Project: 10200 (Run 0, Clone 2801, Gen 6)
Posted: Wed Dec 29, 2010 3:42 am
I'm reporting this since I don't see another post. I'm fairly new to folding, but I noted this project had a significantly higher TPF than any other project I've seen on my computers. Like 1hr 24min was the best time I saw (personally) when the machine was idle. This might be expected, and if so that's fine. 
I did note the deadline of this project was pretty far out.
I have to apologize up front for the restarts noted in the log. Two things happened: One, when I noticed the long TPF, I tried to check the configs and up the settings (core priority, disabling optimized assembly, core lock) based on searching around. The other is that our power was iffy for a few hours due to heavy snow/winds in North Carolina around the 26th, so I shut down during that time, though a few times it stoped folding because the battery came on.
I did note one interesting set of lines around 65% project complete:
[03:44:16] CoreStatus = 3 (3)
[03:44:16] Client-core communications error: ERROR 0x3
[03:44:16] This is a sign of more serious problems, shutting down.
After P10200 finished, the next project returned to a normal TPF (10:39 currently on P6885 (r4, c0, g51))
System specs:
AMD Turion 64 x2 @1600Mhz
4GB RAM
Windows 7
CPU client version 6.23 (Nov 26, 2008)
I did note the deadline of this project was pretty far out.I have to apologize up front for the restarts noted in the log. Two things happened: One, when I noticed the long TPF, I tried to check the configs and up the settings (core priority, disabling optimized assembly, core lock) based on searching around. The other is that our power was iffy for a few hours due to heavy snow/winds in North Carolina around the 26th, so I shut down during that time, though a few times it stoped folding because the battery came on.
Code: Select all
--- Opening Log file [December 20 03:07:19 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[03:07:19] - Ask before connecting: No
[03:07:19] - User name: Cybertimber2009 (Team 55186)
[03:07:19] - User ID: 2619B5C77CAC6F35
[03:07:19] - Machine ID: 1
[03:07:19]
[03:07:19] Loaded queue successfully.
[03:07:19] Initialization complete
[03:07:19]
[03:07:19] + Processing work unit
[03:07:19] Core required: FahCore_a4.exe
[03:07:19] Core found.
[03:07:19] Working on queue slot 07 [December 20 03:07:19 UTC]
[03:07:19] + Working ...
[03:07:20]
[03:07:20] *------------------------------*
[03:07:20] Folding@Home Gromacs GB Core
[03:07:20] Version 2.25 (Sept. 16, 2010)
[03:07:20]
[03:07:20] Preparing to commence simulation
[03:07:20] - Looking at optimizations...
[03:07:20] - Files status OK
[03:07:20] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:07:20] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:07:21] - Digital signature verified
[03:07:21]
[03:07:21] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:07:21]
[03:07:21] Assembly optimizations on if available.
[03:07:21] Entering M.D.
[03:07:27] Using Gromacs checkpoints
[03:07:28] Resuming from checkpoint
[03:07:28] Verified work/wudata_07.log
[03:07:29] Verified work/wudata_07.trr
[03:07:29] Verified work/wudata_07.xtc
[03:07:29] Verified work/wudata_07.edr
[03:07:34] Completed 1290 out of 250000 steps (0%)
[03:15:05] CoreStatus = 62 (98)
[03:15:05] + Restarting core (settings changed)
[03:15:05]
[03:15:05] + Processing work unit
[03:15:05] Core required: FahCore_a4.exe
[03:15:05] Core found.
[03:15:05] Working on queue slot 07 [December 20 03:15:05 UTC]
[03:15:05] + Working ...
[03:15:05]
[03:15:05] *------------------------------*
[03:15:05] Folding@Home Gromacs GB Core
[03:15:05] Version 2.25 (Sept. 16, 2010)
[03:15:05]
[03:15:05] Preparing to commence simulation
[03:15:05] - Ensuring status. Please wait.
[03:15:15] - Looking at optimizations...
[03:15:15] - Not checking prior termination.
[03:15:15] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:15:15] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:15:15] - Digital signature verified
[03:15:15]
[03:15:15] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:15:15]
[03:15:16] Assembly optimizations on if available.
[03:15:16] Entering M.D.
[03:15:22] Using Gromacs checkpoints
[03:15:23] Resuming from checkpoint
[03:15:23] Verified work/wudata_07.log
[03:15:23] Verified work/wudata_07.trr
[03:15:23] Verified work/wudata_07.xtc
[03:15:23] Verified work/wudata_07.edr
[03:15:32] Completed 1290 out of 250000 steps (0%)
[04:24:52] Completed 2500 out of 250000 steps (1%)
[06:48:26] Completed 5000 out of 250000 steps (2%)
[09:07:19] + Working...
[09:11:13] Completed 7500 out of 250000 steps (3%)
[11:34:09] Completed 10000 out of 250000 steps (4%)
[13:57:18] Completed 12500 out of 250000 steps (5%)
[15:07:19] + Working...
[16:19:13] Completed 15000 out of 250000 steps (6%)
[17:32:12] CoreStatus = 62 (98)
[17:32:12] + Restarting core (settings changed)
[17:32:12]
[17:32:12] + Processing work unit
[17:32:12] Core required: FahCore_a4.exe
[17:32:12] Core found.
[17:32:12] Working on queue slot 07 [December 20 17:32:12 UTC]
[17:32:12] + Working ...
[17:32:12]
[17:32:12] *------------------------------*
[17:32:12] Folding@Home Gromacs GB Core
[17:32:12] Version 2.25 (Sept. 16, 2010)
[17:32:12]
[17:32:12] Preparing to commence simulation
[17:32:12] - Ensuring status. Please wait.
[17:32:22] - Looking at optimizations...
[17:32:22] - Not checking prior termination.
[17:32:22] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[17:32:22] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[17:32:22] - Digital signature verified
[17:32:22]
[17:32:22] Project: 10200 (Run 0, Clone 2801, Gen 6)
[17:32:22]
[17:32:22] Assembly optimizations on if available.
[17:32:22] Entering M.D.
[17:32:28] Using Gromacs checkpoints
[17:32:29] Resuming from checkpoint
[17:32:29] Verified work/wudata_07.log
[17:32:29] Verified work/wudata_07.trr
[17:32:29] Verified work/wudata_07.xtc
[17:32:29] Verified work/wudata_07.edr
[17:32:33] Completed 16270 out of 250000 steps (6%)
[17:34:52] CoreStatus = 62 (98)
[17:34:52] + Restarting core (settings changed)
[17:34:52]
[17:34:52] + Processing work unit
[17:34:52] Core required: FahCore_a4.exe
[17:34:52] Core found.
