Page 2 of 4
Re: 171.67.108.22
Posted: Wed Aug 11, 2010 10:35 am
by Mactin
Cant send -bigadv for the past 8 hours
Code: Select all
[01:37:31] Completed 250000 out of 250000 steps (100%)
[01:37:46] DynamicWrapper: Finished Work Unit: sleep=10000
[01:37:55]
[01:37:55] Finished Work Unit:
[01:37:55] - Reading up to 52713120 from "work/wudata_05.trr": Read 52713120
[01:37:56] trr file hash check passed.
[01:37:56] - Reading up to 42830380 from "work/wudata_05.xtc": Read 42830380
[01:37:56] xtc file hash check passed.
[01:37:56] edr file hash check passed.
[01:37:56] logfile size: 214105
[01:37:56] Leaving Run
[01:38:01] - Writing 95925549 bytes of core data to disk...
[01:38:02] ... Done.
[01:38:45] - Shutting down core
[01:38:45]
[01:38:45] Folding@home Core Shutdown: FINISHED_UNIT
[01:38:53] CoreStatus = 64 (100)
[01:38:53] Unit 5 finished with 63 percent of time to deadline remaining.
[01:38:53] Updated performance fraction: 0.750521
[01:38:53] Sending work to server
[01:38:53] Project: 2682 (Run 6, Clone 0, Gen 18)
[01:38:53] + Attempting to send results [August 11 01:38:53 UTC]
[01:38:53] - Reading file work/wuresults_05.dat from core
[01:38:53] (Read 95925549 bytes from disk)
[01:38:53] Connecting to http://171.67.108.22:8080/
[01:55:00] - Autosending finished units... [August 11 01:55:00 UTC]
[01:55:00] Trying to send all finished work units
[01:55:00] - Already sending work
[01:55:00] + Sent 0 of 1 completed units to the server
[01:55:00] - Autosend completed
[02:15:08] - Couldn't send HTTP request to server
[02:15:08] + Could not connect to Work Server (results)
[02:15:08] (171.67.108.22:8080)
[02:15:08] + Retrying using alternative port
[02:15:08] Connecting to http://171.67.108.22:80/
[02:15:12] - Couldn't send HTTP request to server
[02:15:12] + Could not connect to Work Server (results)
[02:15:12] (171.67.108.22:80)
[02:15:12] - Error: Could not transmit unit 05 (completed August 11) to work server.
[02:15:12] - 1 failed uploads of this unit.
[02:15:12] Keeping unit 05 in queue.
[02:15:12] Trying to send all finished work units
[02:15:12] Project: 2682 (Run 6, Clone 0, Gen 18)
[02:15:12] + Attempting to send results [August 11 02:15:12 UTC]
[02:15:12] - Reading file work/wuresults_05.dat from core
[02:15:12] (Read 95925549 bytes from disk)
[02:15:12] Connecting to http://171.67.108.22:8080/
[02:15:13] - Couldn't send HTTP request to server
[02:15:13] + Could not connect to Work Server (results)
[02:15:13] (171.67.108.22:8080)
[02:15:13] + Retrying using alternative port
[02:15:13] Connecting to http://171.67.108.22:80/
[02:15:15] - Couldn't send HTTP request to server
[02:15:15] + Could not connect to Work Server (results)
[02:15:15] (171.67.108.22:80)
[02:15:15] - Error: Could not transmit unit 05 (completed August 11) to work server.
[02:15:15] - 2 failed uploads of this unit.
[02:15:15] + Attempting to send results [August 11 02:15:15 UTC]
[02:15:15] - Reading file work/wuresults_05.dat from core
[02:15:15] (Read 95925549 bytes from disk)
[02:15:15] Connecting to http://171.67.108.25:8080/
[02:15:37] - Couldn't send HTTP request to server
[02:15:37] + Could not connect to Work Server (results)
[02:15:37] (171.67.108.25:8080)
[02:15:37] + Retrying using alternative port
[02:15:37] Connecting to http://171.67.108.25:80/
[02:15:58] - Couldn't send HTTP request to server
[02:15:58] + Could not connect to Work Server (results)
[02:15:58] (171.67.108.25:80)
[02:15:58] Could not transmit unit 05 to Collection server; keeping in queue.
[02:15:58] + Sent 0 of 1 completed units to the server
[02:15:58] - Preparing to get new work unit...
[02:15:58] Cleaning up work directory
[02:16:02] + Attempting to get work packet
[02:16:02] Passkey found
[02:16:02] - Will indicate memory of 7500 MB
[02:16:02] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 12, Stepping: 2
[02:16:02] - Connecting to assignment server
[02:16:02] Connecting to http://assign.stanford.edu:8080/
[02:16:03] Posted data.
[02:16:03] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[02:16:03] + News From Folding@Home: Welcome to Folding@Home
[02:16:03] Loaded queue successfully.
[02:16:03] Connecting to http://171.67.108.22:8080/
[02:16:04] - Couldn't send HTTP request to server
[02:16:04] + Could not connect to Work Server
[02:16:04] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[02:16:20] + Attempting to get work packet
[02:16:20] Passkey found
[02:16:20] - Will indicate memory of 7500 MB
[02:16:20] - Connecting to assignment server
[02:16:20] Connecting to http://assign.stanford.edu:8080/
[02:16:21] Posted data.
[02:16:21] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[02:16:21] + News From Folding@Home: Welcome to Folding@Home
[02:16:21] Loaded queue successfully.
[02:16:21] Connecting to http://171.67.108.22:8080/
[02:16:30] Posted data.
[02:16:30] Initial: 0000; - Receiving payload (expected size: 25462712)
[02:17:37] - Downloaded at ~371 kB/s
[02:17:37] - Averaged speed for that direction ~360 kB/s
[02:17:37] + Received work.
[02:17:37] Trying to send all finished work units
[02:17:37] Project: 2682 (Run 6, Clone 0, Gen 18)
[02:17:37] + Attempting to send results [August 11 02:17:37 UTC]
[02:17:37] - Reading file work/wuresults_05.dat from core
[02:17:37] (Read 95925549 bytes from disk)
[02:17:37] Connecting to http://171.67.108.22:8080/
[02:22:27] - Couldn't send HTTP request to server
[02:22:27] + Could not connect to Work Server (results)
[02:22:27] (171.67.108.22:8080)
[02:22:27] + Retrying using alternative port
[02:22:27] Connecting to http://171.67.108.22:80/
[02:22:30] - Couldn't send HTTP request to server
[02:22:30] + Could not connect to Work Server (results)
[02:22:30] (171.67.108.22:80)
[02:22:30] - Error: Could not transmit unit 05 (completed August 11) to work server.
[02:22:30] - 3 failed uploads of this unit.
[02:22:30] + Attempting to send results [August 11 02:22:30 UTC]
[02:22:30] - Reading file work/wuresults_05.dat from core
[02:22:30] (Read 95925549 bytes from disk)
[02:22:30] Connecting to http://171.67.108.25:8080/
[02:22:50] - Couldn't send HTTP request to server
[02:22:50] + Could not connect to Work Server (results)
[02:22:50] (171.67.108.25:8080)
[02:22:50] + Retrying using alternative port
[02:22:50] Connecting to http://171.67.108.25:80/
[02:23:10] - Couldn't send HTTP request to server
[02:23:10] + Could not connect to Work Server (results)
[02:23:10] (171.67.108.25:80)
[02:23:10] Could not transmit unit 05 to Collection server; keeping in queue.
[02:23:10] + Sent 0 of 1 completed units to the server
[02:23:10] + Closed connections
[02:23:10]
[02:23:10] + Processing work unit
[02:23:10] Core required: FahCore_a3.exe
[02:23:10] Core found.
[02:23:10] Working on queue slot 06 [August 11 02:23:10 UTC]
[02:23:10] + Working ...
[02:23:10] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 10 -checkpoint 10 -forceasm -verbose -lifeline 5612 -version 629'
[02:23:11]
[02:23:11] *------------------------------*
[02:23:11] Folding@Home Gromacs SMP Core
[02:23:11] Version 2.22 (Mar 12, 2010)
[02:23:11]
[02:23:11] Preparing to commence simulation
[02:23:11] - Assembly optimizations manually forced on.
