171.64.65.64 - Cannot Upload WU's
Posted: Wed Dec 15, 2010 7:07 pm
It appears my GPU3 clients haven't been able to connect to this server since 12/13! Here is the log of just one of my clients:
I have a total of 5 gpu's that have been impacted by this... due to the length of my logs, I cannot upload the entire file let alone all 5? It appears there are a number of issues lately with connection problems.... is this being looked into?
Code: Select all
[18:26:22] Completed 49999999 out of 50000000 steps (100%).
[18:26:22] Finished fah_main
[18:26:22]
[18:26:22] Successful run
[18:26:22] DynamicWrapper: Finished Work Unit: sleep=10000
[18:26:33] Reserved 2454388 bytes for xtc file; Cosm status=0
[18:26:33] Allocated 2454388 bytes for xtc file
[18:26:33] - Reading up to 2454388 from "work/wudata_03.xtc": Read 2454388
[18:26:33] Read 2454388 bytes from xtc file; available packet space=783976076
[18:26:33] xtc file hash check passed.
[18:26:33] Reserved 75840 75840 783976076 bytes for arc file=<work/wudata_03.trr> Cosm status=0
[18:26:33] Allocated 75840 bytes for arc file
[18:26:33] - Reading up to 75840 from "work/wudata_03.trr": Read 75840
[18:26:33] Read 75840 bytes from arc file; available packet space=783900236
[18:26:33] trr file hash check passed.
[18:26:33] Allocated 544 bytes for edr file
[18:26:33] Read bedfile
[18:26:33] edr file hash check passed.
[18:26:33] Allocated 121133 bytes for logfile
[18:26:33] Read logfile
[18:26:33] GuardedRun: success in DynamicWrapper
[18:26:33] GuardedRun: done
[18:26:33] Run: GuardedRun completed.
[18:26:34] + Opened results file
[18:26:34] - Writing 2652417 bytes of core data to disk...
[18:26:35] Done: 2651905 -> 2494390 (compressed to 94.0 percent)
[18:26:35] ... Done.
[18:26:35] DeleteFrameFiles: successfully deleted file=work/wudata_03.ckp
[18:26:35] Shutting down core
[18:26:35]
[18:26:35] Folding@home Core Shutdown: FINISHED_UNIT
[18:26:37] CoreStatus = 64 (100)
[18:26:37] Sending work to server
[18:26:37] Project: 6800 (Run 4586, Clone 2, Gen 29)
[18:26:37] + Attempting to send results [December 15 18:26:37 UTC]
[18:26:37] Gpu type=3 species=0.
[18:26:53] + Results successfully sent
[18:26:53] Thank you for your contribution to Folding@Home.
[18:26:53] + Number of Units Completed: 796
[18:26:57] Project: 6800 (Run 4941, Clone 2, Gen 8)
[18:26:57] + Attempting to send results [December 15 18:26:57 UTC]
[18:26:57] Gpu type=3 species=0.
[18:27:59] - Couldn't send HTTP request to server
[18:27:59] + Could not connect to Work Server (results)
[18:27:59] (171.64.65.64:8080)
[18:27:59] + Retrying using alternative port
[18:29:00] - Couldn't send HTTP request to server
[18:29:00] + Could not connect to Work Server (results)
[18:29:00] (171.64.65.64:80)
[18:29:00] - Error: Could not transmit unit 07 (completed December 13) to work server.
[18:29:00] + Attempting to send results [December 15 18:29:00 UTC]
[18:29:00] Gpu type=3 species=0.
[18:30:04] - Couldn't send HTTP request to server
[18:30:04] + Could not connect to Work Server (results)
[18:30:04] (171.67.108.26:8080)
[18:30:04] + Retrying using alternative port
[18:30:05] - Couldn't send HTTP request to server
[18:30:05] + Could not connect to Work Server (results)
[18:30:05] (171.67.108.26:80)
[18:30:05] Could not transmit unit 07 to Collection server; keeping in queue.
[18:30:05] - Preparing to get new work unit...
[18:30:05] Cleaning up work directory
[18:30:05] + Attempting to get work packet
[18:30:05] Passkey found
[18:30:05] Gpu type=3 species=0.
