[14:08:30] Connecting to http://assign.stanford.edu:8080/
[14:08:30] Posted data.
[14:08:30] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[14:08:30] + Couldn't get work instructions.
[14:08:30] - Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
[14:11:11] + Attempting to get work packet
[14:11:11] - Will indicate memory of 2004 MB
[14:11:11] - Connecting to assignment server
[14:11:11] Connecting to http://assign.stanford.edu:8080/
[14:11:12] Posted data.
[14:11:12] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[14:11:12] + Couldn't get work instructions.
[14:11:12] - Attempt #7 to get work failed, and no other work to do.
Waiting before retry.
+ No appropriate work server was available; will try again in a bit.
[14:08:30] + Couldn't get work instructions.
When seeing these messages, the best thing to try is to change client settings (change reported memory, flags or packet size) to see if it can find other assignments.
It could also help us to know your current settings.
Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
toTOW wrote:
When seeing these messages, the best thing to try is to change client settings (change reported memory, flags or packet size) to see if it can find other assignments.
It could also help us to know your current settings.
All my clients are linux smp, This one is [email protected] Ubuntu 8.04 native.
BTW. just as soon as i posted this error message, I got a 4433 assigned to me.
Sorry to be inpatient, but I was waiting almost an hour (I had to use the qfix trick to even send the previously completed WU).
15:58:00] - Will indicate memory of 2962 MB
[15:58:00] - Connecting to assignment server
[15:58:00] Connecting to http://assign.stanford.edu:8080/
[15:58:00] - Autosending finished units... [March 6 15:58:00 UTC]
[15:58:00] Trying to send all finished work units
[15:58:00] + No unsent completed units remaining.
[15:58:00] - Autosend completed
[15:58:01] Posted data.
[15:58:01] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[15:58:01] + Couldn't get work instructions.
[15:58:01] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[15:58:20] + Attempting to get work packet
[15:58:20] - Will indicate memory of 2962 MB
[15:58:20] - Connecting to assignment server
[15:58:20] Connecting to http://assign.stanford.edu:8080/
[15:58:20] Posted data.
[15:58:20] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[15:58:20] + Couldn't get work instructions.
[15:58:20] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
Funny, does server 171.64.65.121 (AS-80) always show a net-load of 0?
At this moment many of the work servers are showing an extremely high CPU load - Not sure what's up with that. Perhaps new work being loaded in for distribution over the weekend?
Could have been. The folding systems I have setup that were getting the error above finally started getting WU's about 30-60 minutes after my post this morning.
[12:15:42]
[12:15:42] Loaded queue successfully.
[12:15:42] - Preparing to get new work unit...
[12:15:42] + Attempting to get work packet
[12:15:42] - Autosending finished units... [April 22 12:15:42 UTC]
[12:15:42] - Will indicate memory of 510 MB
[12:15:42] Trying to send all finished work units
[12:15:42] - Detect CPU.[12:15:42] + No unsent completed units remaining.
Vendor: GenuineIntel, Family: 15, Model: 4, Stepping: 7
[12:15:42] - Autosend completed
[12:15:42] - Connecting to assignment server
[12:15:42] Connecting to http://assign.stanford.edu:8080/
[12:17:44] Posted data.
[12:19:29] Initial: 003A; + Could not connect to Assignment Server
[12:19:29] Connecting to http://assign2.stanford.edu:80/
[12:19:30] Posted data.
[12:19:30] Initial: 43AB; - Successful: assigned to (171.67.108.13).
[12:19:31] + News From Folding@Home: Welcome to Folding@Home
[12:19:31] Loaded queue successfully.
[12:19:31] Connecting to http://171.67.108.13:80/
[12:19:33] - Couldn't send HTTP request to server
[12:19:33] (Got status 503)
[12:19:33] + Could not connect to Work Server
[12:19:33] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[12:19:44] + Attempting to get work packet
[12:19:44] - Will indicate memory of 510 MB
[12:19:44] - Connecting to assignment server
[12:19:44] Connecting to http://assign.stanford.edu:8080/
[12:21:48] Posted data.
[12:23:34] Initial: 003A; + Could not connect to Assignment Server
[12:23:34] Connecting to http://assign2.stanford.edu:80/
[12:23:37] Posted data.
[12:23:37] Initial: 43AB; - Successful: assigned to (171.67.108.13).
[12:23:37] + News From Folding@Home: Welcome to Folding@Home
[12:23:37] Loaded queue successfully.
[12:23:37] Connecting to http://171.67.108.13:80/
[12:23:39] - Couldn't send HTTP request to server
[12:23:39] (Got status 503)
[12:23:39] + Could not connect to Work Server
[12:23:39] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[12:23:50] + Attempting to get work packet
[12:23:50] - Will indicate memory of 510 MB
[12:23:50] - Connecting to assignment server
[12:23:50] Connecting to http://assign.stanford.edu:8080/
[12:25:50] Posted data.
[12:45:50] Initial: 003A;
u not alone toTOW