130.49.240.81 and 130.49.240.77

dsmguy · Post by **dsmguy** » Fri May 15, 2009 2:38 pm

I'm running 6.23 tray client. I have CA security center. I can see in the firewall log that the connection is allowed. I've turned off the spyware and snoozed the virus checker.

Here are some log entries that I think are usually requested. Any help would be greatly appreciated

[14:02:53] - Ask before connecting: No
[14:02:53] - User name: edsguy-lp (Team 42263)
[14:02:53] - User ID: 5514B7EE6EECB65D
[14:02:53] - Machine ID: 1
[14:02:53]
[14:02:53] Loaded queue successfully.
[14:02:53] Initialization complete
[14:02:55]
[14:02:55] + Processing work unit
[14:02:55] Core required: FahCore_7c.exe
[14:02:55] Project: 897 (Run 1, Clone 249, Gen 20)
[14:02:55] Core found.

[14:28:26] - Files status OK
[14:28:26] - Expande- Couldn't send HTTP request to server
[14:28:26] + Could not connect to Work Server (results)
[14:28:26] (130.49.240.77:80)
[14:28:26] Could not transmit unit 01 to Collection server; keeping in queue.
[14:28:26] Project: 3861 (Run 33, Clone 9, Gen 6)

[14:28:26] + Attempting to send results [May 15 14:28:26 UTC]
[14:28:26] - Couldn't send HTTP request to server
[14:28:26] + Could not connect to Work Server (results)
[14:28:26] (128.143.48.226:8080)
[14:28:26] + Retrying using alternative port
[14:28:26] - Couldn't send HTTP request to server
[14:28:26] + Could not connect to Work Server (results)
[14:28:26] (128.143.48.226:80)
[14:28:26] - Error: Could not transmit unit 02 (completed May 15) to work server.

[14:28:26] + Attempting to send results [May 15 14:28:26 UTC]
[14:28:27] - Couldn't send HTTP request to server
[14:28:27] + Could not connect to Work Server (results)
[14:28:27] (128.143.48.227:8080)
[14:28:27] + Retrying using alternative port
[14:28:27] - Couldn't send HTTP request to server
[14:28:27] + Could not connect to Work Server (results)
[14:28:27] (128.143.48.227:80)
[14:28:27] Could not transmit unit 02 to Collection server; keeping in queue.

tbk-aracthebold · Post by **tbk-aracthebold** » Fri May 15, 2009 3:13 pm

Hi,

Welcome to the forum.

I checked the sever stats and both the severs are working. Try this type the sever IP into the address bar of your browser and see if you get and OK. The IP you want to check is 128.143.48.227

dsmguy · Post by **dsmguy** » Fri May 15, 2009 3:19 pm

Yes, I can open 130.49.240.77, 128.143.48.226 and 128.143.48.227. Get the OK screen.

7im · Post by **7im** » Fri May 15, 2009 3:34 pm

Sometimes the servers get busy, but I'm concerned that both the work server and backup collection server couldn't connect to to your system. Any chance you could disable the firewall temporarily to test the connection?

dsmguy · Post by **dsmguy** » Fri May 15, 2009 3:43 pm

So, I've suspended virus and disabled the firewall. Stopped and started the client. Log still shows no go. Is the communication one way, from my system to the server? Or does the server reach back to grab the file?

bollix47 · Post by **bollix47** » Fri May 15, 2009 3:56 pm

Communication in this sense is always two-way. Your client sends a packet of information to the server and that server sends back an acknowledgement(ACK) that it received the packet. So, your internet setup must allow access in both directions.

Post by **bruce** » Fri May 15, 2009 4:45 pm

bollix47 wrote:Communication in this sense is always two-way. Your client sends a packet of information to the server and that server sends back an acknowledgement(ACK) that it received the packet. So, your internet setup must allow access in both directions.

True, but many firewalls block local software from initiating a new connection. Your browser is always given permission to contact the internet (you trust it, right?). Once the connection is established, it is a 2-way connection. If a piece of spyware manages to install itself without your knowledge, it is NOT given the rights to extablish a connection -- and the firewall is doing what it was designed to do.

Then when you install FAH, you have to inform your firewall that you trust the fah software and it should be allowed to establish a connection with Stanford.

(Not all firewalls protect against spyware like this. e-g- The Windows firewall does not.)

dsmguy · Post by **dsmguy** » Fri May 15, 2009 4:51 pm

So, like I said, my firewall has [email protected] approved. I've tried with all virus, spyware and firewall turned off. Still will not send the packets.

dsmguy · Post by **dsmguy** » Mon May 18, 2009 12:42 pm

Here's and update. Finished a 3rd unit and it was successfully uploaded this morning. BUT the other two are still trying. Unit 1 has 54 failed uploads and Unit 2 has 24 failed.