[02:23:11] - Not checking prior termination.
[02:23:16] - Expanded 25462200 -> 31941441 (decompressed 125.4 percent)
[02:23:16] Called DecompressByteArray: compressed_data_size=25462200 data_size=31941441, decompressed_data_size=31941441 diff=0
[02:23:16] - Digital signature verified
[02:23:16]
[02:23:16] Project: 2686 (Run 1, Clone 1, Gen 9)
[02:23:16]
[02:23:16] Assembly optimizations on if available.
[02:23:16] Entering M.D.
[02:23:26] Completed 0 out of 250000 steps (0%)
[02:26:02] Killing all core threads
[02:26:02] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown at user request.
[02:26:02] ***** Got a SIGTERM signal (2)
[02:26:02] Killing all core threads
[02:26:02] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown.
--- Opening Log file [August 11 02:29:09 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files (x86)\folding\m1 SMP
Executable: C:\Program Files (x86)\folding\m1 SMP\[email protected]
Arguments: -smp 10 -verbosity 9 -forceasm -bigadv -config
[02:29:09] - Ask before connecting: No
[02:29:09] - User name: Martin_i7-980x (Team 96377)
[02:29:09] - User ID: 6C6A12517E046D46
[02:29:09] - Machine ID: 1
[02:29:09]
[02:29:09] Configuring Folding@Home...
[02:29:12] - Ask before connecting: No
[02:29:12] - User name: Martin_i7-980x (Team 96377)
[02:29:12] - User ID: 6C6A12517E046D46
[02:29:12] - Machine ID: 1
[02:29:12]
[02:29:12] Loaded queue successfully.
[02:29:12]
[02:29:12] - Autosending finished units... [August 11 02:29:12 UTC]
[02:29:12] + Processing work unit
[02:29:12] Trying to send all finished work units
[02:29:12] Core required: FahCore_a3.exe
[02:29:12] Project: 2682 (Run 6, Clone 0, Gen 18)
[02:29:12] Core found.
[02:29:12] + Attempting to send results [August 11 02:29:12 UTC]
[02:29:12] - Reading file work/wuresults_05.dat from core
[02:29:12] Working on queue slot 06 [August 11 02:29:12 UTC]
[02:29:12] (Read 95925549 bytes from disk)
[02:29:12] + Working ...
[02:29:12] Connecting to http://171.67.108.22:8080/
[02:29:12] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 10 -checkpoint 10 -forceasm -verbose -lifeline 4660 -version 629'
[02:29:13]
[02:29:13] *------------------------------*
[02:29:13] Folding@Home Gromacs SMP Core
[02:29:13] Version 2.22 (Mar 12, 2010)
[02:29:13]
[02:29:13] Preparing to commence simulation
[02:29:13] - Ensuring status. Please wait.
[02:29:22] - Assembly optimizations manually forced on.
[02:29:22] - Not checking prior termination.
[02:29:40] - Expanded 25462200 -> 31941441 (decompressed 125.4 percent)
[02:29:40] Called DecompressByteArray: compressed_data_size=25462200 data_size=31941441, decompressed_data_size=31941441 diff=0
[02:29:41] - Digital signature verified
[02:29:41]
[02:29:41] Project: 2686 (Run 1, Clone 1, Gen 9)
[02:29:41]
[02:29:41] Assembly optimizations on if available.
[02:29:41] Entering M.D.
[02:31:07] Completed 0 out of 250000 steps (0%)
[03:10:10] - Couldn't send HTTP request to server
[03:10:10] + Could not connect to Work Server (results)
[03:10:10] (171.67.108.22:8080)
[03:10:10] + Retrying using alternative port
[03:10:10] Connecting to http://171.67.108.22:80/
[03:24:16] - Couldn't send HTTP request to server
[03:24:16] + Could not connect to Work Server (results)
[03:24:16] (171.67.108.22:80)
[03:24:16] - Error: Could not transmit unit 05 (completed August 11) to work server.
[03:24:16] - 4 failed uploads of this unit.
[03:24:16] + Attempting to send results [August 11 03:24:16 UTC]
[03:24:16] - Reading file work/wuresults_05.dat from core
[03:24:16] (Read 95925549 bytes from disk)
[03:24:16] Connecting to http://171.67.108.25:8080/
[03:24:37] - Couldn't send HTTP request to server
[03:24:37] + Could not connect to Work Server (results)
[03:24:37] (171.67.108.25:8080)
[03:24:37] + Retrying using alternative port
[03:24:37] Connecting to http://171.67.108.25:80/
[03:24:58] - Couldn't send HTTP request to server
[03:24:58] + Could not connect to Work Server (results)
[03:24:58] (171.67.108.25:80)
[03:24:58] Could not transmit unit 05 to Collection server; keeping in queue.
[03:24:58] + Sent 0 of 1 completed units to the server
[03:24:58] - Autosend completed
[03:35:07] Completed 2500 out of 250000 steps (1%)
[03:42:00] Killing all core threads
[03:42:00] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown at user request.
[03:42:00] ***** Got a SIGTERM signal (2)
[03:42:00] Killing all core threads
[03:42:00] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown.
--- Opening Log file [August 11 03:42:04 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files (x86)\folding\m1 SMP
Executable: C:\Program Files (x86)\folding\m1 SMP\[email protected]
Arguments: -smp 10 -verbosity 9 -forceasm -bigadv -config
[03:42:04] - Ask before connecting: No
[03:42:04] - User name: Martin_i7-980x (Team 96377)
[03:42:04] - User ID: 6C6A12517E046D46
[03:42:04] - Machine ID: 1
[03:42:04]
[03:42:04] Configuring Folding@Home...
[03:42:06] - Ask before connecting: No
[03:42:06] - User name: Martin_i7-980x (Team 96377)
[03:42:06] - User ID: 6C6A12517E046D46
[03:42:06] - Machine ID: 1
[03:42:06]
[03:42:06] Loaded queue successfully.
[03:42:06]
[03:42:06] - Autosending finished units... [August 11 03:42:06 UTC]
[03:42:06] + Processing work unit
[03:42:06] Trying to send all finished work units
[03:42:06] Core required: FahCore_a3.exe
[03:42:06] Project: 2682 (Run 6, Clone 0, Gen 18)
[03:42:06] Core found.
[03:42:06] + Attempting to send results [August 11 03:42:06 UTC]
[03:42:06] - Reading file work/wuresults_05.dat from core
[03:42:06] Working on queue slot 06 [August 11 03:42:06 UTC]
[03:42:06] (Read 95925549 bytes from disk)
[03:42:06] + Working ...
[03:42:06] Connecting to http://171.67.108.22:8080/
[03:42:06] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 10 -checkpoint 10 -forceasm -verbose -lifeline 2600 -version 629'
[03:42:06]
[03:42:06] *------------------------------*
[03:42:06] Folding@Home Gromacs SMP Core
[03:42:06] Version 2.22 (Mar 12, 2010)
[03:42:06]
[03:42:06] Preparing to commence simulation
[03:42:06] - Ensuring status. Please wait.
[03:42:16] - Assembly optimizations manually forced on.
[03:42:16] - Not checking prior termination.
[03:42:21] - Expanded 25462200 -> 31941441 (decompressed 125.4 percent)
[03:42:21] Called DecompressByteArray: compressed_data_size=25462200 data_size=31941441, decompressed_data_size=31941441 diff=0
[03:42:21] - Digital signature verified
[03:42:21]
[03:42:21] Project: 2686 (Run 1, Clone 1, Gen 9)
[03:42:21]
[03:42:21] Assembly optimizations on if available.
[03:42:21] Entering M.D.
[03:42:27] Using Gromacs checkpoints
[03:42:31] Resuming from checkpoint
[03:42:33] Verified work/wudata_06.log
[03:42:33] Verified work/wudata_06.trr
[03:42:33] Verified work/wudata_06.xtc
[03:42:33] Verified work/wudata_06.edr
[03:42:35] Completed 2915 out of 250000 steps (1%)
[03:52:15] - Couldn't send HTTP request to server
[03:52:15] + Could not connect to Work Server (results)
[03:52:15] (171.67.108.22:8080)
[03:52:15] + Retrying using alternative port
[03:52:15] Connecting to http://171.67.108.22:80/
[03:52:19] - Couldn't send HTTP request to server
[03:52:19] + Could not connect to Work Server (results)
[03:52:19] (171.67.108.22:80)
[03:52:19] - Error: Could not transmit unit 05 (completed August 11) to work server.
