Page 16 of 28
Re: What do we do with all of the unsent workunits?
Posted: Wed Feb 17, 2010 10:23 pm
by 7im
Isn't this the same issue?
http://foldingforum.org/viewtopic.php?f ... &start=210
Edit by Mod:
Topics merged.
Re: What do we do with all of the unsent workunits?
Posted: Wed Feb 17, 2010 11:35 pm
by weedacres
It started with all of the server problems but If you'll look at the log in the first post you'll see that the message I get back when trying to do a manual send is:
Code: Select all
- Warning: Asked to send unfinished unit to server
So far this has been ignored in the other thread.
Re: What do we do with all of the unsent workunits?
Posted: Wed Feb 17, 2010 11:44 pm
by ArVee
There's no official announcement re a fix yet, but I just had 5 of 6 backlogged WU's go up under an autosend. That was for one gpu on one machine, so far nothing autosent from either of two on another machine. Hope others see something similar.
Re: What do we do with all of the unsent workunits?
Posted: Wed Feb 17, 2010 11:49 pm
by bruce
weedacres wrote:. . .If you'll look at the log in the first post you'll see that the message I get back when trying to do a manual send is:
Code: Select all
- Warning: Asked to send unfinished unit to server
So far this has been ignored in the other thread.
That's because in this context, the message is virtually new and you're probably the first one to notice it, not because it has been ignored. It means they're one step closer to fixing the problem.
Since this is just another symptom of the same problem, the topics should be merged.
Re: What do we do with all of the unsent workunits?
Posted: Thu Feb 18, 2010 12:21 am
by weedacres
bruce wrote:
That's because in this context, the message is virtually new and you're probably the first one to notice it, not because it has been ignored. It means they're one step closer to fixing the problem.
Since this is just another symptom of the same problem, the topics should be merged.
Ok, if you say so.
I currently have 78 completed workunits dated 2/14 that were moved into backup so I could continue to operate. Plus 1 from 2/16 and 2 from 2/17 that are in the active folders but won't upload.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 1:52 am
by Flathead74
Code: Select all
- Warning: Asked to send unfinished unit to server
Perhaps weedacres was the first person to notice this message, but not the only one.
I had also noticed this message on one of my systems,
but since weedacres had already posted about it, I did not chime in with a "me too".
This was on February 15 05:49:05 UTC.
It occurred when I attempted to manually upload "finished" work.
I tried with two different WUs, then gave up.
[05:48:16] Project: 10503 (Run 134, Clone 0, Gen 0)
[05:48:16] - Warning: Asked to send unfinished unit to server
[05:49:05] Project: 10xxx (Run 246, Clone 0, Gen 0)
[05:49:05] - Warning: Asked to send unfinished unit to server
I still have 119 WUs that were moved to backup so that I, too, could continue to operate.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 2:28 am
by Jolly-Swagman
Still getting issues with 171.67.108.21, gets new work on occasions but still have WU,s in Queue from back as far as Feb 04 2010 with hundreds of attenpts to upload ,
So may as well just shut the GPU,s down ,,,, after all I am the bunny paying for electricity to run these for what!! Science!!
That,s not happening if they dont get sent then is it!!
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 3:03 am
by Tobit
Holy cow, CPU and net-load are through the roof right now on .17 .25 and .26 collection servers. I have one client that refuses to time out and move on. heh.
[02:41:21] Connecting to
http://171.67.108.26:8080/
[02:51:36] Posted data.
it is now 02:58 and it is still sitting here. I guess it is time to manually intervene.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 5:09 am
by Amaruk
Flathead74 wrote:Code: Select all
- Warning: Asked to send unfinished unit to server
I had also noticed this message on one of my systems,
but since weedacres had already posted about it, I did not chime in with a "me too".
This was on February 15 05:49:05 UTC.
It occurred when I attempted to manually upload "finished" work.
I tried with two different WUs, then gave up.
[05:48:16] Project: 10503 (Run 134, Clone 0, Gen 0)
[05:48:16] - Warning: Asked to send unfinished unit to server
[05:49:05] Project: 10xxx (Run 246, Clone 0, Gen 0)
[05:49:05] - Warning: Asked to send unfinished unit to server
I still have 119 WUs that were moved to backup so that I, too, could continue to operate.