10:43:35] Finished Work Unit:
[10:43:35] - Reading up to 411952 from "work/wudata_03.trr": Read 411952
[10:43:35] - Reading up to 27696 from "work/wudata_03.xtc": Read 27696
[10:43:35] xvg file size: 1003788
[10:43:35] logfile size: 67518
[10:43:35] Leaving Run
[10:43:36] - Writing 1613974 bytes of core data to disk...
[10:43:37] Done: 1613462 -> 798831 (compressed to 49.5 percent)
[10:43:37] ... Done.
[10:43:37] - Shutting down core
[10:43:37]
[10:43:37] Folding@home Core Shutdown: FINISHED_UNIT
[10:43:39] CoreStatus = 64 (100)
[10:43:39] Sending work to server
[10:43:39] Project: 3863 (Run 425, Clone 12, Gen 3)

[10:43:39] + Attempting to send results [May 18 10:43:39 UTC]
[10:43:53] + Results successfully sent
[10:43:53] Thank you for your contribution to Folding@Home.
[10:43:53] + Starting local stats count at 1
[10:43:57] Project: 897 (Run 1, Clone 249, Gen 20)

[10:43:57] + Attempting to send results [May 18 10:43:57 UTC]
[10:43:57] - Couldn't send HTTP request to server
[10:43:57] + Could not connect to Work Server (results)
[10:43:57] (130.49.240.81:8080)
[10:43:57] + Retrying using alternative port
[10:43:58] - Couldn't send HTTP request to server
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (130.49.240.81:80)
[10:43:58] - Error: Could not transmit unit 01 (completed May 9) to work server.

[10:43:58] + Attempting to send results [May 18 10:43:58 UTC]
[10:43:58] - Couldn't send HTTP request to server
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (130.49.240.77:8080)
[10:43:58] + Retrying using alternative port
[10:43:58] - Couldn't send HTTP request to server
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (130.49.240.77:80)
[10:43:58] Could not transmit unit 01 to Collection server; keeping in queue.
[10:43:58] Project: 3861 (Run 33, Clone 9, Gen 6)

[10:43:58] + Attempting to send results [May 18 10:43:58 UTC]
[10:43:58] - Couldn't send HTTP request to server
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (128.143.48.226:8080)
[10:43:58] + Retrying using alternative port
[10:43:58] - Couldn't send HTTP request to server
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (128.143.48.226:80)
[10:43:58] - Error: Could not transmit unit 02 (completed May 15) to work server.

[10:43:58] + Attempting to send results [May 18 10:43:58 UTC]
[10:43:58] - Couldn't send HTTP request to server
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (128.143.48.227:8080)
[10:43:58] + Retrying using alternative port
[10:43:58] - Couldn't send HTTP request to server
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (128.143.48.227:80)
[10:43:58] Could not transmit unit 02 to Collection server; keeping in queue.
[10:43:58] - Preparing to get new work unit...
[10:43:58] + Attempting to get work packet
[10:43:58] - Connecting to assignment server
[10:43:58] - Successful: assigned to (128.143.48.226).
[10:43:58] + News From Folding@Home: Welcome to Folding@Home
[10:43:58] Loaded queue successfully.
[10:44:00] Project: 897 (Run 1, Clone 249, Gen 20)

Post by **bruce** » Mon May 18, 2009 2:20 pm

dsmguy wrote:Here's and update.

[10:43:57] + Could not connect to Work Server (results)
[10:43:57] (130.49.240.81:8080)
[10:43:58] (130.49.240.77:8080)
[10:43:58] Could not transmit unit 01 to Collection server; keeping in queue.
[10:43:58] + Could not connect to Work Server (results)
[10:43:58] (128.143.48.226:8080)
[10:43:58] (128.143.48.227:8080)
[10:43:58] Could not transmit unit 02 to Collection server; keeping in queue

The server status page (see link at the top of this page) reports that both work servers seem fine so it's probably just a matter of being patient. Unfortunately the two Collection Servers don't show on the server status page.

extrasalty · Post by **extrasalty** » Mon May 18, 2009 3:49 pm

Although, this is Linux, check here: viewtopic.php?f=44&t=9830.

dsmguy · Post by **dsmguy** » Thu Jun 11, 2009 10:13 pm

Still have this on-going problem. I've uploaded a few completed but 167 and 137 tries on my May 9 and May 15 are really irking me.