[17:34:52] Working on queue slot 07 [December 20 17:34:52 UTC]
[17:34:52] + Working ...
[17:34:52]
[17:34:52] *------------------------------*
[17:34:52] Folding@Home Gromacs GB Core
[17:34:52] Version 2.25 (Sept. 16, 2010)
[17:34:52]
[17:34:52] Preparing to commence simulation
[17:34:52] - Ensuring status. Please wait.
[17:35:01] - Looking at optimizations...
[17:35:01] - Not checking prior termination.
[17:35:02] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[17:35:02] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[17:35:02] - Digital signature verified
[17:35:02]
[17:35:02] Project: 10200 (Run 0, Clone 2801, Gen 6)
[17:35:02]
[17:35:02] Assembly optimizations on if available.
[17:35:02] Entering M.D.
[17:35:08] Using Gromacs checkpoints
[17:35:09] Resuming from checkpoint
[17:35:09] Verified work/wudata_07.log
[17:35:09] Verified work/wudata_07.trr
[17:35:09] Verified work/wudata_07.xtc
[17:35:09] Verified work/wudata_07.edr
[17:35:13] Completed 16270 out of 250000 steps (6%)
[18:15:24] Completed 17500 out of 250000 steps (7%)
[19:33:21] Completed 20000 out of 250000 steps (8%)
[20:50:41] Completed 22500 out of 250000 steps (9%)
[21:07:19] + Working...
[22:08:02] Completed 25000 out of 250000 steps (10%)
[23:25:28] Completed 27500 out of 250000 steps (11%)
[00:42:47] Completed 30000 out of 250000 steps (12%)
[02:01:17] Completed 32500 out of 250000 steps (13%)
[03:07:19] + Working...
[03:18:42] Completed 35000 out of 250000 steps (14%)
[04:36:45] Completed 37500 out of 250000 steps (15%)
[05:07:06] + Paused
[05:07:38] mdrun returned 1
[05:07:38] Gromacs was interrupted
[05:07:38] Folding@home Core Shutdown: INTERRUPTED
[05:07:38] CoreStatus = 66 (102)
[05:07:38] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 21 05:21:41 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[05:21:41] - Ask before connecting: No
[05:21:41] - User name: Cybertimber2009 (Team 55186)
[05:21:41] - User ID: 2619B5C77CAC6F35
[05:21:41] - Machine ID: 1
[05:21:41]
[05:21:41] Loaded queue successfully.
[05:21:42] Initialization complete
[05:21:42]
[05:21:42] + Processing work unit
[05:21:42] Core required: FahCore_a4.exe
[05:21:42] Core found.
[05:21:42] Working on queue slot 07 [December 21 05:21:42 UTC]
[05:21:42] + Working ...
[05:21:42]
[05:21:42] *------------------------------*
[05:21:42] Folding@Home Gromacs GB Core
[05:21:42] Version 2.25 (Sept. 16, 2010)
[05:21:42]
[05:21:42] Preparing to commence simulation
[05:21:42] - Looking at optimizations...
[05:21:42] - Files status OK
[05:21:42] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[05:21:42] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[05:21:42] - Digital signature verified
[05:21:42]
[05:21:42] Project: 10200 (Run 0, Clone 2801, Gen 6)
[05:21:42]
[05:21:43] Assembly optimizations on if available.
[05:21:43] Entering M.D.
[05:21:49] Using Gromacs checkpoints
[05:21:49] Resuming from checkpoint
[05:21:49] Verified work/wudata_07.log
[05:21:49] Verified work/wudata_07.trr
[05:21:49] Verified work/wudata_07.xtc
[05:21:49] Verified work/wudata_07.edr
[05:21:54] Completed 38450 out of 250000 steps (15%)
[06:10:30] Completed 40000 out of 250000 steps (16%)
[07:28:03] Completed 42500 out of 250000 steps (17%)
[08:49:21] Completed 45000 out of 250000 steps (18%)
[10:07:44] Completed 47500 out of 250000 steps (19%)
[11:21:42] + Working...
[11:28:56] Completed 50000 out of 250000 steps (20%)
[12:49:09] Completed 52500 out of 250000 steps (21%)
[14:08:47] Completed 55000 out of 250000 steps (22%)
[15:33:47] Completed 57500 out of 250000 steps (23%)
[16:52:10] Completed 60000 out of 250000 steps (24%)
[17:21:42] + Working...
[17:49:50] + Paused
[17:50:21] mdrun returned 1
[17:50:21] Gromacs was interrupted
[17:50:21] Folding@home Core Shutdown: INTERRUPTED
[17:50:22] CoreStatus = 66 (102)
[17:50:22] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 21 19:16:11 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[19:16:11] - Ask before connecting: No
[19:16:11] - User name: Cybertimber2009 (Team 55186)
[19:16:11] - User ID: 2619B5C77CAC6F35
[19:16:11] - Machine ID: 1
[19:16:11]
[19:16:11] Loaded queue successfully.
[19:16:11] Initialization complete
[19:16:11]
[19:16:11] + Processing work unit
[19:16:11] Core required: FahCore_a4.exe
[19:16:11] Core found.
[19:16:11] Working on queue slot 07 [December 21 19:16:11 UTC]
[19:16:11] + Working ...
[19:16:11]
[19:16:11] *------------------------------*
[19:16:11] Folding@Home Gromacs GB Core
[19:16:11] Version 2.25 (Sept. 16, 2010)
[19:16:11]
[19:16:11] Preparing to commence simulation
[19:16:11] - Looking at optimizations...
[19:16:11] - Files status OK
[19:16:12] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[19:16:12] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[19:16:12] - Digital signature verified
[19:16:12]
[19:16:12] Project: 10200 (Run 0, Clone 2801, Gen 6)
[19:16:12]
[19:16:12] Assembly optimizations on if available.
[19:16:12] Entering M.D.
[19:16:18] Using Gromacs checkpoints
[19:16:19] Resuming from checkpoint
[19:16:19] Verified work/wudata_07.log
[19:16:19] Verified work/wudata_07.trr
[19:16:19] Verified work/wudata_07.xtc
[19:16:19] Verified work/wudata_07.edr
[19:16:24] Completed 61870 out of 250000 steps (24%)
[19:47:32] Completed 62500 out of 250000 steps (25%)
--- Opening Log file [December 21 20:56:28 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[20:56:28] - Ask before connecting: No
[20:56:28] - User name: Cybertimber2009 (Team 55186)
[20:56:28] - User ID: 2619B5C77CAC6F35
[20:56:28] - Machine ID: 1
[20:56:28]
[20:56:28] Loaded queue successfully.