Me too.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 5:34 am
by weedacres
Perhaps weedacres was the first person to notice this message, but not the only one.
Me too.
Thanks
guys, I was beginning to think I was the only one and couldn't figure out why.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 6:44 am
by BSW_rama
[06:34:37] + Attempting to send results [February 18 06:34:37 UTC]
[06:34:39] (171.64.65.71:8080)
[06:34:42] (171.64.65.71:80)
[06:34:42] - Error: Could not transmit unit 03 (completed February 17) to work server.
in - ok
out - error
last time for my results 20 february.
Project: 10102 (Run 684, Clone 7, Gen 9) aka 548
i not will do 548 units.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 1:09 pm
by Tobit
.108.21 -- it is very weird how some WUs to this server upload just fine and others do not. I have had a WU in my queue for a few hours now that has been unable to transmit. However, some work I received from this server after this one have uploaded fine. My clients still hang very frequently when trying to connect to the 108.26 CS. At this moment, CPU load is acceptable and net-load is extremely low on .108.21-- however, CPU and net-load are still through the roof on all CS.
Code: Select all
Slot 09 Done
Project: 5781 (Run 10, Clone 80, Gen 4), Core: 11
Work server: 171.67.108.21:8080
Collection server: 171.67.108.26
Download date: February 17 22:09:32
Finished date: February 18 02:39:04
Failed uploads: 9
Code: Select all
Launch directory: C:\fah\gpu1
Executable: [email protected]
Arguments: -send all -verbosity 9
[12:58:10] - Ask before connecting: No
[12:58:10] - User name: Tobit (Team 33)
[12:58:10] - User ID: 1FA10FEE5F260BA4
[12:58:10] - Machine ID: 3
[12:58:10]
[12:58:10] Loaded queue successfully.
[12:58:10] Attempting to return result(s) to server...
[12:58:10] Trying to send all finished work units
[12:58:10] Project: 5781 (Run 10, Clone 80, Gen 4)
[12:58:10] - Read packet limit of 540015616... Set to 524286976.
[12:58:10] + Attempting to send results [February 18 12:58:10 UTC]
[12:58:10] - Reading file work/wuresults_09.dat from core
[12:58:10] (Read 168749 bytes from disk)
[12:58:10] Connecting to http://171.67.108.21:8080/
[12:58:11] - Couldn't send HTTP request to server
[12:58:11] + Could not connect to Work Server (results)
[12:58:11] (171.67.108.21:8080)
[12:58:11] + Retrying using alternative port
[12:58:11] Connecting to http://171.67.108.21:80/
[12:58:32] - Couldn't send HTTP request to server
[12:58:32] + Could not connect to Work Server (results)
[12:58:32] (171.67.108.21:80)
[12:58:32] - Error: Could not transmit unit 09 (completed February 18) to work server.
[12:58:32] - 9 failed uploads of this unit.
[12:58:32] - Read packet limit of 540015616... Set to 524286976.
[12:58:32] + Attempting to send results [February 18 12:58:32 UTC]
[12:58:32] - Reading file work/wuresults_09.dat from core
[12:58:32] (Read 168749 bytes from disk)
[12:58:32] Connecting to http://171.67.108.26:8080/
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 4:47 pm
by Marine Iguana
Thought i would add mine here too even though it's the same as everyone else only been able to send a few GPU WU's as far as i know and worried about the deadline for the rest of them
Code: Select all
[04:40:08] + Attempting to send results [February 18 04:40:08 UTC]
[04:40:10] + Results successfully sent
[04:40:10] Thank you for your contribution to Folding@Home.
[04:40:10] + Number of Units Completed: 175
[04:40:14] Project: 5786 (Run 2, Clone 39, Gen 32)
[04:40:14] + Attempting to send results [February 18 04:40:14 UTC]
[04:40:19] - Couldn't send HTTP request to server
[04:40:19] + Could not connect to Work Server (results)
[04:40:19] (171.67.108.21:8080)
[04:40:19] + Retrying using alternative port
[04:40:40] - Couldn't send HTTP request to server
[04:40:40] + Could not connect to Work Server (results)
[04:40:40] (171.67.108.21:80)
[04:40:40] - Error: Could not transmit unit 01 (completed February 17) to work server.