Here is the latest log

# Windows CPU Systray Edition #################################################
###############################################################################

Folding@Home Client Version 6.23

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Documents and Settings\jim\Application Data\Folding@home-x86
Arguments: -verbosity 9

[21:55:23] - Ask before connecting: No
[21:55:23] - User name: edsguy-lp (Team 42263)
[21:55:23] - User ID: 5514B7EE6EECB65D
[21:55:23] - Machine ID: 1
[21:55:23]
[21:55:23] Loaded queue successfully.
[21:55:23] Initialization complete
[21:55:23]
[21:55:23] + Processing work unit
[21:55:23] Core required: FahCore_7c.exe
[21:55:23] - Autosending finished units... [June 11 21:55:23 UTC]
[21:55:23] Trying to send all finished work units
[21:55:23] Project: 897 (Run 1, Clone 249, Gen 20)
[21:55:23] Core found.

[21:55:23] + Attempting to send results [June 11 21:55:23 UTC]
[21:55:23] - Reading file work/wuresults_01.dat from core
[21:55:23] (Read 3944353 bytes from disk)
[21:55:23] Connecting to http://130.49.240.81:8080/
[21:55:23] Working on queue slot 09 [June 11 21:55:23 UTC]
[21:55:23] + Working ...
[21:55:23] - Calling '.\FahCore_7c.exe -dir work/ -suffix 09 -cpu 66 -checkpoint 19 -verbose -lifeline 2320 -version 623'

[21:55:24] - Couldn't send HTTP request to server
[21:55:24] + Could not connect to Work Server (results)
[21:55:24] (130.49.240.81:8080)
[21:55:24] + Retrying using alternative port
[21:55:24] Connecting to http://130.49.240.81:80/
[21:55:25]
[21:55:25] *------------------------------*
[21:55:25] Folding@Home Double Gromacs Core C
[21:55:25] Version 1.00 (Thu Apr 24 19:12:09 PDT 2008)
[21:55:25]
[21:55:25] Preparing to commence simulation
[21:55:25] - Files status OK
[21:55:25] - Expanded 234680 -> 641836 (decompressed 273.4 percent)
[21:55:25]
[21:55:25] Project: 3863 (Run 194, Clone 15, Gen 7)
[21:55:25]
[21:55:26] Assembly optimizations on if available.
[21:55:26] Entering M.D.
[21:55:31] - Couldn't send HTTP request to server
[21:55:31] + Could not connect to Work Server (results)
[21:55:31] (130.49.240.81:80)
[21:55:31] - Error: Could not transmit unit 01 (completed May 9) to work server.
[21:55:31] - 167 failed uploads of this unit.

[21:55:31] + Attempting to send results [June 11 21:55:31 UTC]
[21:55:31] - Reading file work/wuresults_01.dat from core
[21:55:31] (Read 3944353 bytes from disk)
[21:55:31] Connecting to http://130.49.240.77:8080/
[21:55:31] - Couldn't send HTTP request to server
[21:55:31] + Could not connect to Work Server (results)
[21:55:31] (130.49.240.77:8080)
[21:55:31] + Retrying using alternative port
[21:55:31] Connecting to http://130.49.240.77:80/
[21:55:31] - Couldn't send HTTP request to server
[21:55:31] + Could not connect to Work Server (results)
[21:55:31] (130.49.240.77:80)
[21:55:31] Could not transmit unit 01 to Collection server; keeping in queue.
[21:55:31] Project: 3861 (Run 33, Clone 9, Gen 6)

[21:55:31] + Attempting to send results [June 11 21:55:31 UTC]
[21:55:31] - Reading file work/wuresults_02.dat from core
[21:55:31] (Read 1112402 bytes from disk)
[21:55:31] Connecting to http://128.143.48.226:8080/
[21:55:31] - Couldn't send HTTP request to server
[21:55:31] + Could not connect to Work Server (results)
[21:55:31] (128.143.48.226:8080)
[21:55:31] + Retrying using alternative port
[21:55:31] Connecting to http://128.143.48.226:80/
[21:55:31] - Couldn't send HTTP request to server
[21:55:31] + Could not connect to Work Server (results)
[21:55:31] (128.143.48.226:80)
[21:55:31] - Error: Could not transmit unit 02 (completed May 15) to work server.
[21:55:31] - 137 failed uploads of this unit.

