Running 7.6.21 on GPU only by adding in Folding Slots ID:
1 GPU
I have now upgraded to a better multi core cpu and would like to add the ability to fold on 3 of the four cores (leaving 1 for the gpu!
How do I do this?
How to add CPU
Moderators: Site Moderators, FAHC Science Team
-
Joe_H
- Site Admin
- Posts: 8082
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Studio M1 Max 32 GB smp6
Mac Hack i7-7700K 48 GB smp4 - Location: W. MA
Re: How to add CPU
Use Configure in FAHControl, select Slots, Add a CPU slot, you can set the number of CPU threads there to 3.
It has been a while since I ran 7.6.21, and I only did on a Mac. I do recall mention by some running on Windows that depending on the scheme used the radio buttons for CPU vs GPU on the left could be hard to see.
It has been a while since I ran 7.6.21, and I only did on a Mac. I do recall mention by some running on Windows that depending on the scheme used the radio buttons for CPU vs GPU on the left could be hard to see.
-
muziqaz
- Posts: 1490
- Joined: Sun Dec 16, 2007 6:22 pm
- Hardware configuration: 9950x, 7950x3D, 5950x, 5800x3D
7900xtx, RX9070, Radeon 7, 5700xt, 6900xt, RX 550 640SP - Location: London
- Contact:
Re: How to add CPU
Right click on systray icon, click on Advanced Control>Configure>Slots
Click on Add+, then click on CPU, enter number of threads you want the slot to use. Click Ok>Save, and Start folding
Click on Add+, then click on CPU, enter number of threads you want the slot to use. Click Ok>Save, and Start folding
FAH Omega tester
-
silverpulser
- Posts: 109
- Joined: Sat Nov 10, 2012 9:06 am
Re: How to add CPU
That worked thanks. Up and running cpu work units now