Page 1 of 1

171.67.108.11

Posted: Sun Aug 08, 2010 3:39 pm
by coo-coo
Server status shows "accepting" but haven't been able to get new GPU WU for over 7 hours.

Re: 171.67.108.11

Posted: Sun Aug 08, 2010 9:17 pm
by 7im
As always, we'd like to see your fahlog.txt contents. What message does your fahlog.txt say about not getting work? Any error messages? Codes?

Re: 171.67.108.11

Posted: Mon Aug 16, 2010 6:08 pm
by ElectricVehicle
I also had an issue with 171.67.108.11
[14:44:44] Connecting to http://171.67.108.11:8080/
[14:44:48] Posted data.
[14:44:48] Initial: 0000; - Receiving payload (expected size: 47078)

Then it just hung apparently waiting to receive the payload until this morning. Stopping and restarting the client got me going again, using the same 171.67.108.11 server, no less...

Code: Select all

...
[14:41:24] Completed 98%
[14:42:35] Completed 99%
[14:43:47] Completed 100%
[14:43:47] Successful run
[14:43:47] DynamicWrapper: Finished Work Unit: sleep=10000
[14:43:57] Reserved 75876 bytes for xtc file; Cosm status=0
[14:43:57] Allocated 75876 bytes for xtc file
[14:43:57] - Reading up to 75876 from "work/wudata_04.xtc": Read 75876
[14:43:57] Read 75876 bytes from xtc file; available packet space=786354588
[14:43:57] xtc file hash check passed.
[14:43:57] Reserved 15168 15168 786354588 bytes for arc file=<work/wudata_04.trr> Cosm status=0
[14:43:57] Allocated 15168 bytes for arc file
[14:43:57] - Reading up to 15168 from "work/wudata_04.trr": Read 15168
[14:43:57] Read 15168 bytes from arc file; available packet space=786339420
[14:43:57] trr file hash check passed.
[14:43:57] Allocated 560 bytes for edr file
[14:43:57] Read bedfile
[14:43:57] edr file hash check passed.
[14:43:57] Allocated 10613 bytes for logfile
[14:43:57] Read logfile
[14:43:57] GuardedRun: success in DynamicWrapper
[14:43:57] GuardedRun: done
[14:43:57] Run: GuardedRun completed.
[14:44:02] + Opened results file
[14:44:02] - Writing 102729 bytes of core data to disk...
[14:44:02] Done: 102217 -> 95431 (compressed to 93.3 percent)
[14:44:02]   ... Done.
[14:44:02] DeleteFrameFiles: successfully deleted file=work/wudata_04.ckp
[14:44:02] Shutting down core 
[14:44:02] 
[14:44:02] Folding@home Core Shutdown: FINISHED_UNIT
[14:44:05] CoreStatus = 64 (100)
[14:44:05] Unit 4 finished with 97 percent of time to deadline remaining.
[14:44:05] Updated performance fraction: 0.978315
[14:44:05] Sending work to server
[14:44:05] Project: 5765 (Run 6, Clone 120, Gen 1160)
[14:44:05] - Read packet limit of 540015616... Set to 524286976.


[14:44:05] + Attempting to send results [August 12 14:44:05 UTC]
[14:44:05] - Reading file work/wuresults_04.dat from core
[14:44:05]   (Read 95943 bytes from disk)
[14:44:05] Connecting to http://171.67.108.11:8080/
[14:44:26] - Couldn't send HTTP request to server
[14:44:26] + Could not connect to Work Server (results)
[14:44:26]     (171.67.108.11:8080)
[14:44:26] + Retrying using alternative port
[14:44:26] Connecting to http://171.67.108.11:80/
[14:44:29] Posted data.
[14:44:33] Initial: 0000; + Results successfully sent
[14:44:33] Thank you for your contribution to Folding@Home.
[14:44:33] + Number of Units Completed: 6007

[14:44:37] Trying to send all finished work units
[14:44:37] + No unsent completed units remaining.
[14:44:37] - Preparing to get new work unit...
[14:44:37] + Attempting to get work packet
[14:44:37] - Will indicate memory of 3070 MB
[14:44:37] - Connecting to assignment server
[14:44:37] Connecting to http://assign-GPU.stanford.edu:8080/
[14:44:44] Posted data.
[14:44:44] Initial: 43AB; - Successful: assigned to (171.67.108.11).
[14:44:44] + News From Folding@Home: Welcome to Folding@Home
[14:44:44] Loaded queue successfully.
[14:44:44] Connecting to http://171.67.108.11:8080/
[14:44:48] Posted data.
[14:44:48] Initial: 0000; - Receiving payload (expected size: 47078)
[17:42:01] - Autosending finished units... [August 12 17:42:01 UTC]
[17:42:01] Trying to send all finished work units
[17:42:01] + No unsent completed units remaining.
[17:42:01] - Autosend completed
[23:42:01] - Autosending finished units... [August 12 23:42:01 UTC]
[23:42:01] Trying to send all finished work units
[23:42:01] + No unsent completed units remaining.
[23:42:01] - Autosend completed
[05:42:01] - Autosending finished units... [August 13 05:42:01 UTC]
[05:42:01] Trying to send all finished work units
[05:42:01] + No unsent completed units remaining.
[05:42:01] - Autosend completed
... remains hung and doing the periodic autosends until just now when I stopped the client ...
Here's the client getting started again. The first attempt failed, but the second got me a WU and I'm folding again.
[17:40:43] Connecting to http://171.67.108.11:8080/
[17:40:44] Posted data.
[17:40:44] Initial: 0000; + Could not connect to Work Server
[17:40:44] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.

