Page 1 of 2
Project: 6013 Run 0, Clone 171, Gen 60
Posted: Fri Jun 11, 2010 1:11 pm
by capreppy
I've received this WU several times and always fails @ 0%. The A3 core crashes and says notify PG.
I received it at least half a dozen times over the last week. I've tried deleting the Queue and Restarting, but I keep getting it back. Sometimes it'll pick up a different WU, but eventually it downloads this one again.
Re: Project: 6013 Run 0, Clone 171, Gen 60
Posted: Fri Jun 11, 2010 6:46 pm
by shunter
Can this unit be reported as faulty and removed from the list please. I too have caught this one and although it was running it takes 1 hour 15 mins per 1% and I have no confidence it will complete so have deleted it from my queue.
Many thanks
Shunter
Re: Project: 6013 Run 0, Clone 171, Gen 60
Posted: Fri Jun 11, 2010 7:06 pm
by bruce
We need more information. Please post FAHlog showing what kind of problems you're having. At this point there are no reports of problems with this WU other than yours.
Re: Project: 6013 Run 0, Clone 171, Gen 60
Posted: Sat Jun 12, 2010 1:21 am
by capreppy
After deleting the Queue, I got it again at least once today.
The machine it is currently running on has been rock solid stable for months on every other A3 WU as well as A2 Big Adv.
Code: Select all
[19:06:33] + Processing work unit
[19:06:33] Core required: FahCore_a3.exe
[19:06:33] Core found.
[19:06:33] Working on queue slot 02 [June 11 19:06:33 UTC]
[19:06:33] + Working ...
[19:06:33]
[19:06:33] *------------------------------*
[19:06:33] Folding@Home Gromacs SMP Core
[19:06:33] Version 2.19 (Mar 12, 2010)
[19:06:33]
[19:06:33] Preparing to commence simulation
[19:06:33] - Assembly optimizations manually forced on.
[19:06:33] - Not checking prior termination.
[19:06:34] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[19:06:34] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[19:06:34] - Digital signature verified
[19:06:34]
[19:06:34] Project: 6013 (Run 0, Clone 171, Gen 60)
[19:06:34]
[19:06:34] Assembly optimizations on if available.
[19:06:34] Entering M.D.
[19:09:03] Completed 0 out of 250000 steps (0%)
[19:25:37] CoreStatus = 3 (3)
[19:25:37] Client-core communications error: ERROR 0x3
[19:25:37] Deleting current work unit & continuing...
[19:25:49] - Preparing to get new work unit...
[19:25:49] Cleaning up work directory
[19:25:49] + Attempting to get work packet
[19:25:49] Passkey found
[19:25:49] - Connecting to assignment server
[19:25:50] - Successful: assigned to (171.64.65.54).
[19:25:50] + News From Folding@Home: Welcome to Folding@Home
[19:25:50] Loaded queue successfully.
[19:26:24] + Closed connections
[19:26:29]
Re: Project: 6013 Run 0, Clone 171, Gen 60
Posted: Sat Jun 12, 2010 7:48 pm
by shunter
With the server issues today and this unit cropping up again in my queue I've had a disappointing day. 75 minutes for 1% and 380 points in total is not a worthwhile effort especially as, if past experience is anything to go by, it will most likely fail before it completes. Please remove unit from the list.
Thanks
Shunter
Logfile below. At this point I updated Windows for latest updates and re-booted pc and set unit off again hoping for better performance but as you can see it still takes 73 minutes to complete 1%. - historically I would expect 7 minutes per 1%.
Code: Select all
--- Opening Log file [June 11 06:17:29 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Folding SMP
Executable: C:\Folding SMP\[email protected]
Arguments: -smp -verbosity 9 -forceasm -advmethods
[06:17:29] - Ask before connecting: No
[06:17:29] - User name: shunter (Team 46590)
[06:17:29] - User ID: 10807C3249903C1D
[06:17:29] - Machine ID: 1
[06:17:29]
[06:17:29] Loaded queue successfully.
[06:17:29]
[06:17:29] - Autosending finished units... [June 11 06:17:29 UTC]
[06:17:29] + Processing work unit
[06:17:29] Trying to send all finished work units
[06:17:29] Core required: FahCore_a3.exe
[06:17:29] + No unsent completed units remaining.
[06:17:29] - Autosend completed
[06:17:29] Core found.
[06:17:29] Working on queue slot 04 [June 11 06:17:29 UTC]
[06:17:29] + Working ...
[06:17:29] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 04 -np 4 -checkpoint 15 -forceasm -verbose -lifeline 244 -version 629'
[06:17:29]
[06:17:29] *------------------------------*
[06:17:29] Folding@Home Gromacs SMP Core
[06:17:29] Version 2.19 (Mar 12, 2010)
[06:17:29]
[06:17:29] Preparing to commence simulation
[06:17:29] - Ensuring status. Please wait.
[06:17:39] - Assembly optimizations manually forced on.
[06:17:39] - Not checking prior termination.
[06:17:40] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[06:17:40] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[06:17:40] - Digital signature verified
[06:17:40]
[06:17:40] Project: 6013 (Run 0, Clone 171, Gen 60)
[06:17:40]
[06:17:40] Assembly optimizations on if available.
[06:17:40] Entering M.D.
[06:17:46] Using Gromacs checkpoints
[06:17:48] Resuming from checkpoint
[06:17:48] Verified work/wudata_04.log
[06:17:48] Verified work/wudata_04.trr
[06:17:48] Verified work/wudata_04.xtc
[06:17:48] Verified work/wudata_04.edr
[06:18:05] Completed 34759 out of 250000 steps (13%)
[06:25:08] Completed 35000 out of 250000 steps (14%)
[07:38:30] Completed 37500 out of 250000 steps (15%)
[08:51:52] Completed 40000 out of 250000 steps (16%)
[10:05:14] Completed 42500 out of 250000 steps (17%)
[11:18:35] Completed 45000 out of 250000 steps (18%)
[12:17:29] - Autosending finished units... [June 11 12:17:29 UTC]
[12:17:29] Trying to send all finished work units
[12:17:29] + No unsent completed units remaining.
[12:17:29] - Autosend completed
[12:31:57] Completed 47500 out of 250000 steps (19%)
[13:45:19] Completed 50000 out of 250000 steps (20%)
[14:58:41] Completed 52500 out of 250000 steps (21%)
[14:59:16] Killing all core threads
[14:59:16] Killing 2 cores
[14:59:16] Killing core 0
[14:59:16] Killing core 1
Folding@Home Client Shutdown at user request.