[21:55:31] + Attempting to send results [June 11 21:55:31 UTC]
[21:55:31] - Reading file work/wuresults_02.dat from core
[21:55:32] (Read 1112402 bytes from disk)
[21:55:32] Connecting to http://128.143.48.227:8080/
[21:55:32] Will resume from checkpoint file
[21:55:32] Working on p3863_fkbprelative_ligand
[21:55:32] Completed 0 out of 1500000 steps (0%)
[21:55:32] Extra SSE2 boost OK
[21:55:34] Resuming from checkpoint
[21:55:34] Verified work/wudata_09.log
[21:55:34] Verified work/wudata_09.edr
[21:55:34] Verified work/wudata_09.xvg
[21:55:34] Verified work/wudata_09.trr
[21:55:34] Verified work/wudata_09.xtc
[21:55:34] Completed 135001 out of 1500000 steps (9%)
[21:55:52] - Couldn't send HTTP request to server
[21:55:52] + Could not connect to Work Server (results)
[21:55:52] (128.143.48.227:8080)
[21:55:52] + Retrying using alternative port
[21:55:52] Connecting to http://128.143.48.227:80/
[21:56:13] - Couldn't send HTTP request to server
[21:56:13] + Could not connect to Work Server (results)
[21:56:13] (128.143.48.227:80)
[21:56:13] Could not transmit unit 02 to Collection server; keeping in queue.
[21:56:13] Project: 3860 (Run 377, Clone 11, Gen 5)

[21:56:13] + Attempting to send results [June 11 21:56:13 UTC]
[21:56:13] - Reading file work/wuresults_06.dat from core
[21:56:15] (Read 2429520 bytes from disk)
[21:56:15] Connecting to http://128.143.48.226:8080/
[21:56:16] - Couldn't send HTTP request to server
[21:56:16] + Could not connect to Work Server (results)
[21:56:16] (128.143.48.226:8080)
[21:56:16] + Retrying using alternative port
[21:56:16] Connecting to http://128.143.48.226:80/
[21:56:16] - Couldn't send HTTP request to server
[21:56:16] + Could not connect to Work Server (results)
[21:56:16] (128.143.48.226:80)
[21:56:16] - Error: Could not transmit unit 06 (completed May 31) to work server.
[21:56:16] - 57 failed uploads of this unit.

[21:56:16] + Attempting to send results [June 11 21:56:16 UTC]
[21:56:16] - Reading file work/wuresults_06.dat from core
[21:56:16] (Read 2429520 bytes from disk)
[21:56:16] Connecting to http://128.143.48.227:8080/
[21:56:39] - Couldn't send HTTP request to server
[21:56:39] + Could not connect to Work Server (results)
[21:56:39] (128.143.48.227:8080)
[21:56:39] + Retrying using alternative port
[21:56:39] Connecting to http://128.143.48.227:80/
[21:57:00] - Couldn't send HTTP request to server
[21:57:00] + Could not connect to Work Server (results)
[21:57:00] (128.143.48.227:80)
[21:57:00] Could not transmit unit 06 to Collection server; keeping in queue.
[21:57:00] Project: 3860 (Run 314, Clone 19, Gen 2)

[21:57:00] + Attempting to send results [June 11 21:57:00 UTC]
[21:57:00] - Reading file work/wuresults_08.dat from core
[21:57:01] (Read 2560137 bytes from disk)
[21:57:01] Connecting to http://128.143.48.226:8080/
[21:57:01] - Couldn't send HTTP request to server
[21:57:01] + Could not connect to Work Server (results)
[21:57:01] (128.143.48.226:8080)
[21:57:01] + Retrying using alternative port
[21:57:01] Connecting to http://128.143.48.226:80/
[21:57:01] - Couldn't send HTTP request to server
[21:57:01] + Could not connect to Work Server (results)
[21:57:01] (128.143.48.226:80)
[21:57:01] - Error: Could not transmit unit 08 (completed June 11) to work server.
[21:57:01] - 5 failed uploads of this unit.

[21:57:01] + Attempting to send results [June 11 21:57:01 UTC]
[21:57:01] - Reading file work/wuresults_08.dat from core
[21:57:01] (Read 2560137 bytes from disk)
[21:57:01] Connecting to http://128.143.48.227:8080/
[21:57:22] - Couldn't send HTTP request to server
[21:57:22] + Could not connect to Work Server (results)
[21:57:22] (128.143.48.227:8080)
[21:57:22] + Retrying using alternative port
[21:57:22] Connecting to http://128.143.48.227:80/
[21:57:43] - Couldn't send HTTP request to server
[21:57:43] + Could not connect to Work Server (results)
[21:57:43] (128.143.48.227:80)
[21:57:43] Could not transmit unit 08 to Collection server; keeping in queue.
[21:57:43] + Sent 0 of 4 completed units to the server
[21:57:43] - Autosend completed

Post by **bruce** » Fri Jun 12, 2009 2:10 am

dsmguy wrote:Still have this on-going problem. I've uploaded a few completed but 167 and 137 tries on my May 9 and May 15 are really irking me.

