Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

please read my logs very slow folding pc

https://foldingforum.org/viewtopic.php?t=11962

Page 1 of 1

please read my logs very slow folding pc

Posted: Sun Oct 25, 2009 7:58 pm
by harry48
i find it very slow for my pc to fold at times , the one i'm on is 0/500 and i find it slower than a 0/2,500 , i copied my log file for you to read please and also my queue info the queue slot now is 0 , lets know if all is ok , harry

Code: Select all

Current Queue: 
Slot 01  Empty/Deleted
Project: 4457 (Run 116, Clone 4, Gen 10), Core: 78
Work server: 171.67.108.13:8080
Collection server: 171.67.108.17
Download date: April 8 22:28:48
Finished date: January 1 00:00:00

Slot 02  Empty/Deleted
Project: 5113 (Run 107, Clone 5, Gen 6), Core: a0
Work server: 171.67.108.12:8080
Collection server: 171.67.108.25
Download date: April 8 22:32:12
Finished date: May 7 20:57:18

Slot 03  Empty/Deleted
Project: 4458 (Run 327, Clone 1, Gen 16), Core: 78
Work server: 171.67.108.13:8080
Collection server: 171.67.108.17
Download date: May 7 20:57:23
Finished date: June 4 20:16:00

Slot 04  Empty/Deleted
Project: 3863 (Run 599, Clone 3, Gen 7), Core: 7c
Work server: 128.143.48.226:8080
Collection server: 128.143.48.227
Download date: June 4 20:16:19
Finished date: June 23 20:45:33

Slot 05  Empty/Deleted
Project: 3864 (Run 382, Clone 11, Gen 0), Core: 7c
Work server: 128.143.48.226:8080
Collection server: 128.143.48.227
Download date: June 23 20:46:01
Finished date: June 23 21:00:55

Slot 06  Empty/Deleted
Project: 3863 (Run 545, Clone 10, Gen 10), Core: 7c
Work server: 128.143.48.226:8080
Collection server: 128.143.48.227
Download date: June 23 21:01:05
Finished date: July 16 19:41:34

Slot 07  Empty/Deleted
Project: 3860 (Run 54, Clone 18, Gen 8), Core: 7c
Work server: 128.143.48.226:8080
Collection server: 128.143.48.227
Download date: July 16 19:42:15
Finished date: September 3 21:35:37
Failed uploads: 4

Slot 08  Empty/Deleted
Project: 4438 (Run 532, Clone 2, Gen 37), Core: 78
Work server: 171.67.108.13:8080
Collection server: 171.67.108.17
Download date: September 3 21:36:54
Finished date: October 2 20:29:50

Slot 09  Empty/Deleted
Project: 4624 (Run 30, Clone 166, Gen 6), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: October 2 20:30:03
Finished date: October 6 18:35:56

Slot 00 *Active   
Project: 6303 (Run 677, Clone 1, Gen 40), Core: 78
Work server: 171.64.65.111:8080
Collection server: 171.67.108.17
Download date: October 6 18:42:54
Deadline date: November 27 18:42:54

PF: 0.545262 based on last 4 slot(s)

Code: Select all

--- Opening Log file [October 21 17:55:27 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[17:55:27] - Ask before connecting: No
[17:55:28] - User name: 48harry48 (Team 67290)
[17:55:28] - User ID: 1F4F9C933BE845BC
[17:55:28] - Machine ID: 3
[17:55:28] 
[17:55:28] Loaded queue successfully.
[17:55:28] Initialization complete
[17:55:38] 
[17:55:38] + Processing work unit
[17:55:38] Core required: FahCore_78.exe
[17:55:38] Core found.
[17:55:43] Working on queue slot 00 [October 21 17:55:43 UTC]
[17:55:43] + Working ...
[17:55:46] 
[17:55:46] *------------------------------*
[17:55:46] Folding@Home Gromacs Core
[17:55:46] Version 1.90 (March 8, 2006)
[17:55:46] 
[17:55:46] Preparing to commence simulation
[17:55:46] - Looking at optimizations...
[17:55:46] - Files status OK
[17:55:47] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[17:55:47] 
[17:55:47] Project: 6303 (Run 677, Clone 1, Gen 40)
[17:55:47] 
[17:55:49] Assembly optimizations on if available.
[17:55:49] Entering M.D.
[17:57:02] (Starting from checkpoint)
[17:57:13] Protein: p6303_sh3_with_SER_frags
[17:57:13] 
[17:57:15] Writing local files
[17:57:35] Completed 342137 out of 500000 steps  (68%)
[17:57:45] Extra SSE boost OK.
[18:48:49] Writing local files
[18:48:49] Completed 345000 out of 500000 steps  (69%)
[20:04:52] Writing local files
[20:04:52] Completed 350000 out of 500000 steps  (70%)
[21:20:11] Writing local files
[21:20:11] Completed 355000 out of 500000 steps  (71%)
[22:12:26] Writing local files
[22:12:26] Completed 360000 out of 500000 steps  (72%)


--- Opening Log file [October 22 18:08:56 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[18:08:56] - Ask before connecting: No
[18:08:57] - User name: 48harry48 (Team 67290)
[18:08:57] - User ID: 1F4F9C933BE845BC
[18:08:57] - Machine ID: 3
[18:08:57] 
[18:08:57] Loaded queue successfully.
[18:08:57] Initialization complete
[18:08:57] 
[18:08:57] + Processing work unit
[18:08:57] Core required: FahCore_78.exe
[18:08:58] Core found.
[18:08:58] Working on queue slot 00 [October 22 18:08:58 UTC]
[18:08:58] + Working ...
[18:08:59] 
[18:08:59] *------------------------------*
[18:08:59] Folding@Home Gromacs Core
[18:08:59] Version 1.90 (March 8, 2006)
[18:08:59] 
[18:08:59] Preparing to commence simulation
[18:08:59] - Looking at optimizations...
[18:08:59] - Files status OK
[18:09:00] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[18:09:00] 
[18:09:00] Project: 6303 (Run 677, Clone 1, Gen 40)
[18:09:00] 
[18:09:04] Assembly optimizations on if available.
[18:09:12] Entering M.D.
[18:10:15] (Starting from checkpoint)
[18:10:21] Protein: p6303_sh3_with_SER_frags
[18:10:21] 
[18:10:26] Writing local files
[18:10:54] Completed 362677 out of 500000 steps  (73%)
[18:10:59] Extra SSE boost OK.
[18:51:08] Writing local files
[18:51:08] Completed 365000 out of 500000 steps  (73%)
[20:12:19] Writing local files
[20:12:19] Completed 370000 out of 500000 steps  (74%)
[21:11:05] Writing local files
[21:11:05] Completed 375000 out of 500000 steps  (75%)
[22:13:37] Writing local files
[22:13:37] Completed 380000 out of 500000 steps  (76%)
[23:21:59] Opening http://fah-web.stanford.edu/cgi-bin/main.py?qtype=teampage&teamnum=67290...