[14:59:16] ***** Got a SIGTERM signal (2)
[14:59:16] Killing all core threads
[14:59:16] Killing 2 cores
[14:59:16] Killing core 0
[14:59:16] Killing core 1
Folding@Home Client Shutdown.
Re: Project: 6013 Run 0, Clone 171, Gen 60
Posted: Tue Jun 15, 2010 9:51 pm
by sirnelsongap
I also have trouble with this one in as much as it runs so slow that it wont finish in the deadline. This pc (2.4G quad core) normally completes 1% in <10 mins, but is taking >75 per %.
Re: Project: 6013 Run 0, Clone 171, Gen 60
Posted: Wed Jun 16, 2010 8:06 am
by bruce
sirnelsongap wrote:I also have trouble with this one in as much as it runs so slow that it wont finish in the deadline. This pc (2.4G quad core) normally completes 1% in <10 mins, but is taking >75 per %.
Comparing one project with another project is always a risky proposition. All of us like to decide that one thing is "normal" and something else is not but I've seen repeatedly that once something starts appearing to be normal things change.
I'm not saying that your statements are untrue . . . but it always has to be made in comparison to something else.
Maybe your suggesting that the deadline needs to be larger in comparison to the deadline for the :"normal" deadline. In fact, "normal" deadlines have started changing. Maybe not always, but the range has increased.
Maybe you're suggesting the points are less than you expect. (Funny thing: Nobody ever complains when the points are more than they expect. They just call the new value "normal" and complain tha next time they get what they had been getting before.)
Performance varies based on hardware, too. In the past, the Pande Group has not done a good job of hardware detection and assignment customization. They've announced that they're going to do better, but things lkie that take a lot longer than anybody is willing to predict.
Re: Project: 6013 Run 0, Clone 171, Gen 60
Posted: Wed Jun 16, 2010 12:26 pm
by sirnelsongap
Maybe your suggesting that the deadline needs to be larger in comparison to the deadline for the :"normal" deadline. In fact, "normal" deadlines have started changing. Maybe not always, but the range has increased.
Maybe you're suggesting the points are less than you expect. (Funny thing: Nobody ever complains when the points are more than they expect. They just call the new value "normal" and complain tha next time they get what they had been getting before.)
I wasn't trying to suggest anything in particular. I was just responding to the earlier post that said that no one else had reported any problems on this WU.
However, if a reasonably powerful, dedicated folding platform can't complete a WU in the allotted time it does suggest that something is wrong, whether it's the deadline, or the allocation strategy or the WU is for others to determine.
Project 6013 (Run 0, Clone 171, Gen 60)
Posted: Thu Jun 17, 2010 1:25 pm
by Bob8421
This work unit was received this morning and is having the exact same problem as the one in thread "Project 6013 (Run 0, Clone 95, Gen 85)" -- each percentage of completion is taking 75 minutes instead of the usual 7.5 minutes. It is impossible for it to finish within the 3-day deadline time limit. Others have mentioned receiving a number of 6013 work units that cannot be finished in time.
I have seen a mod mention that he could flag a particular work unit as defective. Would somebody PLEASE flag the entire 6013 PROJECT as defective until PG can determine just why some work units take 10 times longer to run than others and then remove those defective work units from the system?
Exactly zero science is being accomplished when machines spend 3 days performing calculations that will then be thrown away because they can't be completed in time.
Re: Project 6013 (Run 0, Clone 171, Gen 60)
Posted: Sat Jun 19, 2010 5:04 am
by shdbcamping
This WU has been reported at Folding forums at least a million times in the last month. Ok, a million is stretching it
. I have gotten it at least 25 times since it came out. Why PG keeps assigning it is annoying. It is (0,171,60).
My I7 rig is down again as the server has assigned it to me relentlessly over the past week. It delivers a windows runtime error and locks up the CPU until you hit the <OK> radio button. It will then automatically reassign the WU when the client restarts.
I have in the past gotten around it by closing the smpd.exe process (you have to use process tree) and then deleting the A3 file in the SMP folder. Of course all the other stuff as well. I reinstall the client and this gives me a 50/50 shot at getting a working WU. The problem is that this 6013 WU specifically will be assigned again after the other WU completes. I'm sick of having to waste my time for 'workarounds'. It seems this 6013 project is simply riddled with problems and they do not go away.
Anyone else getting this particular WU? Have you completed it if you have? If completed... Why are they still assigning it?
Sean
Re: Project 6013 (Run 0, Clone 171, Gen 60)
Posted: Sat Jun 19, 2010 1:21 pm
by shdbcamping
Can the servers NOT realize that they have /are assigning non-completeable WU's over and over and over and over and over and over?
Look at the log. This and many others of the 6013 WU class simply fail due to C+++ errors in windows. That is not a problem in and of itself though. The problem arrises where the client and the CPU hang until there is a 'manual' clicking of the <OK> radio button. Given enough time between the error message and the manual 'clicking', the system will crash completely. I have been assigned this WU relentlessly over the past week.
How does this benefit the Science.... An I7 "down" because of a faulty PG WU. There should be some way that PG AS servers could recognize a system that does not/cannot return assignments. If the Science is truly 'most important' to PG..... Why not FIX this problem???????
I'm sure you all can come up with a million excuses for how Donors are trying to "get one over on PG" and most likely will
. The question to ask yourselves about the Science is: Is engaging HW in continuous folding better than cramming WU's at HW that cannot complete them?????
If PG has any questions of any relevance to me as a Donor, please ask away. I'll continue to fold, but it is growing continually harder to figure out why. Being a Donor is expensive, being 'taken for granted' is shameful.
Code: Select all
--- Opening Log file [June 18 11:27:38 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\SMP
Executable: C:\SMP\smp.exe
Arguments: -smp 7
[11:27:38] - Ask before connecting: No
[11:27:38] - User name: shdbcamping (Team 80856)
[11:27:38] - User ID: 780D57517CF444EB
[11:27:38] - Machine ID: 1
[11:27:38]
[11:27:38] Could not open work queue, generating new queue...
[11:27:38] - Preparing to get new work unit...
[11:27138] Cleaning up work directory
[11:27:38] + Attempting to get work packet
[11:27:38] Passkey found
[11:27:38] - Connecting to assignment server
[11:27:38] - Successful: assigned to (130.237.232.140).
[11:27:38] + News From Folding@Home: Welcome to Folding@Home
[11:27:38] Loaded queue successfully.
[11:27:46] + Closed connections
[11:27:46]
[11:27:46] + Processing work unit
[11:27:46] Core required: FahCore_a3.exe
[11:27:46] Core not found.
[11:27:46] - Core is not present or corrupted.
