Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

help setting up my gpu

https://foldingforum.org/viewtopic.php?t=17094

Page 2 of 3

Re: help setting up my gpu

Posted: Tue Dec 21, 2010 4:41 am
by PantherX
derrickmcc wrote:...You are running the v6.31 client, the latest GPU client is 6.32.
Download the latest client and check if your GPU is recognised.
It depends on the type of Client you are using:
Systray -> v6.32
Console -> v6.31

The Systray is one revision higher than Console because it required a minor change while the Console Client didn't.
paulpbaker wrote:...
derrickmcc wrote: You are running the v6.31 client, the latest GPU client is 6.32.
Download the latest client and check if your GPU is recognised.
just tried here's the log:

Code: Select all


--- Opening Log file [December 20 23:41:27 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          

###############################################################################
###############################################################################

Launch directory: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-623
Executable: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-623\[email protected]
...
You are using the GPU2 Client which is v6.23 while the GPU3 is v6.31/v6.32. For your GPU, either Client can work (in theory at least).

Regarding the CPU usage of FahCore_11, it varies from system to system but generally speaking, Nvidia GPUs use the least amount of CPU cycles.

For checking the GPU usage, can you download GPU-Z and under the Sensors tab, check the GPU Load.

Finally, you have stated that you have added -forcegpu nvidia_g80 but I can't view it in the FAHlog. If you use any arguments, it should appear like this:

Code: Select all


--- Opening Log file [December 19 06:07:22 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r1

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: E:\F@H GPU3
Executable: E:\F@H GPU3\[email protected]
Arguments: -verbosity 9 -forcegpu nvidia_g80

[06:07:22] - Ask before connecting: No
[06:07:22] - User name: PantherX (Team 69411)
[06:07:22] - User ID: 
[06:07:22] - Machine ID: 2

Re: help setting up my gpu

Posted: Tue Dec 21, 2010 9:56 pm
by paulpbaker
rjbelans wrote:Have you tried putting in the -advmethods flag? Also, the -verbosity 9 flag may give more details in the log if you're not already using it.
yeah tried that flag still didn't work... also here's my log with '-verbosity 9':

http://pastebin.com/raw.php?i=qiA3BHj9

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 12:08 am
by PantherX
I can't see anything wrong in your FAHlog: (pasted here for convenience)

Code: Select all

--- Opening Log file [December 21 21:55:04 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-623
Executable: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-623\[email protected]
Arguments: -verbosity 9 