[18:30:05] - Connecting to assignment server
[18:30:06] - Successful: assigned to (171.64.65.64).
[18:30:06] + News From Folding@Home: Welcome to Folding@Home
[18:30:06] Loaded queue successfully.
[18:30:06] Gpu type=3 species=0.
[18:30:06] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[18:30:11] + Attempting to get work packet
[18:30:11] Passkey found
[18:30:11] Gpu type=3 species=0.
[18:30:11] - Connecting to assignment server
[18:30:11] - Successful: assigned to (171.64.65.64).
[18:30:11] + News From Folding@Home: Welcome to Folding@Home
[18:30:11] Loaded queue successfully.
[18:30:11] Gpu type=3 species=0.
[18:30:11] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[18:30:29] + Attempting to get work packet
[18:30:29] Passkey found
[18:30:29] Gpu type=3 species=0.
[18:30:29] - Connecting to assignment server
[18:30:29] - Successful: assigned to (171.64.65.64).
[18:30:29] + News From Folding@Home: Welcome to Folding@Home
[18:30:29] Loaded queue successfully.
[18:30:29] Gpu type=3 species=0.
[18:30:30] Project: 6800 (Run 4941, Clone 2, Gen 8)
[18:30:30] + Attempting to send results [December 15 18:30:30 UTC]
[18:30:30] Gpu type=3 species=0.
[18:31:07] - Couldn't send HTTP request to server
[18:31:07] + Could not connect to Work Server (results)
[18:31:07] (171.64.65.64:8080)
[18:31:07] + Retrying using alternative port
[18:32:09] - Couldn't send HTTP request to server
[18:32:09] + Could not connect to Work Server (results)
[18:32:09] (171.64.65.64:80)
[18:32:09] - Error: Could not transmit unit 07 (completed December 13) to work server.
[18:32:09] + Attempting to send results [December 15 18:32:09 UTC]
[18:32:09] Gpu type=3 species=0.
[18:33:10] - Couldn't send HTTP request to server
[18:33:10] + Could not connect to Work Server (results)
[18:33:10] (171.67.108.26:8080)
[18:33:10] + Retrying using alternative port
[18:33:12] - Couldn't send HTTP request to server
[18:33:12] + Could not connect to Work Server (results)
[18:33:12] (171.67.108.26:80)
[18:33:12] Could not transmit unit 07 to Collection server; keeping in queue.
[18:33:12] + Closed connections
[18:33:12]
[18:33:12] + Processing work unit
[18:33:12] Core required: FahCore_15.exe
[18:33:12] Core found.
[18:33:12] Working on queue slot 04 [December 15 18:33:12 UTC]
[18:33:12] + Working ...
[18:33:12]
[18:33:12] *------------------------------*
[18:33:12] Folding@Home GPU Core
[18:33:12] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[18:33:12]
[18:33:12] Build host: SimbiosNvdWin7
[18:33:12] Board Type: NVIDIA/CUDA
[18:33:12] Core : x=15
[18:33:12] Window's signal control handler registered.
[18:33:12] Preparing to commence simulation
[18:33:12] - Looking at optimizations...
[18:33:12] DeleteFrameFiles: successfully deleted file=work/wudata_04.ckp
[18:33:12] - Created dyn
[18:33:12] - Files status OK
[18:33:12] sizeof(CORE_PACKET_HDR) = 512 file=<>
[18:33:12] - Expanded 43271 -> 169787 (decompressed 392.3 percent)
[18:33:12] Called DecompressByteArray: compressed_data_size=43271 data_size=169787, decompressed_data_size=169787 diff=0
[18:33:12] - Digital signature verified
[18:33:12]
[18:33:12] Project: 6800 (Run 32, Clone 2, Gen 16)
[18:33:12]
[18:33:12] Assembly optimizations on if available.
[18:33:12] Entering M.D.
[18:33:14] Tpr hash work/wudata_04.tpr: 3580990789 1460456651 1979258451 2814328318 3043006814
[18:33:14] Working on PEPTIDE (1-42)
[18:33:14] Client config found, loading data.
[18:33:14] Starting GUI Server
[18:34:38] Completed 500000 out of 50000000 steps (1%).