[11:27:46] - Attempting to download new core...
[11:27:46] + Downloading new core: FahCore_a3.exe
[11:27:47] + 10240 bytes downloaded
[11:27:47] + 20480 bytes downloaded
[11:27:47] + 30720 bytes downloaded
[11:27:47] + 40960 bytes downloaded
[11:27:47] + 51200 bytes downloaded
[11:27:47] + 61440 bytes downloaded
[11:27:48] + 71680 bytes downloaded
[11:27:48] + 81920 bytes downloaded
[11:27:48] + 92160 bytes downloaded
[11:27:48] + 102400 bytes downloaded
[11:27:48] + 112640 bytes downloaded
[11:27:48] + 122880 bytes downloaded
[11:27:48] + 133120 bytes downloaded
[11:27:48] + 143360 bytes downloaded
[11:27:48] + 153600 bytes downloaded
[11:27:48] + 163840 bytes downloaded
[11:27:48] + 174080 bytes downloaded
[11:27:48] + 184320 bytes downloaded
[11:27:48] + 194560 bytes downloaded
[11:27:48] + 204800 bytes downloaded
[11:27:48] + 215040 bytes downloaded
[11:27:48] + 225280 bytes downloaded
[11:27:48] + 235520 bytes downloaded
[11:27:48] + 245760 bytes downloaded
[11:27:48] + 256000 bytes downloaded
[11:27:48] + 266240 bytes downloaded
[11:27:48] + 276480 bytes downloaded
[11:27:48] + 286720 bytes downloaded
[11:27:48] + 296960 bytes downloaded
[11:27:48] + 307200 bytes downloaded
[11:27:49] + 317440 bytes downloaded
[11:27:49] + 327680 bytes downloaded
[11:27:49] + 337920 bytes downloaded
[11:27:49] + 348160 bytes downloaded
[11:27:49] + 358400 bytes downloaded
[11:27:49] + 368640 bytes downloaded
[11:27:49] + 378880 bytes downloaded
[11:27:49] + 389120 bytes downloaded
[11:27:49] + 399360 bytes downloaded
[11:27:49] + 409600 bytes downloaded
[11:27:49] + 419840 bytes downloaded
[11:27:49] + 430080 bytes downloaded
[11:27:49] + 440320 bytes downloaded
[11:27:49] + 450560 bytes downloaded
[11:27:49] + 460800 bytes downloaded
[11:27:49] + 471040 bytes downloaded
[11:27:49] + 481280 bytes downloaded
[11:27:49] + 491520 bytes downloaded
[11:27:49] + 501760 bytes downloaded
[11:27:49] + 512000 bytes downloaded
[11:27:49] + 522240 bytes downloaded
[11:27:49] + 532480 bytes downloaded
[11:27:49] + 542720 bytes downloaded
[11:27:50] + 552960 bytes downloaded
[11:27:50] + 563200 bytes downloaded
[11:27:50] + 573440 bytes downloaded
[11:27:50] + 583680 bytes downloaded
[11:27:50] + 593920 bytes downloaded
[11:27:50] + 604160 bytes downloaded
[11:27:50] + 614400 bytes downloaded
[11:27:50] + 624640 bytes downloaded
[11:27:50] + 634880 bytes downloaded
[11:27:50] + 645120 bytes downloaded
[11:27:50] + 655360 bytes downloaded
[11:27:50] + 665600 bytes downloaded
[11:27:50] + 675840 bytes downloaded
[11:27:50] + 686080 bytes downloaded
[11:27:50] + 696320 bytes downloaded
[11:27:50] + 706560 bytes downloaded
[11:27:50] + 716800 bytes downloaded
[11:27:50] + 727040 bytes downloaded
[11:27:50] + 737280 bytes downloaded
[11:27:50] + 747520 bytes downloaded
[11:27:50] + 757760 bytes downloaded
[11:27:50] + 768000 bytes downloaded
[11:27:50] + 778240 bytes downloaded
[11:27:50] + 788480 bytes downloaded
[11:27:51] + 798720 bytes downloaded
[11:27:51] + 808960 bytes downloaded
[11:27:51] + 819200 bytes downloaded
[11:27:51] + 829440 bytes downloaded
[11:27:51] + 839680 bytes downloaded
[11:27:51] + 849920 bytes downloaded
[11:27:51] + 860160 bytes downloaded
[11:27:51] + 870400 bytes downloaded
[11:27:51] + 880640 bytes downloaded
[11:27:51] + 890880 bytes downloaded
[11:27:51] + 901120 bytes downloaded
[11:27:51] + 911360 bytes downloaded
[11:27:51] + 921600 bytes downloaded
[11:27:51] + 931840 bytes downloaded
[11:27:51] + 942080 bytes downloaded
[11:27:51] + 952320 bytes downloaded
[11:27:51] + 962560 bytes downloaded
[11:27:51] + 972800 bytes downloaded
[11:27:51] + 983040 bytes downloaded
[11:27:51] + 993280 bytes downloaded
[11:27:51] + 1003520 bytes downloaded
[11:27:51] + 1013760 bytes downloaded
[11:27:51] + 1024000 bytes downloaded
[11:27:51] + 1034240 bytes downloaded
[11:27:52] + 1044480 bytes downloaded
[11:27:52] + 1054720 bytes downloaded
[11:27:52] + 1064960 bytes downloaded
[11:27:52] + 1075200 bytes downloaded
[11:27:52] + 1085440 bytes downloaded
[11:27:52] + 1095680 bytes downloaded
[11:27:52] + 1105920 bytes downloaded
[11:27:52] + 1116160 bytes downloaded
[11:27:52] + 1126400 bytes downloaded
[11:27:52] + 1136640 bytes downloaded
[11:27:52] + 1146880 bytes downloaded
[11:27:52] + 1157120 bytes downloaded
[11:27:52] + 1167360 bytes downloaded
[11:27:52] + 1177600 bytes downloaded
[11:27:52] + 1187840 bytes downloaded
[11:27:52] + 1198080 bytes downloaded
[11:27:52] + 1208320 bytes downloaded
[11:27:52] + 1218560 bytes downloaded
[11:27:52] + 1228800 bytes downloaded
[11:27:52] + 1239040 bytes downloaded
[11:27:52] + 1249280 bytes downloaded
[11:27:52] + 1259520 bytes downloaded
[11:27:52] + 1269760 bytes downloaded
[11:27:53] + 1280000 bytes downloaded
[11:27:53] + 1290240 bytes downloaded
[11:27:53] + 1300480 bytes downloaded
[11:27:53] + 1310720 bytes downloaded
[11:27:53] + 1320960 bytes downloaded
[11:27:53] + 1331200 bytes downloaded
[11:27:53] + 1341440 bytes downloaded