[20:56:28] Initialization complete
[20:56:28]
[20:56:28] + Processing work unit
[20:56:28] Core required: FahCore_a4.exe
[20:56:28] Core found.
[20:56:29] Working on queue slot 07 [December 21 20:56:29 UTC]
[20:56:29] + Working ...
[20:56:30]
[20:56:30] *------------------------------*
[20:56:30] Folding@Home Gromacs GB Core
[20:56:30] Version 2.25 (Sept. 16, 2010)
[20:56:30]
[20:56:30] Preparing to commence simulation
[20:56:30] - Ensuring status. Please wait.
[20:56:40] - Looking at optimizations...
[20:56:40] - Working with standard loops on this execution.
[20:56:40] - Previous termination of core was improper.
[20:56:40] - Files status OK
[20:56:40] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[20:56:40] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[20:56:40] - Digital signature verified
[20:56:40]
[20:56:40] Project: 10200 (Run 0, Clone 2801, Gen 6)
[20:56:40]
[20:56:41] Entering M.D.
[20:56:47] Using Gromacs checkpoints
[20:56:49] Resuming from checkpoint
[20:56:50] Verified work/wudata_07.log
[20:56:50] Verified work/wudata_07.trr
[20:56:51] Verified work/wudata_07.xtc
[20:56:51] Verified work/wudata_07.edr
[20:57:00] Completed 62960 out of 250000 steps (25%)
[20:58:20] + Paused
[20:58:44] mdrun returned 1
[20:58:44] Gromacs was interrupted
[20:58:44] Folding@home Core Shutdown: INTERRUPTED
[20:58:44] CoreStatus = 66 (102)
[20:58:44] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 21 21:03:05 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[21:03:05] - Ask before connecting: No
[21:03:05] - User name: Cybertimber2009 (Team 55186)
[21:03:05] - User ID: 2619B5C77CAC6F35
[21:03:05] - Machine ID: 1
[21:03:05]
[21:03:05] Loaded queue successfully.
[21:03:05] Initialization complete
[21:03:05]
[21:03:05] + Processing work unit
[21:03:05] Core required: FahCore_a4.exe
[21:03:05] Core found.
[21:03:05] Working on queue slot 07 [December 21 21:03:05 UTC]
[21:03:05] + Working ...
[21:03:05]
[21:03:05] *------------------------------*
[21:03:05] Folding@Home Gromacs GB Core
[21:03:05] Version 2.25 (Sept. 16, 2010)
[21:03:05]
[21:03:05] Preparing to commence simulation
[21:03:05] - Looking at optimizations...
[21:03:05] - Files status OK
[21:03:06] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[21:03:06] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[21:03:06] - Digital signature verified
[21:03:06]
[21:03:06] Project: 10200 (Run 0, Clone 2801, Gen 6)
[21:03:06]
[21:03:06] Assembly optimizations on if available.
[21:03:06] Entering M.D.
[21:03:13] Using Gromacs checkpoints
[21:03:13] Resuming from checkpoint
[21:03:13] Verified work/wudata_07.log
[21:03:13] Verified work/wudata_07.trr
[21:03:13] Verified work/wudata_07.xtc
[21:03:13] Verified work/wudata_07.edr
[21:03:18] Completed 63010 out of 250000 steps (25%)
[21:12:08] CoreStatus = 62 (98)
[21:12:08] + Restarting core (settings changed)
[21:12:08]
[21:12:08] + Processing work unit
[21:12:08] Core required: FahCore_a4.exe
[21:12:08] Core found.
[21:12:08] Working on queue slot 07 [December 21 21:12:08 UTC]
[21:12:08] + Working ...
[21:12:08]
[21:12:08] *------------------------------*
[21:12:08] Folding@Home Gromacs GB Core
[21:12:08] Version 2.25 (Sept. 16, 2010)
[21:12:08]
[21:12:08] Preparing to commence simulation
[21:12:08] - Ensuring status. Please wait.
[21:12:18] - Looking at optimizations...
[21:12:18] - Not checking prior termination.
[21:12:18] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[21:12:18] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[21:12:19] - Digital signature verified
[21:12:19]
[21:12:19] Project: 10200 (Run 0, Clone 2801, Gen 6)
[21:12:19]
[21:12:19] Assembly optimizations on if available.
[21:12:19] Entering M.D.
[21:12:25] Using Gromacs checkpoints
[21:12:26] Resuming from checkpoint
[21:12:26] Verified work/wudata_07.log
[21:12:26] Verified work/wudata_07.trr
[21:12:26] Verified work/wudata_07.xtc
[21:12:26] Verified work/wudata_07.edr
[21:12:33] Completed 63010 out of 250000 steps (25%)
[22:47:14] Completed 65000 out of 250000 steps (26%)
[00:20:49] + Paused
[00:21:58] mdrun returned 1
[00:21:58] Gromacs was interrupted
[00:21:58] Folding@home Core Shutdown: INTERRUPTED
[00:21:58] CoreStatus = 66 (102)
[00:21:58] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 22 01:01:48 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[01:01:48] - Ask before connecting: No
[01:01:48] - User name: Cybertimber2009 (Team 55186)
[01:01:48] - User ID: 2619B5C77CAC6F35
[01:01:48] - Machine ID: 1
[01:01:48]
[01:01:48] Loaded queue successfully.
[01:01:48] Initialization complete
[01:01:48]
[01:01:48] + Processing work unit
[01:01:48] Core required: FahCore_a4.exe
[01:01:48] Core found.
[01:01:48] Working on queue slot 07 [December 22 01:01:48 UTC]
[01:01:48] + Working ...
[01:01:48]
[01:01:48] *------------------------------*
[01:01:48] Folding@Home Gromacs GB Core
[01:01:48] Version 2.25 (Sept. 16, 2010)
[01:01:48]
[01:01:48] Preparing to commence simulation
[01:01:48] - Looking at optimizations...
[01:01:48] - Files status OK
[01:01:49] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[01:01:49] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[01:01:49] - Digital signature verified
[01:01:49]
[01:01:49] Project: 10200 (Run 0, Clone 2801, Gen 6)
[01:01:49]
[01:01:49] Assembly optimizations on if available.
[01:01:49] Entering M.D.