--- Opening Log file [October 23 17:36:42 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[17:36:42] - Ask before connecting: No
[17:36:42] - User name: 48harry48 (Team 67290)
[17:36:42] - User ID: 1F4F9C933BE845BC
[17:36:42] - Machine ID: 3
[17:36:42] 
[17:36:42] Loaded queue successfully.
[17:36:42] Initialization complete
[17:36:43] 
[17:36:43] + Processing work unit
[17:36:43] Core required: FahCore_78.exe
[17:36:43] Core found.
[17:36:44] Working on queue slot 00 [October 23 17:36:44 UTC]
[17:36:44] + Working ...
[17:36:44] 
[17:36:44] *------------------------------*
[17:36:44] Folding@Home Gromacs Core
[17:36:44] Version 1.90 (March 8, 2006)
[17:36:44] 
[17:36:44] Preparing to commence simulation
[17:36:44] - Looking at optimizations...
[17:36:44] - Files status OK
[17:36:45] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[17:36:45] 
[17:36:45] Project: 6303 (Run 677, Clone 1, Gen 40)
[17:36:45] 
[17:36:47] Assembly optimizations on if available.
[17:36:49] Entering M.D.
[17:37:56] (Starting from checkpoint)
[17:38:03] Protein: p6303_sh3_with_SER_frags
[17:38:03] 
[17:38:14] Writing local files
[17:38:36] Completed 382458 out of 500000 steps  (76%)
[17:38:41] Extra SSE boost OK.
[18:07:43] Writing local files
[18:07:43] Completed 385000 out of 500000 steps  (77%)
[19:48:40] Writing local files
[19:48:41] Completed 390000 out of 500000 steps  (78%)
[20:40:44] Writing local files
[20:40:44] Completed 395000 out of 500000 steps  (79%)
[21:29:41] Writing local files
[21:29:41] Completed 400000 out of 500000 steps  (80%)


--- Opening Log file [October 24 11:09:44 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[11:09:44] - Ask before connecting: No
[11:09:44] - User name: 48harry48 (Team 67290)
[11:09:44] - User ID: 1F4F9C933BE845BC
[11:09:44] - Machine ID: 3
[11:09:44] 
[11:09:44] Loaded queue successfully.
[11:09:45] Initialization complete
[11:09:45] 
[11:09:45] + Processing work unit
[11:09:45] Core required: FahCore_78.exe
[11:09:45] Core found.
[11:09:46] Working on queue slot 00 [October 24 11:09:46 UTC]
[11:09:46] + Working ...
[11:09:46] 
[11:09:46] *------------------------------*
[11:09:46] Folding@Home Gromacs Core
[11:09:46] Version 1.90 (March 8, 2006)
[11:09:46] 
[11:09:46] Preparing to commence simulation
[11:09:46] - Looking at optimizations...
[11:09:46] - Files status OK
[11:09:47] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[11:09:48] 
[11:09:48] Project: 6303 (Run 677, Clone 1, Gen 40)
[11:09:48] 
[11:09:48] Assembly optimizations on if available.
[11:09:48] Entering M.D.
[11:10:42] (Starting from checkpoint)
[11:10:53] Protein: p6303_sh3_with_SER_frags
[11:10:53] 
[11:10:53] Writing local files
[11:11:19] Completed 403480 out of 500000 steps  (81%)
[11:11:24] Extra SSE boost OK.
[11:24:44] Opening http://fah-web.stanford.edu/cgi-bin/main.py?qtype=teampage&teamnum=67290...


--- Opening Log file [October 24 14:09:24 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[14:09:24] - Ask before connecting: No
[14:09:24] - User name: 48harry48 (Team 67290)
[14:09:24] - User ID: 1F4F9C933BE845BC
[14:09:24] - Machine ID: 3
[14:09:24] 
[14:09:24] Loaded queue successfully.
[14:09:24] Initialization complete
[14:09:25] 
[14:09:25] + Processing work unit
[14:09:25] Core required: FahCore_78.exe
[14:09:25] Core found.
[14:09:32] Working on queue slot 00 [October 24 14:09:32 UTC]
[14:09:32] + Working ...
[14:09:43] 
[14:09:43] *------------------------------*
[14:09:43] Folding@Home Gromacs Core
[14:09:43] Version 1.90 (March 8, 2006)
[14:09:43] 
[14:09:43] Preparing to commence simulation
[14:09:43] - Looking at optimizations...
[14:09:43] - Files status OK
[14:09:43] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[14:09:44] 
[14:09:44] Project: 6303 (Run 677, Clone 1, Gen 40)
[14:09:44] 
[14:09:44] Assembly optimizations on if available.
[14:09:44] Entering M.D.
[14:10:50] (Starting from checkpoint)
[14:11:00] Protein: p6303_sh3_with_SER_frags
[14:11:00] 
[14:11:08] Writing local files
[14:11:36] Completed 403480 out of 500000 steps  (81%)
[14:11:41] Extra SSE boost OK.
[15:18:37] Writing local files
[15:18:37] Completed 405000 out of 500000 steps  (81%)


--- Opening Log file [October 24 17:21:27 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[17:21:27] - Ask before connecting: No
[17:21:27] - User name: 48harry48 (Team 67290)
[17:21:27] - User ID: 1F4F9C933BE845BC
[17:21:27] - Machine ID: 3
[17:21:27] 


--- Opening Log file [October 24 18:35:51 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[18:35:51] - Ask before connecting: No
[18:35:51] - User name: 48harry48 (Team 67290)
[18:35:51] - User ID: 1F4F9C933BE845BC
[18:35:51] - Machine ID: 3
[18:35:51] 
[18:35:51] Loaded queue successfully.
[18:35:51] Initialization complete
[18:35:51] 
[18:35:51] + Processing work unit
[18:35:51] Core required: FahCore_78.exe
[18:35:51] Core found.
[18:35:51] Working on queue slot 00 [October 24 18:35:51 UTC]
[18:35:51] + Working ...
[18:35:52] 
[18:35:52] *------------------------------*
[18:35:52] Folding@Home Gromacs Core
[18:35:52] Version 1.90 (March 8, 2006)
[18:35:52] 
[18:35:52] Preparing to commence simulation
[18:35:52] - Looking at optimizations...
[18:35:52] - Files status OK
[18:35:54] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[18:35:54] 
[18:35:54] Project: 6303 (Run 677, Clone 1, Gen 40)
[18:35:54] 
[18:35:54] Assembly optimizations on if available.
[18:35:54] Entering M.D.
[18:36:16] (Starting from checkpoint)
[18:36:16] Protein: p6303_sh3_with_SER_frags
[18:36:16] 
[18:36:16] Writing local files
[18:36:16] Completed 405000 out of 500000 steps  (81%)
[18:36:16] Extra SSE boost OK.
[19:45:23] Writing local files
[19:45:23] Completed 410000 out of 500000 steps  (82%)
[21:03:23] Writing local files
[21:03:23] Completed 415000 out of 500000 steps  (83%)
[21:47:21] Writing local files
[21:47:21] Completed 420000 out of 500000 steps  (84%)
[22:31:17] Writing local files
[22:31:17] Completed 425000 out of 500000 steps  (85%)
[23:37:40] Writing local files
[23:37:40] Completed 430000 out of 500000 steps  (86%)


--- Opening Log file [October 25 13:37:50 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[13:37:50] - Ask before connecting: No
[13:37:50] - User name: 48harry48 (Team 67290)
[13:37:50] - User ID: 1F4F9C933BE845BC
[13:37:50] - Machine ID: 3
[13:37:50] 
[13:37:51] Loaded queue successfully.
[13:37:51] Initialization complete
[13:38:01] 
[13:38:01] + Processing work unit
[13:38:01] Core required: FahCore_78.exe
[13:38:01] Core found.
[13:38:06] Working on queue slot 00 [October 25 13:38:06 UTC]
[13:38:06] + Working ...
[13:38:09] 
[13:38:09] *------------------------------*
[13:38:09] Folding@Home Gromacs Core
[13:38:09] Version 1.90 (March 8, 2006)
[13:38:09] 
[13:38:09] Preparing to commence simulation
[13:38:09] - Looking at optimizations...
[13:38:09] - Files status OK
[13:38:10] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[13:38:10] 
[13:38:10] Project: 6303 (Run 677, Clone 1, Gen 40)
[13:38:10] 
[13:38:10] Assembly optimizations on if available.
[13:38:10] Entering M.D.
[13:39:16] (Starting from checkpoint)
[13:39:26] Protein: p6303_sh3_with_SER_frags
[13:39:26] 
[13:39:34] Writing local files
[13:39:56] Completed 430000 out of 500000 steps  (86%)
[13:40:01] Extra SSE boost OK.
[15:57:51] Writing local files
[15:57:52] Completed 435000 out of 500000 steps  (87%)


