Page 1 of 1

171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Thu Jul 29, 2010 4:31 am
by BrokenWolf
I am unable to upload some WU's to these 2 systems. One gets a 504 error and the other a 502. I do not get the OK when trying to access these systems via a web browser.

It would appear that 171.64.65.54 is down per the server status page.

Might we be able to get someone to give 'em a kick or 2?

Thank you,

BrokenWolf

Re: 171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Thu Jul 29, 2010 4:42 am
by lanbrown
Same here and can't get anymore either.

Code: Select all

[02:08:24] Completed 415000 out of 500000 steps  (83%)
[02:15:03] Completed 420000 out of 500000 steps  (84%)
[02:21:43] Completed 425000 out of 500000 steps  (85%)
[02:28:23] Completed 430000 out of 500000 steps  (86%)
[02:35:03] Completed 435000 out of 500000 steps  (87%)
[02:41:43] Completed 440000 out of 500000 steps  (88%)
[02:48:24] Completed 445000 out of 500000 steps  (89%)
[02:55:04] Completed 450000 out of 500000 steps  (90%)
[03:01:44] Completed 455000 out of 500000 steps  (91%)
[03:08:26] Completed 460000 out of 500000 steps  (92%)
[03:15:07] Completed 465000 out of 500000 steps  (93%)
[03:21:48] Completed 470000 out of 500000 steps  (94%)
[03:28:28] Completed 475000 out of 500000 steps  (95%)
[03:35:09] Completed 480000 out of 500000 steps  (96%)
[03:41:50] Completed 485000 out of 500000 steps  (97%)
[03:48:31] Completed 490000 out of 500000 steps  (98%)
[03:55:12] Completed 495000 out of 500000 steps  (99%)
[04:01:54] Completed 500000 out of 500000 steps  (100%)
[04:01:54] DynamicWrapper: Finished Work Unit: sleep=10000
[04:02:04]
[04:02:04] Finished Work Unit:
[04:02:04] - Reading up to 3697488 from "work/wudata_04.trr": Read 3697488
[04:02:04] trr file hash check passed.
[04:02:04] edr file hash check passed.
[04:02:04] logfile size: 57762
[04:02:04] Leaving Run
[04:02:08] - Writing 3790802 bytes of core data to disk...
[04:02:08]   ... Done.
[04:02:08] - Shutting down core
[04:02:08]
[04:02:08] Folding@home Core Shutdown: FINISHED_UNIT
[04:02:09] CoreStatus = 64 (100)
[04:02:09] Unit 4 finished with 92 percent of time to deadline remaining.
[04:02:09] Updated performance fraction: 0.902025
[04:02:09] Sending work to server
[04:02:09] Project: 6071 (Run 0, Clone 19, Gen 91)


[04:02:09] + Attempting to send results [July 29 04:02:09 UTC]
[04:02:09] - Reading file work/wuresults_04.dat from core
[04:02:09]   (Read 3790802 bytes from disk)
[04:02:09] Connecting to http://171.64.65.54:8080/
[04:05:18] - Couldn't send HTTP request to server
[04:05:18] + Could not connect to Work Server (results)
[04:05:18]     (171.64.65.54:8080)
[04:05:18] + Retrying using alternative port
[04:05:18] Connecting to http://171.64.65.54:80/
[04:08:27] - Couldn't send HTTP request to server
[04:08:27] + Could not connect to Work Server (results)
[04:08:27]     (171.64.65.54:80)
[04:08:27] - Error: Could not transmit unit 04 (completed July 29) to work server.
[04:08:27] - 1 failed uploads of this unit.
[04:08:27]   Keeping unit 04 in queue.
[04:08:27] Trying to send all finished work units
[04:08:27] Project: 6071 (Run 0, Clone 19, Gen 91)


[04:08:27] + Attempting to send results [July 29 04:08:27 UTC]
[04:08:27] - Reading file work/wuresults_04.dat from core
[04:08:27]   (Read 3790802 bytes from disk)
[04:08:27] Connecting to http://171.64.65.54:8080/
[04:11:36] - Couldn't send HTTP request to server
[04:11:36] + Could not connect to Work Server (results)
[04:11:36]     (171.64.65.54:8080)
[04:11:36] + Retrying using alternative port
[04:11:36] Connecting to http://171.64.65.54:80/
[04:14:45] - Couldn't send HTTP request to server
[04:14:45] + Could not connect to Work Server (results)
[04:14:45]     (171.64.65.54:80)
[04:14:45] - Error: Could not transmit unit 04 (completed July 29) to work server.
[04:14:45] - 2 failed uploads of this unit.