[01:01:56] Using Gromacs checkpoints
[01:01:59] CoreStatus = 62 (98)
[01:01:59] + Restarting core (settings changed)
[01:01:59]
[01:01:59] + Processing work unit
[01:01:59] Core required: FahCore_a4.exe
[01:01:59] Core found.
[01:01:59] Working on queue slot 07 [December 22 01:01:59 UTC]
[01:01:59] + Working ...
[01:01:59]
[01:01:59] *------------------------------*
[01:01:59] Folding@Home Gromacs GB Core
[01:01:59] Version 2.25 (Sept. 16, 2010)
[01:01:59]
[01:01:59] Preparing to commence simulation
[01:01:59] - Ensuring status. Please wait.
[01:02:09] - Looking at optimizations...
[01:02:09] - Not checking prior termination.
[01:02:09] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[01:02:09] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[01:02:09] - Digital signature verified
[01:02:09]
[01:02:09] Project: 10200 (Run 0, Clone 2801, Gen 6)
[01:02:09]
[01:02:10] Assembly optimizations on if available.
[01:02:10] Entering M.D.
[01:02:16] Using Gromacs checkpoints
[01:02:17] Resuming from checkpoint
[01:02:17] Verified work/wudata_07.log
[01:02:17] Verified work/wudata_07.trr
[01:02:17] Verified work/wudata_07.xtc
[01:02:17] Verified work/wudata_07.edr
[01:02:27] Completed 66910 out of 250000 steps (26%)
[01:45:43] Completed 67500 out of 250000 steps (27%)
[03:40:41] CoreStatus = 62 (98)
[03:40:41] + Restarting core (settings changed)
[03:40:41]
[03:40:41] + Processing work unit
[03:40:41] Core required: FahCore_a4.exe
[03:40:41] Core found.
[03:40:41] Working on queue slot 07 [December 22 03:40:41 UTC]
[03:40:41] + Working ...
[03:40:42]
[03:40:42] *------------------------------*
[03:40:42] Folding@Home Gromacs GB Core
[03:40:42] Version 2.25 (Sept. 16, 2010)
[03:40:42]
[03:40:42] Preparing to commence simulation
[03:40:42] - Ensuring status. Please wait.
[03:40:51] - Looking at optimizations...
[03:40:51] - Not checking prior termination.
[03:40:52] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:40:52] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:40:52] - Digital signature verified
[03:40:52]
[03:40:52] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:40:52]
[03:40:52] Assembly optimizations on if available.
[03:40:52] Entering M.D.
[03:40:58] Using Gromacs checkpoints
[03:40:59] Resuming from checkpoint
[03:40:59] Verified work/wudata_07.log
[03:40:59] Verified work/wudata_07.trr
[03:40:59] Verified work/wudata_07.xtc
[03:40:59] Verified work/wudata_07.edr
[03:41:04] Completed 68970 out of 250000 steps (27%)
[03:46:57] CoreStatus = 62 (98)
[03:46:57] + Restarting core (settings changed)
[03:46:57]
[03:46:57] + Processing work unit
[03:46:57] Core required: FahCore_a4.exe
[03:46:57] Core found.
[03:46:57] Working on queue slot 07 [December 22 03:46:57 UTC]
[03:46:57] + Working ...
[03:46:57]
[03:46:57] *------------------------------*
[03:46:57] Folding@Home Gromacs GB Core
[03:46:57] Version 2.25 (Sept. 16, 2010)
[03:46:57]
[03:46:57] Preparing to commence simulation
[03:46:57] - Ensuring status. Please wait.
[03:47:06] - Looking at optimizations...
[03:47:06] - Not checking prior termination.
[03:47:07] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:47:07] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:47:07] - Digital signature verified
[03:47:07]
[03:47:07] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:47:07]
[03:47:07] Assembly optimizations on if available.
[03:47:07] Entering M.D.
[03:47:13] Using Gromacs checkpoints
[03:47:14] Resuming from checkpoint
[03:47:14] Verified work/wudata_07.log
[03:47:14] Verified work/wudata_07.trr
[03:47:14] Verified work/wudata_07.xtc
[03:47:14] Verified work/wudata_07.edr
[03:47:21] Completed 68970 out of 250000 steps (27%)
[04:29:49] Completed 70000 out of 250000 steps (28%)
[05:16:13] Opening C:\Users\Nick\AppData\Roaming\Folding@home-x86\MyFolding.html...
[05:31:12] + Paused
[05:31:55] mdrun returned 1
[05:31:55] Gromacs was interrupted
[05:31:55] Folding@home Core Shutdown: INTERRUPTED
[05:31:56] CoreStatus = 66 (102)
[05:31:56] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 22 05:33:31 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[05:33:31] - Ask before connecting: No
[05:33:31] - User name: Cybertimber2009 (Team 55186)
[05:33:31] - User ID: 2619B5C77CAC6F35
[05:33:31] - Machine ID: 1
[05:33:31]
[05:33:31] Loaded queue successfully.
[05:33:31] Initialization complete
[05:33:31]
[05:33:31] + Processing work unit
[05:33:31] Core required: FahCore_a4.exe
[05:33:31] Core found.
[05:33:31] Working on queue slot 07 [December 22 05:33:31 UTC]
[05:33:31] + Working ...
[05:33:32]
[05:33:32] *------------------------------*
[05:33:32] Folding@Home Gromacs GB Core
[05:33:32] Version 2.25 (Sept. 16, 2010)
[05:33:32]
[05:33:32] Preparing to commence simulation
[05:33:32] - Looking at optimizations...
[05:33:32] - Files status OK
[05:33:32] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[05:33:32] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[05:33:32] - Digital signature verified
[05:33:32]
[05:33:32] Project: 10200 (Run 0, Clone 2801, Gen 6)
[05:33:32]
[05:33:33] Assembly optimizations on if available.
[05:33:33] Entering M.D.
[05:33:39] Using Gromacs checkpoints
[05:33:39] Resuming from checkpoint
[05:33:40] Verified work/wudata_07.log
[05:33:40] Verified work/wudata_07.trr
[05:33:40] Verified work/wudata_07.xtc
[05:33:40] Verified work/wudata_07.edr
[05:33:46] Completed 71440 out of 250000 steps (28%)
[06:16:37] Completed 72500 out of 250000 steps (29%)
[07:57:30] Completed 75000 out of 250000 steps (30%)
[09:37:42] Completed 77500 out of 250000 steps (31%)
[11:18:30] Completed 80000 out of 250000 steps (32%)
[11:33:31] + Working...
[12:58:41] Completed 82500 out of 250000 steps (33%)
[14:39:10] Completed 85000 out of 250000 steps (34%)
[16:20:15] Completed 87500 out of 250000 steps (35%)
[17:33:31] + Working...