--- Opening Log file [October 25 16:22:11 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[16:22:11] - Ask before connecting: No
[16:22:11] - User name: 48harry48 (Team 67290)
[16:22:11] - User ID: 1F4F9C933BE845BC
[16:22:11] - Machine ID: 3
[16:22:11] 
[16:22:11] Loaded queue successfully.
[16:22:11] Initialization complete
[16:22:11] 
[16:22:11] + Processing work unit
[16:22:13] Core required: FahCore_78.exe
[16:22:13] Core found.
[16:22:13] Working on queue slot 00 [October 25 16:22:13 UTC]
[16:22:13] + Working ...
[16:22:13] 
[16:22:13] *------------------------------*
[16:22:13] Folding@Home Gromacs Core
[16:22:13] Version 1.90 (March 8, 2006)
[16:22:13] 
[16:22:13] Preparing to commence simulation
[16:22:13] - Ensuring status. Please wait.
[16:22:31] - Looking at optimizations...
[16:22:31] - Working with standard loops on this execution.
[16:22:31] - Previous termination of core was improper.
[16:22:31] - Files status OK
[16:22:32] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[16:22:32] 
[16:22:32] Project: 6303 (Run 677, Clone 1, Gen 40)
[16:22:32] 
[16:22:33] Entering M.D.
[16:23:38] (Starting from checkpoint)
[16:23:49] Protein: p6303_sh3_with_SER_frags
[16:23:49] 
[16:23:58] Writing local files
[16:24:19] Completed 435000 out of 500000 steps  (87%)
[17:34:45] Writing local files
[17:34:45] Completed 440000 out of 500000 steps  (88%)
[18:56:07] Writing local files
[18:56:08] Completed 445000 out of 500000 steps  (89%)
[19:22:06] Opening C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86\MyFolding.html...

Re: please read my logs very slow folding pc

Posted: Sun Oct 25, 2009 9:30 pm
by John_Weatherman
All depends what machine you got. Looks like a CPU around 3 Ghz from the frame times. Give us the info on your machine and somebody will "pass judgement".

The last bit of the log shows an incorrect closedown (or power failure) just reboot correctly to get it going at full speed again. Make sure you see "Extra SSE boost OK" in the log otherwise it will fold very slowly.

Re: please read my logs very slow folding pc

Posted: Sun Oct 25, 2009 10:05 pm
by P5-133XL
You left out one of the most important pieces of data when asking for a performance evaluation and that is the hardware that the folding is being run upon. Different WU's are different sized and thereby can drastically vary how long they take to complete on the same hardware. Also, your machine is not consistently up (which effectively eliminates using the queue data to judge performance) and all your down-time may distort how long you think a specific project takes.

The number of frames (the second number of your 0/500, and 0/2,500) really does not tell anything about how long it will take to complete. If you want a good estimate as to relative performances then the best way is to calculate points per day (PPD) from the amount of time it takes x % to complete.

First, you lookup the amount of points a particular WU is worth at http://fah-web.stanford.edu/psummary.html (this should be proportional to the amount of work needed to finish it). Then look at your log and find out what % (the more % used, the more accurate the final value) was done over how long and then normalize the number to get points per day.

I'll give you an example from your log: Project 6303 (677,1,40).

Looking up the point value for 6303 gives me that it is worth 336 points. Your log states that it started at 68% and stops at 72% and that is 4% done. It took from 17:57:35 till 22:12:26 (or 4 hours, 14 minutes, 51 seconds) to complete that 4% or 254.85 minutes and that corresponds to 63.7125 minutes to complete 1% or 6371.25 minutes to complete 100%. One day is 24hrs which is 24x60=1440 minutes, so it should take 6371.25/1440=4.42 days to complete the WU if you ran continuously and then you would get the 336 points. So you are earning 336 point every 4.42 days (on that specific WU) to get 75.94 points per day. I leave it to you to do the same calculations on your other WU's listed in your log or as an alternative you can install a monitoring program such as FAHMon to automatically do those calculations..

Now I can't tell without knowing your specific hardware if that is relatively normal or slow for your machine. My guess is that you are folding on a 2.8GHz (or lower) P4 which is very low-end hardware for folding now-days. The points system was designed so that a 2.8GHz P4 would get 110 points per day (without using SSE2) but there is enough variation that 76PPD could be in the normal range especially if you are using your machine to do other things at the same time as folding.

I don't want to be presumptuous, but perhaps it would be better if you replaced your machine with something more modern with a folding capable GPU. A modern machine with a moderate folding graphics card can easily do 4000 PPD. It becomes hard to justify folding 24x7 on your old machine, but if you are just using the spare CPU cycles then still everything helps and it costs you very little.

Re: please read my logs very slow folding pc

Posted: Tue Oct 27, 2009 10:10 pm
by harry48
thank you both for your replies , my reply for you both

for john_weatherman , i had to close the pc it frooze , but i do not hit the tower button as i would loose the fold points , turn of the wall plug

what is ( extra sse boost ) and would it help me to fold better

for p5-133xl , the pc is only on for 5/6 hours a day , don't believe in wasting electric

0/500 = 10/20 points per night , 2,500 = 100/120 points per night

pc details below , maybe sent to much , do you see any-thing i could update to fold faster , the pc is 4/5 years of age and working great would add a few things but can't afford to change ( poor pensioner ) :(












Windows XP Home Edition Service Pack 3 (build 2600) Time Computers P4M266-8233
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.40 gigahertz Intel Celeron
16 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: MICRO-STAR INTERNATIONAL CO., LTD P4M266-8233
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/29/2004
Drives Memory Modules c,d
77.44 Gigabytes Usable Hard Drive Capacity
52.54 Gigabytes Hard Drive Free Space

VOM-12E48X [CD-ROM drive]
3.5" format removeable media [Floppy drive]

ST380011A [Hard drive] (77.46 GB) -- drive 0, s/n 3JVCH2EX, rev 8.01, SMART Status: Healthy
Time Computers P4M266-8233
Enclosure Type: Desktop

Board: MICRO-STAR INTERNATIONAL CO., LTD P4M266-8233
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/29/2004


1248 Megabytes Installed Memory

Slot 'A0' has 256 MB
Slot 'A1' has 1024 MB
Slot 'A2' is Empty

S3 Graphics ProSavageDDR [Display adapter]
HSD HG221A [Monitor] (22.3"vis, s/n 852MW3JY11135, December 2008)

Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
VIA Bus Master IDE Controller

VIA Rev 5 or later USB Universal Host Controller (3x)
VIA USB Enhanced Host Controller

Re: please read my logs very slow folding pc

Posted: Tue Oct 27, 2009 11:03 pm
by John_Weatherman
SSE basically is a way to speed up processing - see Wiki for details. Without it working, you're back to prehistoric standards. As long as you close down correctly you will not have any problems.
If I were you I would get a 1024 MB RAM stick (the same as you have now in the machine) to boost it up a bit. Move the 256 MB into the empty slot - waste not! It should n't cost much - the postage will probabley cost more! :) Check out Ebay.
If you want to change out the Celeron too, check Ebay. A 2.8 ghz Pentium 4 would speed things up.