[11:27:53] + 1351680 bytes downloaded
[11:27:53] + 1361920 bytes downloaded
[11:27:53] + 1372160 bytes downloaded
[11:27:53] + 1382400 bytes downloaded
[11:27:53] + 1392640 bytes downloaded
[11:27:53] + 1402880 bytes downloaded
[11:27:53] + 1413120 bytes downloaded
[11:27:53] + 1423360 bytes downloaded
[11:27:53] + 1433600 bytes downloaded
[11:27:53] + 1443840 bytes downloaded
[11:27:53] + 1454080 bytes downloaded
[11:27:53] + 1464320 bytes downloaded
[11:27:53] + 1474560 bytes downloaded
[11:27:53] + 1484800 bytes downloaded
[11:27:53] + 1495040 bytes downloaded
[11:27:53] + 1505280 bytes downloaded
[11:27:54] + 1515520 bytes downloaded
[11:27:54] + 1525760 bytes downloaded
[11:27:54] + 1536000 bytes downloaded
[11:27:54] + 1546240 bytes downloaded
[11:27:54] + 1556480 bytes downloaded
[11:27:54] + 1566720 bytes downloaded
[11:27:54] + 1576960 bytes downloaded
[11:27:54] + 1587200 bytes downloaded
[11:27:54] + 1597440 bytes downloaded
[11:27:54] + 1607680 bytes downloaded
[11:27:54] + 1617920 bytes downloaded
[11:27:54] + 1628160 bytes downloaded
[11:27:54] + 1638400 bytes downloaded
[11:27:54] + 1648640 bytes downloaded
[11:27:54] + 1658880 bytes downloaded
[11:27:54] + 1669120 bytes downloaded
[11:27:54] + 1679360 bytes downloaded
[11:27:54] + 1689600 bytes downloaded
[11:27:54] + 1699840 bytes downloaded
[11:27:54] + 1710080 bytes downloaded
[11:27:54] + 1720320 bytes downloaded
[11:27:54] + 1730560 bytes downloaded
[11:27:54] + 1740800 bytes downloaded
[11:27:54] + 1751040 bytes downloaded
[11:27:55] + 1761280 bytes downloaded
[11:27:55] + 1771520 bytes downloaded
[11:27:55] + 1781760 bytes downloaded
[11:27:55] + 1792000 bytes downloaded
[11:27:55] + 1802240 bytes downloaded
[11:27:55] + 1812480 bytes downloaded
[11:27:55] + 1822720 bytes downloaded
[11:27:55] + 1832960 bytes downloaded
[11:27:55] + 1843200 bytes downloaded
[11:27:55] + 1853440 bytes downloaded
[11:27:55] + 1863680 bytes downloaded
[11:27:55] + 1873920 bytes downloaded
[11:27:55] + 1884160 bytes downloaded
[11:27:55] + 1894400 bytes downloaded
[11:27:55] + 1904640 bytes downloaded
[11:27:55] + 1914880 bytes downloaded
[11:27:55] + 1925120 bytes downloaded
[11:27:55] + 1935360 bytes downloaded
[11:27:55] + 1945600 bytes downloaded
[11:27:55] + 1955840 bytes downloaded
[11:27:55] + 1966080 bytes downloaded
[11:27:55] + 1976320 bytes downloaded
[11:27:55] + 1986560 bytes downloaded
[11:27:55] + 1996800 bytes downloaded
[11:27:56] + 2007040 bytes downloaded
[11:27:56] + 2017280 bytes downloaded
[11:27:56] + 2027520 bytes downloaded
[11:27:56] + 2037760 bytes downloaded
[11:27:56] + 2048000 bytes downloaded
[11:27:56] + 2058240 bytes downloaded
[11:27:56] + 2068480 bytes downloaded
[11:27:56] + 2078720 bytes downloaded
[11:27:56] + 2088960 bytes downloaded
[11:27:56] + 2099200 bytes downloaded
[11:27:56] + 2109440 bytes downloaded
[11:27:56] + 2119680 bytes downloaded
[11:27:56] + 2129920 bytes downloaded
[11:27:56] + 2140160 bytes downloaded
[11:27:56] + 2150400 bytes downloaded
[11:27:56] + 2160640 bytes downloaded
[11:27:56] + 2170880 bytes downloaded
[11:27:56] + 2181120 bytes downloaded
[11:27:56] + 2191360 bytes downloaded
[11:27:56] + 2201600 bytes downloaded
[11:27:56] + 2211840 bytes downloaded
[11:27:56] + 2222080 bytes downloaded
[11:27:56] + 2232320 bytes downloaded
[11:27:57] + 2242560 bytes downloaded
[11:27:57] + 2252800 bytes downloaded
[11:27:57] + 2263040 bytes downloaded
[11:27:57] + 2273280 bytes downloaded
[11:27:57] + 2283520 bytes downloaded
[11:27:57] + 2293760 bytes downloaded
[11:27:57] + 2304000 bytes downloaded
[11:27:57] + 2314240 bytes downloaded
[11:27:57] + 2324480 bytes downloaded
[11:27:57] + 2334720 bytes downloaded
[11:27:57] + 2338814 bytes downloaded
[11:27:57] Verifying core Core_a3.fah...
[11:27:57] Signature is VALID
[11:27:57]
[11:27:57] Trying to unzip core FahCore_a3.exe
[11:27:57] Decompressed FahCore_a3.exe (8084992 bytes) successfully
[11:28:02] + Core successfully engaged
[11:28:07]
[11:28:07] + Processing work unit
[11:28:07] Core required: FahCore_a3.exe
[11:28:07] Core found.
[11:28:07] Working on queue slot 01 [June 18 11:28:07 UTC]
[11:28:07] + Working ...
[11:28:08]
[11:28:08] *------------------------------*
[11:28:08] Folding@Home Gromacs SMP Core
[11:28:08] Version 2.19 (Mar 12, 2010)
[11:28:08]
[11:28:08] Preparing to commence simulation
[11:28:08] - Looking at optimizations...
[11:28:08] - Created dyn
[11:28:08] - Files status OK
[11:28:08] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[11:28:08] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[11:28:08] - Digital signature verified
[11:28:08]
[11:28:08] Project: 6013 (Run 0, Clone 171, Gen 60)
[11:28:08]
[11:28:09] Assembly optimizations on if available.
[11:28:09] Entering M.D.
[11:31:04] Completed 0 out of 250000 steps (0%)
[12:08:18] CoreStatus = 3 (3)
[12:08:18] Client-core communications error: ERROR 0x3
[12:08:18] Deleting current work unit & continuing...