[18:04:48] Completed 90000 out of 250000 steps (36%)
[19:45:32] Completed 92500 out of 250000 steps (37%)
[21:26:45] Completed 95000 out of 250000 steps (38%)
[23:09:20] Completed 97500 out of 250000 steps (39%)
[23:33:31] + Working...
[00:51:23] Completed 100000 out of 250000 steps (40%)
[02:34:17] Completed 102500 out of 250000 steps (41%)
[04:17:54] Completed 105000 out of 250000 steps (42%)
[05:33:31] + Working...
[05:40:30] + Paused
[05:41:10] mdrun returned 1
[05:41:10] Gromacs was interrupted
[05:41:10] Folding@home Core Shutdown: INTERRUPTED
[05:41:10] CoreStatus = 66 (102)
[05:41:10] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 23 15:23:28 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[15:23:28] - Ask before connecting: No
[15:23:28] - User name: Cybertimber2009 (Team 55186)
[15:23:28] - User ID: 2619B5C77CAC6F35
[15:23:28] - Machine ID: 1
[15:23:28]
[15:23:28] Loaded queue successfully.
[15:23:28] Initialization complete
[15:23:28]
[15:23:28] + Processing work unit
[15:23:29] Core required: FahCore_a4.exe
[15:23:29] Core found.
[15:23:29] Working on queue slot 07 [December 23 15:23:29 UTC]
[15:23:29] + Working ...
[15:23:30]
[15:23:30] *------------------------------*
[15:23:30] Folding@Home Gromacs GB Core
[15:23:30] Version 2.25 (Sept. 16, 2010)
[15:23:31]
[15:23:31] Preparing to commence simulation
[15:23:31] - Looking at optimizations...
[15:23:31] - Files status OK
[15:23:32] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[15:23:32] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[15:23:32] - Digital signature verified
[15:23:32]
[15:23:32] Project: 10200 (Run 0, Clone 2801, Gen 6)
[15:23:32]
[15:23:33] Assembly optimizations on if available.
[15:23:33] Entering M.D.
[15:23:40] Using Gromacs checkpoints
[15:23:44] Resuming from checkpoint
[15:23:45] Verified work/wudata_07.log
[15:23:45] Verified work/wudata_07.trr
[15:23:45] Verified work/wudata_07.xtc
[15:23:46] Verified work/wudata_07.edr
[15:23:55] Completed 106740 out of 250000 steps (42%)
[15:55:21] Completed 107500 out of 250000 steps (43%)
[17:47:31] Completed 110000 out of 250000 steps (44%)
[19:27:44] + Paused
[19:28:39] mdrun returned 1
[19:28:39] Gromacs was interrupted
[19:28:39] Folding@home Core Shutdown: INTERRUPTED
[19:28:40] CoreStatus = 66 (102)
[19:28:40] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 23 19:45:25 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[19:45:25] - Ask before connecting: No
[19:45:25] - User name: Cybertimber2009 (Team 55186)
[19:45:25] - User ID: 2619B5C77CAC6F35
[19:45:25] - Machine ID: 1
[19:45:25]
[19:45:25] Loaded queue successfully.
[19:45:25] Initialization complete
[19:45:25]
[19:45:25] + Processing work unit
[19:45:25] Core required: FahCore_a4.exe
[19:45:25] Core found.
[19:45:25] Working on queue slot 07 [December 23 19:45:25 UTC]
[19:45:25] + Working ...
[19:45:25]
[19:45:25] *------------------------------*
[19:45:25] Folding@Home Gromacs GB Core
[19:45:25] Version 2.25 (Sept. 16, 2010)
[19:45:25]
[19:45:25] Preparing to commence simulation
[19:45:25] - Looking at optimizations...
[19:45:25] - Files status OK
[19:45:26] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[19:45:26] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[19:45:26] - Digital signature verified
[19:45:26]
[19:45:26] Project: 10200 (Run 0, Clone 2801, Gen 6)
[19:45:26]
[19:45:26] Assembly optimizations on if available.
[19:45:26] Entering M.D.
[19:45:32] Using Gromacs checkpoints
[19:45:33] Resuming from checkpoint
[19:45:33] Verified work/wudata_07.log
[19:45:33] Verified work/wudata_07.trr
[19:45:33] Verified work/wudata_07.xtc
[19:45:33] Verified work/wudata_07.edr
[19:45:39] Completed 112460 out of 250000 steps (44%)
[19:47:16] Completed 112500 out of 250000 steps (45%)
[21:29:22] Completed 115000 out of 250000 steps (46%)
[22:12:49] Opening http://foldingforum.org/...
[23:11:28] Completed 117500 out of 250000 steps (47%)
[00:04:31] + Paused
[00:05:10] mdrun returned 1
[00:05:10] Gromacs was interrupted
[00:05:10] Folding@home Core Shutdown: INTERRUPTED
[00:05:10] CoreStatus = 66 (102)
[00:05:10] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 24 00:06:41 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[00:06:41] - Ask before connecting: No
[00:06:41] - User name: Cybertimber2009 (Team 55186)
[00:06:41] - User ID: 2619B5C77CAC6F35
[00:06:41] - Machine ID: 1
[00:06:41]
[00:06:41] Loaded queue successfully.
[00:06:41] Initialization complete
[00:06:41]
[00:06:41] + Processing work unit
[00:06:41] Core required: FahCore_a4.exe
[00:06:41] Core found.
[00:06:41] Working on queue slot 07 [December 24 00:06:41 UTC]
[00:06:41] + Working ...
[00:06:41]
[00:06:41] *------------------------------*
[00:06:41] Folding@Home Gromacs GB Core
[00:06:41] Version 2.25 (Sept. 16, 2010)
[00:06:41]
[00:06:41] Preparing to commence simulation
[00:06:41] - Looking at optimizations...
[00:06:41] - Files status OK
[00:06:42] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[00:06:42] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[00:06:42] - Digital signature verified
[00:06:42]
[00:06:42] Project: 10200 (Run 0, Clone 2801, Gen 6)
[00:06:42]
[00:06:43] Assembly optimizations on if available.
[00:06:43] Entering M.D.