Re: please read my logs very slow folding pc

Posted: Tue Oct 27, 2009 11:21 pm
by harry48
thank you john , would i have to get the same make of stick again or would any one do , would this cost much A 2.8 ghz Pentium 4

Re: please read my logs very slow folding pc

Posted: Tue Oct 27, 2009 11:22 pm
by P5-133XL
Sorry, somehow my long-winded reply got lost, and I don't have time right now to reconstruct it. I'll respond later ...

Re: please read my logs very slow folding pc

Posted: Tue Oct 27, 2009 11:57 pm
by harry48
another problem just started 10 mins ago , see the error near the end of the log below , did i loose my folding and it says i have 6 wu but i have 7

Code: Select all

--- Opening Log file [October 27 18:55:24 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[18:55:24] - Ask before connecting: No
[18:55:24] - User name: 48harry48 (Team 67290)
[18:55:24] - User ID: 1F4F9C933BE845BC
[18:55:24] - Machine ID: 3
[18:55:24] 
[18:55:24] Loaded queue successfully.
[18:55:24] Initialization complete
[18:55:24] 
[18:55:24] + Processing work unit
[18:55:26] Core required: FahCore_78.exe
[18:55:26] Core found.
[18:55:26] Working on queue slot 00 [October 27 18:55:26 UTC]
[18:55:26] + Working ...
[18:55:27] 
[18:55:27] *------------------------------*
[18:55:27] Folding@Home Gromacs Core
[18:55:27] Version 1.90 (March 8, 2006)
[18:55:27] 
[18:55:27] Preparing to commence simulation
[18:55:27] - Looking at optimizations...
[18:55:27] - Files status OK
[18:55:28] - Expanded 456996 -> 2244281 (decompressed 491.0 percent)
[18:55:28] 
[18:55:28] Project: 6303 (Run 677, Clone 1, Gen 40)
[18:55:28] 
[18:55:29] Assembly optimizations on if available.
[18:55:29] Entering M.D.
[18:56:36] (Starting from checkpoint)
[18:56:41] Protein: p6303_sh3_with_SER_frags
[18:56:41] 
[18:56:52] Writing local files
[18:57:20] Completed 475899 out of 500000 steps  (95%)
[18:57:27] Extra SSE boost OK.
[19:45:24] Writing local files
[19:45:25] Completed 480000 out of 500000 steps  (96%)
[20:42:08] Writing local files
[20:42:08] Completed 485000 out of 500000 steps  (97%)
[21:32:45] Writing local files
[21:32:45] Completed 490000 out of 500000 steps  (98%)
[22:29:28] Writing local files
[22:29:28] Completed 495000 out of 500000 steps  (99%)
[23:26:04] Writing local files
[23:26:04] Completed 500000 out of 500000 steps  (100%)
[23:26:04] Writing final coordinates.
[23:26:04] Past main M.D. loop
[23:27:05] 
[23:27:05] Finished Work Unit:
[23:27:05] - Reading up to 362472 from "work/wudata_00.arc": Read 362472
[23:27:05] - Reading up to 3722572 from "work/wudata_00.xtc": Read 3722572
[23:27:05] goefile size: 0
[23:27:05] logfile size: 1251148
[23:27:05] Leaving Run
[23:27:05] - Writing 7200804 bytes of core data to disk...
[23:27:24] Done: 7200292 -> 5008855 (compressed to 69.5 percent)
[23:27:25]   ... Done.
[23:27:25] - Shutting down core
[23:27:25] 
[23:27:25] Folding@home Core Shutdown: FINISHED_UNIT
[23:27:27] CoreStatus = 64 (100)
[23:27:27] Sending work to server
[23:27:27] Project: 6303 (Run 677, Clone 1, Gen 40)


[23:27:27] + Attempting to send results [October 27 23:27:27 UTC]
[23:27:29] - Couldn't send HTTP request to server
[23:27:29] + Could not connect to Work Server (results)
[23:27:29]     (171.64.65.111:8080)
[23:27:29] + Retrying using alternative port
[23:27:31] - Couldn't send HTTP request to server
[23:27:31] + Could not connect to Work Server (results)
[23:27:31]     (171.64.65.111:80)
[23:27:31] - Error: Could not transmit unit 00 (completed October 27) to work server.
[23:27:31]   Keeping unit 00 in queue.
[23:27:31] Project: 6303 (Run 677, Clone 1, Gen 40)


[23:27:31] + Attempting to send results [October 27 23:27:31 UTC]
[23:27:33] - Couldn't send HTTP request to server
[23:27:33] + Could not connect to Work Server (results)
[23:27:33]     (171.64.65.111:8080)
[23:27:33] + Retrying using alternative port
[23:27:34] - Couldn't send HTTP request to server
[23:27:34] + Could not connect to Work Server (results)
[23:27:34]     (171.64.65.111:80)
[23:27:34] - Error: Could not transmit unit 00 (completed October 27) to work server.


[23:27:34] + Attempting to send results [October 27 23:27:34 UTC]
[23:27:35] - Couldn't send HTTP request to server
[23:27:35]   (Got status 503)
[23:27:35] + Could not connect to Work Server (results)
[23:27:35]     (171.67.108.17:8080)
[23:27:35] + Retrying using alternative port
[23:27:35] - Couldn't send HTTP request to server
[23:27:35]   (Got status 503)
[23:27:35] + Could not connect to Work Server (results)
[23:27:35]     (171.67.108.17:80)
[23:27:35]   Could not transmit unit 00 to Collection server; keeping in queue.
[23:27:35] Project: 6303 (Run 677, Clone 1, Gen 40)


[23:27:35] + Attempting to send results [October 27 23:27:35 UTC]
[23:27:37] - Couldn't send HTTP request to server
[23:27:37] + Could not connect to Work Server (results)
[23:27:37]     (171.64.65.111:8080)
[23:27:37] + Retrying using alternative port
[23:27:39] - Couldn't send HTTP request to server
[23:27:39] + Could not connect to Work Server (results)
[23:27:39]     (171.64.65.111:80)
[23:27:39] - Error: Could not transmit unit 00 (completed October 27) to work server.


[23:27:39] + Attempting to send results [October 27 23:27:39 UTC]
[23:27:39] - Couldn't send HTTP request to server
[23:27:39]   (Got status 503)
[23:27:39] + Could not connect to Work Server (results)
[23:27:39]     (171.67.108.17:8080)
[23:27:39] + Retrying using alternative port
[23:27:40] - Couldn't send HTTP request to server
[23:27:40]   (Got status 503)
[23:27:40] + Could not connect to Work Server (results)
[23:27:40]     (171.67.108.17:80)
[23:27:40]   Could not transmit unit 00 to Collection server; keeping in queue.
[23:27:40] - Preparing to get new work unit...
[23:27:40] + Attempting to get work packet
[23:27:40] - Connecting to assignment server
[23:27:41] - Successful: assigned to (169.230.26.30).
[23:27:41] + News From Folding@Home: Welcome to Folding@Home
[23:27:42] Loaded queue successfully.
[23:27:45] Project: 6303 (Run 677, Clone 1, Gen 40)


[23:27:45] + Attempting to send results [October 27 23:27:45 UTC]
[23:27:47] - Couldn't send HTTP request to server
[23:27:47] + Could not connect to Work Server (results)
[23:27:47]     (171.64.65.111:8080)
[23:27:47] + Retrying using alternative port
[23:27:48] - Couldn't send HTTP request to server
[23:27:48] + Could not connect to Work Server (results)
[23:27:48]     (171.64.65.111:80)
[23:27:48] - Error: Could not transmit unit 00 (completed October 27) to work server.


