I seem to have received a bad _a8 core update [OS X]

[PantherX]

Admin: Thanks for unblocking me (see my email at 0918 BST (0818 GMT/UTC). I still don't know why I was banned for spamming (falsely for the second time recently) but thanks for the speedy resolution...

If you have a dynamic IP Address, then it can occasionally happen where an IP that you were assigned was previously used by a spamming operation. Thus, it was blocked. However, once you reported it, it was then unblocked since the spamming operation is now using a different IP Address. Unfortunatly, there's no automatic system that I know off in the Forum software.

...I appear still to be running v7.6.9, how do I update to the latest version - or do I not need so to do? i can't se a reference on here as to how to update and then, going forward, ensure that I am always up-to-date...

In theory, you can download the latest version and install on top of the existing one, i.e. an in-place upgrade. I am not familar with MacOS so can't provide the exact steps. However, other members here who have MacOS experience will be able to help you out

it would be nice if the update process were automatic (if it isn't already) for those of us who don't understand the technical side and who thus leave well alone...

This has been an on-going request but there's no ETA. Generally speaking, a new version of the client is released every few years if needed to advance scientific progress. Given the resource constraints, I don't expect it to be made available soon but let's wait and see what happens.

[iBozz]

Thanks for the advice, PantherX.

[Joe_H]

iBozz wrote:
...I appear still to be running v7.6.9, how do I update to the latest version - or do I not need so to do? i can't se a reference on here as to how to update and then, going forward, ensure that I am always up-to-date...

In theory, you can download the latest version and install on top of the existing one, i.e. an in-place upgrade. I am not familar with MacOS so can't provide the exact steps. However, other members here who have MacOS experience will be able to help you out

I have had no problems just updating over the older version on my Mac's, and what problems have been reported are mostly on updates to existing Windows and Linux installations with GPU slots and the autodetect and configuration of those GPUs. A few reports where the update did not run properly over a running client with an active WU. So the safest way would be to set the current WU to Finish and run the update after the WU finishes and uploads.

[iBozz]

Thanks, Joe.

Whenever I try to do anything to F@H it seems to go pear-shaped.

I know how to stop the client and check it has uploaded, but in simple terms how would I then update the version?

I had hoped (well, assumed, really) that when I was following PantherX's sage advice about how to correct the stalling WUs, that the system would bring down the latest version but if I read my latest log correctly it hasn't.

Unless, that is, I am misreading the following lines?

16:10:21:WU00:FS00:0xa7:******************************** Build - libFAH ********************************
16:10:21:WU00:FS00:0xa7: Version: 0.0.19
16:10:21:WU00:FS00:0xa7: Author: Joseph Coffland <[email protected]>