[00:06:49] Using Gromacs checkpoints
[00:06:49] Resuming from checkpoint
[00:06:50] Verified work/wudata_07.log
[00:06:50] Verified work/wudata_07.trr
[00:06:50] Verified work/wudata_07.xtc
[00:06:50] Verified work/wudata_07.edr
[00:06:56] Completed 118730 out of 250000 steps (47%)
[00:39:00] + Paused
[00:39:40] mdrun returned 1
[00:39:40] Gromacs was interrupted
[00:39:40] Folding@home Core Shutdown: INTERRUPTED
[00:39:40] CoreStatus = 66 (102)
[00:39:40] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 24 00:42:21 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[00:42:21] - Ask before connecting: No
[00:42:21] - User name: Cybertimber2009 (Team 55186)
[00:42:21] - User ID: 2619B5C77CAC6F35
[00:42:21] - Machine ID: 1
[00:42:21]
[00:42:21] Loaded queue successfully.
[00:42:21] Initialization complete
[00:42:21]
[00:42:21] + Processing work unit
[00:42:21] Core required: FahCore_a4.exe
[00:42:21] Core found.
[00:42:23] Working on queue slot 07 [December 24 00:42:23 UTC]
[00:42:23] + Working ...
[00:42:24]
[00:42:24] *------------------------------*
[00:42:24] Folding@Home Gromacs GB Core
[00:42:24] Version 2.25 (Sept. 16, 2010)
[00:42:24]
[00:42:24] Preparing to commence simulation
[00:42:24] - Looking at optimizations...
[00:42:25] - Files status OK
[00:42:25] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[00:42:25] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[00:42:25] - Digital signature verified
[00:42:25]
[00:42:25] Project: 10200 (Run 0, Clone 2801, Gen 6)
[00:42:25]
[00:42:26] Assembly optimizations on if available.
[00:42:26] Entering M.D.
[00:42:32] Using Gromacs checkpoints
[00:42:40] Resuming from checkpoint
[00:42:40] Verified work/wudata_07.log
[00:42:40] Verified work/wudata_07.trr
[00:42:40] Verified work/wudata_07.xtc
[00:42:40] Verified work/wudata_07.edr
[00:42:52] Completed 119490 out of 250000 steps (47%)
[01:03:55] Completed 120000 out of 250000 steps (48%)
[02:45:35] Completed 122500 out of 250000 steps (49%)
--- Opening Log file [December 24 03:09:02 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[03:09:02] - Ask before connecting: No
[03:09:02] - User name: Cybertimber2009 (Team 55186)
[03:09:02] - User ID: 2619B5C77CAC6F35
[03:09:02] - Machine ID: 1
[03:09:02]
[03:09:02] Loaded queue successfully.
[03:09:02] Initialization complete
[03:09:03]
[03:09:03] + Processing work unit
[03:09:03] Core required: FahCore_a4.exe
[03:09:03] Core found.
[03:09:04] Working on queue slot 07 [December 24 03:09:04 UTC]
[03:09:04] + Working ...
[03:09:06]
[03:09:06] *------------------------------*
[03:09:06] Folding@Home Gromacs GB Core
[03:09:06] Version 2.25 (Sept. 16, 2010)
[03:09:06]
[03:09:06] Preparing to commence simulation
[03:09:06] - Ensuring status. Please wait.
[03:09:16] - Looking at optimizations...
[03:09:16] - Working with standard loops on this execution.
[03:09:16] - Previous termination of core was improper.
[03:09:16] - Files status OK
[03:09:18] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:09:18] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:09:18] - Digital signature verified
[03:09:18]
[03:09:18] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:09:18]
[03:09:19] Entering M.D.
[03:09:25] Using Gromacs checkpoints
[03:09:26] Resuming from checkpoint
[03:09:27] Verified work/wudata_07.log
[03:09:27] Verified work/wudata_07.trr
[03:09:27] Verified work/wudata_07.xtc
[03:09:27] Verified work/wudata_07.edr
[03:09:35] Completed 122820 out of 250000 steps (49%)
[03:39:44] CoreStatus = 62 (98)
[03:39:44] + Restarting core (settings changed)
[03:39:44]
[03:39:44] + Processing work unit
[03:39:44] Core required: FahCore_a4.exe
[03:39:44] Core found.
[03:39:44] Working on queue slot 07 [December 24 03:39:44 UTC]
[03:39:44] + Working ...
[03:39:44]
[03:39:44] *------------------------------*
[03:39:44] Folding@Home Gromacs GB Core
[03:39:44] Version 2.25 (Sept. 16, 2010)
[03:39:44]
[03:39:44] Preparing to commence simulation
[03:39:44] - Ensuring status. Please wait.
[03:39:53] - Looking at optimizations...
[03:39:53] - Not checking prior termination.
[03:39:54] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:39:54] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:39:54] - Digital signature verified
[03:39:54]
[03:39:54] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:39:54]
[03:39:54] Assembly optimizations on if available.
[03:39:54] Entering M.D.
[03:40:00] Using Gromacs checkpoints
[03:40:01] Resuming from checkpoint
[03:40:01] Verified work/wudata_07.log
[03:40:01] Verified work/wudata_07.trr
[03:40:01] Verified work/wudata_07.xtc
[03:40:01] Verified work/wudata_07.edr
[03:40:04] Completed 123200 out of 250000 steps (49%)
[04:22:54] + Paused
[04:23:02] + Working ...
[04:23:06] CoreStatus = 62 (98)
[04:23:06] + Restarting core (settings changed)
[04:23:06]
[04:23:06] + Processing work unit
[04:23:06] Core required: FahCore_a4.exe
[04:23:06] Core found.
[04:23:06] Working on queue slot 07 [December 24 04:23:06 UTC]
[04:23:06] + Working ...
[04:23:06]
[04:23:06] *------------------------------*
[04:23:06] Folding@Home Gromacs GB Core
[04:23:06] Version 2.25 (Sept. 16, 2010)
[04:23:06]
[04:23:06] Preparing to commence simulation
[04:23:06] - Ensuring status. Please wait.
[04:23:16] - Looking at optimizations...
[04:23:16] - Not checking prior termination.
[04:23:16] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[04:23:16] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[04:23:16] - Digital signature verified
[04:23:16]
[04:23:16] Project: 10200 (Run 0, Clone 2801, Gen 6)
[04:23:16]
[04:23:17] Assembly optimizations on if available.
[04:23:17] Entering M.D.
[04:23:22] Using Gromacs checkpoints
[04:23:23] Resuming from checkpoint
[04:23:23] Verified work/wudata_07.log
[04:23:23] Verified work/wudata_07.trr
[04:23:23] Verified work/wudata_07.xtc
[04:23:23] Verified work/wudata_07.edr
[04:23:28] Completed 124340 out of 250000 steps (49%)
[04:46:12] Completed 125000 out of 250000 steps (50%)
[06:11:57] Completed 127500 out of 250000 steps (51%)
[07:37:31] Completed 130000 out of 250000 steps (52%)
[09:03:35] Completed 132500 out of 250000 steps (53%)
[09:09:03] + Working...