[21:55:04] - Ask before connecting: No
[21:55:04] - User name: paulpbaker (Team 198456)
[21:55:04] - User ID: 1EB618290707DFEC
[21:55:04] - Machine ID: 2
[21:55:04] 
[21:55:04] Work directory not found. Creating...
[21:55:04] Could not open work queue, generating new queue...
[21:55:04] - Preparing to get new work unit...
[21:55:04] + Attempting to get work packet
[21:55:04] - Will indicate memory of 3070 MB
[21:55:04] - Autosending finished units... [December 21 21:55:04 UTC]
[21:55:04] - Detect CPU.[21:55:04] Trying to send all finished work units
 Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[21:55:04] + No unsent completed units remaining.
[21:55:04] - Autosend completed
[21:55:04] - Connecting to assignment server
[21:55:04] Connecting to http://assign-GPU.stanford.edu:8080/
[21:55:05] Posted data.
[21:55:05] Initial: 43AB; - Successful: assigned to (171.67.108.11).
[21:55:05] + News From Folding@Home: Welcome to Folding@Home
[21:55:05] Loaded queue successfully.
[21:55:05] Connecting to http://171.67.108.11:8080/
[21:55:06] Posted data.
[21:55:06] Initial: 0000; - Receiving payload (expected size: 45930)
[21:55:07] - Downloaded at ~44 kB/s
[21:55:07] - Averaged speed for that direction ~44 kB/s
[21:55:07] + Received work.
[21:55:07] + Closed connections
[21:55:07] 
[21:55:07] + Processing work unit
[21:55:07] Core required: FahCore_11.exe
[21:55:07] Core not found.
[21:55:07] - Core is not present or corrupted.
[21:55:07] - Attempting to download new core...
[21:55:07] + Downloading new core: FahCore_11.exe
[21:55:07] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_11.fah from www.stanford.edu)
[21:55:07] Initial: AFDE; + 10240 bytes downloaded
[21:55:08] Initial: E027; + 20480 bytes downloaded
[21:55:08] Initial: 8EE5; + 30720 bytes downloaded
[21:55:08] Initial: 9838; + 40960 bytes downloaded
[21:55:08] Initial: D615; + 51200 bytes downloaded
[21:55:08] Initial: CAA5; + 61440 bytes downloaded
[21:55:08] Initial: 3354; + 71680 bytes downloaded
[21:55:08] Initial: 6FF7; + 81920 bytes downloaded
[21:55:08] Initial: 5BA3; + 92160 bytes downloaded
[21:55:08] Initial: 23F0; + 102400 bytes downloaded
[21:55:08] Initial: C043; + 112640 bytes downloaded
[21:55:09] Initial: 2DB2; + 122880 bytes downloaded
[21:55:09] Initial: E434; + 133120 bytes downloaded
[21:55:09] Initial: 321F; + 143360 bytes downloaded
[21:55:09] Initial: 93B0; + 153600 bytes downloaded
[21:55:09] Initial: 245F; + 163840 bytes downloaded
[21:55:09] Initial: 6150; + 174080 bytes downloaded
[21:55:09] Initial: A664; + 184320 bytes downloaded
[21:55:09] Initial: 6EF8; + 194560 bytes downloaded
[21:55:09] Initial: 65A4; + 204800 bytes downloaded
[21:55:09] Initial: F31D; + 215040 bytes downloaded
[21:55:09] Initial: AD3D; + 225280 bytes downloaded
