KroontjesPen wrote:Last night, local time, lot of work is successfully accepted.
Only this combination of servers didn't the job.
For information I put here lot of data from my log file.
The PC is still in pause but I take the chance to go on work here and maybe lose:
Slot 07 Done
Project: 6314 (Run 392, Clone 19, Gen 13), Core: 78
Work server: 171.64.65.111:8080
Collection server: 171.67.108.17
Download date: April 2 11:00:27
Finished date: April 3 02:33:59
Failed uploads: 6
We shall see.
The moderators can correct me, but if you're worried about losing a completed WU b/c it gets over written, my understanding is that the program knows to skip occupied slots.
Your are right here. Slot 7 is still waiting to be uploaded. Failed uploads is now 10.
Due to an other problem I am pretty sure that I have lost one project.
Baowoulf wrote:Well I'm in the same predictment now lol. 2 WU's finish(which 1 has been waiting for a couple of days) and can't send too 171.64.65.111 and couldn't get any work for a while. I just got a WU a couple mins ago.
Which server did you get an assignment from? 171.67.108.17 is a collection server, so it shouldn't have any WUs to distribute and as far as I know, 171.64.65.111 has not yet been repaired.
They are trying to send to both 171.64.65.111 and 171.67.108.17 with no luck. But I think one vanished but didn't see any record of it being counted. Yeah I did that and I read this topic before posting.
bruce wrote:
Baowoulf wrote:Any info on the status of the servers? I've been checking the news page but it hasn't been updated yet.
That's because somebody is working hard to correct whatever is wrong and the only thing anybody can tell you is that it will be fixed whenever they finish.
I know they are working hard. I am patient, I didn't say that to make it sound like OMG WTF IS GOING ON. I've been watching it for a couple days now. I was just curious about the status is all. If it was a big problem then I'd be like ok good luck with the problem and thanks for letting us know so we aren't watching it all day long on the status page lol.
bruce wrote:
Baowoulf wrote:With me it just says,
"The webpage cannot be displayed
Most likely caused:
Some content or files on this webpage require a program that you don't have installed."
That's exactly what you would expect when the Connection Status is "Reject"
I've never tried to view it when it was in Reject before so I had no idea.
I have a completed WU with the classic systray client waiting to upload as well and got this in my log file. I have been told that code 503 means that the server is busy or down. It has now 6 hours later and the client has tried to upload the WU again and has failed again.
[15:18:54] Finished Work Unit:
[15:18:54] - Reading up to 362448 from "work/wudata_01.arc": Read 362448
[15:18:54] - Reading up to 3519620 from "work/wudata_01.xtc": Read 3519620
[15:18:54] goefile size: 0
[15:18:54] logfile size: 928617
[15:18:54] Leaving Run
[15:18:58] - Writing 6576737 bytes of core data to disk...
[15:19:00] Done: 6576225 -> 4735911 (compressed to 72.0 percent)
[15:19:00] ... Done.
[15:19:00] - Shutting down core
[15:19:00]
[15:19:00] Folding@home Core Shutdown: FINISHED_UNIT
[15:19:02] CoreStatus = 64 (100)
[15:19:02] Sending work to server
[15:19:02] Project: 6316 (Run 714, Clone 11, Gen 55)
[15:19:02] + Attempting to send results [April 7 15:19:02 UTC]
[15:19:04] - Couldn't send HTTP request to server
[15:19:04] + Could not connect to Work Server (results)
[15:19:04] (171.64.65.111:8080)
[15:19:04] + Retrying using alternative port
[15:19:05] - Couldn't send HTTP request to server
[15:19:05] + Could not connect to Work Server (results)
[15:19:05] (171.64.65.111:80)
[15:19:05] - Error: Could not transmit unit 01 (completed April 7) to work server.
[15:19:05] Keeping unit 01 in queue.
[15:19:05] Project: 6316 (Run 714, Clone 11, Gen 55)
[15:19:05] + Attempting to send results [April 7 15:19:05 UTC]
[15:19:06] - Couldn't send HTTP request to server
[15:19:06] + Could not connect to Work Server (results)
[15:19:06] (171.64.65.111:8080)
[15:19:06] + Retrying using alternative port
[15:19:08] - Couldn't send HTTP request to server
[15:19:08] + Could not connect to Work Server (results)
[15:19:08] (171.64.65.111:80)
[15:19:08] - Error: Could not transmit unit 01 (completed April 7) to work server.