[10:29:22] Completed 135000 out of 250000 steps (54%)
[11:55:34] Completed 137500 out of 250000 steps (55%)
[13:21:33] Completed 140000 out of 250000 steps (56%)
[14:22:38] CoreStatus = 62 (98)
[14:22:38] + Restarting core (settings changed)
[14:22:38]
[14:22:38] + Processing work unit
[14:22:38] Core required: FahCore_a4.exe
[14:22:38] Core found.
[14:22:38] Working on queue slot 07 [December 24 14:22:38 UTC]
[14:22:38] + Working ...
[14:22:38]
[14:22:38] *------------------------------*
[14:22:38] Folding@Home Gromacs GB Core
[14:22:38] Version 2.25 (Sept. 16, 2010)
[14:22:38]
[14:22:38] Preparing to commence simulation
[14:22:38] - Ensuring status. Please wait.
[14:22:48] - User disabled assembly optimizations.
[14:22:48] - Not checking prior termination.
[14:22:48] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[14:22:48] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[14:22:48] - Digital signature verified
[14:22:48]
[14:22:48] Project: 10200 (Run 0, Clone 2801, Gen 6)
[14:22:48]
[14:22:48] Entering M.D.
[14:22:54] Using Gromacs checkpoints
[14:22:55] Resuming from checkpoint
[14:22:55] Verified work/wudata_07.log
[14:22:55] Verified work/wudata_07.trr
[14:22:55] Verified work/wudata_07.xtc
[14:22:55] Verified work/wudata_07.edr
[14:23:00] Completed 141380 out of 250000 steps (56%)
[15:02:27] Completed 142500 out of 250000 steps (57%)
[15:09:03] + Working...
[16:29:48] Completed 145000 out of 250000 steps (58%)
[17:57:28] Completed 147500 out of 250000 steps (59%)
[19:26:47] Completed 150000 out of 250000 steps (60%)
[19:59:21] Opening http://fah-web.stanford.edu/cgi-bin/main.py?qtype=userpage&username=Cybertimber2009...
[20:55:38] Completed 152500 out of 250000 steps (61%)
[21:09:03] + Working...
[22:24:09] Completed 155000 out of 250000 steps (62%)
[23:56:40] Completed 157500 out of 250000 steps (63%)
[01:29:35] Completed 160000 out of 250000 steps (64%)
[02:58:03] Completed 162500 out of 250000 steps (65%)
[03:09:03] + Working...
[03:42:40] + Paused
[03:42:41] CoreStatus = 62 (98)
[03:42:41] + Restarting core (settings changed)
[03:42:41]
[03:42:41] + Processing work unit
[03:42:41] Core required: FahCore_a4.exe
[03:42:41] Core found.
[03:42:41] Working on queue slot 07 [December 25 03:42:41 UTC]
[03:42:41] + Working ...
[03:44:11] + Working ...
[03:44:11]
[03:44:11] *------------------------------*
[03:44:11] Folding@Home Gromacs GB Core
[03:44:11] Version 2.25 (Sept. 16, 2010)
[03:44:11]
[03:44:11] Preparing to commence simulation
[03:44:11] - Ensuring status. Please wait.
[03:44:11] - Looking at optimizations...
[03:44:11] - Not checking prior termination.
[03:44:11] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:44:11] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:44:11] - Digital signature verified
[03:44:11]
[03:44:11] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:44:11]
[03:44:11] Assembly optimizations on if available.
[03:44:11] Entering M.D.
[03:44:11] Using Gromacs checkpoints
[03:44:11] Resuming from checkpoint
[03:44:11] Verified work/wudata_07.log
[03:44:11] Verified work/wudata_07.trr
[03:44:11] Verified work/wudata_07.xtc
[03:44:11] Verified work/wudata_07.edr
[03:44:11] Completed 163620 out of 250000 steps (65%)
[03:44:13] + Paused
[03:44:16] CoreStatus = 3 (3)
[03:44:16] Client-core communications error: ERROR 0x3
[03:44:16] This is a sign of more serious problems, shutting down.
--- Opening Log file [December 25 03:58:39 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[03:58:40] - Ask before connecting: No
[03:58:40] - User name: Cybertimber2009 (Team 55186)
[03:58:40] - User ID: 2619B5C77CAC6F35
[03:58:40] - Machine ID: 1
[03:58:40]
[03:58:40] Loaded queue successfully.
[03:58:40] Initialization complete
[03:58:40]
[03:58:40] + Processing work unit
[03:58:40] Core required: FahCore_a4.exe
[03:58:40] Core found.
[03:58:40] Working on queue slot 07 [December 25 03:58:40 UTC]
[03:58:40] + Working ...
[03:58:42]
[03:58:42] *------------------------------*
[03:58:42] Folding@Home Gromacs GB Core
[03:58:42] Version 2.25 (Sept. 16, 2010)
[03:58:42]
[03:58:42] Preparing to commence simulation
[03:58:42] - Ensuring status. Please wait.
[03:58:52] - Looking at optimizations...
[03:58:52] - Working with standard loops on this execution.
[03:58:52] - Previous termination of core was improper.
[03:58:52] - Going to use standard loops.
[03:58:52] - Files status OK
[03:58:52] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[03:58:52] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[03:58:52] - Digital signature verified
[03:58:52]
[03:58:52] Project: 10200 (Run 0, Clone 2801, Gen 6)
[03:58:52]
[03:58:52] Entering M.D.
[03:58:58] Using Gromacs checkpoints
[03:58:59] Resuming from checkpoint
[03:59:00] Verified work/wudata_07.log
[03:59:00] Verified work/wudata_07.trr
[03:59:00] Verified work/wudata_07.xtc
[03:59:00] Verified work/wudata_07.edr
[03:59:09] Completed 163620 out of 250000 steps (65%)
[04:47:39] Completed 165000 out of 250000 steps (66%)
[06:15:13] Completed 167500 out of 250000 steps (67%)
[07:42:43] Completed 170000 out of 250000 steps (68%)
[09:10:05] Completed 172500 out of 250000 steps (69%)
[09:58:40] + Working...
[10:37:28] Completed 175000 out of 250000 steps (70%)
[12:04:51] Completed 177500 out of 250000 steps (71%)
[13:32:49] Completed 180000 out of 250000 steps (72%)
[15:00:42] Completed 182500 out of 250000 steps (73%)
[15:58:40] + Working...