[21:55:09] Initial: FEF9; + 235520 bytes downloaded
[21:55:09] Initial: 9A18; + 245760 bytes downloaded
[21:55:10] Initial: F515; + 256000 bytes downloaded
[21:55:10] Initial: 7CD9; + 266240 bytes downloaded
[21:55:10] Initial: 0905; + 276480 bytes downloaded
[21:55:10] Initial: D379; + 286720 bytes downloaded
[21:55:10] Initial: 4E51; + 296960 bytes downloaded
[21:55:10] Initial: B099; + 307200 bytes downloaded
[21:55:10] Initial: 4645; + 317440 bytes downloaded
[21:55:10] Initial: D03A; + 327680 bytes downloaded
[21:55:10] Initial: 1144; + 337920 bytes downloaded
[21:55:10] Initial: 9388; + 348160 bytes downloaded
[21:55:10] Initial: 34A4; + 358400 bytes downloaded
[21:55:10] Initial: BD67; + 368640 bytes downloaded
[21:55:10] Initial: 0594; + 378880 bytes downloaded
[21:55:10] Initial: AFD1; + 389120 bytes downloaded
[21:55:10] Initial: 1A2A; + 399360 bytes downloaded
[21:55:11] Initial: 59F1; + 409600 bytes downloaded
[21:55:11] Initial: 2512; + 419840 bytes downloaded
[21:55:11] Initial: 74B1; + 430080 bytes downloaded
[21:55:11] Initial: 94F2; + 440320 bytes downloaded
[21:55:11] Initial: D8E0; + 450560 bytes downloaded
[21:55:11] Initial: 01A4; + 460800 bytes downloaded
[21:55:11] Initial: BCAF; + 471040 bytes downloaded
[21:55:11] Initial: B064; + 481280 bytes downloaded
[21:55:11] Initial: 3236; + 491520 bytes downloaded
[21:55:11] Initial: 3291; + 501760 bytes downloaded
[21:55:11] Initial: 6A7F; + 512000 bytes downloaded
[21:55:11] Initial: 61F7; + 522240 bytes downloaded
[21:55:11] Initial: F17C; + 532480 bytes downloaded
[21:55:11] Initial: 4E88; + 542720 bytes downloaded
[21:55:11] Initial: 7111; + 552960 bytes downloaded
[21:55:11] Initial: 1568; + 563200 bytes downloaded
[21:55:12] Initial: 9B04; + 573440 bytes downloaded
[21:55:12] Initial: 783B; + 583680 bytes downloaded
[21:55:12] Initial: 2FC8; + 593920 bytes downloaded
[21:55:12] Initial: E6E7; + 604160 bytes downloaded
[21:55:12] Initial: E7AB; + 614400 bytes downloaded
[21:55:12] Initial: D677; + 624640 bytes downloaded
[21:55:12] Initial: 5C98; + 634880 bytes downloaded
[21:55:12] Initial: 7BEE; + 645120 bytes downloaded
[21:55:12] Initial: D127; + 655360 bytes downloaded
[21:55:12] Initial: CADE; + 665067 bytes downloaded
[21:55:12] Verifying core Core_11.fah...
[21:55:12] Signature is VALID
[21:55:12] 
[21:55:12] Trying to unzip core FahCore_11.exe
[21:55:13] Decompressed FahCore_11.exe (1908736 bytes) successfully
[21:55:18] + Core successfully engaged
[21:55:23] 
[21:55:23] + Processing work unit
[21:55:23] Core required: FahCore_11.exe
[21:55:23] Core found.
[21:55:23] Working on queue slot 01 [December 21 21:55:23 UTC]
[21:55:23] + Working ...
[21:55:23] - Calling '.\FahCore_11.exe -dir work/ -suffix 01 -checkpoint 15 -verbose -lifeline 1856 -version 623'

