18601 multiple bad work units
Moderators: Site Moderators, FAHC Science Team
-
toTOW
- Site Moderator
- Posts: 6359
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: 18601 multiple bad work units
It's weird, the core doesn't even start ... it's probably software related ... do you have a security suite (Kaspersky, Norton, MacAfee, ...) that could interfere with the client ?
Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
-
BobWilliams757
- Posts: 521
- Joined: Fri Apr 03, 2020 2:22 pm
- Hardware configuration: ASRock X370M PRO4
Ryzen 2400G APU
16 GB DDR4-3200
MSI GTX 1660 Super Gaming X
Re: 18601 multiple bad work units
I noticed the early failure as well, seems strange that it fails before it begins normal functions.
For me, I noticed with the bad units, and still with the good ones, that the delay time during the core start/upload, platform identification seems on the slower side as compared to most work units. Even the GPU load jumps up and down several times as if it isn't starting the same as most projects. In my case, once started many (if not most) that failed did so in the first few percent of folding.
Looks like you are making a good run towards the top toTOW, top 100 is no easy feat these days.
For me, I noticed with the bad units, and still with the good ones, that the delay time during the core start/upload, platform identification seems on the slower side as compared to most work units. Even the GPU load jumps up and down several times as if it isn't starting the same as most projects. In my case, once started many (if not most) that failed did so in the first few percent of folding.
Looks like you are making a good run towards the top toTOW, top 100 is no easy feat these days.
Fold them if you get them!