[03:52:19] - 5 failed uploads of this unit.
[03:52:19] + Attempting to send results [August 11 03:52:19 UTC]
[03:52:19] - Reading file work/wuresults_05.dat from core
[03:52:19] (Read 95925549 bytes from disk)
[03:52:19] Connecting to http://171.67.108.25:8080/
[03:52:19] - Couldn't send HTTP request to server
[03:52:19] + Could not connect to Work Server (results)
[03:52:19] (171.67.108.25:8080)
[03:52:19] + Retrying using alternative port
[03:52:19] Connecting to http://171.67.108.25:80/
[03:52:19] - Couldn't send HTTP request to server
[03:52:19] + Could not connect to Work Server (results)
[03:52:19] (171.67.108.25:80)
[03:52:20] Could not transmit unit 05 to Collection server; keeping in queue.
[03:52:20] + Sent 0 of 1 completed units to the server
[03:52:20] - Autosend completed
[04:08:57] Completed 5000 out of 250000 steps (2%)
[04:40:38] Completed 7500 out of 250000 steps (3%)
[05:12:11] Completed 10000 out of 250000 steps (4%)
[05:43:55] Completed 12500 out of 250000 steps (5%)
[06:15:27] Completed 15000 out of 250000 steps (6%)
[06:47:04] Completed 17500 out of 250000 steps (7%)
[07:18:37] Completed 20000 out of 250000 steps (8%)
[07:50:07] Completed 22500 out of 250000 steps (9%)
[08:21:36] Completed 25000 out of 250000 steps (10%)
[08:53:07] Completed 27500 out of 250000 steps (11%)
[09:24:45] Completed 30000 out of 250000 steps (12%)
[09:52:20] - Autosending finished units... [August 11 09:52:20 UTC]
[09:52:20] Trying to send all finished work units
[09:52:20] Project: 2682 (Run 6, Clone 0, Gen 18)
[09:52:20] + Attempting to send results [August 11 09:52:20 UTC]
[09:52:20] - Reading file work/wuresults_05.dat from core
[09:52:20] (Read 95925549 bytes from disk)
[09:52:20] Connecting to http://171.67.108.22:8080/
[09:56:24] Completed 32500 out of 250000 steps (13%)
[10:06:26] - Couldn't send HTTP request to server
[10:06:26] + Could not connect to Work Server (results)
[10:06:26] (171.67.108.22:8080)
[10:06:26] + Retrying using alternative port
[10:06:26] Connecting to http://171.67.108.22:80/
[10:06:28] - Couldn't send HTTP request to server
[10:06:28] + Could not connect to Work Server (results)
[10:06:28] (171.67.108.22:80)
[10:06:28] - Error: Could not transmit unit 05 (completed August 11) to work server.
[10:06:28] - 6 failed uploads of this unit.
[10:06:28] + Attempting to send results [August 11 10:06:28 UTC]
[10:06:28] - Reading file work/wuresults_05.dat from core
[10:06:28] (Read 95925549 bytes from disk)
[10:06:28] Connecting to http://171.67.108.25:8080/
[10:06:48] - Couldn't send HTTP request to server
[10:06:48] + Could not connect to Work Server (results)
[10:06:48] (171.67.108.25:8080)
[10:06:48] + Retrying using alternative port
[10:06:48] Connecting to http://171.67.108.25:80/
[10:07:09] - Couldn't send HTTP request to server
[10:07:09] + Could not connect to Work Server (results)
[10:07:09] (171.67.108.25:80)
[10:07:09] Could not transmit unit 05 to Collection server; keeping in queue.
[10:07:09] + Sent 0 of 1 completed units to the server
[10:07:09] - Autosend completed
[10:28:04] Completed 35000 out of 250000 steps (14%)
EDIT : Just after I posted, I restarted the client and the WU went thru. Houray !
Re: 503 error from 171.67.108.25
Posted: Wed Aug 11, 2010 12:32 pm
by caintry_boy
bruce wrote:Error 503 means the server is NOT down, but it is overloaded. Once the traffic gets to the point that the server cannot handle any more, some people do get through and others are rejected with a 503.
It should be noted that you didn't follow the instructions in the "Do this first" post. You're reporting a problem with a Collection Server, not a Work Server and we can't do anything about server 171.67.108.25. We need to know what's happening to the OTHER server that you didn't report.
Reckon I missed the part where it wouldn't connect to 171.67.108.22:80 or :8080.... Here's some log for all to look at:
Code: Select all
09:44:01] + Attempting to get work packet
[09:44:01] Passkey found
[09:44:01] - Will indicate memory of 3070 MB
[09:44:01] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 5
[09:44:01] - Connecting to assignment server
[09:44:01] Connecting to http://assign.stanford.edu:8080/
[09:44:02] Posted data.
[09:44:02] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[09:44:02] + News From Folding@Home: Welcome to Folding@Home
[09:44:02] Loaded queue successfully.
[09:44:02] Connecting to http://171.67.108.22:8080/
[09:44:13] Posted data.
[09:44:13] Initial: 0000; - Receiving payload (expected size: 25463066)
[09:47:20] - Downloaded at ~132 kB/s
[09:47:20] - Averaged speed for that direction ~125 kB/s
[09:47:20] + Received work.
[09:47:20] Trying to send all finished work units
[09:47:20] + No unsent completed units remaining.
[09:47:20] + Closed connections
[09:47:20]
[09:47:20] + Processing work unit
[09:47:20] Core required: FahCore_a3.exe
[09:47:20] Core found.
[09:47:20] Working on queue slot 05 [August 8 09:47:20 UTC]
[09:47:20] + Working ...
[09:47:20] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 8 -checkpoint 30 -verbose -lifeline 2104 -version 629'
[09:47:20]
[09:47:20] *------------------------------*
[09:47:20] Folding@Home Gromacs SMP Core
[09:47:20] Version 2.22 (Mar 12, 2010)
[09:47:20]
[09:47:20] Preparing to commence simulation
[09:47:20] - Looking at optimizations...
[09:47:20] - Created dyn
[09:47:20] - Files status OK
[09:47:24] - Expanded 25462554 -> 31941441 (decompressed 125.4 percent)
[09:47:24] Called DecompressByteArray: compressed_data_size=25462554 data_size=31941441, decompressed_data_size=31941441 diff=0
[09:47:24] - Digital signature verified
[09:47:24]
[09:47:24] Project: 2686 (Run 1, Clone 16, Gen 6)
[09:47:24]
[09:47:25] Assembly optimizations on if available.
[09:47:25] Entering M.D.
[09:47:34] Completed 0 out of 250000 steps (0%)
[10:22:29] Completed 2500 out of 250000 steps (1%)
[10:57:25] Completed 5000 out of 250000 steps (2%)
[11:32:14] Completed 7500 out of 250000 steps (3%)
[12:07:01] Completed 10000 out of 250000 steps (4%)
[12:41:46] Completed 12500 out of 250000 steps (5%)
[13:17:13] Completed 15000 out of 250000 steps (6%)
[13:52:57] Completed 17500 out of 250000 steps (7%)
[14:28:30] Completed 20000 out of 250000 steps (8%)
[15:03:37] Completed 22500 out of 250000 steps (9%)
[15:07:19] - Autosending finished units... [August 8 15:07:19 UTC]
[15:07:19] Trying to send all finished work units
[15:07:19] + No unsent completed units remaining.
[15:07:19] - Autosend completed
[15:39:01] Completed 25000 out of 250000 steps (10%)
[16:14:27] Completed 27500 out of 250000 steps (11%)
[16:49:57] Completed 30000 out of 250000 steps (12%)
[17:25:24] Completed 32500 out of 250000 steps (13%)
[18:01:45] Completed 35000 out of 250000 steps (14%)
[18:36:53] Completed 37500 out of 250000 steps (15%)
[19:11:52] Completed 40000 out of 250000 steps (16%)
[19:46:54] Completed 42500 out of 250000 steps (17%)
[20:22:09] Completed 45000 out of 250000 steps (18%)
[20:57:18] Completed 47500 out of 250000 steps (19%)
[21:07:20] - Autosending finished units... [August 8 21:07:20 UTC]
[21:07:20] Trying to send all finished work units
[21:07:20] + No unsent completed units remaining.