[21:55:23] 
[21:55:23] *------------------------------*
[21:55:23] Folding@Home GPU Core
[21:55:23] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[21:55:23] 
[21:55:23] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[21:55:23] Build host: amoeba
[21:55:23] Board Type: Nvidia
[21:55:23] Core      : 
[21:55:23] Preparing to commence simulation
[21:55:23] - Looking at optimizations...
[21:55:23] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[21:55:23] - Created dyn
[21:55:23] - Files status OK
[21:55:23] - Expanded 45418 -> 251112 (decompressed 552.8 percent)
[21:55:23] Called DecompressByteArray: compressed_data_size=45418 data_size=251112, decompressed_data_size=251112 diff=0
[21:55:23] - Digital signature verified
[21:55:23] 
[21:55:23] Project: 5770 (Run 7, Clone 352, Gen 114)
[21:55:23] 
[21:55:23] Assembly optimizations on if available.
[21:55:23] Entering M.D.
[21:55:29] Tpr hash work/wudata_01.tpr:  1463715222 3210209269 465668466 1195633998 3134535260
[21:55:29] 
[21:55:29] Calling fah_main args: 14 usage=100
[21:55:29] 
[21:55:29] Working on Protein
[21:55:31] Client config found, loading data.
[21:55:31] Starting GUI Server

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 12:12 am
by paulpbaker
PantherX wrote:I can't see anything wrong in your FAHlog: (pasted here for convenience)
how about the fact it just halts on 'Starting GUI Server'?

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 12:19 am
by PantherX
That message is common and after it you should see a message of completed 1% How long that 1% takes is dependent on the GPU. Is GPU-Z registering any activity for the GPU? If so, then how much activity and what are the Core, Shader, Memory frequencies?