[12:08:30] - Preparing to get new work unit...
[12:08:30] Cleaning up work directory
[12:08:30] + Attempting to get work packet
[12:08:30] Passkey found
[12:08:30] - Connecting to assignment server
[12:08:31] - Successful: assigned to (130.237.232.140).
[12:08:31] + News From Folding@Home: Welcome to Folding@Home
[12:08:31] Loaded queue successfully.
[12:08:39] + Closed connections
[12:08:44]
[12:08:44] + Processing work unit
[12:08:44] Core required: FahCore_a3.exe
[12:08:44] Core found.
[12:08:44] Working on queue slot 02 [June 18 12:08:44 UTC]
[12:08:44] + Working ...
[12:08:45]
[12:08:45] *------------------------------*
[12:08:45] Folding@Home Gromacs SMP Core
[12:08:45] Version 2.19 (Mar 12, 2010)
[12:08:45]
[12:08:45] Preparing to commence simulation
[12:08:45] - Looking at optimizations...
[12:08:45] - Created dyn
[12:08:45] - Files status OK
[12:08:45] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[12:08:45] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[12:08:45] - Digital signature verified
[12:08:45]
[12:08:45] Project: 6013 (Run 0, Clone 171, Gen 60)
[12:08:45]
[12:08:45] Assembly optimizations on if available.
[12:08:45] Entering M.D.
[12:11:43] Completed 0 out of 250000 steps (0%)
[12:53:07] CoreStatus = 3 (3)
[12:53:07] Client-core communications error: ERROR 0x3
[12:53:07] Deleting current work unit & continuing...
[12:53:19] - Preparing to get new work unit...
[12:53:19] Cleaning up work directory
[12:53:19] + Attempting to get work packet
[12:53:19] Passkey found
[12:53:19] - Connecting to assignment server
[12:53:19] - Successful: assigned to (171.64.65.54).
[12:53:19] + News From Folding@Home: Welcome to Folding@Home
[12:53:20] Loaded queue successfully.
[12:53:29] + Closed connections
[12:53:34]
[12:53:34] + Processing work unit
[12:53:34] Core required: FahCore_a3.exe
[12:53:34] Core found.
[12:53:34] Working on queue slot 03 [June 18 12:53:34 UTC]
[12:53:34] + Working ...
[12:53:34]
[12:53:34] *------------------------------*
[12:53:34] Folding@Home Gromacs SMP Core
[12:53:34] Version 2.19 (Mar 12, 2010)
[12:53:34]
[12:53:34] Preparing to commence simulation
[12:53:34] - Looking at optimizations...
[12:53:34] - Created dyn
[12:53:34] - Files status OK
[12:53:35] - Expanded 1763352 -> 2246261 (decompressed 127.3 percent)
[12:53:35] Called DecompressByteArray: compressed_data_size=1763352 data_size=2246261, decompressed_data_size=2246261 diff=0
[12:53:35] - Digital signature verified
[12:53:35]
[12:53:35] Project: 6071 (Run 0, Clone 59, Gen 51)
[12:53:35]
[12:53:35] Assembly optimizations on if available.
[12:53:35] Entering M.D.
[12:53:41] Completed 0 out of 500000 steps (0%)
[12:57:19] Completed 5000 out of 500000 steps (1%)
[13:00:57] Completed 10000 out of 500000 steps (2%)
[13:04:34] Completed 15000 out of 500000 steps (3%)
[13:08:12] Completed 20000 out of 500000 steps (4%)
[13:11:50] Completed 25000 out of 500000 steps (5%)
[13:15:28] Completed 30000 out of 500000 steps (6%)
[13:19:06] Completed 35000 out of 500000 steps (7%)
[13:22:43] Completed 40000 out of 500000 steps (8%)
[13:26:21] Completed 45000 out of 500000 steps (9%)
[13:29:58] Completed 50000 out of 500000 steps (10%)
[13:33:36] Completed 55000 out of 500000 steps (11%)
[13:37:13] Completed 60000 out of 500000 steps (12%)
[13:40:51] Completed 65000 out of 500000 steps (13%)
[13:44:29] Completed 70000 out of 500000 steps (14%)
[13:48:07] Completed 75000 out of 500000 steps (15%)
[13:51:45] Completed 80000 out of 500000 steps (16%)
[13:55:23] Completed 85000 out of 500000 steps (17%)
[13:59:01] Completed 90000 out of 500000 steps (18%)
[14:02:38] Completed 95000 out of 500000 steps (19%)
[14:06:16] Completed 100000 out of 500000 steps (20%)
[14:09:54] Completed 105000 out of 500000 steps (21%)
[14:13:31] Completed 110000 out of 500000 steps (22%)
[14:17:08] Completed 115000 out of 500000 steps (23%)
[14:20:46] Completed 120000 out of 500000 steps (24%)
[14:24:23] Completed 125000 out of 500000 steps (25%)
[14:28:00] Completed 130000 out of 500000 steps (26%)
[14:31:37] Completed 135000 out of 500000 steps (27%)
[14:35:15] Completed 140000 out of 500000 steps (28%)
[14:38:52] Completed 145000 out of 500000 steps (29%)
[14:42:29] Completed 150000 out of 500000 steps (30%)
[14:46:07] Completed 155000 out of 500000 steps (31%)
[14:49:44] Completed 160000 out of 500000 steps (32%)
[14:53:21] Completed 165000 out of 500000 steps (33%)
[14:56:58] Completed 170000 out of 500000 steps (34%)
[15:00:36] Completed 175000 out of 500000 steps (35%)
[15:04:13] Completed 180000 out of 500000 steps (36%)
[15:07:51] Completed 185000 out of 500000 steps (37%)
[15:11:28] Completed 190000 out of 500000 steps (38%)
[15:15:06] Completed 195000 out of 500000 steps (39%)
[15:18:43] Completed 200000 out of 500000 steps (40%)
[15:22:21] Completed 205000 out of 500000 steps (41%)
[15:25:58] Completed 210000 out of 500000 steps (42%)
[15:29:35] Completed 215000 out of 500000 steps (43%)
[15:33:13] Completed 220000 out of 500000 steps (44%)
[15:36:50] Completed 225000 out of 500000 steps (45%)
[15:40:27] Completed 230000 out of 500000 steps (46%)
[15:44:05] Completed 235000 out of 500000 steps (47%)
[15:47:42] Completed 240000 out of 500000 steps (48%)
[15:51:20] Completed 245000 out of 500000 steps (49%)
[15:54:57] Completed 250000 out of 500000 steps (50%)