[23:27:48] + Attempting to send results [October 27 23:27:48 UTC]
[23:27:49] - Couldn't send HTTP request to server
[23:27:49]   (Got status 503)
[23:27:49] + Could not connect to Work Server (results)
[23:27:49]     (171.67.108.17:8080)
[23:27:49] + Retrying using alternative port
[23:27:49] - Couldn't send HTTP request to server
[23:27:49]   (Got status 503)
[23:27:49] + Could not connect to Work Server (results)
[23:27:49]     (171.67.108.17:80)
[23:27:49]   Could not transmit unit 00 to Collection server; keeping in queue.
[23:27:49] Project: 6303 (Run 677, Clone 1, Gen 40)


[23:27:49] + Attempting to send results [October 27 23:27:49 UTC]
[23:27:51] - Couldn't send HTTP request to server
[23:27:51] + Could not connect to Work Server (results)
[23:27:51]     (171.64.65.111:8080)
[23:27:51] + Retrying using alternative port
[23:27:53] - Couldn't send HTTP request to server
[23:27:53] + Could not connect to Work Server (results)
[23:27:53]     (171.64.65.111:80)
[23:27:53] - Error: Could not transmit unit 00 (completed October 27) to work server.


[23:27:53] + Attempting to send results [October 27 23:27:53 UTC]
[23:27:53] - Couldn't send HTTP request to server
[23:27:53]   (Got status 503)
[23:27:53] + Could not connect to Work Server (results)
[23:27:53]     (171.67.108.17:8080)
[23:27:53] + Retrying using alternative port
[23:27:54] - Couldn't send HTTP request to server
[23:27:54]   (Got status 503)
[23:27:54] + Could not connect to Work Server (results)
[23:27:54]     (171.67.108.17:80)
[23:27:54]   Could not transmit unit 00 to Collection server; keeping in queue.
[23:27:54] + Closed connections
[23:27:54] 
[23:27:54] + Processing work unit
[23:27:54] Core required: FahCore_82.exe
[23:27:54] Core found.
[23:27:54] Working on queue slot 01 [October 27 23:27:54 UTC]
[23:27:54] + Working ...
[23:27:54] 
[23:27:54] *------------------------------*
[23:27:54] Folding@Home PMD Core
[23:27:54] Version 1.03 (September 7, 2005)
[23:27:54] 
[23:27:54] Preparing to commence simulation
[23:27:54] - Looking at optimizations...
[23:27:54] - Files status OK
[23:27:54] - Expanded 10666 -> 65999 (decompressed 618.7 percent)
[23:27:54] 
[23:27:54] Project: 4613 (Run 20, Clone 27, Gen 87)
[23:27:54] 
[23:27:54] Assembly optimizations on if available.
[23:27:54] Entering M.D.
[23:28:01] 
[23:28:01] Folding@home Core Shutdown: UNKNOWN_ERROR
[23:28:05] CoreStatus = 76 (118)
[23:28:05] Client-core communications error: ERROR 0x76
[23:28:05] This is a sign of more serious problems, shutting down.


--- Opening Log file [October 27 23:37:38 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[23:37:38] - Ask before connecting: No
[23:37:38] - User name: 48harry48 (Team 67290)
[23:37:38] - User ID: 1F4F9C933BE845BC
[23:37:38] - Machine ID: 3
[23:37:38] 
[23:37:39] Loaded queue successfully.
[23:37:39] Initialization complete
[23:37:40] 
[23:37:40] + Processing work unit
[23:37:40] Core required: FahCore_82.exe
[23:37:40] Core found.
[23:37:40] Project: 6303 (Run 677, Clone 1, Gen 40)


[23:37:40] + Attempting to send results [October 27 23:37:40 UTC]
[23:37:40] Working on queue slot 01 [October 27 23:37:40 UTC]
[23:37:40] + Working ...
[23:37:40] 
[23:37:40] *------------------------------*
[23:37:40] Folding@Home PMD Core
[23:37:40] Version 1.03 (September 7, 2005)
[23:37:40] 
[23:37:40] Preparing to commence simulation
[23:37:40] - Looking at optimizations...
[23:37:40] - Created dyn
[23:37:40] - Files status OK
[23:37:40] - Expanded 10666 -> 65999 (decompressed 618.7 percent)
[23:37:40] 
[23:37:40] Project: 4613 (Run 20, Clone 27, Gen 87)
[23:37:40] 
[23:37:40] Assembly optimizations on if available.
[23:37:40] Entering M.D.
[23:37:46] Protein: p4613_T0_BBL-8_minout
[23:37:46] 
[23:37:46] Completed 0 out of 2500000 steps  (0%)
[23:39:42] + Results successfully sent
[23:39:42] Thank you for your contribution to Folding@Home.
[23:39:42] + Number of Units Completed: 6

[23:42:28] Opening http://fah-web.stanford.edu/cgi-bin/main.py?qtype=userpage&username=48harry48...
Edit by Mod: added

Code: Select all

 tags.[/color]

Re: please read my logs very slow folding pc

Posted: Wed Oct 28, 2009 12:01 am
by bruce
harry48 wrote:0/500 = 10/20 points per night , 2,500 = 100/120 points per night
These measurments are not points, they're frames, and there's no dependable logic to say whether 10/20 or 100/120 is more productive. Doing a lot of work on a small protein might be either more or less overall than doing a smaller amount of work on a big protein (assuming, of course, that the results are uploaded after they're completed).

Please locate the project number and the time difference for some percentage of that assignment, as P5-133XL has explained above or install FahMon. (Note that every time you restart your computer, you can't see an accurate PPD until you fold for long enough to see the completion of several percent, whether you calculate it by hand or you use FahMon.)
harry48 wrote:another problem just started 10 mins ago , see the error near the end of the log below , did i loose my folding and it says i have 6 wu but i have 7
I don't know.

I notice that you have completed WUs from two different installations. The 6 WUs have been completed by this client and apparently one has been completed by the other one. This is true whether they're two different PCs but it's also true if you reinstalled FAH on the same PC some time back.

Please note that every WU has a deadline. If you fold 25% of the time (6 hours out of 24) with a relatively slow machine, it's possible for your WU to expire before you complete it. You can find the deadlines on the Project Summary (linked at the top of this page, and mentioned above).

Re: please read my logs very slow folding pc

Posted: Wed Oct 28, 2009 9:24 am
by John_Weatherman
If you want to upgrade the Celeron or add more RAM, you'll need to know the Micro Soft International motherboard number. Quickest way is take off the side panel and have a look - should be something like MSI 645, or 845 or even P4MAM. Go to MSI website here! scroll down to Pentium 4 socket 478 list and your motherboard and all the details should be there. While you're looking for the number you can also check the RAM stick details from the one already in your machine.
If you want, you can download a free system info program like PC Wizard and CPUID to get the info instead.
EDIT add - from a quick look on Ebay a 2.8 Ghz Pentium 4 533 bus goes for about $18

Re: please read my logs very slow folding pc

Posted: Wed Oct 28, 2009 11:01 pm
by bruce
John_Weatherman wrote:While you're looking for the number you can also check the RAM stick details from the one already in your machine.
When I'm working on an unknown machine, I often go to a website for one of the name-brand memory manufacturers such as this one. They generally have a diagnostic which will attempt to determine how many RAM sockets you have and how many are full. Then they tell you what your upgrade options are. If you know your motherboard information, fine, but their scan program is quit frequently able to determine how many RAM sockets you have and how many are full. Then they tell you what your upgrade options are. (You're under no obligation to order your RAM from them.)