[21:55:24] 130.49.240.81
[21:55:31] - 167 failed uploads of this unit.
[21:55:31] 130.49.240.77
[21:55:31] Could not transmit unit 01 to Collection server; keeping in queue.

[21:55:31] 128.143.48.226
[21:55:31] - 137 failed uploads of this unit.
[21:55:52] 128.143.48.227
[21:56:13] Could not transmit unit 02 to Collection server; keeping in queue.

[21:56:16] 128.143.48.226
[21:56:16] - 57 failed uploads of this unit.
[21:57:00] 128.143.48.227
[21:57:00] Could not transmit unit 06 to Collection server; keeping in queue.

[21:57:01] 128.143.48.226
[21:57:01] - 5 failed uploads of this unit.
[21:57:22] 128.143.48.227
[21:57:43] Could not transmit unit 08 to Collection server; keeping in queue.

There are two types of problems -- ones in which you cannot connect to any server and one in which you cannot reach a particular server.

In cases where you cannot connect to any server, it's likely your firewall. We already went through that process last month and apparently you're able to get new WUs so you are able to establish connections, just not with the servers that these WU belong to.

In cases were it's just one server, there's a pretty good chance you're not having the problem, the server is. When you suspect it's a server problem, you should always try opening the IP address in your browser and if then post in the forum for problems with a particular server. In this case, servers 130.49.240.* are down. (You'll find that information in that forum.) Similarly, I cannot get the "OK" message from 128.143.48.227 although 128.143.48.226 seems to be working. The next thing I'm going to do is check that forum and see if there is a report regarding either of those servers.

In any case, it's not really a problem with the Windows uniprocessor client, so I'm going to move this discussion topic to the server forum.

boscoj · Post by **boscoj** » Fri Jun 12, 2009 7:20 pm

I see 171.67.108.11 is rejecting but 171.67.108.25 appears to be up . . .

Code: Select all

[17:26:07] + Attempting to send results [June 12 17:26:07 UTC]
[17:26:08] - Couldn't send HTTP request to server
[17:26:08] + Could not connect to Work Server (results)
[17:26:08]     (171.67.108.11:8080)
[17:26:08] + Retrying using alternative port
[17:26:09] - Couldn't send HTTP request to server
[17:26:09] + Could not connect to Work Server (results)
[17:26:09]     (171.67.108.11:80)
[17:26:09] - Error: Could not transmit unit 06 (completed June 12) to work server.
[17:26:09]   Keeping unit 06 in queue.
[17:26:09] Project: 5756 (Run 11, Clone 271, Gen 94)


[17:26:09] + Attempting to send results [June 12 17:26:09 UTC]
[17:26:10] - Couldn't send HTTP request to server
[17:26:10] + Could not connect to Work Server (results)
[17:26:10]     (171.67.108.11:8080)
[17:26:10] + Retrying using alternative port
[17:26:11] - Couldn't send HTTP request to server
[17:26:11] + Could not connect to Work Server (results)
[17:26:11]     (171.67.108.11:80)
[17:26:11] - Error: Could not transmit unit 06 (completed June 12) to work server.


[17:26:11] + Attempting to send results [June 12 17:26:11 UTC]
[17:26:11] - Couldn't send HTTP request to server
[17:26:11]   (Got status 503)
[17:26:11] + Could not connect to Work Server (results)
[17:26:11]     (171.67.108.25:8080)
[17:26:11] + Retrying using alternative port
[17:26:11] - Couldn't send HTTP request to server
[17:26:11]   (Got status 503)
[17:26:11] + Could not connect to Work Server (results)
[17:26:11]     (171.67.108.25:80)
[17:26:11]   Could not transmit unit 06 to Collection server; keeping in queue.
[17:26:11] - Preparing to get new work unit...
[17:26:11] + Attempting to get work packet
[17:26:11] - Connecting to assignment server
[17:26:12] - Successful: assigned to (171.64.122.70).
[17:26:12] + News From Folding@Home: Welcome to Folding@Home
[17:26:12] Loaded queue successfully.
[17:26:12] Project: 5756 (Run 11, Clone 271, Gen 94)


[17:26:12] + Attempting to send results [June 12 17:26:12 UTC]
[17:26:13] - Couldn't send HTTP request to server
[17:26:13] + Could not connect to Work Server (results)
[17:26:13]     (171.67.108.11:8080)
[17:26:13] + Retrying using alternative port
[17:26:14] - Couldn't send HTTP request to server
[17:26:14] + Could not connect to Work Server (results)
[17:26:14]     (171.67.108.11:80)
[17:26:14] - Error: Could not transmit unit 06 (completed June 12) to work server.