[04:14:45] + Attempting to send results [July 29 04:14:45 UTC]
[04:14:45] - Reading file work/wuresults_04.dat from core
[04:14:45]   (Read 3790802 bytes from disk)
[04:14:45] Connecting to http://171.67.108.25:8080/
[04:14:46] Posted data.
[04:14:46] Initial: 0000; + Could not connect to Work Server (results)
[04:14:46]     (171.67.108.25:8080)
[04:14:46] + Retrying using alternative port
[04:14:46] Connecting to http://171.67.108.25:80/
[04:14:47] Posted data.
[04:14:47] Initial: 0000; + Could not connect to Work Server (results)
[04:14:47]     (171.67.108.25:80)
[04:14:47]   Could not transmit unit 04 to Collection server; keeping in queue.
[04:14:47] + Sent 0 of 1 completed units to the server
[04:14:47] - Preparing to get new work unit...
[04:14:47] Cleaning up work directory
[04:14:47] + Attempting to get work packet
[04:14:47] Passkey found
[04:14:47] - Will indicate memory of 7471 MB
[04:14:47] - Connecting to assignment server
[04:14:47] Connecting to http://assign.stanford.edu:8080/
[04:14:48] Posted data.
[04:14:48] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[04:14:48] + Couldn't get work instructions.
[04:14:48] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[04:14:57] + Attempting to get work packet
[04:14:57] Passkey found
[04:14:57] - Will indicate memory of 7471 MB
[04:14:57] - Connecting to assignment server
[04:14:57] Connecting to http://assign.stanford.edu:8080/
[04:14:57] Posted data.
[04:14:57] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[04:14:57] + Couldn't get work instructions.
[04:14:57] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[04:15:18] + Attempting to get work packet
[04:15:18] Passkey found
[04:15:18] - Will indicate memory of 7471 MB
[04:15:18] - Connecting to assignment server
[04:15:18] Connecting to http://assign.stanford.edu:8080/
[04:15:18] Posted data.
[04:15:18] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[04:15:18] + Couldn't get work instructions.
[04:15:18] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[04:15:45] + Attempting to get work packet
[04:15:45] Passkey found
[04:15:45] - Will indicate memory of 7471 MB
[04:15:45] - Connecting to assignment server
[04:15:45] Connecting to http://assign.stanford.edu:8080/
[04:15:45] Posted data.
[04:15:45] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[04:15:45] + Couldn't get work instructions.
[04:15:45] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[04:16:25] + Attempting to get work packet
[04:16:25] Passkey found
[04:16:25] - Will indicate memory of 7471 MB
[04:16:25] - Connecting to assignment server
[04:16:25] Connecting to http://assign.stanford.edu:8080/
[04:16:25] Posted data.
[04:16:25] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[04:16:25] + Couldn't get work instructions.
[04:16:25] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[04:17:57] + Attempting to get work packet
[04:17:57] Passkey found
[04:17:57] - Will indicate memory of 7471 MB
[04:17:57] - Connecting to assignment server
[04:17:57] Connecting to http://assign.stanford.edu:8080/
[04:17:58] Posted data.
[04:17:58] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[04:17:58] + Couldn't get work instructions.
[04:17:58] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.

Re: 171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Thu Jul 29, 2010 6:30 pm
by 7im
BrokenWolf wrote:I am unable to upload some WU's to these 2 systems. One gets a 504 error and the other a 502. I do not get the OK when trying to access these systems via a web browser.

It would appear that 171.64.65.54 is down per the server status page.

Might we be able to get someone to give 'em a kick or 2?

Thank you,

BrokenWolf
See the Stanford network issues announcement here: http://foldingforum.org/viewtopic.php?f=24&t=15450

Also said it should be fixed. Post again if it's not.

Re: 171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Thu Jul 29, 2010 10:14 pm
by BrokenWolf
7im wrote:
BrokenWolf wrote:I am unable to upload some WU's to these 2 systems. One gets a 504 error and the other a 502. I do not get the OK when trying to access these systems via a web browser.

It would appear that 171.64.65.54 is down per the server status page.

Might we be able to get someone to give 'em a kick or 2?

Thank you,

BrokenWolf
See the Stanford network issues announcement here: http://foldingforum.org/viewtopic.php?f=24&t=15450

Also said it should be fixed. Post again if it's not.
7im,

If you would please look at the times you would see that my post was @ 9:31pm. The posts you are referring to came out @ 10:21pm and 10:50pm. I saw those after they posted them up.