[21:07:20] - Autosend completed
[21:32:34] Completed 50000 out of 250000 steps (20%)
[22:07:46] Completed 52500 out of 250000 steps (21%)
[22:43:02] Completed 55000 out of 250000 steps (22%)
[23:18:32] Completed 57500 out of 250000 steps (23%)
[23:54:22] Completed 60000 out of 250000 steps (24%)
[00:29:59] Completed 62500 out of 250000 steps (25%)
[01:05:21] Completed 65000 out of 250000 steps (26%)
[01:40:18] Completed 67500 out of 250000 steps (27%)
[02:15:14] Completed 70000 out of 250000 steps (28%)
[02:50:16] Completed 72500 out of 250000 steps (29%)
[03:07:20] - Autosending finished units... [August 9 03:07:20 UTC]
[03:07:20] Trying to send all finished work units
[03:07:20] + No unsent completed units remaining.
[03:07:20] - Autosend completed
[03:25:41] Completed 75000 out of 250000 steps (30%)
[04:01:25] Completed 77500 out of 250000 steps (31%)
[04:37:06] Completed 80000 out of 250000 steps (32%)
[05:12:50] Completed 82500 out of 250000 steps (33%)
[05:48:37] Completed 85000 out of 250000 steps (34%)
[06:24:22] Completed 87500 out of 250000 steps (35%)
[06:59:59] Completed 90000 out of 250000 steps (36%)
[07:35:39] Completed 92500 out of 250000 steps (37%)
[08:10:59] Completed 95000 out of 250000 steps (38%)
[08:46:06] Completed 97500 out of 250000 steps (39%)
[09:07:20] - Autosending finished units... [August 9 09:07:20 UTC]
[09:07:20] Trying to send all finished work units
[09:07:20] + No unsent completed units remaining.
[09:07:20] - Autosend completed
[09:21:18] Completed 100000 out of 250000 steps (40%)
[09:56:20] Completed 102500 out of 250000 steps (41%)
[10:31:41] Completed 105000 out of 250000 steps (42%)
[11:07:03] Completed 107500 out of 250000 steps (43%)
[11:42:31] Completed 110000 out of 250000 steps (44%)
[12:17:59] Completed 112500 out of 250000 steps (45%)
[12:53:07] Completed 115000 out of 250000 steps (46%)
[13:28:15] Completed 117500 out of 250000 steps (47%)
[14:03:30] Completed 120000 out of 250000 steps (48%)
[14:38:42] Completed 122500 out of 250000 steps (49%)
[15:07:20] - Autosending finished units... [August 9 15:07:20 UTC]
[15:07:20] Trying to send all finished work units
[15:07:20] + No unsent completed units remaining.
[15:07:20] - Autosend completed
[15:14:00] Completed 125000 out of 250000 steps (50%)
[15:49:26] Completed 127500 out of 250000 steps (51%)
[16:24:39] Completed 130000 out of 250000 steps (52%)
[16:59:52] Completed 132500 out of 250000 steps (53%)
[17:35:01] Completed 135000 out of 250000 steps (54%)
[18:10:10] Completed 137500 out of 250000 steps (55%)
[18:45:31] Completed 140000 out of 250000 steps (56%)
[19:20:49] Completed 142500 out of 250000 steps (57%)
[19:56:04] Completed 145000 out of 250000 steps (58%)
[20:31:17] Completed 147500 out of 250000 steps (59%)
[21:06:33] Completed 150000 out of 250000 steps (60%)
[21:07:20] - Autosending finished units... [August 9 21:07:20 UTC]
[21:07:20] Trying to send all finished work units
[21:07:20] + No unsent completed units remaining.
[21:07:20] - Autosend completed
[21:41:55] Completed 152500 out of 250000 steps (61%)
[22:17:24] Completed 155000 out of 250000 steps (62%)
[22:52:43] Completed 157500 out of 250000 steps (63%)
[23:27:53] Completed 160000 out of 250000 steps (64%)
[00:03:07] Completed 162500 out of 250000 steps (65%)
[00:38:23] Completed 165000 out of 250000 steps (66%)
[01:13:49] Completed 167500 out of 250000 steps (67%)
[01:48:57] Completed 170000 out of 250000 steps (68%)
[02:24:01] Completed 172500 out of 250000 steps (69%)
[02:59:05] Completed 175000 out of 250000 steps (70%)
[03:07:20] - Autosending finished units... [August 10 03:07:20 UTC]
[03:07:20] Trying to send all finished work units
[03:07:20] + No unsent completed units remaining.
[03:07:20] - Autosend completed
[03:34:05] Completed 177500 out of 250000 steps (71%)
[04:09:06] Completed 180000 out of 250000 steps (72%)
[04:44:35] Completed 182500 out of 250000 steps (73%)
[05:19:38] Completed 185000 out of 250000 steps (74%)
[05:54:54] Completed 187500 out of 250000 steps (75%)
[06:30:25] Completed 190000 out of 250000 steps (76%)
[07:05:53] Completed 192500 out of 250000 steps (77%)
[07:41:23] Completed 195000 out of 250000 steps (78%)
[08:16:37] Completed 197500 out of 250000 steps (79%)
[08:52:15] Completed 200000 out of 250000 steps (80%)
[09:07:20] - Autosending finished units... [August 10 09:07:20 UTC]
[09:07:20] Trying to send all finished work units
[09:07:20] + No unsent completed units remaining.
[09:07:20] - Autosend completed
[09:27:58] Completed 202500 out of 250000 steps (81%)
[10:03:40] Completed 205000 out of 250000 steps (82%)
[10:39:24] Completed 207500 out of 250000 steps (83%)
[11:15:06] Completed 210000 out of 250000 steps (84%)
[11:50:48] Completed 212500 out of 250000 steps (85%)
[12:26:21] Completed 215000 out of 250000 steps (86%)
[13:01:50] Completed 217500 out of 250000 steps (87%)
[13:37:17] Completed 220000 out of 250000 steps (88%)
[14:12:46] Completed 222500 out of 250000 steps (89%)
[14:48:18] Completed 225000 out of 250000 steps (90%)
[15:07:20] - Autosending finished units... [August 10 15:07:20 UTC]
[15:07:20] Trying to send all finished work units
[15:07:20] + No unsent completed units remaining.
[15:07:20] - Autosend completed
[15:23:43] Completed 227500 out of 250000 steps (91%)
[15:58:56] Completed 230000 out of 250000 steps (92%)
[16:34:04] Completed 232500 out of 250000 steps (93%)
[17:09:02] Completed 235000 out of 250000 steps (94%)
[17:44:01] Completed 237500 out of 250000 steps (95%)
[18:19:10] Completed 240000 out of 250000 steps (96%)
[18:54:40] Completed 242500 out of 250000 steps (97%)
[19:30:12] Completed 245000 out of 250000 steps (98%)
[20:05:44] Completed 247500 out of 250000 steps (99%)
[20:41:18] Completed 250000 out of 250000 steps (100%)
[20:41:41] DynamicWrapper: Finished Work Unit: sleep=10000
[20:41:51]
[20:41:51] Finished Work Unit:
[20:41:51] - Reading up to 52713120 from "work/wudata_05.trr": Read 52713120
[20:41:51] trr file hash check passed.
[20:41:51] - Reading up to 47138284 from "work/wudata_05.xtc": Read 47138284
[20:41:51] xtc file hash check passed.
[20:41:51] edr file hash check passed.
[20:41:51] logfile size: 204237
[20:41:51] Leaving Run
[20:41:54] - Writing 100226617 bytes of core data to disk...
[20:41:56] ... Done.
[20:42:08] - Shutting down core
[20:42:08]
[20:42:08] Folding@home Core Shutdown: FINISHED_UNIT
[20:42:13] CoreStatus = 64 (100)
[20:42:13] Unit 5 finished with 59 percent of time to deadline remaining.
