Page 2 of 2
Re: No CUDA or OpenCL Support Detected for GPU
Posted: Wed Dec 09, 2020 1:36 pm
by gunnarre
aetch wrote:I think Ubuntu had been installing security updates in the background, something got broken and it took rebooting the machine to highlight it.
I'm not asking for help, the machine is running just fine.
If it was a security update for the kernel, then the Nvidia kernel module might not have been ready to be upgraded at the same time as the kernel. As long as the Nvidia driver is compatible with the kernel, it should put itself into the kernel every time you upgrade the kernel, but something could have gone wrong in that upgrade. Good to see that it was fixed.
Re: No CUDA or OpenCL Support Detected for GPU
Posted: Thu Dec 10, 2020 4:43 am
by psaam0001
tomc001 wrote:Unfortunately, Microsoft thinks it is their computer, not yours.
And M/S can take a hike with their 16-20 character activation codes that one almost needs "Hubble Space Telescope" strength lenses to read.
Free open-source O/S > proprietary closed source O/S's in my book.
Paul
Re: No CUDA or OpenCL Support Detected for GPU
Posted: Thu Dec 10, 2020 9:54 am
by Neil-B
For me it depends on circumstances ... Free Open Source works/is best in certain environments and for certain use cases but in others not so (anecdote follows):
A large government organisation (in a country I will not identify) dropped the use of a certain enterprise software vendor (supplying proprietary closed source suite of software integral to functioning of organisation) due to the percieved high cost of annual licensing (low 8 figure annual bill) along with concerns about the tie in issues and openly mandated the use of Free Open Source alternatives (banning any new use and any further development of capability with the proprietary closed source suite of software). Five years later after trying to develop an alternative infrastructure capability and trashing all development schedules and existing capabilities whilst doing so the decision was reversed - Post mortem indicated that the impact of this attempted move to Free Open Source to save money had actually costs far more (mid 9 figure over 5 years - not factoring in damage to business) than would ever be spent on pre-existing arrangements and that the organisation had simply not been able to replicate in house using this approach anything close to the complexity or maturity of the Proprietary Closed Source capability ... Given the vendor concerned has 10,000s of developers and has been around for decades it is I suppose not surprising that a few 1000 developers in house could not replicate the functionality and robustness, but hey someone sold the Organisation Leadership on the idea Free Open Source is best.
The same organisation does however use both Windows and Linux across the estate dependant upon the specific uses/needs .. so it isn't all bad for Free Open Source
Re: No CUDA or OpenCL Support Detected for GPU
Posted: Thu Dec 10, 2020 2:38 pm
by psaam0001
I was expressing a personal opinion, based on what I am now using the better part of my computing horsepower for (F@H).
However, it will be up to those who know the limitations of whether the software they need to have developed for a specific "mission critical" purpose, can function on a specific O/S, and be secure/reasonably fail-safe at the same time.
Paul
Re: No CUDA or OpenCL Support Detected for GPU
Posted: Fri Dec 22, 2023 8:16 am
by GalTriX
Hello there!!
I decided to build a F@H machine w\ 2 NVIDIA 1050 that were siting around, and choose Ubuntu as OS because seemed to have better PPD.
All this is an adventure, and following the same spirit I choose also Ubuntu 23.10. Had some beginner difficulties but after Ubuntu+F@H+Nvidia Drivers consolidation good numbers start to pop up, until I rebooted.
17:10:38:WARNING:FS01:No CUDA or OpenCL 1.2+ support detected for GPU slot 01: gpu:1:0 GP107 [GeForce GTX 1050 Ti] 2138. Disabling.
17:10:38:WARNING:FS02:No CUDA or OpenCL 1.2+ support detected for GPU slot 02: gpu:3:0 GP107 [GeForce GTX 1050 LP] 1862. Disabling.
17:10:38:ERROR:No valid folding configuration
I got Disabled Status @ folding slots. Later found out that reinstalling drivers with different version got GPUs enabled, until I had to reboot, until I ran out of versions to switch.
So, now I'm stuck. How can I enable the GPUs?