[15:19:08] + Attempting to send results [April 7 15:19:08 UTC]
[15:19:08] - Couldn't send HTTP request to server
[15:19:08] (Got status 503)
[15:19:08] + Could not connect to Work Server (results)
[15:19:08] (171.67.108.17:8080)
[15:19:08] + Retrying using alternative port
[15:19:08] - Couldn't send HTTP request to server
[15:19:08] (Got status 503)
[15:19:08] + Could not connect to Work Server (results)
[15:19:08] (171.67.108.17:80)
[15:19:08] Could not transmit unit 01 to Collection server; keeping in queue.
[15:19:08] - Preparing to get new work unit...
[15:19:08] + Attempting to get work packet
[15:19:08] - Connecting to assignment server
[15:19:09] - Successful: assigned to (171.64.65.65).
[15:19:09] + News From Folding@Home: Welcome to Folding@Home
[15:19:09] Loaded queue successfully.
[15:41:34] + Could not connect to Work Server
[15:41:34] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[15:41:45] + Attempting to get work packet
[15:41:45] - Connecting to assignment server
[15:41:45] - Successful: assigned to (169.230.26.30).
[15:41:45] + News From Folding@Home: Welcome to Folding@Home
[15:41:45] Loaded queue successfully.
[15:41:47] Project: 6316 (Run 714, Clone 11, Gen 55)
[15:41:47] + Attempting to send results [April 7 15:41:47 UTC]
[15:41:48] - Couldn't send HTTP request to server
[15:41:48] + Could not connect to Work Server (results)
[15:41:48] (171.64.65.111:8080)
[15:41:48] + Retrying using alternative port
[15:41:49] - Couldn't send HTTP request to server
[15:41:49] + Could not connect to Work Server (results)
[15:41:49] (171.64.65.111:80)
[15:41:49] - Error: Could not transmit unit 01 (completed April 7) to work server.
[15:41:49] + Attempting to send results [April 7 15:41:49 UTC]
[15:41:49] - Couldn't send HTTP request to server
[15:41:49] (Got status 503)
[15:41:49] + Could not connect to Work Server (results)
[15:41:49] (171.67.108.17:8080)
[15:41:49] + Retrying using alternative port
[15:41:50] - Couldn't send HTTP request to server
[15:41:50] (Got status 503)
[15:41:50] + Could not connect to Work Server (results)
[15:41:50] (171.67.108.17:80)
[15:41:50] Could not transmit unit 01 to Collection server; keeping in queue.
[15:41:50] + Closed connections
[15:41:50]
[15:41:50] + Processing work unit
[15:41:50] Core required: FahCore_82.exe
[15:41:50] Core not found.
[15:41:50] - Core is not present or corrupted.
[15:41:50] - Attempting to download new core...
[15:41:50] + Downloading new core: FahCore_82.exe
[15:41:50] + 10240 bytes downloaded
[15:41:50] + 20480 bytes downloaded
[15:41:50] + 30720 bytes downloaded
[15:41:51] + 40960 bytes downloaded
[15:41:51] + 51200 bytes downloaded
[15:41:51] + 61440 bytes downloaded
[15:41:51] + 71680 bytes downloaded.......................
Take it easy, guys. You can always tune your config a little to get another Wu if you feel your CPU cycles are wasted - otherwise just be patient. I had had four clients to upload results and obtain new Wu's, and over last couple of days it got done. Not all at once, but the last received a Wu just an hour ago.
yours,
endrik
*Bookworms will rule the world
(after we finish the background reading).
Did it upload to the WS (171.64.65.111) or to the CS? (171.67.108.17)?
It does look like 171.64.65.111 was up for a couple of hours today and it accepted something on the order of 7000-8000 WUs. Unfortunately it went back down again.
bruce wrote:It does look like 171.64.65.111 was up for a couple of hours today and it accepted something on the order of 7000-8000 WUs. Unfortunately it went back down again.
Yeah mine weren't lucky enough to get through. But my WU deadline isn't until May 10th so I can wait the science will still be used so I can be paitent.
--- Opening Log file [April 7 20:27:34] (...)
[20:27:37] - Preparing to get new work unit...
[20:27:37] - Presenting message box asking to network.
[20:27:38] + Attempting to get work packet
[20:27:38] - Connecting to assignment server
[20:27:43] - Successful: assigned to (171.64.65.111).
[20:27:43] + News From Folding@Home: Welcome to Folding@Home
[20:27:43] Loaded queue successfully.
[20:28:05] + Connections closed: You may now disconnect
[20:28:09]
[20:28:09] + Processing work unit
Now I have another pair of clients ready for refill - for the last umpteen hrs .111 have been in Reject mode again. And the CS "could not connect" too, even as according to serverstats it should be working.
yours,
endrik
*Bookworms will rule the world
(after we finish the background reading).