EDIT -> Here is an example of the FAHlog:

Code: Select all

[11:41:24] + Processing work unit
[11:41:24] Core required: FahCore_11.exe
[11:41:24] Core found.
[11:41:24] Working on queue slot 03 [June 6 11:41:24 UTC]
[11:41:24] + Working ...
[11:41:24] - Calling '.\FahCore_11.exe -dir work/ -suffix 03 -nice 19 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 5220 -version 630'

[11:41:24]
[11:41:24] *------------------------------*
[11:41:24] Folding@Home GPU Core
[11:41:24] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[11:41:24]
[11:41:24] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[11:41:24] Build host: amoeba
[11:41:24] Board Type: Nvidia
[11:41:24] Core      :
[11:41:24] Preparing to commence simulation
[11:41:24] - Looking at optimizations...
[11:41:24] DeleteFrameFiles: successfully deleted file=work/wudata_03.ckp
[11:41:24] - Created dyn
[11:41:24] - Files status OK
[11:41:24] - Expanded 73749 -> 383588 (decompressed 520.1 percent)
[11:41:24] Called DecompressByteArray: compressed_data_size=73749 data_size=383588, decompressed_data_size=383588 diff=0
[11:41:24] - Digital signature verified
[11:41:24]
[11:41:24] Project: 6604 (Run 1, Clone 489, Gen 109)
[11:41:24]
[11:41:24] Assembly optimizations on if available.
[11:41:24] Entering M.D.
[11:41:30] Tpr hash work/wudata_03.tpr:  1477787084 1384759726 1973887367 4054726080 1597118518
[11:41:30]
[11:41:30] Calling fah_main args: 14 usage=100
[11:41:30]
[11:41:31] Working on Protein
[11:41:32] Client config found, loading data.
[11:41:32] Starting GUI Server
[11:43:59] Completed 1%
As you can see, it takes 2 minutes, 27 second before anything else is written in the FAHlog.

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 2:46 am
by ChasR
The last log the OP posted shows he downloaded v6.23 not 6.32:

--- Opening Log file [December 20 23:41:27 UTC]


# Windows GPU Console Edition #################################################
###############################################################################

Folding@Home Client Version 6.23

Edit : Sorry for being a little slow

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 2:50 am
by paulpbaker
PantherX wrote:That message is common and after it you should see a message of completed 1% How long that 1% takes is dependent on the GPU. Is GPU-Z registering any activity for the GPU? If so, then how much activity and what are the Core, Shader, Memory frequencies?
but that's the problem no matter how long i leave it it never gets to that point where it shows te h% complete and yes gpu-z shows 98% usage etc... very odd
ChasR wrote:The last log the OP posted shows he downloaded v6.23 not 6.32:

--- Opening Log file [December 20 23:41:27 UTC]


# Windows GPU Console Edition #################################################
###############################################################################

Folding@Home Client Version 6.23
that's the system tray client i'm using the console version and 6.23 is the latest

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 2:57 am
by rjbelans
As PantherX stated above 6.32 is the latest systray version and 6.31 is the latest console version. You did have the correct version the first time. Also posted above, the -forcegpu nvidia_g80 flag is not shown in the log file. It should be showing there if it has been added. Do you have your flags entered through the config, or do you put them into a desktop shortcut? I have heard of people having problems with them not working properly when entered during the config.

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 3:02 am
by PantherX
I have read a few reports where it took more than 1 hour to complete a single frame. Have you tried running the GPU Client overnight? Also, what are the values of Core, Shaders, Memory when the GPU is having a load of ~98%? Also, in the first post, the screenshot indicated that it resumed working, but it never reached a percentage :e?:

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 3:12 am
by paulpbaker
rjbelans wrote:As PantherX stated above 6.32 is the latest systray version and 6.31 is the latest console version. You did have the correct version the first time. Also posted above, the -forcegpu nvidia_g80 flag is not shown in the log file. It should be showing there if it has been added. Do you have your flags entered through the config, or do you put them into a desktop shortcut? I have heard of people having problems with them not working properly when entered during the config.
where is this 6.31 as i can only find 6.23 on the download page