FAH Control Log:
Code: Select all
*********************** Log Started 2023-12-21T17:10:37Z ***********************
17:10:37:******************************* libFAH ********************************
17:10:37: Date: Oct 20 2020
17:10:37: Time: 20:36:39
17:10:37: Revision: 5ca109d295a6245e2a2f590b3d0085ad5e567aeb
17:10:37: Branch: master
17:10:37: Compiler: GNU 8.3.0
17:10:37: Options: -faligned-new -std=c++11 -fsigned-char -ffunction-sections
17:10:37: -fdata-sections -O3 -funroll-loops -fno-pie
17:10:37: Platform: linux2 5.8.0-1-amd64
17:10:37: Bits: 64
17:10:37: Mode: Release
17:10:37:****************************** FAHClient ******************************
17:10:37: Version: 7.6.21
17:10:37: Author: Joseph Coffland <[email protected]>
17:10:37: Copyright: 2020 foldingathome.org
17:10:37: Homepage: https://foldingathome.org/
17:10:37: Date: Oct 20 2020
17:10:37: Time: 20:39:00
17:10:37: Revision: 6efbf0e138e22d3963e6a291f78dcb9c6422a278
17:10:37: Branch: master
17:10:37: Compiler: GNU 8.3.0
17:10:37: Options: -faligned-new -std=c++11 -fsigned-char -ffunction-sections
17:10:37: -fdata-sections -O3 -funroll-loops -fno-pie
17:10:37: Platform: linux2 5.8.0-1-amd64
17:10:37: Bits: 64
17:10:37: Mode: Release
17:10:37: Args: -v --chdir /var/snap/folding-at-home-fcole90/common
17:10:37: Config: /var/snap/folding-at-home-fcole90/common/config.xml
17:10:37:******************************** CBang ********************************
17:10:37: Date: Oct 20 2020
17:10:37: Time: 18:37:59
17:10:37: Revision: 7e4ce85225d7eaeb775e87c31740181ca603de60
17:10:37: Branch: master
17:10:37: Compiler: GNU 8.3.0
17:10:37: Options: -faligned-new -std=c++11 -fsigned-char -ffunction-sections
17:10:37: -fdata-sections -O3 -funroll-loops -fno-pie -fPIC
17:10:37: Platform: linux2 5.8.0-1-amd64
17:10:37: Bits: 64
17:10:37: Mode: Release
17:10:37:******************************* System ********************************
17:10:37: CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz
17:10:37: CPU ID: GenuineIntel Family 6 Model 58 Stepping 9
17:10:37: CPUs: 4
17:10:37: Memory: 15.57GiB
17:10:37:Free Memory: 14.77GiB
17:10:37: Threads: POSIX_THREADS
17:10:37: OS Version: 6.5
17:10:37:Has Battery: false
17:10:37: On Battery: false
17:10:37: UTC Offset: 1
17:10:37: PID: 1084
17:10:37: CWD: /var/snap/folding-at-home-fcole90/581
17:10:37: OS: Linux 6.5.0-14-generic x86_64
17:10:37: OS Arch: AMD64
17:10:37: GPUs: 2
17:10:37: GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:5 GP107 [GeForce GTX 1050 Ti] 2138
17:10:37: GPU 1: Bus:3 Slot:0 Func:0 NVIDIA:5 GP107 [GeForce GTX 1050 LP] 1862
17:10:37: CUDA: Not detected: cuInit() returned 100
17:10:37: OpenCL: Not detected: clGetPlatformIDs() returned -1001
17:10:37:***********************************************************************
17:10:37:<config>
17:10:37: <!-- Client Control -->
17:10:37: <client-threads v='6'/>
17:10:37: <cycle-rate v='4'/>
17:10:37: <cycles v='-1'/>
17:10:37: <disable-sleep-when-active v='true'/>
17:10:37: <exit-when-done v='false'/>
17:10:37: <fold-anon v='false'/>
17:10:37: <idle-seconds v='300'/>
17:10:37: <open-web-control v='false'/>
17:10:37: <update-gpus-txt v='true'/>
17:10:37:
17:10:37: <!-- Configuration -->
17:10:37: <config-rotate v='true'/>
17:10:37: <config-rotate-dir v='configs'/>
17:10:37: <config-rotate-max v='16'/>
17:10:37:
17:10:37: <!-- Debugging -->
17:10:37: <assignment-servers>
