Total work not showing up
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 23
- Joined: Thu Feb 13, 2025 3:10 am
- Hardware configuration: Lenovo Win 11 desktop
- Location: NJ, USA
- Contact:
Re: Total work not showing up
I do not think that I ever set up a pass key when I was originally running Version 7.
-
- Posts: 1456
- Joined: Sun Dec 16, 2007 6:22 pm
- Hardware configuration: 9950x, 7950x3D, 5950x, 5800x3D
7900xtx, RX9070, Radeon 7, 5700xt, 6900xt, RX 550 640SP - Location: London
- Contact:
Re: Total work not showing up
passkey is just for people who count every point they earn. If you didn't have it, you don't really need it.Richard Mitnick wrote: ↑Tue Feb 18, 2025 7:57 pm I do not think that I ever set up a pass key when I was originally running Version 7.
-
- Posts: 23
- Joined: Thu Feb 13, 2025 3:10 am
- Hardware configuration: Lenovo Win 11 desktop
- Location: NJ, USA
- Contact:
Re: Total work not showing up
Thanks. That is what I thought.
I do have a question. I have gone back to Version 7 because I could not satisfy the requirements for Version 8 due to my own limitations. In Version 7, I do not see that I am using my GPU, just 15 CPU's. Should I not also see usage of my GPU?
Thanks.
I do have a question. I have gone back to Version 7 because I could not satisfy the requirements for Version 8 due to my own limitations. In Version 7, I do not see that I am using my GPU, just 15 CPU's. Should I not also see usage of my GPU?
Thanks.
-
- Posts: 23
- Joined: Thu Feb 13, 2025 3:10 am
- Hardware configuration: Lenovo Win 11 desktop
- Location: NJ, USA
- Contact:
Re: Total work not showing up
I think I just found the problem for my installation of Version 8. The email I was to get to confirm my email address went into my Junk file, something which has never ever previously occurred and I never looked there for it. So, I would like to again try in install Version 8.
Version 7 is running in a very satisfactory way. If I try to install Version 8, do I need to remove Version 7 or can I keep it?
Would version 8 use my GPU?
Would Version 8 do anything in processing that is an advantage over Version 7?
With BOINC, we were advised not to run on a laptop or tablet because of heat and possible damage to the CPU. Can FAH run on a laptop with no danger of damage? I have two laptops available.
Thanks.
Version 7 is running in a very satisfactory way. If I try to install Version 8, do I need to remove Version 7 or can I keep it?
Would version 8 use my GPU?
Would Version 8 do anything in processing that is an advantage over Version 7?
With BOINC, we were advised not to run on a laptop or tablet because of heat and possible damage to the CPU. Can FAH run on a laptop with no danger of damage? I have two laptops available.
Thanks.
-
- Posts: 1456
- Joined: Sun Dec 16, 2007 6:22 pm
- Hardware configuration: 9950x, 7950x3D, 5950x, 5800x3D
7900xtx, RX9070, Radeon 7, 5700xt, 6900xt, RX 550 640SP - Location: London
- Contact:
Re: Total work not showing up
V8 will replace V7 for you.
V8 does everything v7 does (and more) just in a different UI.
Running any high intensity workload on laptops or handheld devices is as risky as a user running on it can allow. Monitoring system temperatures is vital in every high compute tasks. Well maintained system can fold and do other things for many years
V8 does everything v7 does (and more) just in a different UI.
Running any high intensity workload on laptops or handheld devices is as risky as a user running on it can allow. Monitoring system temperatures is vital in every high compute tasks. Well maintained system can fold and do other things for many years
-
- Site Moderator
- Posts: 1412
- Joined: Sat Dec 08, 2007 1:33 am
- Location: San Francisco, CA
- Contact:
Re: Total work not showing up
V8 will not adopt unfinished v7 work.
Please finish and pause before upgrading.
Please finish and pause before upgrading.