[15:58:35] Completed 255000 out of 500000 steps (51%)
[16:02:12] Completed 260000 out of 500000 steps (52%)
[16:05:49] Completed 265000 out of 500000 steps (53%)
[16:09:27] Completed 270000 out of 500000 steps (54%)
[16:13:04] Completed 275000 out of 500000 steps (55%)
[16:16:41] Completed 280000 out of 500000 steps (56%)
[16:20:19] Completed 285000 out of 500000 steps (57%)
[16:23:56] Completed 290000 out of 500000 steps (58%)
[16:27:34] Completed 295000 out of 500000 steps (59%)
[16:31:16] Completed 300000 out of 500000 steps (60%)
[16:35:03] Completed 305000 out of 500000 steps (61%)
[16:38:51] Completed 310000 out of 500000 steps (62%)
[16:42:38] Completed 315000 out of 500000 steps (63%)
[16:46:25] Completed 320000 out of 500000 steps (64%)
[16:50:12] Completed 325000 out of 500000 steps (65%)
[16:53:59] Completed 330000 out of 500000 steps (66%)
[16:57:47] Completed 335000 out of 500000 steps (67%)
[17:01:35] Completed 340000 out of 500000 steps (68%)
[17:05:23] Completed 345000 out of 500000 steps (69%)
[17:09:11] Completed 350000 out of 500000 steps (70%)
[17:13:00] Completed 355000 out of 500000 steps (71%)
[17:16:50] Completed 360000 out of 500000 steps (72%)
[17:20:39] Completed 365000 out of 500000 steps (73%)
[17:24:28] Completed 370000 out of 500000 steps (74%)
[17:28:18] Completed 375000 out of 500000 steps (75%)
[17:32:05] Completed 380000 out of 500000 steps (76%)
[17:35:50] Completed 385000 out of 500000 steps (77%)
[17:39:35] Completed 390000 out of 500000 steps (78%)
[17:43:20] Completed 395000 out of 500000 steps (79%)
[17:47:05] Completed 400000 out of 500000 steps (80%)
[17:50:51] Completed 405000 out of 500000 steps (81%)
[17:54:37] Completed 410000 out of 500000 steps (82%)
[17:58:22] Completed 415000 out of 500000 steps (83%)
[18:02:05] Completed 420000 out of 500000 steps (84%)
[18:05:48] Completed 425000 out of 500000 steps (85%)
[18:09:30] Completed 430000 out of 500000 steps (86%)
[18:13:10] Completed 435000 out of 500000 steps (87%)
[18:16:47] Completed 440000 out of 500000 steps (88%)
[18:20:23] Completed 445000 out of 500000 steps (89%)
[18:24:00] Completed 450000 out of 500000 steps (90%)
[18:27:36] Completed 455000 out of 500000 steps (91%)
[18:31:12] Completed 460000 out of 500000 steps (92%)
[18:34:49] Completed 465000 out of 500000 steps (93%)
[18:38:26] Completed 470000 out of 500000 steps (94%)
[18:42:02] Completed 475000 out of 500000 steps (95%)
[18:45:39] Completed 480000 out of 500000 steps (96%)
[18:49:15] Completed 485000 out of 500000 steps (97%)
[18:52:52] Completed 490000 out of 500000 steps (98%)
[18:56:28] Completed 495000 out of 500000 steps (99%)
[19:00:05] Completed 500000 out of 500000 steps (100%)
[19:00:06] DynamicWrapper: Finished Work Unit: sleep=10000
[19:00:16]
[19:00:16] Finished Work Unit:
[19:00:16] - Reading up to 3697488 from "work/wudata_03.trr": Read 3697488
[19:00:16] trr file hash check passed.
[19:00:16] edr file hash check passed.
[19:00:16] logfile size: 54820
[19:00:16] Leaving Run
[19:00:20] - Writing 3787860 bytes of core data to disk...
[19:00:20] ... Done.
[19:00:21] - Shutting down core
[19:00:21]
[19:00:21] Folding@home Core Shutdown: FINISHED_UNIT
[19:00:24] CoreStatus = 64 (100)
[19:00:24] Sending work to server
[19:00:24] Project: 6071 (Run 0, Clone 59, Gen 51)
[19:00:24] + Attempting to send results [June 18 19:00:24 UTC]
[19:01:47] + Results successfully sent
[19:01:47] Thank you for your contribution to Folding@Home.
[19:01:47] + Number of Units Completed: 118
[19:01:51] - Preparing to get new work unit...
[19:01:51] Cleaning up work directory
[19:01:51] + Attempting to get work packet
[19:01:51] Passkey found
[19:01:51] - Connecting to assignment server
[19:01:52] - Successful: assigned to (130.237.232.140).
[19:01:52] + News From Folding@Home: Welcome to Folding@Home
[19:01:52] Loaded queue successfully.
[19:02:00] + Closed connections
[19:02:00]
[19:02:00] + Processing work unit
[19:02:00] Core required: FahCore_a3.exe
[19:02:00] Core found.
[19:02:00] Working on queue slot 04 [June 18 19:02:00 UTC]
[19:02:00] + Working ...
[19:02:00]
[19:02:00] *------------------------------*
[19:02:00] Folding@Home Gromacs SMP Core
[19:02:00] Version 2.19 (Mar 12, 2010)
[19:02:00]
[19:02:00] Preparing to commence simulation
[19:02:00] - Looking at optimizations...
[19:02:00] - Created dyn
[19:02:00] - Files status OK
[19:02:01] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[19:02:01] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[19:02:01] - Digital signature verified
[19:02:01]
[19:02:01] Project: 6013 (Run 0, Clone 171, Gen 60)
[19:02:01]
[19:02:01] Assembly optimizations on if available.
[19:02:01] Entering M.D.
[19:04:56] Completed 0 out of 250000 steps (0%)
[02:33:56] CoreStatus = 3 (3)
[02:33:56] Client-core communications error: ERROR 0x3
[02:33:56] Deleting current work unit & continuing...
[02:34:08] - Preparing to get new work unit...
[02:34:08] Cleaning up work directory
[02:34:08] + Attempting to get work packet
[02:34:08] Passkey found
[02:34:08] - Connecting to assignment server
[02:34:09] - Successful: assigned to (130.237.232.140).
[02:34:09] + News From Folding@Home: Welcome to Folding@Home
[02:34:09] Loaded queue successfully.
[02:34:17] + Closed connections
[02:34:22]
[02:34:22] + Processing work unit
[02:34:22] Core required: FahCore_a3.exe
[02:34:22] Core found.