Code: Select all

[17:40:43] Loaded queue successfully.
[17:40:43] Initialization complete
[17:40:43] - Preparing to get new work unit...
[17:40:43] - Autosending finished units... [August 16 17:40:43 UTC]
[17:40:43] + Attempting to get work packet
[17:40:43] Trying to send all finished work units
[17:40:43] + No unsent completed units remaining.
[17:40:43] - Autosend completed
[17:40:43] - Will indicate memory of 3070 MB
[17:40:43] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[17:40:43] - Connecting to assignment server
[17:40:43] Connecting to http://assign-GPU.stanford.edu:8080/
[17:40:43] Posted data.
[17:40:43] Initial: 43AB; - Successful: assigned to (171.67.108.11).
[17:40:43] + News From Folding@Home: Welcome to Folding@Home
[17:40:43] Loaded queue successfully.
[17:40:43] Connecting to http://171.67.108.11:8080/
[17:40:44] Posted data.
[17:40:44] Initial: 0000; + Could not connect to Work Server
[17:40:44] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[17:40:51] + Attempting to get work packet
[17:40:51] - Will indicate memory of 3070 MB
[17:40:51] - Connecting to assignment server
[17:40:51] Connecting to http://assign-GPU.stanford.edu:8080/
[17:40:51] Posted data.
[17:40:51] Initial: 43AB; - Successful: assigned to (171.67.108.11).
[17:40:51] + News From Folding@Home: Welcome to Folding@Home
[17:40:51] Loaded queue successfully.
[17:40:51] Connecting to http://171.67.108.11:8080/
[17:40:51] Posted data.
[17:40:51] Initial: 0000; - Receiving payload (expected size: 47234)
[17:40:51] Conversation time very short, giving reduced weight in bandwidth avg
[17:40:51] - Downloaded at ~92 kB/s
[17:40:51] - Averaged speed for that direction ~93 kB/s
[17:40:51] + Received work.
[17:40:51] + Closed connections
[17:40:51] 
[17:40:51] + Processing work unit
[17:40:51] Core required: FahCore_11.exe
[17:40:51] Core found.
[17:40:51] Working on queue slot 05 [August 16 17:40:51 UTC]
[17:40:51] + Working ...
...

Re: 171.67.108.11

Posted: Tue Aug 24, 2010 12:59 am
by Tobit
Unable to upload work to this server. Getting new work from other servers however.

Browser says: Firefox can't establish a connection to the server at 171.67.108.11:8080.

Code: Select all

[00:27:22] - Autosending finished units... [August 24 00:27:22 UTC]
[00:27:22] Trying to send all finished work units
[00:27:22] Project: 5769 (Run 11, Clone 275, Gen 176)
[00:27:22] - Read packet limit of 540015616... Set to 524286976.

[00:27:22] + Attempting to send results [August 24 00:27:22 UTC]
[00:27:22] - Reading file work/wuresults_08.dat from core
[00:27:22]   (Read 99692 bytes from disk)
[00:27:22] Connecting to http://171.67.108.11:8080/
[00:27:24] - Couldn't send HTTP request to server
[00:27:24] + Could not connect to Work Server (results)
[00:27:24]     (171.67.108.11:8080)
[00:27:24] + Retrying using alternative port
[00:27:24] Connecting to http://171.67.108.11:80/
[00:27:25] - Couldn't send HTTP request to server
[00:27:25] + Could not connect to Work Server (results)
[00:27:25]     (171.67.108.11:80)
[00:27:25] - Error: Could not transmit unit 08 (completed August 24) to work server.
[00:27:25] - 4 failed uploads of this unit.

Re: 171.67.108.11

Posted: Tue Aug 24, 2010 1:07 am
by Tobit
According to the server status page, it is now showing Reject status.

Re: 171.67.108.11

Posted: Tue Aug 24, 2010 1:49 am
by Tobit
Server appears to be back up for me, work finally submitted.