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Documents and Settings\Michael Arreola\Application Data\Folding@home-x86
[01:08:00] - Ask before connecting: No
[01:08:00] - User name: Baowoulf (Team 48759)
[01:08:00] - User ID: 5CA4BB560FCB57B7
[01:08:00] - Machine ID: 1
[01:08:00]
[01:08:00] Loaded queue successfully.
[01:08:00] Initialization complete
[01:08:00]
[01:08:00] + Processing work unit
[01:08:00] Project: 6315 (Run 525, Clone 19, Gen 22)
[01:08:00] - Read packet limit of 540015616... Set to 524286976.
[01:08:00] + Attempting to send results [April 9 01:08:00 UTC]
[01:08:00] Core required: FahCore_a0.exe
[01:08:00] Core found.
[01:08:00] Working on queue slot 08 [April 9 01:08:00 UTC]
[01:08:00] + Working ...
[01:08:00]
[01:08:00] *------------------------------*
[01:08:00] Folding@Home Gromacs 3.3 Core
[01:08:00] Version 1.93 (July 23, 2008)
[01:08:00]
[01:08:00] Preparing to commence simulation
[01:08:00] - Looking at optimizations...
[01:08:00] - Files status OK
[01:08:01] - Couldn't send HTTP request to server
[01:08:01] + Could not connect to Work Server (results)
[01:08:01] (171.64.65.111:8080)
[01:08:01] + Retrying using alternative port
[01:08:01] - Couldn't send HTTP request to server
[01:08:01] + Could not connect to Work Server (results)
[01:08:01] (171.64.65.111:80)
[01:08:01] - Error: Could not transmit unit 01 (completed April 4) to work server.
[01:08:01] - Read packet limit of 540015616... Set to 524286976.
[01:08:01] + Attempting to send results [April 9 01:08:01 UTC]
[01:08:01] - Couldn't send HTTP request to server
[01:08:01] + Could not connect to Work Server (results)
[01:08:01] (171.67.108.17:8080)
[01:08:01] + Retrying using alternative port
[01:08:02] - Couldn't send HTTP request to server
[01:08:02] + Could not connect to Work Server (results)
[01:08:02] (171.67.108.17:80)
[01:08:02] Could not transmit unit 01 to Collection server; keeping in queue.
[01:08:03] - Expanded 929074 -> 5947613 (decompressed 640.1 percent)
[01:08:03]
[01:08:03] Project: 1798 (Run 36, Clone 24, Gen 0)
[01:08:03]
[01:08:03] Assembly optimizations on if available.
[01:08:03] Entering M.D.
[01:08:09] FAH Init
[01:08:09] Checkpoint file:
[01:08:15] (Starting from checkpoint)
[01:08:15] Read checkpoint
[01:08:15] Protein: 41330
[01:08:15] Writing local files
[01:08:19] Extra SSE boost OK.
[01:08:20] Writing local files
[01:08:20] Completed 0 out of 500000 steps (0 percent)
[01:11:54] Opening C:\Documents and Settings\Michael Arreola\Application Data\Folding@home-x86\MyFolding.html...
Promotol? Those are those cool ones that give you the big version message at the beginning each time you start F@H isn't it? I thought those were so cool when I first got one.... haha Geek moment. Well the CPU LOAD is at 2.10 so hopefully soon.
Well patents has it's virtues. After a few days waiting my completed WU was finally sent. I knew it would happen eventually. Well within the deadline date.
[03:03:50] - Autosending finished units...
[03:03:50] Trying to send all finished work units
[03:03:50] - Read packet limit of 540015616... Set to 524286976.
[03:03:50] + Attempting to send results
[03:03:50] - Reading file work/wuresults_06.dat from core
[03:03:50] (Read 4755971 bytes from disk)
[03:03:50] Connecting to http://171.64.65.111:8080/
[03:07:48] Posted data.
[03:07:48] Initial: 0000; - Uploaded at ~19 kB/s
[03:07:48] - Averaged speed for that direction ~18 kB/s
[03:07:48] + Results successfully sent
[03:07:48] Thank you for your contribution to Folding@Home.
[03:07:48] + Number of Units Completed: 52
[03:07:49] + Sent 1 of 1 completed units to the server
[03:07:49] - Autosend completed
[
Yeah it got uploaded. To be fair I had to turn off my anti-virus internet protection for it to finally upload. I don't know if it was blocking it somehow (maybe because of it's size with Big WU's turned on) or it just was finally able to connect. Stupid antivirus software. I won't say which because I don't want to be promoting anything even thou I like it but the newer versions don't have ad-blocker or I'd upgrade today
