Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 18, 2008 3:53 am
Thanx a whole bunch Pau.... God Bless.
Peace
Peace
Folding Forum
Community driven support forum for Folding@home
https://foldingforum.org/
171.64.65.56 not responding
Page 7 of 25
Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 18, 2008 4:13 am
We reduced the load (analysis and compression was running). That should help.
Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 18, 2008 4:18 am
It's working on our side--I'm watching work units come in and go out.
Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 18, 2008 8:53 am
I just tried the -send all flag ... no success....
going to bed now, will try again in the morning.
Thanx Pau, V.P. and kasson...
Peace
going to bed now, will try again in the morning.
Thanx Pau, V.P. and kasson...
Peace
Re: 171.64.65.56 is in Reject status
Posted: Thu Nov 20, 2008 3:22 am
[03:04:28] - Connecting to assignment server
[03:04:28] (Read 26003575 bytes from disk)
[03:04:28] Connecting to http://assign.stanford.edu:8080/
[03:04:28] Connecting to http://171.64.65.56:8080/
[03:04:28] - Couldn't send HTTP request to server
[03:04:28] + Could not connect to Work Server (results)
[03:04:28] (171.64.65.56:8080)
[03:04:28] + Retrying using alternative port
[03:04:28] Connecting to http://171.64.65.56:80/
[03:04:28] - Couldn't send HTTP request to server
[03:04:28] + Could not connect to Work Server (results)
[03:04:28] (171.64.65.56:80)
[03:04:28] - Error: Could not transmit unit 07 (completed November 20) to work server.
[03:04:28] - 1 failed uploads of this unit.
[03:04:28] (Read 26003575 bytes from disk)
[03:04:28] Connecting to http://assign.stanford.edu:8080/
[03:04:28] Connecting to http://171.64.65.56:8080/
[03:04:28] - Couldn't send HTTP request to server
[03:04:28] + Could not connect to Work Server (results)
[03:04:28] (171.64.65.56:8080)
[03:04:28] + Retrying using alternative port
[03:04:28] Connecting to http://171.64.65.56:80/
[03:04:28] - Couldn't send HTTP request to server
[03:04:28] + Could not connect to Work Server (results)
[03:04:28] (171.64.65.56:80)
[03:04:28] - Error: Could not transmit unit 07 (completed November 20) to work server.
[03:04:28] - 1 failed uploads of this unit.
Re: 171.64.65.56 is in Reject status
Posted: Thu Nov 20, 2008 3:39 am
ah.... just when I thought all was good with this server!!! ... down again 
Peace
Peace
Re: 171.64.65.56 is in Reject status
Posted: Thu Nov 20, 2008 4:26 am
All three servers I reported tonite are now working, including this one.... <keeping fingers crossed>
Peace
Peace
Re: 171.64.65.56 is in Reject status
Posted: Mon Nov 24, 2008 1:50 pm
Code: Select all
Mon Nov 24 05:40:20 PST 2008 171.64.65.56 SMP vspg4 kasson full Reject 6.80 53 1 17883 1549 1 2.12 381 381Re: 171.64.65.56 is in Reject status
Posted: Mon Nov 24, 2008 3:32 pm
Server restarted; it should be working shortly.
Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 25, 2008 11:16 am
I have been having both WU upload and download problems.
My little G4 iBook is gasping for work but can not get it.
I see the 171.64.65.65 server is rejecting at this time.
NB My last WU from this machine tried for about 3 days to upload its result, but it least I was folding.
John
My little G4 iBook is gasping for work but can not get it.
I see the 171.64.65.65 server is rejecting at this time.
NB My last WU from this machine tried for about 3 days to upload its result, but it least I was folding.
John
Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 25, 2008 1:52 pm
Please note that my problem (see above) is with server 171.64.65.65.
I am being successfully assigned and then "Got status 503".
John
I am being successfully assigned and then "Got status 503".
John
Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 25, 2008 4:03 pm
Please keep posts separated by server. This thread is server .56, not .65. .56 is working and a G4 iBook would not be assigned to it in any case. .65 is a different server and is doing the best it can to serve its clients but is near max load.
Re: 171.64.65.56 is in Reject status
Posted: Tue Nov 25, 2008 5:03 pm
A quick check would have shown that I have indeed posted in the 171.64.65.65 thread.kasson wrote:Please keep posts separated by server. This thread is server .56, not .65. .56 is working and a G4 iBook would not be assigned to it in any case. .65 is a different server and is doing the best it can to serve its clients but is near max load.
I was url'ed to the "wrong" thread from here:
Code: Select all
Re: Issues with 171.64.65.56
by Xilikon on Mon Nov 17, 2008 3:38 pm
Post in viewtopic.php?f=18&t=5750 since it's about this server. The last few posts is from today.John
Re: 171.64.65.56 is in Reject status
Posted: Thu Nov 27, 2008 3:02 am
I'm having a problem with 171.64.65.56
The server status page reports the sever as in "Not accepting" mode, whatever that means...
Code: Select all
[02:56:34] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[02:56:34] + News From Folding@Home: Welcome to Folding@Home
[02:56:34] Loaded queue successfully.
[02:56:34] Connecting to http://171.64.65.56:8080/
[02:56:34] - Couldn't send HTTP request to server
[02:56:34] (Got status 503)
[02:56:34] + Could not connect to Work ServerRe: 171.64.65.56 is in Reject status
Posted: Thu Nov 27, 2008 3:11 am
Hmm--I'm seeing vspg3 in "Not accept" but vspg4 in "Accepting." It's receiving and assigning work units right now, but the # of simultaneous transactions is maxed out. Let us know if it doesn't improve.