[17:26:14] + Attempting to send results [June 12 17:26:14 UTC]
[17:26:14] - Couldn't send HTTP request to server
[17:26:14]   (Got status 503)
[17:26:14] + Could not connect to Work Server (results)
[17:26:14]     (171.67.108.25:8080)
[17:26:14] + Retrying using alternative port
[17:26:14] - Couldn't send HTTP request to server
[17:26:14]   (Got status 503)
[17:26:14] + Could not connect to Work Server (results)
[17:26:14]     (171.67.108.25:80)
[17:26:14]   Could not transmit unit 06 to Collection server; keeping in queue.
[17:26:14] + Closed connections
[17:26:14] 
[17:26:14] + Processing work unit
[17:26:14] Core required: FahCore_14.exe
[17:26:14] Core found.
[17:26:14] Working on queue slot 07 [June 12 17:26:14 UTC]
[17:26:14] + Working ...
[17:26:14] 
[17:26:14] *------------------------------*
[17:26:14] Folding@Home GPU Core - Beta
[17:26:14] Version 1.25 (Mon Mar 2 19:49:32 PST 2009)
[17:26:14] 
[17:26:14] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[17:26:14] Build host: vspm46
[17:26:14] Board Type: Nvidia
[17:26:14] Core      : 
[17:26:14] Preparing to commence simulation
[17:26:14] - Looking at optimizations...
[17:26:14] - Created dyn
[17:26:14] - Files status OK
[17:26:14] - Expanded 70277 -> 360060 (decompressed 512.3 percent)
[17:26:14] Called DecompressByteArray: compressed_data_size=70277 data_size=360060, decompressed_data_size=360060 diff=0
[17:26:14] - Digital signature verified
[17:26:14] 
[17:26:14] Project: 5906 (Run 9, Clone 39, Gen 3)
[17:26:14] 
[17:26:14] Assembly optimizations on if available.
[17:26:14] Entering M.D.
[17:26:20] Tpr hash work/wudata_07.tpr:  1786069341 3499366967 1575798890 3351115706 1374819381
[17:26:21] Working on Protein
[17:26:22] Client config found, loading data.
[17:26:22] Starting GUI Server
[17:27:22] Completed 1%
[17:28:56] Completed 2%
[17:30:28] Completed 3%
[17:31:59] Completed 4%
[17:33:33] Completed 5%
[17:35:07] Completed 6%
[17:36:37] Completed 7%
[17:38:10] Completed 8%
[17:39:43] Completed 9%
[17:41:13] Completed 10%
[17:42:45] Completed 11%
[17:44:18] Completed 12%
[17:45:51] Completed 13%
[17:47:25] Completed 14%
[17:48:55] Completed 15%
[17:50:27] Completed 16%
[17:51:59] Completed 17%
[17:53:31] Completed 18%
[17:55:04] Completed 19%
[17:56:44] Completed 20%
[17:58:14] Completed 21%
[17:59:44] Completed 22%
[18:00:06] Project: 5756 (Run 11, Clone 271, Gen 94)


[18:00:06] + Attempting to send results [June 12 18:00:06 UTC]
[18:00:07] - Couldn't send HTTP request to server
[18:00:07] + Could not connect to Work Server (results)
[18:00:07]     (171.67.108.11:8080)
[18:00:07] + Retrying using alternative port
[18:00:08] - Couldn't send HTTP request to server
[18:00:08] + Could not connect to Work Server (results)
[18:00:08]     (171.67.108.11:80)
[18:00:08] - Error: Could not transmit unit 06 (completed June 12) to work server.


[18:00:08] + Attempting to send results [June 12 18:00:08 UTC]
[18:00:08] - Couldn't send HTTP request to server
[18:00:08]   (Got status 503)
[18:00:08] + Could not connect to Work Server (results)
[18:00:08]     (171.67.108.25:8080)
[18:00:08] + Retrying using alternative port
[18:00:08] - Couldn't send HTTP request to server
[18:00:08]   (Got status 503)
[18:00:08] + Could not connect to Work Server (results)
[18:00:08]     (171.67.108.25:80)
[18:00:08]   Could not transmit unit 06 to Collection server; keeping in queue.
[18:00:08] + Working...
[18:01:18] Completed 23%
[18:02:49] Completed 24%

dsmguy · Post by **dsmguy** » Fri Jun 19, 2009 8:17 pm

Looks like 130.49.240.81 is down and i'm not sure I read the status for 130.49.240.77

Here is the latest log. Wish I could get these four in.

