Page 1 of 1
Cannot upload to 171.64.65.62
Posted: Sat May 01, 2010 6:49 am
by amuro.ID
My client already trying to upload to this server for about 2 days.
Code: Select all
06:55:34] Loaded queue successfully.
[06:55:34] Attempting to return result(s) to server...
[06:55:34] Project: 6501 (Run 9, Clone 741, Gen 2)
[06:55:34] + Attempting to send results [May 1 06:55:34 UTC]
[06:55:35] - Couldn't send HTTP request to server
[06:55:35] (Got status 504)
[06:55:35] + Could not connect to Work Server (results)
[06:55:35] (171.64.65.62:8080)
[06:55:35] + Retrying using alternative port
[06:55:36] - Couldn't send HTTP request to server
[06:55:36] (Got status 504)
[06:55:36] + Could not connect to Work Server (results)
[06:55:36] (171.64.65.62:80)
[06:55:36] - Error: Could not transmit unit 04 (completed April 30) to work server.
[06:55:36] + Attempting to send results [May 1 06:55:36 UTC]
[06:56:35] - Server does not have record of this unit. Will try again later.
[06:56:35] Could not transmit unit 04 to Collection server; keeping in queue.
[06:56:35] - Failed to send unit 04 to server
Folding@Home Client Shutdown.
Re: Cannot upload to 171.64.65.62
Posted: Tue May 11, 2010 1:18 pm
by Char_Ell
Looks like I'm experiencing the same issue.
Accessing
http://171.64.65.62 using my web browser returns "unable to connect" message. Same response when attempting to access port 8080.
The server status page shows 171.64.65.62 with status=Full and connect=Reject
The log page for 171.64.65.62 shows this server has been Full/Reject since Sun May 9 10:35:10 PDT 2010
My CPU client will of course keep attempting to resend but posting this just in case someone, like maybe vvoelz, isn't aware...
Code: Select all
[10:25:47] + Attempting to send results [May 11 10:25:47 UTC]
[10:25:48] - Couldn't send HTTP request to server
[10:25:48] + Could not connect to Work Server (results)
[10:25:48] (171.64.65.62:8080)
[10:25:48] + Retrying using alternative port
[10:25:49] - Couldn't send HTTP request to server
[10:25:49] + Could not connect to Work Server (results)
[10:25:49] (171.64.65.62:80)
[10:25:49] - Error: Could not transmit unit 05 (completed May 9) to work server.
[10:25:49] - Read packet limit of 540015616... Set to 524286976.
[10:25:49] + Attempting to send results [May 11 10:25:49 UTC]
[10:25:51] - Server does not have record of this unit. Will try again later.
[10:25:51] Could not transmit unit 05 to Collection server; keeping in queue.
Re: Cannot upload to 171.64.65.62
Posted: Wed May 12, 2010 3:14 am
by DrBB1
Cannot upload to this server. There does not appear to be an alternate collection server assigned. Note message, "Server does not have a record of this unit." So far, upload has failed 15 times. I do not see anything wrong when I check server status. Can anyone provide an explanation of what the problem may be?
Code: Select all
[14:52:58] Project: 6503 (Run 14, Clone 581, Gen 22)
[14:52:58] - Read packet limit of 540015616... Set to 524286976.
[14:52:58] + Attempting to send results [May 11 14:52:58 UTC]
[14:52:59] - Couldn't send HTTP request to server
[14:52:59] + Could not connect to Work Server (results)
[14:52:59] (171.64.65.62:8080)
[14:52:59] + Retrying using alternative port
[14:53:01] - Couldn't send HTTP request to server
[14:53:01] + Could not connect to Work Server (results)
[14:53:01] (171.64.65.62:80)
[14:53:01] - Error: Could not transmit unit 09 (completed May 9) to work server.
[14:53:01] - Read packet limit of 540015616... Set to 524286976.
[14:53:01] + Attempting to send results [May 11 14:53:01 UTC]
[14:53:02] - Server does not have record of this unit. Will try again later.
[14:53:02] Could not transmit unit 09 to Collection server; keeping in queue.
[14:53:02] + Working...
Re: Cannot upload to 171.64.65.62
Posted: Wed May 12, 2010 7:35 am
by bruce
Sometimes the message "Server does not have record of this unit" is due to an interruption in communications between the Work Server and the Collection Server. Other times, it means that the WU has already been uploaded. In this case, you did get (partial) credit for it and uploading it again isn't going to be accepted. I suggest you delete the WU so your client will stop repeatedly trying to upload it.
Hi DrBB1 (team 39340),
Your WU (P6503 R14 C581 G22) was added to the stats database on 2010-05-11 14:03:07 for 59.45 points of credit.
The message " Read packet limit of 540015616... Set to 524286976." has never been adequately explained, but it does seem to be related to some kind of upload problems.
------------------
The Reject status of 171.64.65.62 was corrected about 14 hours ago and it has been busy dealing with the backlog. It seems to be getting back to normal now.
Re: Cannot upload to 171.64.65.62
Posted: Wed May 12, 2010 1:29 pm
by Char_Ell
Thanks Bruce. I can confirm my CPU client successfully uploaded my WU for Project: 6501 (Run 17, Clone 840, Gen 8) completed May 9 about 7 hours ago.
Re: Cannot upload to 171.64.65.62
Posted: Wed May 12, 2010 3:34 pm
by DrBB1
Bruce,
Thanks for the explanation. With respect to the following,
Hi DrBB1 (team 39340),
Your WU (P6503 R14 C581 G22) was added to the stats database on 2010-05-11 14:03:07 for 59.45 points of credit.
is there a way for me to access this information about the status of one of my own uploads, or is this something only administrators have access to?
Thanks for the help.
Re: Cannot upload to 171.64.65.62
Posted: Wed May 12, 2010 3:44 pm
by PantherX
bruce wrote:The message " Read packet limit of 540015616... Set to 524286976." has never been adequately explained, but it does seem to be related to some kind of upload problems.
When I asked about it, the response was it wasn't an error but a notification. Here is some more info (
http://foldingforum.org/viewtopic.php?f=47&t=13747)
Re: Cannot upload to 171.64.65.62
Posted: Wed May 12, 2010 4:52 pm
by bruce
DrBB1 wrote:Bruce,
Thanks for the explanation. With respect to the following,
Hi DrBB1 (team 39340),
Your WU (P6503 R14 C581 G22) was added to the stats database on 2010-05-11 14:03:07 for 59.45 points of credit.
is there a way for me to access this information about the status of one of my own uploads, or is this something only administrators have access to?
Thanks for the help.
Sorry, but it's for forum Moderators only.
Re: Cannot upload to 171.64.65.62
Posted: Thu May 13, 2010 2:40 am
by DrBB1
Sorry, but it's for forum Moderators only.
That's what I figured, but since the message started "Hi DrBB1...," I thought it might be for users, too. No harm in asking...
Thanks again, Bruce.
Re: Cannot upload to 171.64.65.62
Posted: Thu May 13, 2010 7:48 am
by codysluder
Bruce was telling you what the database says for (P6503 R14 C581 G22). It knows who you are and what team you're on and that's apparently automatically part of the reports that the mods post when they're helping anybody.