[02:34:22] Working on queue slot 05 [June 19 02:34:22 UTC]
[02:34:22] + Working ...
[02:34:22]
[02:34:22] *------------------------------*
[02:34:22] Folding@Home Gromacs SMP Core
[02:34:22] Version 2.19 (Mar 12, 2010)
[02:34:22]
[02:34:22] Preparing to commence simulation
[02:34:22] - Looking at optimizations...
[02:34:22] - Created dyn
[02:34:22] - Files status OK
[02:34:23] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[02:34:23] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[02:34:23] - Digital signature verified
[02:34:23]
[02:34:23] Project: 6013 (Run 0, Clone 171, Gen 60)
[02:34:23]
[02:34:23] Assembly optimizations on if available.
[02:34:23] Entering M.D.
[02:37:18] Completed 0 out of 250000 steps (0%)
Folding@Home Client Shutdown at user request.
Folding@Home Client Shutdown.
--- Opening Log file [June 19 12:00:56 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\SMP
Executable: C:\SMP\smp.exe
Arguments: -smp 7
[12:00:56] - Ask before connecting: No
[12:00:56] - User name: shdbcamping (Team 80856)
[12:00:56] - User ID: 780D57517CF444EB
[12:00:56] - Machine ID: 1
[12:00:56]
[12:00:57] Loaded queue successfully.
[12:00:57]
[12:00:57] + Processing work unit
[12:00:57] Core required: FahCore_a3.exe
[12:00:57] Core found.
[12:00:57] Working on queue slot 05 [June 19 12:00:57 UTC]
[12:00:57] + Working ...
[12:00:57]
[12:00:57] *------------------------------*
[12:00:57] Folding@Home Gromacs SMP Core
[12:00:57] Version 2.19 (Mar 12, 2010)
[12:00:57]
[12:00:57] Preparing to commence simulation
[12:00:57] - Ensuring status. Please wait.
[12:01:06] - Looking at optimizations...
[12:01:06] - Working with standard loops on this execution.
[12:01:06] - Previous termination of core was improper.
[12:01:06] - Files status OK
[12:01:07] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[12:01:07] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[12:01:07] - Digital signature verified
[12:01:07]
[12:01:07] Project: 6013 (Run 0, Clone 171, Gen 60)
[12:01:07]
[12:01:07] Entering M.D.
[12:04:02] Completed 0 out of 250000 steps (0%)
--- Opening Log file [June 19 12:17:57 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\SMP
Executable: C:\SMP\smp.exe
Arguments: -smp 7
[12:17:57] - Ask before connecting: No
[12:17:57] - User name: shdbcamping (Team 80856)
[12:17:57] - User ID: 780D57517CF444EB
[12:17:57] - Machine ID: 1
[12:17:57]
[12:17:58] Loaded queue successfully.
[12:17:58]
[12:17:58] + Processing work unit
[12:17:58] Core required: FahCore_a3.exe
[12:17:58] Core found.
[12:17:58] Working on queue slot 05 [June 19 12:17:58 UTC]
[12:17:58] + Working ...
[12:17:58]
[12:17:58] *------------------------------*
[12:17:58] Folding@Home Gromacs SMP Core
[12:17:58] Version 2.19 (Mar 12, 2010)
[12:17:58]
[12:17:58] Preparing to commence simulation
[12:17:58] - Ensuring status. Please wait.
[12:18:08] - Looking at optimizations...
[12:18:08] - Working with standard loops on this execution.
[12:18:08] - Previous termination of core was improper.
[12:18:08] - Going to use standard loops.
[12:18:08] - Files status OK
[12:18:08] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[12:18:08] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[12:18:08] - Digital signature verified
[12:18:08]
[12:18:08] Project: 6013 (Run 0, Clone 171, Gen 60)
[12:18:08]
[12:18:08] Entering M.D.
[12:20:50] Completed 0 out of 250000 steps (0%)
[12:53:38] CoreStatus = 3 (3)
[12:53:38] Client-core communications error: ERROR 0x3
[12:53:38] Deleting current work unit & continuing...
[12:53:50] - Preparing to get new work unit...
[12:53:50] Cleaning up work directory
[12:53:50] + Attempting to get work packet
[12:53:50] Passkey found
[12:53:50] - Connecting to assignment server
[12:53:51] - Successful: assigned to (130.237.232.140).
[12:53:51] + News From Folding@Home: Welcome to Folding@Home
[12:53:51] Loaded queue successfully.
[12:53:59] + Closed connections
[12:54:04]
[12:54:04] + Processing work unit
[12:54:04] Core required: FahCore_a3.exe
[12:54:04] Core found.
[12:54:04] Working on queue slot 06 [June 19 12:54:04 UTC]
[12:54:04] + Working ...
[12:54:04]
[12:54:04] *------------------------------*
[12:54:04] Folding@Home Gromacs SMP Core
[12:54:04] Version 2.19 (Mar 12, 2010)
[12:54:04]
[12:54:04] Preparing to commence simulation
[12:54:04] - Looking at optimizations...
[12:54:04] - Created dyn
[12:54:04] - Files status OK
[12:54:05] - Expanded 976567 -> 10427873 (decompressed 1067.8 percent)
[12:54:05] Called DecompressByteArray: compressed_data_size=976567 data_size=10427873, decompressed_data_size=10427873 diff=0
[12:54:05] - Digital signature verified
[12:54:05]
[12:54:05] Project: 6013 (Run 0, Clone 171, Gen 60)
[12:54:05]
[12:54:05] Assembly optimizations on if available.
[12:54:05] Entering M.D.
[12:56:51] Completed 0 out of 250000 steps (0%)
Re: Project 6013 (Run 0, Clone 171, Gen 60)
Posted: Sat Jun 19, 2010 1:32 pm
by Bob8421
This work unit has now been received THREE times and every time I have to delete it. There is no way it can possibly finish within the deadline and absolutely no science is being accomplished if I let it run for three days only to have the work thrown away.
I have also received a different work unit with the same problem -- see above. Others have reported receiving work units that run for 75 minutes per step. That is exactly TEN times longer than the 7.5 minutes taken by most other 6013 work units.
As far as I know, this issue has been totally ignored. Would somebody PLEASE flag these work units as defective? Would PG please look at these work units to see what is different about them? A wild guess would be a misplaced decimal point somewhere since the run times differ by a factor of 10.
Re: Project 6013 (Run 0, Clone 171, Gen 60)
Posted: Sat Jun 19, 2010 2:58 pm
by VijayPande
Sorry about this one. This one was weird. It's not a human error, since it's a Gen 60 (meaning it's been run 59 times ok so far). Also, it's surprising the WS didn't kill it automatically (normally we shouldn't have to worry about doing this manually -- if we did each of these manually, we'd never get anything else done). Anyway, this one is out of control, so we manually killed it so you shouldn't be seeing it.