Re: please read my logs very slow folding pc

Posted: Fri Oct 30, 2009 11:43 pm
by harry48
thank you all for your help , can i set folding to work on large units 0/2500 as they seem to finish faster

Re: please read my logs very slow folding pc

Posted: Sat Oct 31, 2009 9:23 pm
by harry48
a follow on to my last post , i can not understand how to work out folding , but i have just completed to-night a 0/2500 unit in 3 days , can you spot any thing different in it that would make it work so fast , please read my post above , thank you for your help so far



--- Opening Log file [October 27 23:37:38 UTC]


# Windows CPU Systray Edition #################################################
###############################################################################

Folding@Home Client Version 6.23

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[23:37:38] - Ask before connecting: No
[23:37:38] - User name: 48harry48 (Team 67290)
[23:37:38] - User ID: 1F4F9C933BE845BC
[23:37:38] - Machine ID: 3
[23:37:38]
[23:37:39] Loaded queue successfully.
[23:37:39] Initialization complete
[23:37:40]
[23:37:40] + Processing work unit
[23:37:40] Core required: FahCore_82.exe
[23:37:40] Core found.
[23:37:40] Project: 6303 (Run 677, Clone 1, Gen 40)


[23:37:40] + Attempting to send results [October 27 23:37:40 UTC]
[23:37:40] Working on queue slot 01 [October 27 23:37:40 UTC]
[23:37:40] + Working ...
[23:37:40]
[23:37:40] *------------------------------*
[23:37:40] Folding@Home PMD Core
[23:37:40] Version 1.03 (September 7, 2005)
[23:37:40]
[23:37:40] Preparing to commence simulation
[23:37:40] - Looking at optimizations...
[23:37:40] - Created dyn
[23:37:40] - Files status OK
[23:37:40] - Expanded 10666 -> 65999 (decompressed 618.7 percent)
[23:37:40]
[23:37:40] Project: 4613 (Run 20, Clone 27, Gen 87)
[23:37:40]
[23:37:40] Assembly optimizations on if available.
[23:37:40] Entering M.D.
[23:37:46] Protein: p4613_T0_BBL-8_minout
[23:37:46]
[23:37:46] Completed 0 out of 2500000 steps (0%)
[23:39:42] + Results successfully sent
[23:39:42] Thank you for your contribution to Folding@Home.
[23:39:42] + Number of Units Completed: 6

[23:42:28] Opening http://fah-web.stanford.edu/cgi-bin/mai ... 8harry48...
[23:44:06] Writing local files
[23:44:06] Completed 25000 out of 2500000 steps (1%)
[23:49:40] Writing local files
[23:49:40] Completed 50000 out of 2500000 steps (2%)
[23:49:40] Writing checkpoint files
[00:14:37] Writing local files
[00:14:38] Completed 75000 out of 2500000 steps (3%)
[00:19:50] Writing checkpoint files


--- Opening Log file [October 30 18:39:58 UTC]


# Windows CPU Systray Edition #################################################
###############################################################################

Folding@Home Client Version 6.23

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[18:39:58] - Ask before connecting: No
[18:39:59] - User name: 48harry48 (Team 67290)
[18:39:59] - User ID: 1F4F9C933BE845BC
[18:39:59] - Machine ID: 3
[18:39:59]
[18:39:59] Loaded queue successfully.
[18:39:59] Initialization complete
[18:40:01]
[18:40:01] + Processing work unit
[18:40:01] Core required: FahCore_82.exe
[18:40:01] Core found.
[18:40:01] Working on queue slot 01 [October 30 18:40:01 UTC]
[18:40:01] + Working ...
[18:40:02]
[18:40:02] *------------------------------*
[18:40:02] Folding@Home PMD Core
[18:40:02] Version 1.03 (September 7, 2005)
[18:40:02]
[18:40:02] Preparing to commence simulation
[18:40:02] - Looking at optimizations...
[18:40:02] - Files status OK
[18:40:02] - Expanded 10666 -> 65999 (decompressed 618.7 percent)
[18:40:03]
[18:40:03] Project: 4613 (Run 20, Clone 27, Gen 87)
[18:40:03]
[18:40:03] Assembly optimizations on if available.
[18:40:03] Entering M.D.
[18:43:05] Protein: p4613_T0_BBL-8_minout
[18:43:05]
[18:43:05] Completed 75425 out of 2500000 steps (3%)
[18:52:13] Writing local files
[18:52:13] Completed 100000 out of 2500000 steps (4%)
[18:52:13] Writing checkpoint files
[19:05:23] Writing local files
[19:05:23] Completed 125000 out of 2500000 steps (5%)
[19:08:20] Opening http://fah-web.stanford.edu/cgi-bin/mai ... um=67290...
[19:16:02] Writing local files
[19:16:02] Completed 150000 out of 2500000 steps (6%)
[19:16:02] Writing checkpoint files
[19:24:18] Writing local files
[19:24:18] Completed 175000 out of 2500000 steps (7%)
[19:31:37] Writing local files
[19:31:37] Completed 200000 out of 2500000 steps (8%)
[19:31:37] Writing checkpoint files
[19:45:04] Writing local files
[19:45:04] Completed 225000 out of 2500000 steps (9%)
[19:53:30] Writing local files
[19:53:30] Completed 250000 out of 2500000 steps (10%)
[19:53:30] Writing checkpoint files
[20:02:41] Opening http://fah-web.stanford.edu/cgi-bin/mai ... um=67290...
[20:08:40] Writing local files
[20:08:40] Completed 275000 out of 2500000 steps (11%)
[20:16:55] Writing local files
[20:16:55] Completed 300000 out of 2500000 steps (12%)
[20:16:55] Writing checkpoint files
[20:22:43] Writing local files
[20:22:43] Completed 325000 out of 2500000 steps (13%)
[20:28:00] Writing local files
[20:28:00] Completed 350000 out of 2500000 steps (14%)
[20:28:00] Writing checkpoint files
[20:34:28] Writing local files
[20:34:28] Completed 375000 out of 2500000 steps (15%)
[20:41:33] Writing local files
[20:41:33] Completed 400000 out of 2500000 steps (16%)
[20:41:33] Writing checkpoint files
[20:59:18] Writing local files
[20:59:18] Completed 425000 out of 2500000 steps (17%)
[21:05:44] Writing local files
[21:05:44] Completed 450000 out of 2500000 steps (18%)
[21:05:44] Writing checkpoint files
[21:12:09] Writing local files
[21:12:09] Completed 475000 out of 2500000 steps (19%)
[21:35:50] Writing checkpoint files
[21:41:23] Writing local files
[21:41:23] Completed 500000 out of 2500000 steps (20%)
[21:41:23] Writing checkpoint files
[21:51:52] Writing local files
[21:51:52] Completed 525000 out of 2500000 steps (21%)
[21:59:05] Writing local files
[21:59:05] Completed 550000 out of 2500000 steps (22%)
[21:59:05] Writing checkpoint files
[22:10:48] Writing local files
[22:10:48] Completed 575000 out of 2500000 steps (23%)
[22:16:42] Writing local files
[22:16:42] Completed 600000 out of 2500000 steps (24%)
[22:16:42] Writing checkpoint files
[22:22:34] Writing local files
[22:22:34] Completed 625000 out of 2500000 steps (25%)
[22:28:30] Writing local files
[22:28:30] Completed 650000 out of 2500000 steps (26%)
[22:28:30] Writing checkpoint files
[22:34:27] Writing local files
[22:34:27] Completed 675000 out of 2500000 steps (27%)
[22:40:19] Writing local files
[22:40:19] Completed 700000 out of 2500000 steps (28%)
[22:40:19] Writing checkpoint files
[23:00:39] Writing local files
[23:00:39] Completed 725000 out of 2500000 steps (29%)
[23:08:20] Writing local files
[23:08:20] Completed 750000 out of 2500000 steps (30%)
[23:08:21] Writing checkpoint files
[23:35:52] Writing local files
[23:35:52] Completed 775000 out of 2500000 steps (31%)
[23:38:20] Writing checkpoint files
[23:39:46] Writing local files
[23:39:46] Completed 800000 out of 2500000 steps (32%)
[23:39:46] Writing checkpoint files
[23:46:33] Writing local files
[23:46:33] Completed 825000 out of 2500000 steps (33%)
[23:54:52] Writing local files
[23:54:52] Completed 850000 out of 2500000 steps (34%)
[23:54:52] Writing checkpoint files
[00:07:09] Writing local files
[00:07:09] Completed 875000 out of 2500000 steps (35%)
[00:16:33] Writing local files
[00:16:33] Completed 900000 out of 2500000 steps (36%)
[00:16:33] Writing checkpoint files
[00:29:50] Writing local files
[00:29:50] Completed 925000 out of 2500000 steps (37%)


