OK, thanks!JimF wrote: ↑Mon Jun 13, 2022 4:09 pm This is a bit of a kludge, but I have it installed on 10 Ubuntu 20.04.4 machines, and it works reliably for Nvidia, and AMD also.
See: https://github.com/cdberkstresser/fah-control
Code: Select all
sudo apt-get install -y python3-stdeb python3-gi python3-all python3-six debhelper \ dh-python gir1.2-gtk-3.0
Ubuntu 22.04 LTS FAHcontrol installation
Moderators: Site Moderators, FAHC Science Team
Re: Ubuntu 22.04 LTS FAHcontrol installation
Folding rig:Supermicro X9DRD-7LN4F-JBOD | (2) Xeon E5-2670 | 128GB DDR3 ECC Registered
Install Folding@Home on Linux without Python dependancy issues
Install Folding@Home on Linux without Python dependancy issues
Re: Ubuntu 22.04 LTS FAHcontrol installation
So what options for those of us on 22.04 who don't want to muck around with snaps?
-
- Site Admin
- Posts: 7926
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Ubuntu 22.04 LTS FAHcontrol installation
There is a third party version of FAHControl that was forked off the open source and updated to use Python 3. It is available at this location - https://github.com/cdberkstresser/fah-control.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Re: Ubuntu 22.04 LTS FAHcontrol installation
I could not get FAHControl to work with 22.04, though I did also try that version and fiddling with the obvious stuff. It does work nicely on 20.04 from the .deb file with no fiddling.Joe_H wrote: ↑Mon Oct 31, 2022 1:44 amThere is a third party version of FAHControl that was forked off the open source and updated to use Python 3. It is available at this location - https://github.com/cdberkstresser/fah-control.
5800X + 4090 + Win11 | 5600X+ 3070 + 3070 + 2060 + Ubuntu 20.04 | 5600X + 3080 Ti + 3060 Ti + Ubuntu 20.04
-
- Site Admin
- Posts: 7926
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Ubuntu 22.04 LTS FAHcontrol installation
Which version of Python 3 is currently loaded on your 22.04 system? Looking at the closed issues on Github, Python 3.10 introduced an error and that was eventually patched. If you can reproduce the error, it can be posted as a new issue and eventually fixed.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Re: Ubuntu 22.04 LTS FAHcontrol installation
Thanks Joe_H. I've already gone back to 20.04. I might try to go 22.04 again sometime.
My error looked frighteningly similar to this one:
viewtopic.php?p=357894#p357894
My error looked frighteningly similar to this one:
viewtopic.php?p=357894#p357894
5800X + 4090 + Win11 | 5600X+ 3070 + 3070 + 2060 + Ubuntu 20.04 | 5600X + 3080 Ti + 3060 Ti + Ubuntu 20.04
-
- Posts: 1
- Joined: Thu Dec 29, 2022 9:32 am
Re: Ubuntu 22.04 LTS FAHcontrol installation
Does anyone using the snap edition know how to monitor the client's progress from another system. The files are not where they're expected and so all FAHControl from another system does is sit there trying to connect
-
- Site Admin
- Posts: 7926
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Ubuntu 22.04 LTS FAHcontrol installation
FAHControl is not looking for files in specific locations, but makes a network connection over port 36330 to FAHClient. By default FAHClient only accepts connection over that port on the loopback IP of 127.0.0.1, you have to configure it to accept connections from other IP addresses. This post has a summary of the steps involved - viewtopic.php?p=327411#p327411 - under Managing Multiple Clients. There may be some additional settings related to how the snap environment's networking is handled.realpetro7 wrote: ↑Thu Dec 29, 2022 9:40 am Does anyone using the snap edition know how to monitor the client's progress from another system. The files are not where they're expected and so all FAHControl from another system does is sit there trying to connect
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3