[20:42:13] Updated performance fraction: 0.667715
[20:42:13] Sending work to server
[20:42:13] Project: 2686 (Run 1, Clone 16, Gen 6)
[20:42:13] + Attempting to send results [August 10 20:42:13 UTC]
[20:42:13] - Reading file work/wuresults_05.dat from core
[20:42:14] (Read 100226617 bytes from disk)
[20:42:14] Connecting to http://171.67.108.22:8080/
[21:02:58] - Couldn't send HTTP request to server
[21:02:58] + Could not connect to Work Server (results)
[21:02:58] (171.67.108.22:8080)
[21:02:58] + Retrying using alternative port
[21:02:58] Connecting to http://171.67.108.22:80/
[21:07:20] - Autosending finished units... [August 10 21:07:20 UTC]
[21:07:20] Trying to send all finished work units
[21:07:20] - Already sending work
[21:07:20] + Sent 0 of 1 completed units to the server
[21:07:20] - Autosend completed
[21:25:53] - Couldn't send HTTP request to server
[21:25:53] + Could not connect to Work Server (results)
[21:25:53] (171.67.108.22:80)
[21:25:53] - Error: Could not transmit unit 05 (completed August 10) to work server.
[21:25:53] - 1 failed uploads of this unit.
[21:25:53] Keeping unit 05 in queue.
[21:25:53] Trying to send all finished work units
[21:25:53] Project: 2686 (Run 1, Clone 16, Gen 6)
[21:25:53] + Attempting to send results [August 10 21:25:53 UTC]
[21:25:53] - Reading file work/wuresults_05.dat from core
[21:25:53] (Read 100226617 bytes from disk)
[21:25:53] Connecting to http://171.67.108.22:8080/
[21:25:55] - Couldn't send HTTP request to server
[21:25:55] + Could not connect to Work Server (results)
[21:25:55] (171.67.108.22:8080)
[21:25:55] + Retrying using alternative port
[21:25:55] Connecting to http://171.67.108.22:80/
[21:25:56] - Couldn't send HTTP request to server
[21:25:56] + Could not connect to Work Server (results)
[21:25:56] (171.67.108.22:80)
[21:25:56] - Error: Could not transmit unit 05 (completed August 10) to work server.
[21:25:56] - 2 failed uploads of this unit.
[21:25:56] + Attempting to send results [August 10 21:25:56 UTC]
[21:25:56] - Reading file work/wuresults_05.dat from core
[21:25:56] (Read 100226617 bytes from disk)
[21:25:56] Connecting to http://171.67.108.25:8080/
[21:26:36] Posted data.
[21:26:36] Initial: 0000; + Could not connect to Work Server (results)
[21:26:36] (171.67.108.25:8080)
[21:26:36] + Retrying using alternative port
[21:26:36] Connecting to http://171.67.108.25:80/
[21:27:33] Posted data.
[21:27:33] Initial: 0000; + Could not connect to Work Server (results)
[21:27:33] (171.67.108.25:80)
[21:27:33] Could not transmit unit 05 to Collection server; keeping in queue.
[21:27:33] + Sent 0 of 1 completed units to the server
[21:27:33] - Preparing to get new work unit...
[21:27:33] Cleaning up work directory
[21:27:33] + Attempting to get work packet
[21:27:33] Passkey found
[21:27:33] - Will indicate memory of 3070 MB
[21:27:33] - Connecting to assignment server
[21:27:33] Connecting to http://assign.stanford.edu:8080/
[21:27:34] Posted data.
[21:27:34] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[21:27:34] + News From Folding@Home: Welcome to Folding@Home
[21:27:35] Loaded queue successfully.
[21:27:35] Connecting to http://171.67.108.22:8080/
[21:27:43] Posted data.
[21:27:43] Initial: 0000; - Receiving payload (expected size: 24819258)
[21:27:56] + Could not get Work unit data from Work Server
[21:27:56] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[21:28:15] + Attempting to get work packet
[21:28:15] Passkey found
[21:28:15] - Will indicate memory of 3070 MB
[21:28:15] - Connecting to assignment server
[21:28:15] Connecting to http://assign.stanford.edu:8080/
[21:28:16] Posted data.
[21:28:16] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[21:28:16] + News From Folding@Home: Welcome to Folding@Home
[21:28:16] Loaded queue successfully.
[21:28:16] Connecting to http://171.67.108.22:8080/
[21:28:18] - Couldn't send HTTP request to server
[21:28:18] + Could not connect to Work Server
[21:28:18] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[21:28:31] + Attempting to get work packet
[21:28:31] Passkey found
[21:28:31] - Will indicate memory of 3070 MB
[21:28:31] - Connecting to assignment server
[21:28:31] Connecting to http://assign.stanford.edu:8080/
[21:28:32] Posted data.
[21:28:32] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[21:28:32] + News From Folding@Home: Welcome to Folding@Home
[21:28:32] Loaded queue successfully.
[21:28:32] Connecting to http://171.67.108.22:8080/
[21:28:33] - Couldn't send HTTP request to server
[21:28:33] + Could not connect to Work Server
[21:28:33] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[21:28:58] + Attempting to get work packet
[21:28:58] Passkey found
[21:28:58] - Will indicate memory of 3070 MB
[21:28:58] - Connecting to assignment server
[21:28:58] Connecting to http://assign.stanford.edu:8080/
[21:28:58] Posted data.
[21:28:58] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[21:28:58] + News From Folding@Home: Welcome to Folding@Home
[21:28:58] Loaded queue successfully.
[21:28:58] Connecting to http://171.67.108.22:8080/
[21:29:07] Posted data.
[21:29:07] Initial: 0000; - Receiving payload (expected size: 26640693)
[21:32:43] - Downloaded at ~120 kB/s
[21:32:43] - Averaged speed for that direction ~124 kB/s
[21:32:43] + Received work.
[21:32:43] Trying to send all finished work units
[21:32:43] Project: 2686 (Run 1, Clone 16, Gen 6)
[21:32:43] + Attempting to send results [August 10 21:32:43 UTC]
[21:32:43] - Reading file work/wuresults_05.dat from core
[21:32:43] (Read 100226617 bytes from disk)
[21:32:43] Connecting to http://171.67.108.22:8080/
[21:34:16] - Couldn't send HTTP request to server
[21:34:16] + Could not connect to Work Server (results)
[21:34:16] (171.67.108.22:8080)
[21:34:16] + Retrying using alternative port
[21:34:16] Connecting to http://171.67.108.22:80/
[21:34:17] - Couldn't send HTTP request to server
[21:34:17] + Could not connect to Work Server (results)
[21:34:17] (171.67.108.22:80)
[21:34:17] - Error: Could not transmit unit 05 (completed August 10) to work server.
[21:34:17] - 3 failed uploads of this unit.
[21:34:17] + Attempting to send results [August 10 21:34:17 UTC]
[21:34:17] - Reading file work/wuresults_05.dat from core
[21:34:17] (Read 100226617 bytes from disk)
[21:34:17] Connecting to http://171.67.108.25:8080/
[21:34:55] Posted data.
[21:34:55] Initial: 0000; + Could not connect to Work Server (results)
[21:34:55] (171.67.108.25:8080)
[21:34:55] + Retrying using alternative port
[21:34:55] Connecting to http://171.67.108.25:80/
[21:35:29] Posted data.
[21:35:29] Initial: 0000; + Could not connect to Work Server (results)
[21:35:29] (171.67.108.25:80)
[21:35:29] Could not transmit unit 05 to Collection server; keeping in queue.
[21:35:29] + Sent 0 of 1 completed units to the server
[21:35:29] + Closed connections
[21:35:29]
[21:35:29] + Processing work unit
[21:35:29] Core required: FahCore_a3.exe
[21:35:29] Core found.
[21:35:29] Working on queue slot 06 [August 10 21:35:29 UTC]
[21:35:29] + Working ...
[21:35:29] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 8 -checkpoint 30 -verbose -lifeline 2104 -version 629'
[21:35:30]
[21:35:30] *------------------------------*
[21:35:30] Folding@Home Gromacs SMP Core
[21:35:30] Version 2.22 (Mar 12, 2010)
[21:35:30]
[21:35:30] Preparing to commence simulation
[21:35:30] - Looking at optimizations...