--- Opening Log file [October 31 15:32:38 UTC]


# Windows CPU Systray Edition #################################################
###############################################################################

Folding@Home Client Version 6.23

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\harold mullan\Application Data\Folding@home-x86


[15:32:39] - Ask before connecting: No
[15:32:39] - User name: 48harry48 (Team 67290)
[15:32:39] - User ID: 1F4F9C933BE845BC
[15:32:39] - Machine ID: 3
[15:32:39]
[15:32:39] Loaded queue successfully.
[15:32:39] Initialization complete
[15:32:39]
[15:32:39] + Processing work unit
[15:32:40] Core required: FahCore_82.exe
[15:32:40] Core found.
[15:32:42] Working on queue slot 01 [October 31 15:32:42 UTC]
[15:32:42] + Working ...
[15:32:43]
[15:32:43] *------------------------------*
[15:32:43] Folding@Home PMD Core
[15:32:43] Version 1.03 (September 7, 2005)
[15:32:43]
[15:32:43] Preparing to commence simulation
[15:32:43] - Looking at optimizations...
[15:32:43] - Files status OK
[15:32:43] - Expanded 10666 -> 65999 (decompressed 618.7 percent)
[15:32:43]
[15:32:43] Project: 4613 (Run 20, Clone 27, Gen 87)
[15:32:43]
[15:32:43] Assembly optimizations on if available.
[15:32:43] Entering M.D.
[15:36:53] Protein: p4613_T0_BBL-8_minout
[15:36:53]
[15:36:53] Completed 900000 out of 2500000 steps (36%)
[15:41:45] Writing local files
[15:41:45] Completed 925000 out of 2500000 steps (37%)
[15:47:13] Writing local files
[15:47:13] Completed 950000 out of 2500000 steps (38%)
[15:47:13] Writing checkpoint files
[15:52:15] Writing local files
[15:52:15] Completed 975000 out of 2500000 steps (39%)
[15:56:10] Writing local files
[15:56:10] Completed 1000000 out of 2500000 steps (40%)
[15:56:10] Writing checkpoint files
[16:00:04] Writing local files
[16:00:04] Completed 1025000 out of 2500000 steps (41%)
[16:04:24] Writing local files
[16:04:24] Completed 1050000 out of 2500000 steps (42%)
[16:04:24] Writing checkpoint files
[16:08:17] Writing local files
[16:08:17] Completed 1075000 out of 2500000 steps (43%)
[16:12:11] Writing local files
[16:12:11] Completed 1100000 out of 2500000 steps (44%)
[16:12:11] Writing checkpoint files
[16:16:05] Writing local files
[16:16:05] Completed 1125000 out of 2500000 steps (45%)
[16:20:59] Writing local files
[16:20:59] Completed 1150000 out of 2500000 steps (46%)
[16:20:59] Writing checkpoint files
[16:25:49] Opening http://fah-web.stanford.edu/cgi-bin/mai ... um=67290...
[16:27:44] Writing local files
[16:27:44] Completed 1175000 out of 2500000 steps (47%)
[16:33:20] Writing local files
[16:33:20] Completed 1200000 out of 2500000 steps (48%)
[16:33:20] Writing checkpoint files
[16:37:30] Writing local files
[16:37:30] Completed 1225000 out of 2500000 steps (49%)
[16:41:37] Writing local files
[16:41:37] Completed 1250000 out of 2500000 steps (50%)
[16:41:37] Writing checkpoint files
[16:45:43] Writing local files
[16:45:43] Completed 1275000 out of 2500000 steps (51%)
[16:49:50] Writing local files
[16:49:50] Completed 1300000 out of 2500000 steps (52%)
[16:49:50] Writing checkpoint files
[16:53:58] Writing local files
[16:53:58] Completed 1325000 out of 2500000 steps (53%)
[16:58:06] Writing local files
[16:58:06] Completed 1350000 out of 2500000 steps (54%)
[16:58:06] Writing checkpoint files
[17:02:10] Writing local files
[17:02:10] Completed 1375000 out of 2500000 steps (55%)
[17:06:16] Writing local files
[17:06:16] Completed 1400000 out of 2500000 steps (56%)
[17:06:16] Writing checkpoint files
[17:10:18] Writing local files
[17:10:18] Completed 1425000 out of 2500000 steps (57%)
[17:14:18] Writing local files
[17:14:18] Completed 1450000 out of 2500000 steps (58%)
[17:14:18] Writing checkpoint files
[17:18:25] Writing local files
[17:18:25] Completed 1475000 out of 2500000 steps (59%)
[17:22:29] Writing local files
[17:22:29] Completed 1500000 out of 2500000 steps (60%)
[17:22:29] Writing checkpoint files
[17:26:27] Writing local files
[17:26:27] Completed 1525000 out of 2500000 steps (61%)
[17:30:32] Writing local files
[17:30:32] Completed 1550000 out of 2500000 steps (62%)
[17:30:32] Writing checkpoint files
[17:34:40] Writing local files
[17:34:40] Completed 1575000 out of 2500000 steps (63%)
[17:38:48] Writing local files
[17:38:48] Completed 1600000 out of 2500000 steps (64%)
[17:38:48] Writing checkpoint files
[17:42:54] Writing local files
[17:42:54] Completed 1625000 out of 2500000 steps (65%)
[17:46:51] Writing local files
[17:46:51] Completed 1650000 out of 2500000 steps (66%)
[17:46:51] Writing checkpoint files
[17:50:47] Writing local files
[17:50:47] Completed 1675000 out of 2500000 steps (67%)
[17:54:47] Writing local files
[17:54:47] Completed 1700000 out of 2500000 steps (68%)
[17:54:47] Writing checkpoint files
[17:58:53] Writing local files
[17:58:53] Completed 1725000 out of 2500000 steps (69%)
[18:03:51] Writing local files
[18:03:51] Completed 1750000 out of 2500000 steps (70%)
[18:03:51] Writing checkpoint files
[18:08:24] Writing local files
[18:08:24] Completed 1775000 out of 2500000 steps (71%)
[18:18:42] Writing local files
[18:18:42] Completed 1800000 out of 2500000 steps (72%)
[18:18:42] Writing checkpoint files
[18:24:18] Writing local files
[18:24:18] Completed 1825000 out of 2500000 steps (73%)
[18:29:54] Writing local files
[18:29:54] Completed 1850000 out of 2500000 steps (74%)
[18:29:54] Writing checkpoint files
[18:35:27] Writing local files
[18:35:27] Completed 1875000 out of 2500000 steps (75%)
[18:41:05] Writing local files
[18:41:05] Completed 1900000 out of 2500000 steps (76%)
[18:41:05] Writing checkpoint files
[18:46:42] Writing local files
[18:46:42] Completed 1925000 out of 2500000 steps (77%)
[18:52:54] Writing local files
[18:52:54] Completed 1950000 out of 2500000 steps (78%)
[18:52:54] Writing checkpoint files
[19:00:54] Writing local files
[19:00:54] Completed 1975000 out of 2500000 steps (79%)
[19:05:32] Writing local files
[19:05:32] Completed 2000000 out of 2500000 steps (80%)
[19:05:32] Writing checkpoint files
[19:09:46] Writing local files
[19:09:46] Completed 2025000 out of 2500000 steps (81%)
[19:13:53] Writing local files
[19:13:53] Completed 2050000 out of 2500000 steps (82%)
[19:13:53] Writing checkpoint files
[19:18:00] Writing local files
[19:18:00] Completed 2075000 out of 2500000 steps (83%)
[19:44:03] Writing checkpoint files
[19:54:06] Writing local files
[19:54:06] Completed 2100000 out of 2500000 steps (84%)
[19:54:06] Writing checkpoint files
[19:59:00] Writing local files
[19:59:00] Completed 2125000 out of 2500000 steps (85%)
[20:04:41] Writing local files
[20:04:41] Completed 2150000 out of 2500000 steps (86%)
[20:04:41] Writing checkpoint files
[20:09:18] Writing local files
[20:09:18] Completed 2175000 out of 2500000 steps (87%)
[20:13:21] Writing local files
[20:13:21] Completed 2200000 out of 2500000 steps (88%)
[20:13:21] Writing checkpoint files
[20:17:30] Writing local files
[20:17:30] Completed 2225000 out of 2500000 steps (89%)
[20:24:25] Writing local files
[20:24:25] Completed 2250000 out of 2500000 steps (90%)
[20:24:25] Writing checkpoint files
[20:29:26] Writing local files
[20:29:26] Completed 2275000 out of 2500000 steps (91%)
[20:33:33] Writing local files
[20:33:33] Completed 2300000 out of 2500000 steps (92%)
[20:33:33] Writing checkpoint files
[20:37:42] Writing local files
[20:37:42] Completed 2325000 out of 2500000 steps (93%)
[20:41:49] Writing local files
[20:41:49] Completed 2350000 out of 2500000 steps (94%)
[20:41:49] Writing checkpoint files
[20:47:47] Writing local files
[20:47:47] Completed 2375000 out of 2500000 steps (95%)
[20:52:41] Writing local files
[20:52:41] Completed 2400000 out of 2500000 steps (96%)
[20:52:41] Writing checkpoint files
[20:57:16] Writing local files
[20:57:16] Completed 2425000 out of 2500000 steps (97%)
[21:01:14] Writing local files
[21:01:14] Completed 2450000 out of 2500000 steps (98%)
[21:01:14] Writing checkpoint files
[21:05:43] Writing local files
[21:05:43] Completed 2475000 out of 2500000 steps (99%)
[21:10:48] Writing local files
[21:10:48] Completed 2500000 out of 2500000 steps (100%)
[21:10:48] Writing checkpoint files
[21:11:48]
[21:11:48] Finished Work Unit:
[21:11:48] Leaving Run
[21:11:49] - Writing 202367 bytes of core data to disk...
[21:11:49] ... Done.
[21:11:49] - Shutting down core
[21:11:49]
[21:11:49] Folding@home Core Shutdown: FINISHED_UNIT
[21:11:52] CoreStatus = 64 (100)
[21:11:52] Sending work to server
[21:11:52] Project: 4613 (Run 20, Clone 27, Gen 87)