-
- Site Admin
- Posts: 8078
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Studio M1 Max 32 GB smp6
Mac Hack i7-7700K 48 GB smp4 - Location: W. MA
Re: Total work not showing up
You do not need to remove the v7 client. Just set any WUs to Finish and install after they finish and upload. Unfortunately the install of v8 will not continue WUs downloaded by the v7 client. Many settings such as username and passkey will be imported from the v7 config.xml file, but not all.
v8 should use your GPU if the full video drivers from AMD or Nvidia are installed and the GPU is supported by F@h. The drivers that MS installs using Windows Update usually do not include OpenCL or CUDA support which is required for folding.
Folding can work on a laptop if it has a well cooled design. You can partly control the heat by using fewer CPU cores. I do know that I ran folding for over half a dozen years on my previous MacBook Pro without problems. Though now that it is over 8 years old I do need to replace the cooling fan and possibly the thermal paste between the CPU and heat sink.
v8 should use your GPU if the full video drivers from AMD or Nvidia are installed and the GPU is supported by F@h. The drivers that MS installs using Windows Update usually do not include OpenCL or CUDA support which is required for folding.
Folding can work on a laptop if it has a well cooled design. You can partly control the heat by using fewer CPU cores. I do know that I ran folding for over half a dozen years on my previous MacBook Pro without problems. Though now that it is over 8 years old I do need to replace the cooling fan and possibly the thermal paste between the CPU and heat sink.
-
- Site Moderator
- Posts: 1412
- Joined: Sat Dec 08, 2007 1:33 am
- Location: San Francisco, CA
- Contact:
Re: Total work not showing up
I would think the fans and battery are the weakest points for a laptop folding.
-
- Site Moderator
- Posts: 1412
- Joined: Sat Dec 08, 2007 1:33 am
- Location: San Francisco, CA
- Contact:
Re: Total work not showing up
Long ago I had a PowerBook g4 plugged in and folding most of the time. It was on a cooling stand but I don’t think the battery was happy plugged in at 100% so much.
-
- Site Admin
- Posts: 8078
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Studio M1 Max 32 GB smp6
Mac Hack i7-7700K 48 GB smp4 - Location: W. MA
Re: Total work not showing up
Current model MacBooks can go into a desktop mode where they leave the battery at an 80% charge. That stresses the battery less. But cooler is better.
-
- Posts: 23
- Joined: Thu Feb 13, 2025 3:10 am
- Hardware configuration: Lenovo Win 11 desktop
- Location: NJ, USA
- Contact:
Re: Total work not showing up
I ran the install for Version 8 and got as far as "Verify your email address", which did not tell me that an email would be coming for me to verify my email address and I have not gotten the email requesting me to do the verification, so I cannot finish the setup. Will the email come? If so, how long should I have to wait for it.
-
- Site Moderator
- Posts: 1412
- Joined: Sat Dec 08, 2007 1:33 am
- Location: San Francisco, CA
- Contact:
Re: Total work not showing up
It should come within a couple minutes.
Some email providers block it.
I use a gmail address.
Some email providers block it.
I use a gmail address.
-
- Site Moderator
- Posts: 1412
- Joined: Sat Dec 08, 2007 1:33 am
- Location: San Francisco, CA
- Contact:
Re: Total work not showing up
An account is optional.
-
- Posts: 23
- Joined: Thu Feb 13, 2025 3:10 am
- Hardware configuration: Lenovo Win 11 desktop
- Location: NJ, USA
- Contact:
Re: Total work not showing up
It has been over 1 hour, no email to confirm my email address. I am just going to go back to Version 7 which does not have all of this.
-
- Posts: 23
- Joined: Thu Feb 13, 2025 3:10 am
- Hardware configuration: Lenovo Win 11 desktop
- Location: NJ, USA
- Contact:
Re: Total work not showing up
So I went back to Version 7 and it started to work immediately. I did put in my identity. No muss, no fuss. That is how it should be.