BW

Re: 171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Sat Jul 31, 2010 2:55 pm
by heikosch
Problems again:

Code: Select all

Couldn't send HTTP request to server
[11:49:39]   (Got status 503)
[11:49:39] + Could not connect to Work Server (results)
[11:49:39]     (171.67.108.25:80)
[11:49:39]   Could not transmit unit 04 to Collection server; keeping in queue.
[11:49:39] + Sent 0 of 1 completed units to the server
Heiko

Re: 171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Sat Jul 31, 2010 6:40 pm
by heikosch
Finally the client decided to use the other server and the WU was sucessfully uploaded to 171.64.65.54:80. :-)

Heiko

Re: 171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Sun Aug 01, 2010 3:46 am
by Mr.Nosmo
I have the same problem:
[02:15:22] Completed 2000000 out of 2000000 steps (100%)
[02:15:22] DynamicWrapper: Finished Work Unit: sleep=10000
[02:15:32]
[02:15:32] Finished Work Unit:
[02:15:32] - Reading up to 687408 from "work/wudata_01.trr": Read 687408
[02:15:32] trr file hash check passed.
[02:15:32] - Reading up to 42624264 from "work/wudata_01.xtc": Read 42624264
[02:15:32] xtc file hash check passed.
[02:15:32] edr file hash check passed.
[02:15:32] logfile size: 278923
[02:15:32] Leaving Run
[02:15:34] - Writing 43592931 bytes of core data to disk...
[02:15:35] ... Done.
[02:15:36] - Shutting down core
[02:15:36]
[02:15:36] Folding@home Core Shutdown: FINISHED_UNIT
[02:15:38] CoreStatus = 64 (100)
[02:15:38] Unit 1 finished with 94 percent of time to deadline remaining.
[02:15:38] Updated performance fraction: 0.866353
[02:15:38] Sending work to server
[02:15:38] Project: 6701 (Run 74, Clone 26, Gen 23)


[02:15:38] + Attempting to send results [August 1 02:15:38 UTC]
[02:15:38] - Reading file work/wuresults_01.dat from core
[02:15:38] (Read 43592931 bytes from disk)
[02:15:38] Connecting to http://171.64.65.56:8080/
[02:15:38] - Couldn't send HTTP request to server
[02:15:38] (Got status 503)
[02:15:38] + Could not connect to Work Server (results)
[02:15:38] (171.64.65.56:8080)
[02:15:38] + Retrying using alternative port
[02:15:38] Connecting to http://171.64.65.56:80/
[02:15:39] - Couldn't send HTTP request to server
[02:15:39] (Got status 503)
[02:15:39] + Could not connect to Work Server (results)
[02:15:39] (171.64.65.56:80)
[02:15:39] - Error: Could not transmit unit 01 (completed August 1) to work server.
[02:15:39] - 1 failed uploads of this unit.
[02:15:39] Keeping unit 01 in queue.
[02:15:39] Trying to send all finished work units
[02:15:39] Project: 6701 (Run 74, Clone 26, Gen 23)


[02:15:39] + Attempting to send results [August 1 02:15:39 UTC]
[02:15:39] - Reading file work/wuresults_01.dat from core
[02:15:39] (Read 43592931 bytes from disk)
[02:15:39] Connecting to http://171.64.65.56:8080/
[02:15:39] - Couldn't send HTTP request to server
[02:15:39] (Got status 503)
[02:15:39] + Could not connect to Work Server (results)
[02:15:39] (171.64.65.56:8080)
[02:15:39] + Retrying using alternative port
[02:15:39] Connecting to http://171.64.65.56:80/
[02:15:40] - Couldn't send HTTP request to server
[02:15:40] (Got status 503)
[02:15:40] + Could not connect to Work Server (results)
[02:15:40] (171.64.65.56:80)
[02:15:40] - Error: Could not transmit unit 01 (completed August 1) to work server.
[02:15:40] - 2 failed uploads of this unit.