[21:35:30] - Created dyn
[21:35:30] - Files status OK
[21:35:34] - Expanded 26640181 -> 32992881 (decompressed 123.8 percent)
[21:35:34] Called DecompressByteArray: compressed_data_size=26640181 data_size=32992881, decompressed_data_size=32992881 diff=0
[21:35:35] - Digital signature verified
[21:35:35]
[21:35:35] Project: 2685 (Run 6, Clone 5, Gen 13)
[21:35:35]
[21:35:35] Assembly optimizations on if available.
[21:35:35] Entering M.D.
[21:35:44] Completed 0 out of 250000 steps (0%)
[22:13:26] Completed 2500 out of 250000 steps (1%)
[22:51:27] Completed 5000 out of 250000 steps (2%)
[23:30:14] Completed 7500 out of 250000 steps (3%)
[00:08:19] Completed 10000 out of 250000 steps (4%)
[00:46:19] Completed 12500 out of 250000 steps (5%)
[01:23:29] Completed 15000 out of 250000 steps (6%)
[02:00:48] Completed 17500 out of 250000 steps (7%)
[02:03:19] Killing all core threads
[02:03:19] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown at user request.
[02:03:19] ***** Got a SIGTERM signal (2)
[02:03:19] Killing all core threads
[02:03:19] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown.
--- Opening Log file [August 11 02:03:24 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Folding\FAH1
Executable: D:\Folding\FAH1\fah6.exe
Arguments: -verbosity 9 -bigadv -smp
[02:03:24] - Ask before connecting: No
[02:03:24] - User name: caintry_boy (Team 32035)
[02:03:24] - User ID: 5AD45A266F37FFC8
[02:03:24] - Machine ID: 1
[02:03:24]
[02:03:24] Loaded queue successfully.
[02:03:24]
[02:03:24] - Autosending finished units... [August 11 02:03:24 UTC]
[02:03:24] + Processing work unit
[02:03:24] Trying to send all finished work units
[02:03:24] Core required: FahCore_a3.exe
[02:03:24] Project: 2686 (Run 1, Clone 16, Gen 6)
[02:03:24] Core found.
[02:03:24] + Attempting to send results [August 11 02:03:24 UTC]
[02:03:24] - Reading file work/wuresults_05.dat from core
[02:03:24] Working on queue slot 06 [August 11 02:03:24 UTC]
[02:03:24] + Working ...
[02:03:24] (Read 100226617 bytes from disk)
[02:03:24] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 8 -checkpoint 30 -verbose -lifeline 3008 -version 629'
[02:03:24] Connecting to http://171.67.108.22:8080/
[02:03:24]
[02:03:24] *------------------------------*
[02:03:24] Folding@Home Gromacs SMP Core
[02:03:24] Version 2.22 (Mar 12, 2010)
[02:03:24]
[02:03:24] Preparing to commence simulation
[02:03:24] - Ensuring status. Please wait.
[02:03:34] - Looking at optimizations...
[02:03:34] - Working with standard loops on this execution.
[02:03:34] - Previous termination of core was improper.
[02:03:34] - Files status OK
[02:03:39] - Expanded 26640181 -> 32992881 (decompressed 123.8 percent)
[02:03:39] Called DecompressByteArray: compressed_data_size=26640181 data_size=32992881, decompressed_data_size=32992881 diff=0
[02:03:39] - Digital signature verified
[02:03:39]
[02:03:39] Project: 2685 (Run 6, Clone 5, Gen 13)
[02:03:39]
[02:03:39] Entering M.D.
[02:03:45] Using Gromacs checkpoints
[02:03:52] Resuming from checkpoint
[02:03:52] Verified work/wudata_06.log
[02:03:53] Verified work/wudata_06.trr
[02:03:53] Verified work/wudata_06.xtc
[02:03:53] Verified work/wudata_06.edr
[02:03:54] Completed 15825 out of 250000 steps (6%)
[02:14:23] - Couldn't send HTTP request to server
[02:14:23] + Could not connect to Work Server (results)
[02:14:23] (171.67.108.22:8080)
[02:14:23] + Retrying using alternative port
[02:14:23] Connecting to http://171.67.108.22:80/
[02:14:24] - Couldn't send HTTP request to server
[02:14:24] + Could not connect to Work Server (results)
[02:14:24] (171.67.108.22:80)
[02:14:24] - Error: Could not transmit unit 05 (completed August 10) to work server.
[02:14:24] - 4 failed uploads of this unit.
[02:14:24] + Attempting to send results [August 11 02:14:24 UTC]
[02:14:24] - Reading file work/wuresults_05.dat from core
[02:14:24] (Read 100226617 bytes from disk)
[02:14:24] Connecting to http://171.67.108.25:8080/
[02:14:55] - Couldn't send HTTP request to server
[02:14:55] + Could not connect to Work Server (results)
[02:14:55] (171.67.108.25:8080)
[02:14:55] + Retrying using alternative port
[02:14:55] Connecting to http://171.67.108.25:80/
[02:15:25] - Couldn't send HTTP request to server
[02:15:25] + Could not connect to Work Server (results)
[02:15:25] (171.67.108.25:80)
[02:15:25] Could not transmit unit 05 to Collection server; keeping in queue.
[02:15:25] + Sent 0 of 1 completed units to the server
[02:15:25] - Autosend completed
[02:27:58] Completed 17500 out of 250000 steps (7%)
[03:03:48] Completed 20000 out of 250000 steps (8%)
[03:40:02] Completed 22500 out of 250000 steps (9%)
[04:16:26] Completed 25000 out of 250000 steps (10%)
[04:52:19] Completed 27500 out of 250000 steps (11%)
[05:11:45] Killing all core threads
[05:11:45] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown at user request.
[05:11:45] ***** Got a SIGTERM signal (2)
[05:11:45] Killing all core threads
[05:11:45] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown.
--- Opening Log file [August 11 05:11:53 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.29
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Folding\FAH1
Executable: D:\Folding\FAH1\fah6.exe
Arguments: -verbosity 9 -bigadv -smp
[05:11:53] - Ask before connecting: No
[05:11:53] - User name: caintry_boy (Team 32035)
[05:11:53] - User ID: 5AD45A266F37FFC8
[05:11:53] - Machine ID: 1
[05:11:53]
[05:11:53] Loaded queue successfully.
[05:11:53]
[05:11:53] - Autosending finished units... [August 11 05:11:53 UTC]
[05:11:53] + Processing work unit
[05:11:53] Trying to send all finished work units
[05:11:53] Core required: FahCore_a3.exe
[05:11:53] Project: 2686 (Run 1, Clone 16, Gen 6)
[05:11:53] Core found.
[05:11:53] + Attempting to send results [August 11 05:11:53 UTC]
[05:11:53] - Reading file work/wuresults_05.dat from core
[05:11:53] Working on queue slot 06 [August 11 05:11:53 UTC]
[05:11:53] + Working ...
[05:11:53] (Read 100226617 bytes from disk)
[05:11:53] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 8 -checkpoint 30 -verbose -lifeline 1344 -version 629'
[05:11:53] Connecting to http://171.67.108.22:8080/
[05:11:53]
[05:11:53] *------------------------------*
[05:11:53] Folding@Home Gromacs SMP Core
[05:11:53] Version 2.22 (Mar 12, 2010)
[05:11:53]
[05:11:53] Preparing to commence simulation
[05:11:53] - Ensuring status. Please wait.
[05:11:56] - Couldn't send HTTP request to server
[05:11:56] + Could not connect to Work Server (results)
[05:11:56] (171.67.108.22:8080)
[05:11:56] + Retrying using alternative port
[05:11:56] Connecting to http://171.67.108.22:80/
[05:11:57] - Couldn't send HTTP request to server
[05:11:57] + Could not connect to Work Server (results)
[05:11:57] (171.67.108.22:80)
[05:11:57] - Error: Could not transmit unit 05 (completed August 10) to work server.
[05:11:57] - 5 failed uploads of this unit.
[05:11:57] + Attempting to send results [August 11 05:11:57 UTC]
[05:11:57] - Reading file work/wuresults_05.dat from core
[05:11:57] (Read 100226617 bytes from disk)
[05:11:57] Connecting to http://171.67.108.25:8080/
[05:12:03] - Looking at optimizations...
[05:12:03] - Working with standard loops on this execution.