[04:40:40] + Attempting to send results [February 18 04:40:40 UTC]
[04:41:19] - Couldn't send HTTP request to server
[04:41:19] + Could not connect to Work Server (results)
[04:41:19] (171.67.108.26:8080)
[04:41:19] + Retrying using alternative port
[04:41:19] - Couldn't send HTTP request to server
[04:41:19] (Got status 503)
[04:41:19] + Could not connect to Work Server (results)
[04:41:19] (171.67.108.26:80)
[04:41:19] Could not transmit unit 01 to Collection server; keeping in queue.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 7:51 pm
by HaloJones
You know, it was bad enough to constantly deal with crap data causing 24 hour pauses in my folding through claiming that the problems were all at my end but now?
Code: Select all
[13:46:06] + Attempting to send results [February 18 13:46:06 UTC]
[13:46:08] - Couldn't send HTTP request to server
[13:46:08] + Could not connect to Work Server (results)
[13:46:08] (171.67.108.26:8080)
[13:46:08] + Retrying using alternative port
[13:46:08] - Couldn't send HTTP request to server
[13:46:08] (Got status 503)
[13:46:08] + Could not connect to Work Server (results)
[13:46:08] (171.67.108.26:80)
[13:46:08] Could not transmit unit 03 to Collection server; keeping in queue.
So a four hour "pause" while the client does
nothing?! I didn't buy expensive hardware for a system that can't deliver simple data for me to work on.
Seriously peed off.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Thu Feb 18, 2010 8:38 pm
by JimF
I also have a status 503 failure report on 171.67.108.26. Whether that is unusual or not is beyond me.
Code: Select all
[19:54:33] + Attempting to send results [February 18 19:54:33 UTC]
[19:54:35] - Server does not have record of this unit. Will try again later.
[19:54:35] - Error: Could not transmit unit 03 (completed February 18) to work server.
[19:54:35] Keeping unit 03 in queue.
[19:54:35] Project: 10105 (Run 428, Clone 0, Gen 11)
[19:54:35] - Read packet limit of 540015616... Set to 524286976.
[19:54:35] + Attempting to send results [February 18 19:54:35 UTC]
[19:54:37] - Server does not have record of this unit. Will try again later.
[19:54:37] - Error: Could not transmit unit 03 (completed February 18) to work server.
[19:54:37] - Read packet limit of 540015616... Set to 524286976.
[19:54:37] + Attempting to send results [February 18 19:54:37 UTC]
[19:54:42] - Server does not have record of this unit. Will try again later.
[19:54:42] Could not transmit unit 03 to Collection server; keeping in queue.
[19:54:42] - Preparing to get new work unit...
[19:54:42] + Attempting to get work packet
[19:54:42] - Connecting to assignment server
[19:54:42] - Successful: assigned to (171.67.108.21).
[19:54:42] + News From Folding@Home: Welcome to Folding@Home
[19:54:43] Loaded queue successfully.
[19:54:44] Project: 10105 (Run 428, Clone 0, Gen 11)
[19:54:44] - Read packet limit of 540015616... Set to 524286976.
[19:54:44] + Attempting to send results [February 18 19:54:44 UTC]
[19:54:45] - Server does not have record of this unit. Will try again later.
[19:54:45] - Error: Could not transmit unit 03 (completed February 18) to work server.
[19:54:45] - Read packet limit of 540015616... Set to 524286976.
[19:54:45] + Attempting to send results [February 18 19:54:45 UTC]
[20:09:51] + Could not connect to Work Server (results)
[20:09:51] (171.67.108.26:8080)
[20:09:51] + Retrying using alternative port
[20:09:51] - Couldn't send HTTP request to server
[20:09:51] (Got status 503)
[20:09:51] + Could not connect to Work Server (results)
[20:09:51] (171.67.108.26:80)
[20:09:51] Could not transmit unit 03 to Collection server; keeping in queue.
[20:09:51] + Closed connections