Code: Select all

16:10:19:WU01:FS00:0xa7:Folding@home Core Shutdown: FINISHED_UNIT
16:10:20:WU01:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
16:10:20:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:14800 run:1246 clone:5 gen:28 core:0xa7 unit:0x0000001e0002894b5f2aa44d7d617250
16:10:20:WU01:FS00:Uploading 3.17MiB to 155.247.166.219
16:10:20:WU01:FS00:Connecting to 155.247.166.219:8080
16:10:20:WU00:FS00:Starting
16:10:20:WU00:FS00:Running FahCore: /usr/local/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/cores.foldingathome.org/osx/64bit-avx-256/a7-0.0.19/Core_a7.fah/FahCore_a7" -dir 00 -suffix 01 -version 706 -lifeline 229 -checkpoint 15 -np 4
16:10:20:WU00:FS00:Started FahCore on PID 81568
16:10:20:WU00:FS00:Core PID:81569
16:10:20:WU00:FS00:FahCore 0xa7 started
16:10:21:WU00:FS00:0xa7:*********************** Log Started 2020-09-28T16:10:21Z ***********************
16:10:21:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
16:10:21:WU00:FS00:0xa7:       Type: 0xa7
16:10:21:WU00:FS00:0xa7:       Core: Gromacs
16:10:21:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 706 -lifeline 81568 -checkpoint 15 -np
16:10:21:WU00:FS00:0xa7:             4
16:10:21:WU00:FS00:0xa7:************************************ CBang *************************************
16:10:21:WU00:FS00:0xa7:       Date: Nov 27 2019
16:10:21:WU00:FS00:0xa7:       Time: 03:27:01
16:10:21:WU00:FS00:0xa7:   Revision: d25803215b59272441049dfa05a0a9bf7a6e3c48
16:10:21:WU00:FS00:0xa7:     Branch: master
16:10:21:WU00:FS00:0xa7:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
16:10:21:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -mmacosx-version-min=10.7
16:10:21:WU00:FS00:0xa7:             -Wno-unused-local-typedefs -stdlib=libc++ -fPIC
16:10:21:WU00:FS00:0xa7:   Platform: darwin 19.0.0
16:10:21:WU00:FS00:0xa7:       Bits: 64
16:10:21:WU00:FS00:0xa7:       Mode: Release
16:10:21:WU00:FS00:0xa7:************************************ System ************************************
16:10:21:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-7600K CPU @ 3.80GHz
16:10:21:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 9
16:10:21:WU00:FS00:0xa7:       CPUs: 4
16:10:21:WU00:FS00:0xa7:     Memory: 64.00GiB
16:10:21:WU00:FS00:0xa7:Free Memory: 27.02GiB
16:10:21:WU00:FS00:0xa7:    Threads: POSIX_THREADS
16:10:21:WU00:FS00:0xa7: OS Version: 10.15
16:10:21:WU00:FS00:0xa7:Has Battery: false
16:10:21:WU00:FS00:0xa7: On Battery: false
16:10:21:WU00:FS00:0xa7: UTC Offset: 1
16:10:21:WU00:FS00:0xa7:        PID: 81569
16:10:21:WU00:FS00:0xa7:        CWD: /Library/Application Support/FAHClient/work
16:10:21:WU00:FS00:0xa7:******************************** Build - libFAH ********************************
16:10:21:WU00:FS00:0xa7:    Version: 0.0.19
16:10:21:WU00:FS00:0xa7:     Author: Joseph Coffland <[email protected]>
16:10:21:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org
16:10:21:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/
16:10:21:WU00:FS00:0xa7:       Date: Nov 25 2019
16:10:21:WU00:FS00:0xa7:       Time: 16:41:59
16:10:21:WU00:FS00:0xa7:   Revision: d5b5c747532224f986b7cd02c968ed9a20c16d6e
16:10:21:WU00:FS00:0xa7:     Branch: master
16:10:21:WU00:FS00:0xa7:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
16:10:21:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -mmacosx-version-min=10.7
16:10:21:WU00:FS00:0xa7:             -Wno-unused-local-typedefs -stdlib=libc++
16:10:21:WU00:FS00:0xa7:   Platform: darwin 19.0.0
16:10:21:WU00:FS00:0xa7:       Bits: 64
16:10:21:WU00:FS00:0xa7:       Mode: Release
16:10:21:WU00:FS00:0xa7:************************************ Build *************************************
16:10:21:WU00:FS00:0xa7:       SIMD: avx_256
16:10:21:WU00:FS00:0xa7:********************************************************************************
16:10:21:WU00:FS00:0xa7:Project: 16803 (Run 11, Clone 991, Gen 78)
16:10:21:WU00:FS00:0xa7:Unit: 0x0000006482ed0b915e99f8753fd4ff81
16:10:21:WU00:FS00:0xa7:Reading tar file core.xml
16:10:21:WU00:FS00:0xa7:Reading tar file frame78.tpr
16:10:21:WU00:FS00:0xa7:Digital signatures verified
16:10:21:WU00:FS00:0xa7:Calling: mdrun -s frame78.tpr -o frame78.trr -cpt 15 -nt 4
16:10:21:WU00:FS00:0xa7:Steps: first=39000000 total=500000
16:10:25:WU00:FS00:0xa7:Completed 1 out of 500000 steps (0%)
16:10:28:WU01:FS00:Upload 5.91%
16:10:35:WU01:FS00:Upload 13.78%
16:10:41:WU01:FS00:Upload 17.72%
16:10:47:WU01:FS00:Upload 23.63%
16:10:54:WU01:FS00:Upload 27.57%