# Windows CPU Systray Edition #################################################
###############################################################################

Folding@Home Client Version 6.23

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Documents and Settings\jim\Application Data\Folding@home-x86
Arguments: -verbosity 9

[20:05:03] - Ask before connecting: No
[20:05:03] - User name: edsguy-lp (Team 42263)
[20:05:03] - User ID: 5514B7EE6EECB65D
[20:05:03] - Machine ID: 1
[20:05:03]
[20:05:03] Loaded queue successfully.
[20:05:03] Initialization complete
[20:05:04]
[20:05:04] + Processing work unit
[20:05:05] Core required: FahCore_78.exe
[20:05:04] - Autosending finished units... [June 19 20:05:04 UTC]
[20:05:05] Trying to send all finished work units
[20:05:05] Project: 897 (Run 1, Clone 249, Gen 20)
[20:05:05] Core found.

[20:05:05] + Attempting to send results [June 19 20:05:05 UTC]
[20:05:05] - Reading file work/wuresults_01.dat from core
[20:05:05] (Read 3944353 bytes from disk)
[20:05:05] Connecting to http://130.49.240.81:8080/
[20:05:05] Working on queue slot 03 [June 19 20:05:05 UTC]
[20:05:05] + Working ...
[20:05:05] - Calling '.\FahCore_78.exe -dir work/ -suffix 03 -cpu 66 -checkpoint 19 -verbose -lifeline 3024 -version 623'

[20:05:08]
[20:05:08] *------------------------------*
[20:05:08] Folding@Home Gromacs Core
[20:05:09] Version 1.90 (March 8, 2006)
[20:05:09]
[20:05:09] Preparing to commence simulation
[20:05:09] - Looking at optimizations...
[20:05:09] - Files status OK
[20:05:19] - Couldn't send HTTP request to server
[20:05:19] + Could not connect to Work Server (results)
[20:05:19] (130.49.240.81:8080)
[20:05:19] + Retrying using alternative port
[20:05:19] Connecting to http://130.49.240.81:80/
[20:05:26] - Couldn't send HTTP request to server
[20:05:26] + Could not connect to Work Server (results)
[20:05:26] (130.49.240.81:80)
[20:05:26] - Error: Could not transmit unit 01 (completed May 9) to work server.
[20:05:26] - 202 failed uploads of this unit.

[20:05:26] + Attempting to send results [June 19 20:05:26 UTC]
[20:05:26] - Reading file work/wuresults_01.dat from core
[20:05:26] (Read 3944353 bytes from disk)
[20:05:26] Connecting to http://130.49.240.77:8080/
[20:05:26] - Couldn't send HTTP request to server
[20:05:26] + Could not connect to Work Server (results)
[20:05:26] (130.49.240.77:8080)
[20:05:26] + Retrying using alternative port
[20:05:26] Connecting to http://130.49.240.77:80/
[20:05:26] - Couldn't send HTTP request to server
[20:05:26] + Could not connect to Work Server (results)
[20:05:26] (130.49.240.77:80)
[20:05:26] Could not transmit unit 01 to Collection server; keeping in queue.
[20:05:26] Project: 3861 (Run 33, Clone 9, Gen 6)

[20:05:26] + Attempting to send results [June 19 20:05:26 UTC]
[20:05:26] - Reading file work/wuresults_02.dat from core
[20:05:26] (Read 1112402 bytes from disk)
[20:05:26] Connecting to http://128.143.48.226:8080/
[20:05:27] - Couldn't send HTTP request to server
[20:05:27] + Could not connect to Work Server (results)
[20:05:27] (128.143.48.226:8080)
[20:05:27] + Retrying using alternative port
[20:05:27] Connecting to http://128.143.48.226:80/
[20:05:27] - Couldn't send HTTP request to server
[20:05:27] + Could not connect to Work Server (results)
[20:05:27] (128.143.48.226:80)
[20:05:27] - Error: Could not transmit unit 02 (completed May 15) to work server.
[20:05:27] - 172 failed uploads of this unit.

[20:05:27] + Attempting to send results [June 19 20:05:27 UTC]
[20:05:27] - Reading file work/wuresults_02.dat from core
[20:05:27] (Read 1112402 bytes from disk)
[20:05:27] Connecting to http://128.143.48.227:8080/
[20:05:30] - Expanded 3871943 -> 20813811 (decompressed 537.5 percent)
[20:05:32]
[20:05:32] Project: 2611 (Run 1, Clone 851, Gen 126)
[20:05:32]
[20:05:33] Assembly optimizations on if available.
[20:05:33] Entering M.D.
[20:05:48] - Couldn't send HTTP request to server
[20:05:48] + Could not connect to Work Server (results)
[20:05:48] (128.143.48.227:8080)
[20:05:48] + Retrying using alternative port
[20:05:48] Connecting to http://128.143.48.227:80/
[20:06:01] (Starting from checkpoint)
[20:06:01] Protein: p2611_POPE
[20:06:01]
[20:06:02] Writing local files
[20:06:02] Completed 5724 out of 250000 steps (2%)
[20:06:09] - Couldn't send HTTP request to server
[20:06:09] + Could not connect to Work Server (results)
[20:06:09] (128.143.48.227:80)
[20:06:09] Could not transmit unit 02 to Collection server; keeping in queue.
[20:06:09] Project: 3860 (Run 377, Clone 11, Gen 5)