[02:15:40] + Attempting to send results [August 1 02:15:40 UTC]
[02:15:40] - Reading file work/wuresults_01.dat from core
[02:15:40] (Read 43592931 bytes from disk)
[02:15:40] Connecting to http://171.67.108.25:8080/
[02:15:40] - Couldn't send HTTP request to server
[02:15:40] (Got status 503)
[02:15:40] + Could not connect to Work Server (results)
[02:15:40] (171.67.108.25:8080)
[02:15:40] + Retrying using alternative port
[02:15:40] Connecting to http://171.67.108.25:80/
[02:15:41] - Couldn't send HTTP request to server
[02:15:41] (Got status 503)
[02:15:41] + Could not connect to Work Server (results)
[02:15:41] (171.67.108.25:80)
[02:15:41] Could not transmit unit 01 to Collection server; keeping in queue.
[02:15:41] + Sent 0 of 1 completed units to the server
[02:15:41] - Preparing to get new work unit...
[02:15:41] Cleaning up work directory
[02:15:41] + Attempting to get work packet
[02:15:41] Passkey found
[02:15:41] - Will indicate memory of 6135 MB
[02:15:41] - Connecting to assignment server
[02:15:41] Connecting to http://assign.stanford.edu:8080/
[02:15:43] Posted data.
[02:15:43] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[02:15:43] + News From Folding@Home: Welcome to Folding@Home
[02:15:43] Loaded queue successfully.
[02:15:43] Sent data
[02:15:43] Connecting to http://171.67.108.22:8080/
[02:15:52] Posted data.
[02:15:52] Initial: 0000; - Receiving payload (expected size: 26648651)
[02:16:36] - Downloaded at ~591 kB/s
[02:16:36] - Averaged speed for that direction ~400 kB/s
[02:16:36] + Received work.
[02:16:36] Trying to send all finished work units
[02:16:36] Project: 6701 (Run 74, Clone 26, Gen 23)


[02:16:36] + Attempting to send results [August 1 02:16:36 UTC]
[02:16:36] - Reading file work/wuresults_01.dat from core
[02:16:36] (Read 43592931 bytes from disk)
[02:16:36] Connecting to http://171.64.65.56:8080/
[02:16:37] - Couldn't send HTTP request to server
[02:16:37] (Got status 503)
[02:16:37] + Could not connect to Work Server (results)
[02:16:37] (171.64.65.56:8080)
[02:16:37] + Retrying using alternative port
[02:16:37] Connecting to http://171.64.65.56:80/
[02:16:37] - Couldn't send HTTP request to server
[02:16:37] (Got status 503)
[02:16:37] + Could not connect to Work Server (results)
[02:16:37] (171.64.65.56:80)
[02:16:37] - Error: Could not transmit unit 01 (completed August 1) to work server.
[02:16:37] - 3 failed uploads of this unit.


[02:16:37] + Attempting to send results [August 1 02:16:37 UTC]
[02:16:37] - Reading file work/wuresults_01.dat from core
[02:16:37] (Read 43592931 bytes from disk)
[02:16:37] Connecting to http://171.67.108.25:8080/
[02:16:38] - Couldn't send HTTP request to server
[02:16:38] (Got status 503)
[02:16:38] + Could not connect to Work Server (results)
[02:16:38] (171.67.108.25:8080)
[02:16:38] + Retrying using alternative port
[02:16:38] Connecting to http://171.67.108.25:80/
[02:16:38] - Couldn't send HTTP request to server
[02:16:38] (Got status 503)
[02:16:38] + Could not connect to Work Server (results)
[02:16:38] (171.67.108.25:80)
[02:16:38] Could not transmit unit 01 to Collection server; keeping in queue.
[02:16:38] + Sent 0 of 1 completed units to the server
[02:16:38] + Closed connections
[02:16:38]
[02:16:38] + Processing work unit
[02:16:38] Core required: FahCore_a3.exe
[02:16:38] Core found.
[02:16:38] Working on queue slot 02 [August 1 02:16:38 UTC]
[02:16:38] + Working ...
[02:16:38] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 12 -nocpulock -checkpoint 15 -verbose -lifeline 5272 -version 630'

[02:16:38]
[02:16:38] *------------------------------*
[02:16:38] Folding@Home Gromacs SMP Core
[02:16:38] Version 2.22 (Mar 12, 2010)
[02:16:38]
[02:16:38] Preparing to commence simulation
[02:16:38] - Looking at optimizations...
[02:16:38] - Created dyn
[02:16:38] - Files status OK
[02:16:43] - Expanded 26648139 -> 33000273 (decompressed 123.8 percent)
[02:16:43] Called DecompressByteArray: compressed_data_size=26648139 data_size=33000273, decompressed_data_size=33000273 diff=0
[02:16:43] - Digital signature verified
[02:16:43]
[02:16:43] Project: 2685 (Run 3, Clone 14, Gen 9)
[02:16:43]
[02:16:43] Assembly optimizations on if available.
[02:16:43] Entering M.D.
[02:16:52] Completed 0 out of 250000 steps (0%)
[02:41:23] Completed 2500 out of 250000 steps (1%)

Re: 171.64.65.54 and 171.67.108.25 on ports 8080 and 80

Posted: Sun Aug 01, 2010 4:18 am
by k1wi
Have been getting the same problem on and off today, restarting the client assigned me to a different server and got me a work unit but that work unit is complete, it's stuck on 171.67.108.22 again and I'm offsite :(

k1wi