[Joe_H]

The client it self does not update automatically, but it does automatically download updated folding cores. They concentrated on updating the cores as needed since that is where the actual folding work is getting done. So in this case version 0.0.19 of Core_A7 is being used. That was updated last April If I recall to fix a bug that turned up.

In the case of Core_A8, if your system had run a WU from Project 16810, the only one out using A8 until the beta announcement for 16812 today, it would have downloaded version 0.0.6 before late last week. During internal testing of 16812 they found an issue with 0.0.6, version 0.0.7 was created to fix that. It was supposed to only go to testers of 16812, but for some reason was also sent to everyone everyone running 16810. Since all OS versions of the core had not yet been tested, once it got picked up by OS X systems, that is where we found out about the problem covered in this topic. Version 0.0.8 of Core_A8 was created to fix that.

The client version is shown at the very beginning of the log. Main reason for updates to the client is to support new features on the servers, fix bugs that have shown up, and support newer OSs. Beyond that the server code has been kept backward compatible with older versions of the client, just some assignments may be restricted. Apparently from a report I have seen, there were still some version 7.2 and 7.3 clients connecting for assignments around the beginning of this year.

So no rush to update the client itself, 7.6.9 should work just fine for some time. But if you do want to update, set the current WU to Finish, once it is done and uploaded the client should show as paused. You will need to use FAHControl, as I recall the Finish function on the Web Control was not working. If you want you can also Pause after the upload has completed.

Download the client package from the F@h site, double click it to unzip it, and you can run the install. If you are running the latest versions of macOS you might have to override Gatekeeper to run the installer. The signing on the installer is accepted by older OS versions.

[ShootThePicture]

Since I started this thread I thought I would give you a short update. Once I found that the WUs and cores had been corrected, I simply unpaused my clients to let them run till they hit the expiration dates. That happened this morning, and I've had no issues on my three Macs. So for what it's worth, the problem seems to correct itself if you let it.

Thank you for all the help.

[iBozz]

Thanks, Joe, I’ll give that a go.

Now that I’ve got this far I may as well go the whole hog and get everything up to date - I shall then once again leave well alone unless something else goes wrong in the future.

[iBozz]

Updated to Version: 7.6.13 and running smoothly, thanks.

[wingrider]

I have about 20 repurposed legacy Apple Xserves running MacOS 7.6. I have run these machines for years and this topic has brought them to their knees. I'm bubbling this topic up again (can create a new one if necessary, but I've been fighting with this issue for a couple of months now easily. I thought it was machine related and just slogged but I've reached the end of my rope.

I keep getting 16810 (and some 16812) downloads and they error out my machines with this same error. I have trolled through the posts and have become fast at now using terminal to unload, delete, and load but when the machines catch a 16810 / 16812 , boom. I have tried keeping various versions back but that didn't matter, now I have most of them on 7.6.21 with completely clean installs including the removal of the 2 FAH folders that the uninstaller does not remove. I have done the core folder delete, all the files in the work folder deleted, I've run out of patience waiting for them to pick up a 16810 / 16812 like it's own disease. I'll add at least 2 logs, and a list of the failing units. I welcome any help I can get. Thanks.

WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:0 clone:137 gen:80 core:0xa8 unit:0x00000066b2aec48a5eff2cfe221de5de
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:11 clone:734 gen:93 core:0xa8 unit:0x00000068b2aec48a5eff2a003fc33d67
WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:16810 run:14 clone:928 gen:9 core:0xa8
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:16 clone:485 gen:55 core:0xa8 unit:0x0000003eb2aec48a5eff2b5158ea8dbd
WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:16810 run:31 clone:5 gen:95 core:0xa8 unit:0x0000006bb2aec48a5eff277c436ad92b
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:41 clone:834 gen:26 core:0xa8 unit:0x0000001cb2aec48a5eff287c7fea1dab
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:44 clone:847 gen:21 core:0xa8
WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:16810 run:47 clone:884 gen:17 core:0xa8 unit:0x00000014b2aec48a5eff2686d2477d9b
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:51 clone:237 gen:77 core:0xa8 unit:0x00000056b2aec48a5eff260c7bf020a3
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:57 clone:977 gen:27 core:0xa8 unit:0x0000001cb2aec48a5eff2517484a5c67
WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:16810 run:70 clone:864 gen:9 core:0xa8 unit:0x0000000db2aec48a5eff24134f9766d1
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:74 clone:956 gen:36 core:0xa8 unit:0x00000027b2aec48a5eff23827bc54453
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:76 clone:131 gen:80 core:0xa8
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16810 run:97 clone:767 gen:21 core:0xa8 unit:0x0000001ab2aec48a5eff1f7523418d47
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16812 run:2 clone:125 gen:36 core:0xa8 unit:0x0000002ab2aec48a5f74f158832f5839
WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:16812 run:6 clone:115 gen:32 core:0xa8 unit:0x00000023b2aec48a5f74f0257ac2dfad
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16812 run:9 clone:1364 gen:6 core:0xa8 unit:0x00000008b2aec48a5f8ddf338ec24415
WU00:FS00:Sending unit results: id:00 state:SEND error:DUMPED project:16812 run:11 clone:388 gen:27 core:0xa8 unit:0x0000001eb2aec48a5f74f01dbddef8b8