Re: Project 6013 (Run 0, Clone 171, Gen 60)
Posted: Sat Jun 19, 2010 3:24 pm
by bruce
The specific WU has been stopped. Feel free to discard any copies that may still be running on your machine.
This is a perfect example of how you can help FAH by searching before you post. Once I merged several different topics on the same subject, the pattern became clear but as separate (and potentially unrelated reports) it's hard to get the " big picture" In the future, if anybody spots more than one topic on the same WU, feel free to use the "Report Post . . . (other)" function and ask a Mod to merge them. (Report either of them and give us a link to the other one.)
I've asked the Pande Group to look at whether this is a few bad WUs or if it's an entire project (and obviously they'll look for a bug in the core, too).
Re: Project 6013 (Run 0, Clone 171, Gen 60)
Posted: Sun Jun 27, 2010 1:34 am
by stevehat1
I think these troublesome 6013's are back.....This one has been on the 1st frame for over 2 hours with no activity, but cpu load is at 100%. i7 @ 4G normally does these in about 3:04.
No error messages from Vista yet like on the previous 6013's.
Another folder at Redline-Redux report a similar occurance this morning with a 6013.
Since PG killed the older 6013 I have successfully completed some newer 6013's, but this one is acting like the old units.
Tried restarting the client and after 6+ minutes gave up. See Log Files
I hope this can be rectified soon as this machine is probably 99%+ effective on A3 WU's.
Code: Select all
22:43:26] Initial: 0000; - Receiving payload (expected size: 979919)
[22:43:30] - Downloaded at ~239 kB/s
[22:43:30] - Averaged speed for that direction ~1283 kB/s
[22:43:30] + Received work.
[22:43:30] Trying to send all finished work units
[22:43:30] + No unsent completed units remaining.
[22:43:30] + Closed connections
[22:43:30]
[22:43:30] + Processing work unit
[22:43:30] Core required: FahCore_a3.exe
[22:43:30] Core found.
[22:43:30] Working on queue slot 04 [June 26 22:43:30 UTC]
[22:43:30] + Working ...
[22:43:30] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 04 -np 8 -checkpoint 15 -verbose -lifeline 16832 -version 629'
[22:43:30]
[22:43:30] *------------------------------*
[22:43:30] Folding@Home Gromacs SMP Core
[22:43:30] Version 2.22 (Mar 12, 2010)
[22:43:30]
[22:43:30] Preparing to commence simulation
[22:43:30] - Looking at optimizations...
[22:43:30] - Created dyn
[22:43:30] - Files status OK
[22:43:30] - Expanded 979407 -> 10427873 (decompressed 1064.7 percent)
[22:43:30] Called DecompressByteArray: compressed_data_size=979407 data_size=10427873, decompressed_data_size=10427873 diff=0
[22:43:30] - Digital signature verified
[22:43:30]
[22:43:30] Project: 6013 (Run 0, Clone 73, Gen 125)
[22:43:30]
[22:43:30] Assembly optimizations on if available.
[22:43:30] Entering M.D.
[22:44:18] - Autosending finished units... [June 26 22:44:18 UTC]
[22:44:18] Trying to send all finished work units
[22:44:18] + No unsent completed units remaining.
[22:44:18] - Autosend completed
[22:45:45] Completed 0 out of 250000 steps (0%)
[01:15:36] Killing all core threads
[01:15:36] Killing 2 cores
[01:15:36] Killing core 0
[01:15:36] Killing core 1
Folding@Home Client Shutdown at user request.
[01:15:36] ***** Got a SIGTERM signal (2)
[01:15:36] Killing all core threads
[01:15:36] Killing 2 cores
[01:15:36] Killing core 0
[01:15:36] Killing core 1
Folding@Home Client Shutdown.
Code: Select all
Executable: C:\SMP\[email protected]
Arguments: -smp -verbosity 9
[01:15:41] - Ask before connecting: No
[01:15:41] - User name: stevehat1 (Team 98860)
[01:15:41] - User ID: 3431CA423215A97F
[01:15:41] - Machine ID: 1
[01:15:41]
[01:15:41] Loaded queue successfully.
[01:15:41]
[01:15:41] + Processing work unit
[01:15:41] - Autosending finished units... [June 27 01:15:41 UTC]
[01:15:41] Core required: FahCore_a3.exe
[01:15:41] Trying to send all finished work units
[01:15:41] Core found.
[01:15:41] + No unsent completed units remaining.
[01:15:41] - Autosend completed
[01:15:41] Working on queue slot 04 [June 27 01:15:41 UTC]
[01:15:41] + Working ...
[01:15:41] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 04 -np 8 -checkpoint 15 -verbose -lifeline 19972 -version 629'
[01:15:41]
[01:15:41] *------------------------------*
[01:15:41] Folding@Home Gromacs SMP Core
[01:15:41] Version 2.22 (Mar 12, 2010)
[01:15:41]
[01:15:41] Preparing to commence simulation
[01:15:41] - Ensuring status. Please wait.
[01:15:51] - Looking at optimizations...
[01:15:51] - Working with standard loops on this execution.
[01:15:51] - Previous termination of core was improper.
[01:15:51] - Files status OK
[01:15:51] - Expanded 979407 -> 10427873 (decompressed 1064.7 percent)
[01:15:51] Called DecompressByteArray: compressed_data_size=979407 data_size=10427873, decompressed_data_size=10427873 diff=0
[01:15:51] - Digital signature verified
[01:15:51]
[01:15:51] Project: 6013 (Run 0, Clone 73, Gen 125)
[01:15:51]
[01:15:51] Entering M.D.
[01:15:57] Using Gromacs checkpoints
[01:15:59] Resuming from checkpoint
[01:15:59] Verified work/wudata_04.log
[01:15:59] Verified work/wudata_04.trr
[01:15:59] Verified work/wudata_04.xtc
[01:15:59] Verified work/wudata_04.edr
[01:18:07] Completed 608 out of 250000 steps (0%)
[01:25:56] Killing all core threads
[01:25:56] Killing 2 cores
[01:25:56] Killing core 0
[01:25:56] Killing core 1
Folding@Home Client Shutdown at user request.
[01:25:56] ***** Got a SIGTERM signal (2)
[01:25:56] Killing all core threads
[01:25:56] Killing 2 cores
[01:25:56] Killing core 0
[01:25:56] Killing core 1
Folding@Home Client Shutdown.