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 3:28 am
by Amaruk
HERE
PantherX wrote:I have read a few reports where it took more than 1 hour to complete a single frame.
I think you're on the right track - it appears the 8500 GT has 16 shaders. SOURCE

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 3:40 am
by paulpbaker
downloaded and installed that version and even tho it's only bee n10mins it's still stuck on the same part... and it's also still saying gpu isn't recognised

--- Opening Log file [December 22 03:30:10 UTC]


# Windows GPU Console Edition #################################################
###############################################################################

Folding@Home Client Version 6.30r1

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-631
Executable: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-631\[email protected]


[03:30:10] Gpu species not recognized.
[03:30:10] Configuring Folding@Home...


[03:31:30] - Ask before connecting: No
[03:31:30] - User name: paulpbaker (Team 198456)
[03:31:30] - User ID: 1EB618290707DFEC
[03:31:30] - Machine ID: 2
[03:31:30]
[03:31:30] Work directory not found. Creating...
[03:31:30] Could not open work queue, generating new queue...
[03:31:30] - Preparing to get new work unit...
[03:31:30] Cleaning up work directory
[03:31:30] + Attempting to get work packet
[03:31:30] Passkey found
[03:31:30] Gpu species not recognized.
[03:31:30] - Connecting to assignment server
[03:31:31] - Successful: assigned to (171.67.108.11).
[03:31:31] + News From Folding@Home: Welcome to Folding@Home
[03:31:31] Loaded queue successfully.
[03:31:31] Gpu species not recognized.
[03:31:33] + Closed connections
[03:31:33]
[03:31:33] + Processing work unit
[03:31:33] Core required: FahCore_11.exe
[03:31:33] Core not found.
[03:31:33] - Core is not present or corrupted.
[03:31:33] - Attempting to download new core...
[03:31:33] + Downloading new core: FahCore_11.exe
[03:31:33] + 10240 bytes downloaded
[03:31:33] + 20480 bytes downloaded
[03:31:33] + 30720 bytes downloaded
[03:31:34] + 40960 bytes downloaded
[03:31:34] + 51200 bytes downloaded
[03:31:34] + 61440 bytes downloaded
[03:31:34] + 71680 bytes downloaded
[03:31:34] + 81920 bytes downloaded
[03:31:34] + 92160 bytes downloaded
[03:31:34] + 102400 bytes downloaded
[03:31:34] + 112640 bytes downloaded
[03:31:34] + 122880 bytes downloaded
[03:31:34] + 133120 bytes downloaded
[03:31:34] + 143360 bytes downloaded
[03:31:34] + 153600 bytes downloaded
[03:31:34] + 163840 bytes downloaded
[03:31:34] + 174080 bytes downloaded
[03:31:34] + 184320 bytes downloaded
[03:31:35] + 194560 bytes downloaded
[03:31:35] + 204800 bytes downloaded
[03:31:35] + 215040 bytes downloaded
[03:31:35] + 225280 bytes downloaded
[03:31:35] + 235520 bytes downloaded
[03:31:35] + 245760 bytes downloaded
[03:31:35] + 256000 bytes downloaded
[03:31:35] + 266240 bytes downloaded
[03:31:35] + 276480 bytes downloaded
[03:31:35] + 286720 bytes downloaded
[03:31:35] + 296960 bytes downloaded
[03:31:35] + 307200 bytes downloaded
[03:31:35] + 317440 bytes downloaded
[03:31:35] + 327680 bytes downloaded
[03:31:36] + 337920 bytes downloaded
[03:31:36] + 348160 bytes downloaded
[03:31:36] + 358400 bytes downloaded
[03:31:36] + 368640 bytes downloaded
[03:31:36] + 378880 bytes downloaded
[03:31:36] + 389120 bytes downloaded
[03:31:36] + 399360 bytes downloaded
[03:31:36] + 409600 bytes downloaded
[03:31:36] + 419840 bytes downloaded
[03:31:36] + 430080 bytes downloaded
[03:31:36] + 440320 bytes downloaded
[03:31:36] + 450560 bytes downloaded
[03:31:36] + 460800 bytes downloaded
[03:31:36] + 471040 bytes downloaded
[03:31:36] + 481280 bytes downloaded
[03:31:37] + 491520 bytes downloaded
[03:31:37] + 501760 bytes downloaded
[03:31:37] + 512000 bytes downloaded
[03:31:37] + 522240 bytes downloaded
[03:31:37] + 532480 bytes downloaded
[03:31:37] + 542720 bytes downloaded
[03:31:37] + 552960 bytes downloaded
[03:31:37] + 563200 bytes downloaded
[03:31:37] + 573440 bytes downloaded
[03:31:37] + 583680 bytes downloaded
[03:31:37] + 593920 bytes downloaded
[03:31:37] + 604160 bytes downloaded
[03:31:37] + 614400 bytes downloaded
[03:31:37] + 624640 bytes downloaded
[03:31:37] + 634880 bytes downloaded
[03:31:38] + 645120 bytes downloaded
[03:31:38] + 655360 bytes downloaded
[03:31:38] + 665067 bytes downloaded
[03:31:38] Verifying core Core_11.fah...
[03:31:38] Signature is VALID
[03:31:38]
[03:31:38] Trying to unzip core FahCore_11.exe
[03:31:38] Decompressed FahCore_11.exe (1908736 bytes) successfully
[03:31:43] + Core successfully engaged
[03:31:48]
[03:31:48] + Processing work unit
[03:31:48] Core required: FahCore_11.exe
[03:31:48] Core found.
[03:31:48] Working on queue slot 01 [December 22 03:31:48 UTC]
[03:31:48] + Working ...
[03:31:48]
[03:31:48] *------------------------------*
[03:31:48] Folding@Home GPU Core
[03:31:48] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[03:31:48]
[03:31:48] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[03:31:48] Build host: amoeba
[03:31:48] Board Type: Nvidia
[03:31:48] Core :
[03:31:48] Preparing to commence simulation
[03:31:48] - Looking at optimizations...
[03:31:48] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[03:31:48] - Created dyn
[03:31:48] - Files status OK
[03:31:48] - Expanded 45418 -> 251112 (decompressed 552.8 percent)
[03:31:48] Called DecompressByteArray: compressed_data_size=45418 data_size=251112, decompressed_data_size=251112 diff=0
[03:31:48] - Digital signature verified
[03:31:48]
[03:31:48] Project: 5770 (Run 7, Clone 352, Gen 114)
[03:31:48]
[03:31:48] Assembly optimizations on if available.
[03:31:48] Entering M.D.
[03:31:54] Tpr hash work/wudata_01.tpr: 1463715222 3210209269 465668466 1195633998 3134535260
[03:31:54]
[03:31:54] Calling fah_main args: 14 usage=100
[03:31:54]
[03:31:54] Working on Protein
[03:31:56] Client config found, loading data.
[03:31:56] Starting GUI Server