Code: Select all

 *********************** Log Started 2020-10-24T20:31:01Z ***********************
20:31:01:******************************* libFAH ********************************
20:31:01:       Date: Oct 20 2020
20:31:01:       Time: 13:36:42
20:31:01:   Revision: 5ca109d295a6245e2a2f590b3d0085ad5e567aeb
20:31:01:     Branch: master
20:31:01:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
20:31:01:    Options: -std=c++11 -fsigned-char -O3 -funroll-loops
20:31:01:             -mmacosx-version-min=10.7 -Wno-unused-local-typedefs -stdlib=libc++
20:31:01:   Platform: darwin 19.2.0
20:31:01:       Bits: 64
20:31:01:       Mode: Release
20:31:01:****************************** FAHClient ******************************
20:31:01:    Version: 7.6.21
20:31:01:     Author: Joseph Coffland <[email protected]>
20:31:01:  Copyright: 2020 foldingathome.org
20:31:01:   Homepage: https://foldingathome.org/
20:31:01:       Date: Oct 20 2020
20:31:01:       Time: 13:39:56
20:31:01:   Revision: 6efbf0e138e22d3963e6a291f78dcb9c6422a278
20:31:01:     Branch: master
20:31:01:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
20:31:01:    Options: -std=c++11 -fsigned-char -O3 -funroll-loops
20:31:01:             -mmacosx-version-min=10.7 -Wno-unused-local-typedefs -stdlib=libc++
20:31:01:   Platform: darwin 19.2.0
20:31:01:       Bits: 64
20:31:01:       Mode: Release
20:31:01:     Config: /Library/Application Support/FAHClient/config.xml
20:31:01:******************************** CBang ********************************
20:31:01:       Date: Oct 20 2020
20:31:01:       Time: 11:39:07
20:31:01:   Revision: 7e4ce85225d7eaeb775e87c31740181ca603de60
20:31:01:     Branch: master
20:31:01:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
20:31:01:    Options: -std=c++11 -fsigned-char -O3 -funroll-loops
20:31:01:             -mmacosx-version-min=10.7 -Wno-unused-local-typedefs -stdlib=libc++
20:31:01:             -fPIC
20:31:01:   Platform: darwin 19.2.0
20:31:01:       Bits: 64
20:31:01:       Mode: Release
20:31:01:******************************* System ********************************
20:31:01:        CPU: Intel(R) Xeon(R) CPU E5472 @ 3.00GHz
20:31:01:     CPU ID: GenuineIntel Family 6 Model 23 Stepping 6
20:31:01:       CPUs: 8
20:31:01:     Memory: 16.00GiB
20:31:01:Free Memory: 14.07GiB
20:31:01:    Threads: POSIX_THREADS
20:31:01: OS Version: 10.7
20:31:01:Has Battery: false
20:31:01: On Battery: false
20:31:01: UTC Offset: -7
20:31:01:        PID: 715
20:31:01:        CWD: /Library/Application Support/FAHClient
20:31:01:         OS: Darwin 11.4.2 x86_64
20:31:01:    OS Arch: AMD64
20:31:01:       GPUs: 0
20:31:01:       CUDA: Not detected: Failed to open dynamic library 'libcuda.dylib':
20:31:01:             dlopen(libcuda.dylib, 1): image not found
20:31:01:     OpenCL: Not detected: Failed to open dynamic library 'libOpenCL.dylib':
20:31:01:             dlopen(libOpenCL.dylib, 1): image not found
20:31:01:***********************************************************************
20:31:01:<config>
20:31:01:  <!-- Network -->
20:31:01:  <proxy v=':8080'/>
20:31:01:
20:31:01:  <!-- Slot Control -->
20:31:01:  <power v='full'/>
20:31:01:
20:31:01:  <!-- User Information -->
20:31:01:  <passkey v='*****'/>
20:31:01:  <team v='246024'/>
20:31:01:  <user v='wingrider'/>
20:31:01:
20:31:01:  <!-- Folding Slots -->
20:31:01:  <slot id='0' type='CPU'/>
20:31:01:</config>
20:31:01:Trying to access database...
20:31:01:Successfully acquired database lock
20:31:01:FS00:Set client configured
20:31:01:FS00:Initialized folding slot 00: cpu:8
20:31:01:WU00:FS00:Connecting to assign1.foldingathome.org:80
20:31:02:WU00:FS00:Connecting to assign1.foldingathome.org:80
20:31:02:WARNING:WU00:FS00:Failed to get assignment from 'assign1.foldingathome.org:80': No WUs available for this configuration
20:31:02:WU00:FS00:Connecting to assign2.foldingathome.org:80
20:31:03:WU00:FS00:Assigned to work server 178.174.196.138
20:31:03:WU00:FS00:Requesting new work unit for slot 00: cpu:8 from 178.174.196.138
20:31:03:WU00:FS00:Connecting to 178.174.196.138:8080
20:31:04:WU00:FS00:Downloading 1.88MiB
20:31:05:WU00:FS00:Download complete
20:31:05:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:16810 run:11 clone:862 gen:21 core:0xa8 unit:0x00000019b2aec48a5eff29f6c48034d3
20:31:05:WU00:FS00:Downloading core from http://cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah
20:31:05:WU00:FS00:Connecting to cores.foldingathome.org:80
20:31:05:WU00:FS00:FahCore a8: Downloading 5.70MiB
20:31:06:WU00:FS00:FahCore a8: Download complete
20:31:06:WU00:FS00:Valid core signature
20:31:07:WU00:FS00:Unpacked 14.16MiB to cores/cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah/FahCore_a8
20:31:07:WU00:FS00:Starting
20:31:07:WU00:FS00:Running FahCore: /usr/local/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah/FahCore_a8" -dir 00 -suffix 01 -version 706 -lifeline 715 -checkpoint 15 -np 8
20:31:07:WU00:FS00:Started FahCore on PID 716
20:31:07:WU00:FS00:Core PID:719
20:31:07:WU00:FS00:FahCore 0xa8 started
20:31:07:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
20:31:08:WU00:FS00:Starting
20:31:08:WU00:FS00:Running FahCore: /usr/local/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah/FahCore_a8" -dir 00 -suffix 01 -version 706 -lifeline 715 -checkpoint 15 -np 8
20:31:08:WU00:FS00:Started FahCore on PID 721
20:31:08:WU00:FS00:Core PID:722
20:31:08:WU00:FS00:FahCore 0xa8 started
20:31:08:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