[21:11:52] + Attempting to send results [October 31 21:11:52 UTC]
[21:11:58] + Results successfully sent
[21:11:58] Thank you for your contribution to Folding@Home.
[21:11:58] + Number of Units Completed: 7

[21:12:02] - Preparing to get new work unit...
[21:12:02] + Attempting to get work packet
[21:12:02] - Connecting to assignment server
[21:12:04] - Successful: assigned to (134.139.127.31).
[21:12:04] + News From Folding@Home: Welcome to Folding@Home
[21:12:04] Loaded queue successfully.
[21:12:45] + Closed connections
[21:12:45]
[21:12:45] + Processing work unit
[21:12:45] Core required: FahCore_a0.exe
[21:12:45] Core found.
[21:12:45] Working on queue slot 02 [October 31 21:12:45 UTC]
[21:12:45] + Working ...
[21:12:45]
[21:12:45] *------------------------------*
[21:12:45] Folding@Home Gromacs 3.3 Core
[21:12:45] Version 1.93 (July 23, 2008)
[21:12:45]
[21:12:45] Preparing to commence simulation
[21:12:45] - Looking at optimizations...
[21:12:46] - Previous termination of core was improper.
[21:12:46] - Files status OK
[21:13:00] - Expanded 2872182 -> 15076889 (decompressed 524.9 percent)
[21:13:00] - Starting from initial work packet
[21:13:00]
[21:13:00] Project: 1741 (Run 6, Clone 63, Gen 8)
[21:13:00]
[21:13:01] Entering M.D.
[21:13:07] Rejecting checkpoint
[21:13:11] Protein: solvate output: 19 Na ions added to 1P0I.gro with min_sep 0.5 in water
[21:13:11] Writing local files
[21:13:24] Opening http://fah-web.stanford.edu/cgi-bin/mai ... um=67290...
[21:13:42] Writing local files
[21:13:42] Completed 0 out of 500000 steps (0 percent)

Re: please read my logs very slow folding pc

Posted: Sun Nov 01, 2009 9:25 pm
by bruce
harry48 wrote:thank you all for your help , can i set folding to work on large units 0/2500 as they seem to finish faster
I think you've missed the point. Please re-read viewtopic.php?f=16&t=11962&p=117051#p116704

1) You can't choose which WU are assigned to you.
2) It's not about how fast you finish a lot of short WUs compared to longer WUs, it's about how many points the WU is assigned when it's benchmarked.
3) The 0/2500 is not a good description of the WUs. Please use the project number and the data for that project that you'll find in the Project Summary.

Re: please read my logs very slow folding pc

Posted: Sun Nov 01, 2009 10:02 pm
by John_Weatherman
This is the best way to describe what you're working on (for example the one you're working on now is) : Project: 1741 (Run 6, Clone 63, Gen 8). It's printed in the log file every time you start Folding. Each project has lots of work units and each work unit has it's own run, clone and gen number. These are what's needed to check up on.
Unfortunately, as Bruce wrote, we can not get to pick and choose what work comes from Stanford. As your machine will do the work before any deadlines expire, you've no need to panic. Some work units can take a week to do, even with the machine on 24 hours a day, but as they can have a deadline of 40 days that's not a problem.
Just make sure you get the message about SSE working or Assembly optimizations on if available and you'll be ok.
All times are UTC
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited