Project: 4587 (Run 8, Clone 37, Gen 2)

[anko1]

Hi there. Anyone seen this before?

Code: Select all

[03:34:19] Working on Unit 01 [July 4 03:34:19]
[03:34:19] + Working ...
[03:34:19] - Calling 'FahCore_82.exe -dir work/ -suffix 01 -checkpoint 15 -verbose -lifeline 4004 -version 503'

[03:34:19] 
[03:34:19] *------------------------------*
[03:34:19] Folding@Home PMD Core
[03:34:19] Version 1.03 (September 7, 2005)
[03:34:19] 
[03:34:19] Preparing to commence simulation
[03:34:19] - Looking at optimizations...
[03:34:19] - Created dyn
[03:34:19] - Files status OK
[03:34:19] - Expanded 15089 -> 94572 (decompressed 626.7 percent)
[03:34:19] 
[03:34:19] Project: 4587 (Run 8, Clone 37, Gen 2)
[03:34:19] 
[03:34:19] Assembly optimizations on if available.
[03:34:19] Entering M.D.
[03:34:23] + New frame time estimate; Working...
[03:34:25] Protein: p4587_T0473-12_minout
[03:34:25] 
[03:34:25] Completed 0 out of 2500000 steps  (0)
[03:34:28] + New frame time estimate; Working...
[03:37:41] Writing local files
[03:37:41] Completed 25000 out of 2500000 steps  (1)

{snip}

[11:41:48] Completed 2475000 out of 2500000 steps  (99)
[11:47:03] Writing local files
[11:47:03] Completed 2500000 out of 2500000 steps  (100)
[11:47:03] Writing checkpoint files
[11:47:05] + Writing 'sec_per_frame = 12.720000' to config
[11:47:05] + Working ...+ New frame time estimate; Working...
[11:47:15] + New frame time estimate; Working...
[11:47:20] + New frame time estimate; Working...
[11:47:25] + New frame time estimate; Working...
[11:47:30] + New frame time estimate; Working...
[11:47:35] + New frame time estimate; Working...
[11:47:40] + New frame time estimate; Working...
[11:47:45] + New frame time estimate; Working...
[11:47:50] + New frame time estimate; Working...
[11:47:55] + New frame time estimate; Working...
[11:48:00] + New frame time estimate; Working...
[11:48:03] 
[11:48:03] Finished Work Unit:
[11:48:03] Leaving Run
[11:48:03] - Writing 278284 bytes of core data to disk...
[11:48:03]   ... Done.
[11:48:03] - Shutting down core
[11:48:03] 
[11:48:03] Folding@home Core Shutdown: FINISHED_UNIT
[11:48:05] + New frame time estimate; Working...
[11:48:07] CoreStatus = 64 (100)
[11:48:07] Unit 1 finished with 99 percent of time to deadline remaining.
[11:48:07] Updated performance fraction: 0.985889
[11:48:07] Sending work to server


[11:48:07] + Attempting to send results
[11:48:07] - Reading file work/wuresults_01.dat from core
[11:48:07]   (Read 278284 bytes from disk)
[11:48:07] Connecting to http://169.230.26.30:8080/
[11:48:07] - Couldn't send HTTP request to server
[11:48:07] + Could not connect to Work Server (results)
[11:48:07]     (169.230.26.30:8080)
[11:48:07] - Error: Could not transmit unit 01 (completed July 4) to work server.
[11:48:07] - 1 failed uploads of this unit.
[11:48:07]   Keeping unit 01 in queue.
[11:48:07] Trying to send all finished work units


[11:48:07] + Attempting to send results
[11:48:07] - Reading file work/wuresults_01.dat from core
[11:48:07]   (Read 278284 bytes from disk)
[11:48:07] Connecting to http://169.230.26.30:8080/
[11:48:07] - Couldn't send HTTP request to server
[11:48:07] + Could not connect to Work Server (results)
[11:48:07]     (169.230.26.30:8080)
[11:48:07] - Error: Could not transmit unit 01 (completed July 4) to work server.
[11:48:07] - 2 failed uploads of this unit.

[color=#0040FF][color=#008040]This isn't the weird part; my son disconnected the modem from my computer. :roll: But then it does this: [/color][/color]

[12:10:38] - Error: Attempt #9  to get work failed, and no other work to do.
             Waiting before retry.
[12:31:59] + Attempting to get work packet
[12:31:59] - Will indicate memory of 2046 MB.
[12:31:59] - Connecting to assignment server
[12:31:59] Connecting to http://assign.stanford.edu:8080/
[12:31:59] - Could not v3HTTPOpen
[12:31:59] + Could not connect to Assignment Server
[12:31:59] Connecting to http://assign2.stanford.edu:80/
[12:31:59] - Could not v3HTTPOpen
[12:31:59] + Could not connect to Assignment Server 2
[12:31:59] + Couldn't get work instructions.
[12:31:59] - Error: Attempt #10  to get work failed, and no other work to do.
             Waiting before retry.
[13:14:32] + New frame time estimate; Working...
[13:14:32] + New frame time estimate; Working...
[13:14:38] + New frame time estimate; Working...
[13:14:43] + New frame time estimate; Working...
[13:14:45] + Attempting to get work packet
[13:14:45] - Will indicate memory of 2046 MB.
[13:14:45] - Connecting to assignment server
[13:14:45] Connecting to http://assign.stanford.edu:8080/
[13:14:45] - Could not v3HTTPOpen
[13:14:45] + Could not connect to Assignment Server 2
[13:14:45] + Couldn't get work instructions.
[13:14:45] - Error: Attempt #11  to get work failed, and no other work to do.
             Waiting before retry.
[13:14:49] + New frame time estimate; Working...
[13:14:55] + New frame time estimate; Working...
[13:15:01] + New frame time estimate; Working...
[13:15:07] + New frame time estimate; Working...
[13:15:13] + New frame time estimate; Working...
[13:22:11] + New frame time estimate; Working...
[13:22:11] + New frame time estimate; Working...
[13:22:17] + New frame time estimate; Working...
[13:22:23] + New frame time estimate; Working...
[13:22:29] + New frame time estimate; Working...
[13:22:35] + New frame time estimate; Working...
[13:25:20] + New frame time estimate; Working...
[13:25:20] + New frame time estimate; Working...
[13:25:26] + New frame time estimate; Working...
[13:25:32] + New frame time estimate; Working...
[13:25:37] + New frame time estimate; Working...
[13:25:47] + New frame time estimate; Working...
[13:25:47] + New frame time estimate; Working...
[13:25:54] + New frame time estimate; Working...
[13:25:55] Opening http://vspx27.stanford.edu/cgi-bin/main.py?qtype=userpage&username=anko1...
[13:26:00] + New frame time estimate; Working...
[13:26:06] + New frame time estimate; Working...
[13:26:12] + New frame time estimate; Working...
[13:26:17] + New frame time estimate; Working...
[13:26:23] + New frame time estimate; Working...
[13:26:28] + New frame time estimate; Working...
[13:26:34] + New frame time estimate; Working...

Then it just froze. It erred out [Microsoft has encountered a problem, blah, blah, blah] and shut down. When I restarted, I got this:

Code: Select all

--- Opening Log file [July 4 14:06:09] 


# Windows Graphical Edition ###################################################
###############################################################################

                       Folding@Home Client Version 5.03

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\FAH GRAPHICAL
Arguments: -verbosity 9 -local -advmethods 

[14:06:09] - Ask before connecting: No
[14:06:09] - User name: anko1 (Team 47815)
[14:06:09] - User ID: 6437903729B2F841
[14:06:09] - Machine ID: 3
[14:06:09] 
[14:06:09] Loaded queue successfully.
[14:06:09] Initialization complete
[14:06:09] + Benchmarking ...
[14:06:12] The benchmark result is 12044
[14:06:12] 
[14:06:12] + Processing work unit
[14:06:12] - Autosending finished units...
[14:06:12] Trying to send all finished work units
[14:06:12] + No unsent completed units remaining.
[14:06:12] - Autosend completed
[14:06:12] Core required: FahCore_82.exe
[14:06:12] Core found.
[14:06:12] Working on Unit 02 [July 4 14:06:12]
[14:06:12] + Working ...
[14:06:12] - Calling 'FahCore_82.exe -dir work/ -suffix 02 -checkpoint 15 -verbose -lifeline 5952 -version 503'

[14:06:12] 
[14:06:12] *------------------------------*
[14:06:12] Folding@Home PMD Core
[14:06:12] Version 1.03 (September 7, 2005)
[14:06:12] 
[14:06:12] Preparing to commence simulation
[14:06:12] - Looking at optimizations...
[14:06:12] - Files status OK
[14:06:12] - Expanded 20906 -> 136990 (decompressed 655.2 percent)
[14:06:12] 
[14:06:12] Project: 4583 (Run 84, Clone 28, Gen 4)
[14:06:12] 
[14:06:12] Assembly optimizations on if available.
[14:06:12] Entering M.D.
[14:06:18] Protein: p4583_T0476-16_minout
[14:06:18] 
[14:06:18] Completed 0 out of 2500000 steps  (0)

As you can see, somehow I picked up a new unit w/o it showing in the log file. Also, it indicates that there are no units to send, which I guess makes sense b/c when I looked in the work folder, there's no results file for unit 1. On the other hand, there's no record in any log file showing 01 got sent. Any ideas? At any rate, wanted to let people know that this WU is potentially lost so they can reissue it before deadline.

[toTOW]

Strange issue indeed

But you returned that WU successfully (on the second try I assume ) : Your WU (P4587 R8 C37 G2) was added to the stats database on 2008-07-04 08:05:36 for 84.69 points of credit.

[anko1]

Excellent. Thanks for letting me know I got credit despite what the log file said, or didn't say.

[toTOW]

I asked Adam and Vince to have a look at thins thread

[anko1]

Thanks. The "New time frame estimate...." after it was supposedly done and looking for a new WU really threw me for a loop.