/wudata_01.xtc
[03:09:56] Completed 42%
[03:11:18] Completed 43%
[03:12:41] Completed 44%
[03:14:04] Completed 45%
[03:15:27] Completed 46%
[03:16:50] Completed 47%
[03:18:13] Completed 48%
[03:19:36] Completed 49%
[03:20:59] Completed 50%
[03:22:22] Completed 51%
[03:23:45] Completed 52%
[03:25:09] Completed 53%
[03:26:32] Completed 54%
[03:27:56] Completed 55%
[03:29:19] Completed 56%
[03:30:43] Completed 57%
[03:32:06] Completed 58%
[03:33:29] Completed 59%
[03:34:52] Completed 60%
[03:36:15] Completed 61%
[03:37:39] Completed 62%
[03:38:55] CoreStatus = 62 (98)
[03:38:55] + Restarting core (settings changed)
[03:38:55]
[03:38:55] + Processing work unit
[03:38:55] Core required: FahCore_11.exe
[03:38:55] Core found.
[03:38:55] Working on queue slot 01 [May 27 03:38:55 UTC]
[03:38:55] + Working ...
[03:38:55]
[03:38:55] *------------------------------*
[03:38:55] Folding@Home GPU Core
[03:38:55] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[03:38:55]
[03:38:55] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[03:38:55] Build host: amoeba
[03:38:55] Board Type: Nvidia
[03:38:55] Core :
[03:38:55] Preparing to commence simulation
[03:38:55] - Ensuring status. Please wait.
[03:39:05] - Looking at optimizations...
[03:39:05] - Not checking prior termination.
[03:39:05] - Expanded 62880 -> 336076 (decompressed 534.4 percent)
[03:39:05] Called DecompressByteArray: compressed_data_size=62880 data_size=336076, decompressed_data_size=336076 diff=0
[03:39:05] - Digital signature verified
[03:39:05]
[03:39:05] Project: 10512 (Run 6, Clone 617, Gen 339)
[03:39:05]
[03:39:06] Assembly optimizations on if available.
[03:39:06] Entering M.D.
[03:39:12] Will resume from checkpoint file
[03:39:12] Tpr hash work/wudata_01.tpr: 3261014499 2972423799 4042627491 414253130 3389182722
[03:39:12]
[03:39:12] Calling fah_main args: 14 usage=100
[03:39:12]
[03:39:18] Working on Protein
[03:39:48] Client config found, loading data.
[03:39:48] Starting GUI Server
[03:39:51] Resuming from checkpoint
[03:39:51] fcCheckPointResume: retreived and current tpr file hash:
[03:39:51] 0 3261014499 3261014499
[03:39:51] 1 2972423799 2972423799
[03:39:51] 2 4042627491 4042627491
[03:39:51] 3 414253130 414253130
[03:39:51] 4 3389182722 3389182722
[03:39:51] fcCheckPointResume: file hashes same.
[03:39:51] fcCheckPointResume: state restored.
[03:39:51] Verified work/wudata_01.log
[03:39:51] Verified work/wudata_01.edr
[03:39:52] Verified work/wudata_01.xtc
[03:39:52] Completed 62%
[03:40:04] Gpu type=2 species=13.
[03:41:28] Opening http://foldingforum.org/...Re: Client question and running issues
Leave the %CPU setting at 100%. The amount used by NVidia is pretty small without injecting any artificial pauses into the process.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
HendricksSA
- Posts: 339
- Joined: Fri Jun 26, 2009 4:34 am
Re: Client question and running issues
Steel, welcome to the Fold. It looks like your 260 is processing just fine although someone with a 260 could confirm those frame times. I'm surprised your client was able to resume after so many interruptions but you did manage to get to 62% done. Did that Project: 10512 (Run 6, Clone 617, Gen 339) finally finish?
I'm guessing since you mentioned the viewer a couple of times that you are using it. The v6 client that you are running has a buggy viewer that is a real resource hog. At its best it steals large chunks of processing time from the GPU ... at its worst it can crash. I strongly suggest you don't run it ... ever. The best thing to run on your system while folding using the GPU is only power savings mode and no screensaver.
As for the CPU load, that is normal for GPU2 work with an nVidia GPU. It will use very little CPU time. If you want to maximize your points for the FAH program, you might consider running SMP on your I7. Check around the forum and you will find lots of suggestions for running SMP on an I7. With a hefty overclock, you might even be able to run bigadv work units. If you are interested in a beta client, you might consider a try with the v7 client. It would allow you to run both GPU and SMP work units from one client. It seems pretty stable on most machines. Let us know if you need any help with any of this.
I'm guessing since you mentioned the viewer a couple of times that you are using it. The v6 client that you are running has a buggy viewer that is a real resource hog. At its best it steals large chunks of processing time from the GPU ... at its worst it can crash. I strongly suggest you don't run it ... ever. The best thing to run on your system while folding using the GPU is only power savings mode and no screensaver.
As for the CPU load, that is normal for GPU2 work with an nVidia GPU. It will use very little CPU time. If you want to maximize your points for the FAH program, you might consider running SMP on your I7. Check around the forum and you will find lots of suggestions for running SMP on an I7. With a hefty overclock, you might even be able to run bigadv work units. If you are interested in a beta client, you might consider a try with the v7 client. It would allow you to run both GPU and SMP work units from one client. It seems pretty stable on most machines. Let us know if you need any help with any of this.
Re: Client question and running issues
Thanks guys, it isn't finished yet, something around 90% done.
If it's at 100% then it renders my computer almost unuseable, so with that said I'll try out a different client. I might get off the GPU, as the 260 isn't exactly the most powerful thing out, it's around 5 tiers down now a days.
If it's at 100% then it renders my computer almost unuseable, so with that said I'll try out a different client. I might get off the GPU, as the 260 isn't exactly the most powerful thing out, it's around 5 tiers down now a days.
Re: Client question and running issues
GTX 260, shaders @ 1566:
1:30/frame that Steel is observing is in the fast g92 range of performance.
Code: Select all
Project ID: 10512
Core: GROGPU2
Credit: 587
Frames: 100
Name: ChasR GTX260
Path: E:\FAH GPU\GPU1
Number of Frames Observed: 300
Min. Time / Frame : 00:00:56 - 9,057 PPD
Avg. Time / Frame : 00:01:01 - 8,314 PPD