Ati software adrenalin 20.8.3 local online inactive

[GTX56O]

Code: Select all

18:17:20:ERROR:No compute devices matched GPU #0 {
18:17:20:ERROR:  "vendor": 4098,
18:17:20:ERROR:  "device": 29471,
18:17:20:ERROR:  "type": 1,
18:17:20:ERROR:  "species": 6,
18:17:20:ERROR:  "description": "Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]"
18:17:20:ERROR:}.  You may need to update your graphics drivers.
18:18:22:ERROR:WU00:FS00:Exception: Server did not assign work unit
18:18:23:WARNING:WU00:FS00:Failed to get assignment from 'assign1.foldingathome.org:80': No WUs available for this configuration
18:18:42:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
18:18:43:WU00:FS00:0xa7:WARNING:Console control signal 1 on PID 112
18:19:03:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Se produjo un error durante el intento de conexin ya que la parte conectada no respondi adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexin establecida ya que el host conectado no ha podido responder.
18:19:25:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
18:19:46:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Se produjo un error durante el intento de conexin ya que la parte conectada no respondi adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexin establecida ya que el host conectado no ha podido responder.
18:20:25:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
18:20:46:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Se produjo un error durante el intento de conexin ya que la parte conectada no respondi adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexin establecida ya que el host conectado no ha podido responder.
18:22:02:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
18:22:24:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Se produjo un error durante el intento de conexin ya que la parte conectada no respondi adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexin establecida ya que el host conectado no ha podido responder.
18:23:02:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
18:23:24:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Se produjo un error durante el intento de conexin ya que la parte conectada no respondi adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexin establecida ya que el host conectado no ha podido responder.

Mod Edit: Added Code Tags - PantherX

[Neil-B]

It may be that your graphics card is borderline as to whether it can fold ... believe it may be limited to OpenCL1.1 ... but with the new cuda enabled core this might not be an issue ... One of the mods should be able to confirm current status on this.

Edited to add My Apologies !!!

OK so "ROFL" at own stupidity ... totally my bad ... I searched your username as the graphics card involved for some reason (guess I was tired) ... and the above probably would have held true for a GTX560 !! ... sorry to all for any confusion caused

[bruce]

The CUDA enabled core only works for nVidia GPUs. According to https://www.techpowerup.com/gpu-specs/r ... 0-xt.c3474 your gpu does support OpenCL 1.2 or even Opencl 2.0 with the right drivers.

Have you attempted to enhance the performance by mis-flashing the BIOS?

I can't help you with the drivers; maybe somebody else can. It seems there is a problem:
ERROR:}. You may need to update your graphics drivers.

[GTX56O]

no have GTX560, i have rx5700xt, i have de last driver, but recently, i have a make a new client in other computer, the same name of a client, and the same passkey. i have open cl 2.0

My problem is Open CL: Not detected: clGetDeviceIDs() returned -1

I have a RX5700XT, i have got a software controller Adrenalin 20.8.3, you think i need the last, the 20.9.1?, ok i actualization and upgrade the verision, to 20.9.1, but no run

20:56:59:WU00:FS01:Connecting to assign1.foldingathome.org:80
20:56:59:WU00:FS01:Assigned to work server 192.0.2.1
20:56:59:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] from 192.0.2.1
20:56:59:WU00:FS01:Connecting to 192.0.2.1:8080
20:57:21:WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80
20:57:21:WU00:FS01:Connecting to 192.0.2.1:80

[PantherX]

That error message indicates that the GPU on your system is not supported. Can you please post a screenshot of GPU-Z so we can see what AMD GPU you have on your system?

[GTX56O]

PC 1:
CPU https://ibb.co/RT6fDwL
GPU https://ibb.co/5hh0N4y (problem)

PC 2:

CPU https://ibb.co/4JXRj5q
GPU https://ibb.co/SmwD7Ry

[bruce]

The GPU 1002 731f is supported. Did you install the driver and OpenCL before running FAH?

[GTX56O]

i solve this problem, i was running BOINC in the CPU with the GPU disabled proyect asteroids at home, with the CPU ryzen 5 2600x i have a big problems, and unistall boinc, is very rare because the CPU 3600X can run boinc and two grapics cards, but the 2600X no, because the grafic card stop.