[20:06:09] + Attempting to send results [June 19 20:06:09 UTC]
[20:06:09] - Reading file work/wuresults_06.dat from core
[20:06:09] (Read 2429520 bytes from disk)
[20:06:09] Connecting to http://128.143.48.226:8080/
[20:06:09] - Couldn't send HTTP request to server
[20:06:09] + Could not connect to Work Server (results)
[20:06:09] (128.143.48.226:8080)
[20:06:09] + Retrying using alternative port
[20:06:09] Connecting to http://128.143.48.226:80/
[20:06:09] - Couldn't send HTTP request to server
[20:06:09] + Could not connect to Work Server (results)
[20:06:09] (128.143.48.226:80)
[20:06:09] - Error: Could not transmit unit 06 (completed May 31) to work server.
[20:06:09] - 92 failed uploads of this unit.

[20:06:09] + Attempting to send results [June 19 20:06:09 UTC]
[20:06:09] - Reading file work/wuresults_06.dat from core
[20:06:09] (Read 2429520 bytes from disk)
[20:06:09] Connecting to http://128.143.48.227:8080/
[20:06:23] Extra SSE boost OK.
[20:06:30] - Couldn't send HTTP request to server
[20:06:30] + Could not connect to Work Server (results)
[20:06:30] (128.143.48.227:8080)
[20:06:30] + Retrying using alternative port
[20:06:30] Connecting to http://128.143.48.227:80/
[20:06:51] - Couldn't send HTTP request to server
[20:06:51] + Could not connect to Work Server (results)
[20:06:51] (128.143.48.227:80)
[20:06:51] Could not transmit unit 06 to Collection server; keeping in queue.
[20:06:51] Project: 3860 (Run 314, Clone 19, Gen 2)

[20:06:51] + Attempting to send results [June 19 20:06:51 UTC]
[20:06:51] - Reading file work/wuresults_08.dat from core
[20:06:52] (Read 2560137 bytes from disk)
[20:06:52] Connecting to http://128.143.48.226:8080/
[20:06:52] - Couldn't send HTTP request to server
[20:06:52] + Could not connect to Work Server (results)
[20:06:52] (128.143.48.226:8080)
[20:06:52] + Retrying using alternative port
[20:06:52] Connecting to http://128.143.48.226:80/
[20:06:52] - Couldn't send HTTP request to server
[20:06:52] + Could not connect to Work Server (results)
[20:06:52] (128.143.48.226:80)
[20:06:52] - Error: Could not transmit unit 08 (completed June 11) to work server.
[20:06:52] - 40 failed uploads of this unit.

[20:06:52] + Attempting to send results [June 19 20:06:52 UTC]
[20:06:52] - Reading file work/wuresults_08.dat from core
[20:06:52] (Read 2560137 bytes from disk)
[20:06:52] Connecting to http://128.143.48.227:8080/
[20:07:13] - Couldn't send HTTP request to server
[20:07:13] + Could not connect to Work Server (results)
[20:07:13] (128.143.48.227:8080)
[20:07:13] + Retrying using alternative port
[20:07:13] Connecting to http://128.143.48.227:80/
[20:07:34] - Couldn't send HTTP request to server
[20:07:34] + Could not connect to Work Server (results)
[20:07:34] (128.143.48.227:80)
[20:07:34] Could not transmit unit 08 to Collection server; keeping in queue.
[20:07:34] + Sent 0 of 4 completed units to the server
[20:07:34] - Autosend completed

Folding Forum

130.49.240.81 and 130.49.240.77

130.49.240.81 and 130.49.240.77

Re: Need help can't connect to any server

Re: Need help can't connect to any server

Re: Need help can't connect to any server

Re: Need help can't connect to any server

Re: Need help can't connect to any server

Re: Need help can't connect to any server

Re: Need help can't connect to any server

Re: Need help can't connect to return WU

Re: Need help can't connect to return WU

Re: Need help can't connect to return WU

Re: Need help can't connect to return WU

Re: Need help can't connect to return WU

can't connect to 171.67.108.11 and 171.67.108.25

Re: 130.49.240.81 and 130.49.240.77