Folding@Home Client Shutdown.


--- Opening Log file [December 22 03:37:42 UTC]


# Windows GPU Console Edition #################################################
###############################################################################

Folding@Home Client Version 6.30r1

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-631
Executable: C:\Users\Paul\Desktop\Folding@home-Win32-GPU_Vista-631\[email protected]
Arguments: -forcegpu nvidia_g80

[03:37:42] - Ask before connecting: No
[03:37:42] - User name: paulpbaker (Team 198456)
[03:37:42] - User ID: 1EB618290707DFEC
[03:37:42] - Machine ID: 2
[03:37:42]
[03:37:42] Gpu species not recognized.
[03:37:43] Loaded queue successfully.
[03:37:43]
[03:37:43] + Processing work unit
[03:37:43] Core required: FahCore_11.exe
[03:37:43] Core found.
[03:37:43] Working on queue slot 01 [December 22 03:37:43 UTC]
[03:37:43] + Working ...
[03:37:43]
[03:37:43] *------------------------------*
[03:37:43] Folding@Home GPU Core
[03:37:43] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[03:37:43]
[03:37:43] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[03:37:43] Build host: amoeba
[03:37:43] Board Type: Nvidia
[03:37:43] Core :
[03:37:43] Preparing to commence simulation
[03:37:43] - Looking at optimizations...
[03:37:43] - Files status OK
[03:37:43] - Expanded 45418 -> 251112 (decompressed 552.8 percent)
[03:37:43] Called DecompressByteArray: compressed_data_size=45418 data_size=251112, decompressed_data_size=251112 diff=0
[03:37:43] - Digital signature verified
[03:37:43]
[03:37:43] Project: 5770 (Run 7, Clone 352, Gen 114)
[03:37:43]
[03:37:43] Assembly optimizations on if available.
[03:37:43] Entering M.D.
[03:37:49] Will resume from checkpoint file
[03:37:49] Tpr hash work/wudata_01.tpr: 1463715222 3210209269 465668466 1195633998 3134535260
[03:37:49]
[03:37:49] Calling fah_main args: 14 usage=100
[03:37:49]
[03:37:49] Working on Protein
[03:37:51] Client config found, loading data.
[03:37:51] Starting GUI Server
[03:37:51] Resuming from checkpoint
[03:37:51] fcCheckPointResume: retreived and current tpr file hash:
[03:37:51] 0 1463715222 1463715222
[03:37:51] 1 3210209269 3210209269
[03:37:51] 2 465668466 465668466
[03:37:51] 3 1195633998 1195633998
[03:37:51] 4 3134535260 3134535260
[03:37:51] fcCheckPointResume: file hashes same.
[03:37:51] fcCheckPointResume: state restored.
[03:37:51] Verified work/wudata_01.log
[03:37:51] Verified work/wudata_01.edr
[03:37:51] Verified work/wudata_01.xtc

Folding@Home Client Shutdown.

Re: help setting up my gpu

Posted: Wed Dec 22, 2010 3:52 am
by Amaruk

Code: Select all

[03:37:51] Client config found, loading data.
[03:37:51] Starting GUI Server
[03:37:51] Resuming from checkpoint
[03:37:51] fcCheckPointResume: retreived and current tpr file hash:
[03:37:51] 0 1463715222 1463715222
[03:37:51] 1 3210209269 3210209269
[03:37:51] 2 465668466 465668466
[03:37:51] 3 1195633998 1195633998
[03:37:51] 4 3134535260 3134535260
[03:37:51] fcCheckPointResume: file hashes same.
[03:37:51] fcCheckPointResume: state restored.
[03:37:51] Verified work/wudata_01.log
[03:37:51] Verified work/wudata_01.edr
[03:37:51] Verified work/wudata_01.xtc
This looks OK. Also, the -forcegpu flag overrides 'Gpu species not recognized.'

Since your card (8500 GT) has only 16 shaders it will be very slow. I agree with PantherX - let it fold overnight and see what happens.

Re: help setting up my gpu

Posted: Thu Dec 23, 2010 1:47 am
by codysluder
Add both -forcegpu and -advmethods along with the -verbosity flag. Post a new copy of the FAHlog.

Re: help setting up my gpu

Posted: Thu Dec 23, 2010 4:49 am
by rjbelans
One more thing for a visual cue of whether or not the client is actually running. Download a program like MSI Afterburner or EVGA Precision and have it running when you have the client running. If it shows that there is GPU Usage then it's running. Hopefully it shows 90-99% usage if everything is working properly.
All times are UTC
Page 2 of 3

Powered by phpBB® Forum Software © phpBB Limited