17:10:37: assign1.foldingathome.org assign2.foldingathome.org assign3.foldingathome.org assign4.foldingathome.org
17:10:37: </assignment-servers>
17:10:37: <auth-as v='true'/>
17:10:37: <capture-directory v='capture'/>
17:10:37: <capture-on-error v='false'/>
17:10:37: <capture-packets v='false'/>
17:10:37: <capture-requests v='false'/>
17:10:37: <capture-responses v='false'/>
17:10:37: <capture-sockets v='false'/>
17:10:37: <debug-sockets v='false'/>
17:10:37: <exception-locations v='true'/>
17:10:37: <stack-traces v='false'/>
17:10:37:
17:10:37: <!-- Error Handling -->
17:10:37: <max-slot-errors v='10'/>
17:10:37: <max-unit-errors v='5'/>
17:10:37:
17:10:37: <!-- Folding Core -->
17:10:37: <checkpoint v='15'/>
17:10:37: <core-priority v='idle'/>
17:10:37: <cpu-usage v='100'/>
17:10:37: <gpu-usage v='100'/>
17:10:37: <no-assembly v='false'/>
17:10:37:
17:10:37: <!-- Folding Slot Configuration -->
17:10:37: <cause v='HUNTINGTONS'/>
17:10:37: <client-subtype v='LINUX'/>
17:10:37: <client-type v='normal'/>
17:10:37: <cpu-species v='X86_PENTIUM_II'/>
17:10:37: <cpu-type v='AMD64'/>
17:10:37: <cpus v='-1'/>
17:10:37: <disable-viz v='false'/>
17:10:37: <gpu v='true'/>
17:10:37: <gpu-beta v='false'/>
17:10:37: <max-packet-size v='normal'/>
17:10:37: <os-species v='UNKNOWN'/>
17:10:37: <os-type v='LINUX'/>
17:10:37: <project-key v='0'/>
17:10:37: <smp v='true'/>
17:10:37:
17:10:37: <!-- GUI -->
17:10:37: <gui-enabled v='true'/>
17:10:37:
17:10:37: <!-- HTTP Server -->
17:10:37: <allow v='127.0.0.1'/>
17:10:37: <connection-timeout v='60'/>
17:10:37: <deny v='0/0'/>
17:10:37: <http-addresses v='0:7396'/>
17:10:37: <https-addresses v=''/>
17:10:37: <max-connect-time v='900'/>
17:10:37: <max-connections v='800'/>
17:10:37: <max-request-length v='52428800'/>
17:10:37: <min-connect-time v='300'/>
17:10:37:
17:10:37: <!-- Logging -->
17:10:37: <log v='log.txt'/>
17:10:37: <log-color v='true'/>
17:10:37: <log-crlf v='false'/>
17:10:37: <log-date v='false'/>
17:10:37: <log-date-periodically v='21600'/>
17:10:37: <log-domain v='false'/>
17:10:37: <log-header v='true'/>
17:10:37: <log-level v='true'/>
17:10:37: <log-no-info-header v='true'/>
17:10:37: <log-redirect v='false'/>
17:10:37: <log-rotate v='true'/>
17:10:37: <log-rotate-dir v='logs'/>
17:10:37: <log-rotate-max v='16'/>
17:10:37: <log-short-level v='false'/>
17:10:37: <log-simple-domains v='true'/>
17:10:37: <log-thread-id v='false'/>
17:10:37: <log-thread-prefix v='true'/>
17:10:37: <log-time v='true'/>
17:10:37: <log-to-screen v='true'/>
17:10:37: <log-truncate v='false'/>
17:10:37: <verbosity v='3'/>
17:10:37:
17:10:37: <!-- Network -->
17:10:37: <proxy v=':8080'/>
17:10:37: <proxy-enable v='false'/>
17:10:37: <proxy-pass v='*****'/>
17:10:37: <proxy-user v=''/>
17:10:37:
17:10:37: <!-- Process Control -->
17:10:37: <child v='false'/>
17:10:37: <daemon v='false'/>
17:10:37: <fork v='false'/>
17:10:37: <pid v='false'/>
17:10:37: <pid-file v='FAHClient.pid'/>
17:10:37: <respawn v='false'/>
17:10:37: <service v='false'/>
17:10:37:
17:10:37: <!-- Remote Command Server -->
17:10:37: <command-address v='0.0.0.0'/>
17:10:37: <command-allow-no-pass v='127.0.0.1'/>
17:10:37: <command-deny-no-pass v='0/0'/>
17:10:37: <command-enable v='true'/>
17:10:37: <command-port v='36330'/>
17:10:37:
17:10:37: <!-- Slot Control -->
17:10:37: <auto-conf v='true'/>
17:10:37: <idle v='false'/>
17:10:37: <max-shutdown-wait v='60'/>