[05:12:03] - Previous termination of core was improper.
[05:12:03] - Going to use standard loops.
[05:12:03] - Files status OK
[05:12:07] - Expanded 26640181 -> 32992881 (decompressed 123.8 percent)
[05:12:07] Called DecompressByteArray: compressed_data_size=26640181 data_size=32992881, decompressed_data_size=32992881 diff=0
[05:12:08] - Digital signature verified
[05:12:08]
[05:12:08] Project: 2685 (Run 6, Clone 5, Gen 13)
[05:12:08]
[05:12:08] Entering M.D.
[05:12:14] Using Gromacs checkpoints
[05:12:21] Resuming from checkpoint
[05:12:21] Verified work/wudata_06.log
[05:12:21] Verified work/wudata_06.trr
[05:12:21] Verified work/wudata_06.xtc
[05:12:21] Verified work/wudata_06.edr
[05:12:23] Completed 28310 out of 250000 steps (11%)
[05:12:26] - Couldn't send HTTP request to server
[05:12:26] + Could not connect to Work Server (results)
[05:12:26] (171.67.108.25:8080)
[05:12:26] + Retrying using alternative port
[05:12:26] Connecting to http://171.67.108.25:80/
[05:12:57] Posted data.
[05:12:57] Initial: 0000; + Could not connect to Work Server (results)
[05:12:57] (171.67.108.25:80)
[05:12:57] Could not transmit unit 05 to Collection server; keeping in queue.
[05:12:57] + Sent 0 of 1 completed units to the server
[05:12:57] - Autosend completed
[05:38:02] Completed 30000 out of 250000 steps (12%)
[06:15:42] Completed 32500 out of 250000 steps (13%)
[06:51:40] Completed 35000 out of 250000 steps (14%)
[07:27:42] Completed 37500 out of 250000 steps (15%)
[08:03:39] Completed 40000 out of 250000 steps (16%)
[08:39:37] Completed 42500 out of 250000 steps (17%)
[09:15:34] Completed 45000 out of 250000 steps (18%)
[09:51:28] Completed 47500 out of 250000 steps (19%)
[10:27:20] Completed 50000 out of 250000 steps (20%)
[11:03:17] Completed 52500 out of 250000 steps (21%)
[11:12:57] - Autosending finished units... [August 11 11:12:57 UTC]
[11:12:57] Trying to send all finished work units
[11:12:57] Project: 2686 (Run 1, Clone 16, Gen 6)
[11:12:57] + Attempting to send results [August 11 11:12:57 UTC]
[11:12:57] - Reading file work/wuresults_05.dat from core
[11:12:58] (Read 100226617 bytes from disk)
[11:12:58] Connecting to http://171.67.108.22:8080/
[11:32:48] - Couldn't send HTTP request to server
[11:32:48] + Could not connect to Work Server (results)
[11:32:48] (171.67.108.22:8080)
[11:32:48] + Retrying using alternative port
[11:32:48] Connecting to http://171.67.108.22:80/
[11:32:50] - Couldn't send HTTP request to server
[11:32:50] + Could not connect to Work Server (results)
[11:32:50] (171.67.108.22:80)
[11:32:50] - Error: Could not transmit unit 05 (completed August 10) to work server.
[11:32:50] - 6 failed uploads of this unit.
[11:32:50] + Attempting to send results [August 11 11:32:50 UTC]
[11:32:50] - Reading file work/wuresults_05.dat from core
[11:32:50] (Read 100226617 bytes from disk)
[11:32:50] Connecting to http://171.67.108.25:8080/
[11:33:29] Posted data.
[11:33:29] Initial: 0000; + Could not connect to Work Server (results)
[11:33:29] (171.67.108.25:8080)
[11:33:29] + Retrying using alternative port
[11:33:29] Connecting to http://171.67.108.25:80/
[11:34:21] Posted data.
[11:34:21] Initial: 0000; + Could not connect to Work Server (results)
[11:34:21] (171.67.108.25:80)
[11:34:21] Could not transmit unit 05 to Collection server; keeping in queue.
[11:34:21] + Sent 0 of 1 completed units to the server
[11:34:21] - Autosend completed
[11:39:09] Completed 55000 out of 250000 steps (22%)
[12:15:10] Completed 57500 out of 250000 steps (23%)
Tried shutting down the client and restarting, thinking that it might get through, no show.....
Re: 503 error from 171.67.108.25
Posted: Thu Aug 12, 2010 12:51 am
by bruce
caintry_boy wrote:Reckon I missed the part where it wouldn't connect to 171.67.108.22:80 or :8080....
OK, that's something we can deal with. I notice that there are seven topics regarding 171.67.108.22 on the first page of this forum's topics. I'll change the title to match and start merging topics. I'll also be sure the Pande Group is aware of the problem.
Re: 171.67.108.22
Posted: Fri Aug 13, 2010 12:40 am
by Mactin
About my post, 3 messages up, that WU is still not credited almost 36 hours later....
70K+ points missing
Re: 171.67.108.22
Posted: Fri Aug 13, 2010 8:35 am
by kasson
Please see the other thread regarding 2682 work units during a 16-hour period. Your upload may not have been received by the server (despite appearances to the contrary).
viewtopic.php?f=19&t=15623&p=155032#p155032
Re: 171.67.108.22
Posted: Sat Aug 14, 2010 12:58 pm
by noorman
.
NO MORE WORK ?
Code: Select all
Launch directory: C:\Program Files\SMP
Executable: C:\Program Files\SMP\[email protected]
Arguments: -local -bigadv -forceasm -smp
[02:11:59] - Ask before connecting: No
[02:11:59] - User name: bwm (Team 50625)
[02:11:59] - User ID: 7085D00A7251E4CB
[02:11:59] - Machine ID: 3
[02:11:59]
[02:11:59] - Preparing to get new work unit...
[02:11:59] Cleaning up work directory
[02:11:59] + Attempting to get work packet
[02:11:59] Passkey found
[02:11:59] - Connecting to assignment server
[02:11:59] - Successful: assigned to (171.67.108.22).
[02:11:59] + News From Folding@Home: Welcome to Folding@Home
[02:12:00] Loaded queue successfully.
[02:12:00] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[02:12:06] + Attempting to get work packet
[02:12:06] Passkey found
[02:12:06] - Connecting to assignment server
[02:12:06] - Successful: assigned to (171.67.108.22).
[02:12:06] + News From Folding@Home: Welcome to Folding@Home
[02:12:06] Loaded queue successfully.
[02:12:07] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[02:12:19] + Attempting to get work packet
[02:12:19] Passkey found
[02:12:19] - Connecting to assignment server
[02:12:19] - Successful: assigned to (171.67.108.22).
[02:12:19] + News From Folding@Home: Welcome to Folding@Home
[02:12:20] Loaded queue successfully.
[02:12:20] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[02:12:42] + Attempting to get work packet
[02:12:42] Passkey found
[02:12:42] - Connecting to assignment server
[02:12:43] - Successful: assigned to (171.67.108.22).
[02:12:43] + News From Folding@Home: Welcome to Folding@Home
[02:12:43] Loaded queue successfully.
[02:12:43] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[02:13:37] + Attempting to get work packet
[02:13:37] Passkey found
[02:13:37] - Connecting to assignment server
[02:13:37] - Successful: assigned to (171.67.108.22).
[02:13:37] + News From Folding@Home: Welcome to Folding@Home
[02:13:38] Loaded queue successfully.
[02:13:38] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[02:15:02] + Attempting to get work packet
[02:15:02] Passkey found
[02:15:02] - Connecting to assignment server
[02:15:02] - Successful: assigned to (171.67.108.22).
[02:15:02] + News From Folding@Home: Welcome to Folding@Home
[02:15:02] Loaded queue successfully.
[02:15:03] - Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
.
.
Re: 171.67.108.22
Posted: Sat Aug 14, 2010 1:18 pm
by toTOW
If it's from the same guy that failed his p2682, I'm not surprised : I had the same issue after failing a p1682, and it took it up to a full day before the server decided to give out something else to this machine.
Re: 171.67.108.22
Posted: Sun Aug 15, 2010 10:07 pm
by brentpresley
I'm having the same issue too.