[16:28:31] Completed 185000 out of 250000 steps (74%)
[17:57:37] Completed 187500 out of 250000 steps (75%)
[19:27:26] Completed 190000 out of 250000 steps (76%)
[20:56:34] Completed 192500 out of 250000 steps (77%)
[21:58:40] + Working...
[22:33:11] Completed 195000 out of 250000 steps (78%)
[00:08:31] Completed 197500 out of 250000 steps (79%)
[00:48:28] Opening http://fah-web.stanford.edu/cgi-bin/main.py?qtype=userpage&username=Cybertimber2009...
[01:37:18] Completed 200000 out of 250000 steps (80%)
[03:05:07] Completed 202500 out of 250000 steps (81%)
[03:58:40] + Working...
[04:33:08] Completed 205000 out of 250000 steps (82%)
[06:01:56] Completed 207500 out of 250000 steps (83%)
[07:29:17] Completed 210000 out of 250000 steps (84%)
[08:56:41] Completed 212500 out of 250000 steps (85%)
[09:58:40] + Working...
[10:23:54] Completed 215000 out of 250000 steps (86%)
[11:51:12] Completed 217500 out of 250000 steps (87%)
[13:05:17] + Paused
[13:05:17] + Running on battery power. Pausing work until computer is plugged in.
[13:06:10] mdrun returned 1
[13:06:10] Gromacs was interrupted
[13:06:10] Folding@home Core Shutdown: INTERRUPTED
[13:06:10] CoreStatus = 66 (102)
[13:06:10] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
--- Opening Log file [December 26 13:29:16 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Nick\AppData\Roaming\Folding@home-x86
[13:29:16] - Ask before connecting: No
[13:29:16] - User name: Cybertimber2009 (Team 55186)
[13:29:16] - User ID: 2619B5C77CAC6F35
[13:29:16] - Machine ID: 1
[13:29:16]
[13:29:16] Loaded queue successfully.
[13:29:16] Initialization complete
[13:29:16]
[13:29:16] + Processing work unit
[13:29:17] Core required: FahCore_a4.exe
[13:29:17] Core found.
[13:29:17] Working on queue slot 07 [December 26 13:29:17 UTC]
[13:29:17] + Working ...
[13:29:18]
[13:29:18] *------------------------------*
[13:29:18] Folding@Home Gromacs GB Core
[13:29:18] Version 2.25 (Sept. 16, 2010)
[13:29:18]
[13:29:18] Preparing to commence simulation
[13:29:18] - Looking at optimizations...
[13:29:18] - Files status OK
[13:29:19] - Expanded 1521814 -> 2956216 (decompressed 194.2 percent)
[13:29:19] Called DecompressByteArray: compressed_data_size=1521814 data_size=2956216, decompressed_data_size=2956216 diff=0
[13:29:19] - Digital signature verified
[13:29:19]
[13:29:19] Project: 10200 (Run 0, Clone 2801, Gen 6)
[13:29:19]
[13:29:19] Assembly optimizations on if available.
[13:29:19] Entering M.D.
[13:29:26] Using Gromacs checkpoints
[13:29:31] Resuming from checkpoint
[13:29:32] Verified work/wudata_07.log
[13:29:32] Verified work/wudata_07.trr
[13:29:32] Verified work/wudata_07.xtc
[13:29:32] Verified work/wudata_07.edr
[13:29:41] Completed 219630 out of 250000 steps (87%)
[13:43:37] Completed 220000 out of 250000 steps (88%)
[15:13:39] Completed 222500 out of 250000 steps (89%)
[16:41:57] Completed 225000 out of 250000 steps (90%)
[18:10:53] Completed 227500 out of 250000 steps (91%)
[19:29:16] + Working...
[19:38:55] Completed 230000 out of 250000 steps (92%)
[21:06:36] Completed 232500 out of 250000 steps (93%)
[22:34:12] Completed 235000 out of 250000 steps (94%)
[00:02:09] Completed 237500 out of 250000 steps (95%)
[01:29:16] + Working...
[01:31:02] Completed 240000 out of 250000 steps (96%)
[02:58:38] Completed 242500 out of 250000 steps (97%)
[04:37:56] Completed 245000 out of 250000 steps (98%)
[06:06:00] Completed 247500 out of 250000 steps (99%)
[07:29:16] + Working...
[07:33:38] Completed 250000 out of 250000 steps (100%)
[07:33:40] DynamicWrapper: Finished Work Unit: sleep=10000
[07:33:50]
[07:33:50] Finished Work Unit:
[07:33:50] - Reading up to 2822352 from "work/wudata_07.trr": Read 2822352
[07:33:50] trr file hash check passed.
[07:33:50] - Reading up to 434500 from "work/wudata_07.xtc": Read 434500
[07:33:50] xtc file hash check passed.
[07:33:50] edr file hash check passed.
[07:33:50] logfile size: 98380
[07:33:50] Leaving Run
[07:33:50] - Writing 3373260 bytes of core data to disk...
[07:33:53] Done: 3372748 -> 3125412 (compressed to 92.6 percent)
[07:33:53] ... Done.
[07:33:55] - Shutting down core
[07:33:55]
[07:33:55] Folding@home Core Shutdown: FINISHED_UNIT
[07:34:00] CoreStatus = 64 (100)
[07:34:00] Sending work to server
[07:34:00] Project: 10200 (Run 0, Clone 2801, Gen 6)
[07:34:00] + Attempting to send results [December 27 07:34:00 UTC]
[07:34:52] + Results successfully sent
[07:34:52] Thank you for your contribution to Folding@Home.
[07:34:52] + Number of Units Completed: 7
[07:34:56] - Preparing to get new work unit...
[07:34:56] + Attempting to get work packet
[07:34:56] - Connecting to assignment server
[07:34:57] - Successful: assigned to (171.67.108.33).
[07:34:57] + News From Folding@Home: Welcome to Folding@Home
[07:34:57] Loaded queue successfully.
[07:35:01] + Closed connections[03:44:16] CoreStatus = 3 (3)
[03:44:16] Client-core communications error: ERROR 0x3
[03:44:16] This is a sign of more serious problems, shutting down.
After P10200 finished, the next project returned to a normal TPF (10:39 currently on P6885 (r4, c0, g51))
System specs:
AMD Turion 64 x2 @1600Mhz
4GB RAM
Windows 7
CPU client version 6.23 (Nov 26, 2008)
Didn't know about the last bit though, but it makes since (+/-10%).