Folding Forum

FAH can read and set power options with Powercfg. I assume FAH could also detect key presses and mouse moves so it knows when to start counting down to sleep time. A crash due to FAH is at least partially FAH's problem and it can be fixed within FAH.

Powercfg is specific to Windows and not portable across multiple OS's (Linux, OSX) like FAHControl, FAHClient are. As such, it will have a very limited appeal to the developer.

Maybe delaying the start up of FAH when the computer wakes up would prevent a crash.

FAH has mentioned that they will be developing a screensaver. Obviously it will have some kind of interface with key-press activity and will need to be OS-independent. Presumably it will provide the ability to set your GPU to fold only when the computer is inactive. That's not the same as sleep -- in fact, it's just the opposite -- but I suggest we table this suggestion for now. Let's wait and see what it provides. Maybe it will provide a foundation on which a sleep management feature can be added.

Barry wrote:My monitor's driver is up to date ("windows has determined that your driver software is up to date").

Windows update only identifies drivers being up to date that match MS's data, you can be running an older version for months before it will identify the driver as having an update available. As already mentioned, go to the nVidia site to find out what driver is current for your GPU. As for the rest, sleep and how a system reacts to it is up to the OS, F@H is not going to be able to do much about it. Especially if the problem is with a bug in the video driver. There is a known bug related to this very condition that is fixed by using a newer version of the video drivers from nVidia, post which version you are using and we can tell you if that one has the known problem.

nVidia's automatic driver finder didn't work even after I installed Java and I don't know what to select to get the manual driver finder to work. All I know is:

That's not NVidia's driver finder, that's Microsoft's, and as Joe_H said, Microsoft is often slow to distribute new drivers.
You may find that information at http://www.dell.com under "support" but I recommend http://www.nvidia.com.
Try http://www.nvidia.com/Download/index.aspx?lang=en-us

Yes, I mean I went to nvidia.com, then I installed Java, then the nVidia's automatic driver finder ran and said "The NVIDIA Smart Scan was unable to evaluate your system hardware. Please use Option 1 to manually find drivers for your NVIDIA products", but I didn't know which options to select (product type, series, etc.) for that.

All three of the following should give you the same information:

If you look on the first page of the V7 log, you'll find something like this (yours will be different):
> GPUs: 1
> GPU 0: NVIDIA:3 GK106 [GeForce GTX 650 Ti]
> CUDA: 3.0

If you go to the dell site and enter your product identifier, it will figure out what you have.

If you open microsoft's Device Manager panel, you need to look under Display Adapters, not under Monitors.

GPUs 1
CPU 0 ATI:4 BeaverCreek [Radeon HD 6410D]
CUDA Not detected

(my computer is an Acer and my monitor is a Dell)

The Dell monitor is irrelevant.

And nvidia isnt going to have any drivers for you as you have an ATI card.

Go here for your latest driver:
http://support.amd.com/us/gpudownload/w ... etect.aspx

Barry wrote:GPUs 1
CPU 0 ATI:4 BeaverCreek [Radeon HD 6410D]
CUDA Not detected

Ahhh, okay. I looked back over this thread back to the original post. I see the actual type of GPU never was listed by you before now. Someone else mentioned nVidia, then others and I took off from there. In that case, yes you have to go to either Acer's or to AMD's ATI support site to get updated drivers.

With a ATI GPU the latest driver known to be stable for use with F@H is version 12.8. A step by step guide for updating is located here, and a link to posts on another forum about getting the drivers to work for folding is in this post.

I saw that the driver date was 6/29/2011 and I went AMD's website to look for a new driver. All I found was the Catalyst Software Suite with Net 4 Support, released on 10/22/2012, which was a long download of more than just the necessary driver, but it worked! No more BSOD when waking up. The driver date is now listed as 9/27/2012, version 9.2.0.0. Microsoft Update was over a year behind.

Joe_H wrote:With a ATI GPU the latest driver known to be stable for use with F@H is version 12.8.

I just clicked "update driver" in Windows in case I initially did something wrong and it downgraded it back to the 6/29/2011 version! Then I clicked the rollback button and it went back to the 9/27/12 version. The update button said it will search the internet for an update...you'd think it would search the proper place. I guess it just checked what Microsoft currently has.

Don't trust Windows to install your drivers.

We gave you concise instructions on how to get 12.8. Please follow the suggestions given to you here to solve your problem.