My SMP -24 rig barfed repeatedly on a 2682 and now the server has not given it any work.
Such a crying shame for a machine like that to sit idle.
Re: 171.67.108.22
Posted: Sun Aug 15, 2010 11:37 pm
by bruce
brentpresley wrote:Such a crying shame for a machine like that to sit idle.
I just came from the topic discussing the problems with server 171.64.65.56 where they're also having troubles getting and returning smp WUs. As I read psummary and serverstat, there's a general shortage of SMP WUs, though I don't understand why it seems so bad because one (and only one) server seems to have WUs .... and it's not that busy.
Does your -smp 24 machine have the required 0.5GB per core: (i.e.- 12 GB)? That seems to often be the cause for troubles with 2682. If not, then reduce the number of smp cores until you meet the 0.5 GB/core requirement and see if it will run (assuming you're assigned one again).
One logical thing to try is to remove -bigadv. You can probably get work to do and even get some good bonuses, even if they're somewhat less that bigadv. In fact, you could start 24 uniprocessor cores.
You're the one that's making the decision to leave your machine idle between now and whenever the shortage is resolved.
See also kasson's comment here: viewtopic.php?f=19&t=15681#p155536
Re: 171.67.108.22
Posted: Mon Aug 16, 2010 12:34 am
by brentpresley
Yes, the machine is LOADED to the hilt.
RAM - not a problem. 12GB
Cores - not a problem. 12 real, 12 virtual.
Stability - not a problem. 4.05GHz for 3 months now. Never a hiccup, and there is headroom to spare.
The 2682 errors out because the A3 core cannot allocate > 4GB for systems with more than 16 cores.
But I went to SMP -16 and it errored out anyway. Now it just sits there IDLE (sorry, as a physician I don't have time to babysit it). So I have moved it to regular A3s for the next 24h or so.
Re: 171.67.108.22
Posted: Mon Aug 16, 2010 2:58 am
by codysluder
brentpresley wrote:The 2682 errors out because the A3 core cannot allocate > 4GB for systems with more than 16 cores.
Why is that?
Re: 171.67.108.22
Posted: Mon Aug 16, 2010 4:19 am
by Napoleon
FahCore_A3.exe is a 32bit process, and one 32bit process is limited to 4GB even on 64bit systems. Check e.g
Poll: -bigadv on a 32bit system? again.
Re: 171.67.108.22
Posted: Mon Aug 16, 2010 6:20 am
by 7im
Napoleon wrote:FahCore_A3.exe is a 32bit process, and one 32bit process is limited to 4GB even on 64bit systems. Check e.g
Poll: -bigadv on a 32bit system? again.
Yep, and only 2 to 3 GB in Win 32.
http://msdn.microsoft.com/en-us/library ... ory_limits
Re: 171.67.108.22
Posted: Mon Aug 16, 2010 12:23 pm
by toTOW
There's a long thread about the issue here : viewtopic.php?f=55&t=15563
Re: 171.67.108.22
Posted: Wed Aug 18, 2010 9:26 am
by noorman
.
Not giving out any Work again ...
Code: Select all
[06:01:55] *------------------------------*
[06:01:55] Folding@Home Gromacs SMP Core
[06:01:55] Version 2.22 (Mar 12, 2010)
[06:01:55]
[06:01:55] Preparing to commence simulation
[06:01:55] - Looking at optimizations...
[06:01:55] - Created dyn
[06:01:55] - Files status OK
[06:03:11] - Expanded 29569771 -> 156321221 (decompressed 92.9 percent)
[06:03:11] Called DecompressByteArray: compressed_data_size=29569771 data_size=156321221, decompressed_data_size=156321221 diff=0
[06:03:11] - Digital signature verified
[06:03:11]
[06:03:11] Project: 2682 (Run 1, Clone 19, Gen 22)
[06:03:11]
[06:03:13] Assembly optimizations on if available.
[06:03:13] Entering M.D.
[06:03:31] Gromacs cannot continue further.
[06:03:31] Going to send back what have done -- stepsTotalG=250000
[06:03:31] Work fraction=0.0000 steps=250000.
[06:03:33] CoreStatus = C0000005 (-1073741819)
[06:03:33] Client-core communications error: ERROR 0xc0000005
[06:03:33] Deleting current work unit & continuing...
[06:03:49] - Preparing to get new work unit...
[06:03:49] Cleaning up work directory
[06:03:49] + Attempting to get work packet
[06:03:49] Passkey found
[06:03:49] - Connecting to assignment server
[06:03:49] - Successful: assigned to (171.67.108.22).
[06:03:49] + News From Folding@Home: Welcome to Folding@Home
[06:03:49] Loaded queue successfully.
[06:03:50] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[06:03:55] + Attempting to get work packet
[06:03:55] Passkey found
[06:03:55] - Connecting to assignment server
[06:03:56] - Successful: assigned to (171.67.108.22).
[06:03:56] + News From Folding@Home: Welcome to Folding@Home
[06:03:56] Loaded queue successfully.
[06:03:57] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[06:04:14] + Attempting to get work packet
[06:04:14] Passkey found
[06:04:14] - Connecting to assignment server
[06:04:14] - Successful: assigned to (171.67.108.22).
[06:04:14] + News From Folding@Home: Welcome to Folding@Home
[06:04:15] Loaded queue successfully.
[06:04:16] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[06:04:37] + Attempting to get work packet
[06:04:37] Passkey found
[06:04:37] - Connecting to assignment server
[06:04:38] - Successful: assigned to (171.67.108.22).
[06:04:38] + News From Folding@Home: Welcome to Folding@Home
[06:04:38] Loaded queue successfully.
[06:04:39] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[06:05:21] + Attempting to get work packet
[06:05:21] Passkey found
[06:05:21] - Connecting to assignment server
[06:05:22] - Successful: assigned to (171.67.108.22).
[06:05:22] + News From Folding@Home: Welcome to Folding@Home
[06:05:22] Loaded queue successfully.
[06:05:23] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[06:06:54] + Attempting to get work packet
[06:06:54] Passkey found
[06:06:54] - Connecting to assignment server
[06:06:55] - Successful: assigned to (171.67.108.22).
[06:06:55] + News From Folding@Home: Welcome to Folding@Home
[06:06:55] Loaded queue successfully.
[06:06:56] - Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
[06:09:41] + Attempting to get work packet
[06:09:41] Passkey found
[06:09:41] - Connecting to assignment server
[06:09:42] - Successful: assigned to (171.67.108.22).
[06:09:42] + News From Folding@Home: Welcome to Folding@Home
[06:09:42] Loaded queue successfully.
[06:09:43] - Attempt #7 to get work failed, and no other work to do.
Waiting before retry.
[06:15:08] + Attempting to get work packet
[06:15:08] Passkey found
[06:15:08] - Connecting to assignment server
[06:15:09] - Successful: assigned to (171.67.108.22).
[06:15:09] + News From Folding@Home: Welcome to Folding@Home
[06:15:09] Loaded queue successfully.
[06:15:10] - Attempt #8 to get work failed, and no other work to do.
Waiting before retry.
[06:25:51] + Attempting to get work packet
[06:25:51] Passkey found
[06:25:51] - Connecting to assignment server
[06:25:51] - Successful: assigned to (171.67.108.22).
[06:25:51] + News From Folding@Home: Welcome to Folding@Home
[06:25:51] Loaded queue successfully.
[06:25:52] - Attempt #9 to get work failed, and no other work to do.
Waiting before retry.
[06:47:17] + Attempting to get work packet
[06:47:17] Passkey found
[06:47:17] - Connecting to assignment server
[06:47:18] - Successful: assigned to (171.67.108.22).
[06:47:18] + News From Folding@Home: Welcome to Folding@Home
[06:47:18] Loaded queue successfully.
[06:47:19] - Attempt #10 to get work failed, and no other work to do.
Waiting before retry.
[07:30:00] + Attempting to get work packet
[07:30:00] Passkey found
[07:30:00] - Connecting to assignment server
[07:30:00] - Successful: assigned to (171.67.108.22).
[07:30:00] + News From Folding@Home: Welcome to Folding@Home
[07:30:00] Loaded queue successfully.
[07:30:01] - Attempt #11 to get work failed, and no other work to do.
Waiting before retry.
.
.