17:10:37: <pause-on-battery v='true'/>
17:10:37: <pause-on-start v='false'/>
17:10:37: <paused v='false'/>
17:10:37: <power v='light'/>
17:10:37:
17:10:37: <!-- User Information -->
17:10:37: <machine-id v='0'/>
17:10:37: <passkey v='*****'/>
17:10:37: <team v='262045'/>
17:10:37: <user v='GalTrix'/>
17:10:37:
17:10:37: <!-- Web Server -->
17:10:37: <web-allow v='127.0.0.1'/>
17:10:37: <web-deny v='0/0'/>
17:10:37: <web-enable v='true'/>
17:10:37:
17:10:37: <!-- Web Server Sessions -->
17:10:37: <session-cookie v='sid'/>
17:10:37: <session-lifetime v='86400'/>
17:10:37: <session-timeout v='3600'/>
17:10:37:
17:10:37: <!-- Work Unit Control -->
17:10:37: <dump-after-deadline v='true'/>
17:10:37: <max-queue v='16'/>
17:10:37: <max-units v='0'/>
17:10:37: <next-unit-percentage v='99'/>
17:10:37: <stall-detection-enabled v='false'/>
17:10:37: <stall-percent v='5'/>
17:10:37: <stall-timeout v='1800'/>
17:10:37:
17:10:37: <!-- Folding Slots -->
17:10:37: <slot id='1' type='GPU'>
17:10:37: <pci-bus v='1'/>
17:10:37: <pci-slot v='0'/>
17:10:37: </slot>
17:10:37: <slot id='2' type='GPU'>
17:10:37: <pci-bus v='3'/>
17:10:37: <pci-slot v='0'/>
17:10:37: </slot>
17:10:37:</config>
17:10:37:Trying to access database...
17:10:38:Successfully acquired database lock
17:10:38:WARNING:FS01:No CUDA or OpenCL 1.2+ support detected for GPU slot 01: gpu:1:0 GP107 [GeForce GTX 1050 Ti] 2138. Disabling.
17:10:38:WARNING:FS02:No CUDA or OpenCL 1.2+ support detected for GPU slot 02: gpu:3:0 GP107 [GeForce GTX 1050 LP] 1862. Disabling.
17:10:38:ERROR:No valid folding configuration
******************************* Date: 2023-12-22 *******************************
07:17:15:ERROR:Receive error: 4: Interrupted system call
When I run nvidia-smi:
Code: Select all
Fri Dec 22 08:31:34 2023
+---------------------------------------------------------------------------------------+
| NVIDIA-SMI 535.129.03 Driver Version: 535.129.03 CUDA Version: 12.2 |
|-----------------------------------------+----------------------+----------------------+
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|=========================================+======================+======================|
| 0 NVIDIA GeForce GTX 1050 Ti Off | 00000000:01:00.0 On | N/A |
| 0% 50C P0 N/A / 72W | 946MiB / 4096MiB | 4% Default |
| | | N/A |
+-----------------------------------------+----------------------+----------------------+
| 1 NVIDIA GeForce GTX 1050 Off | 00000000:03:00.0 Off | N/A |
| 0% 21C P8 N/A / 70W | 9MiB / 2048MiB | 0% Default |
| | | N/A |
+-----------------------------------------+----------------------+----------------------+
+---------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=======================================================================================|
| 0 N/A N/A 2016 G /usr/lib/xorg/Xorg 445MiB |
| 0 N/A N/A 2220 G /usr/bin/gnome-shell 156MiB |
| 0 N/A N/A 3035 G ...irefox/3216/usr/lib/firefox/firefox 330MiB |
| 0 N/A N/A 4813 G /usr/bin/nautilus 8MiB |
| 1 N/A N/A 2016 G /usr/lib/xorg/Xorg 4MiB |
+--------------------------------------------------------------------------------
-------+
Re: No CUDA or OpenCL Support Detected for GPU
Posted: Fri Dec 22, 2023 11:28 am
by bikeaddict
The system needs ocl-icd-opencl-dev installed for OpenCL support.
See
viewtopic.php?t=36824
Not sure why it doesn't find CUDA. On Fedora Linux, it's part of xorg-x11-drv-nvidia-cuda-libs that's installed by RPM Fusion.