Code: Select all

 *********************** Log Started 2020-10-24T20:34:53Z ***********************
20:34:53:******************************* libFAH ********************************
20:34:53:       Date: Oct 20 2020
20:34:53:       Time: 13:36:42
20:34:53:   Revision: 5ca109d295a6245e2a2f590b3d0085ad5e567aeb
20:34:53:     Branch: master
20:34:53:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
20:34:53:    Options: -std=c++11 -fsigned-char -O3 -funroll-loops
20:34:53:             -mmacosx-version-min=10.7 -Wno-unused-local-typedefs -stdlib=libc++
20:34:53:   Platform: darwin 19.2.0
20:34:53:       Bits: 64
20:34:53:       Mode: Release
20:34:53:****************************** FAHClient ******************************
20:34:53:    Version: 7.6.21
20:34:53:     Author: Joseph Coffland <[email protected]>
20:34:53:  Copyright: 2020 foldingathome.org
20:34:53:   Homepage: https://foldingathome.org/
20:34:53:       Date: Oct 20 2020
20:34:53:       Time: 13:39:56
20:34:53:   Revision: 6efbf0e138e22d3963e6a291f78dcb9c6422a278
20:34:53:     Branch: master
20:34:53:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
20:34:53:    Options: -std=c++11 -fsigned-char -O3 -funroll-loops
20:34:53:             -mmacosx-version-min=10.7 -Wno-unused-local-typedefs -stdlib=libc++
20:34:53:   Platform: darwin 19.2.0
20:34:53:       Bits: 64
20:34:53:       Mode: Release
20:34:53:     Config: /Library/Application Support/FAHClient/config.xml
20:34:53:******************************** CBang ********************************
20:34:53:       Date: Oct 20 2020
20:34:53:       Time: 11:39:07
20:34:53:   Revision: 7e4ce85225d7eaeb775e87c31740181ca603de60
20:34:53:     Branch: master
20:34:53:   Compiler: GNU 4.2.1 Compatible Apple LLVM 11.0.0 (clang-1100.0.33.8)
20:34:53:    Options: -std=c++11 -fsigned-char -O3 -funroll-loops
20:34:53:             -mmacosx-version-min=10.7 -Wno-unused-local-typedefs -stdlib=libc++
20:34:53:             -fPIC
20:34:53:   Platform: darwin 19.2.0
20:34:53:       Bits: 64
20:34:53:       Mode: Release
20:34:53:******************************* System ********************************
20:34:53:        CPU: Intel(R) Xeon(R) CPU X5570 @ 2.93GHz
20:34:53:     CPU ID: GenuineIntel Family 6 Model 26 Stepping 5
20:34:53:       CPUs: 16
20:34:53:     Memory: 12.00GiB
20:34:53:Free Memory: 9.76GiB
20:34:53:    Threads: POSIX_THREADS
20:34:53: OS Version: 10.7
20:34:53:Has Battery: false
20:34:53: On Battery: false
20:34:53: UTC Offset: -7
20:34:53:        PID: 890
20:34:53:        CWD: /Library/Application Support/FAHClient
20:34:53:         OS: Darwin 11.4.2 x86_64
20:34:53:    OS Arch: AMD64
20:34:53:       GPUs: 0
20:34:53:       CUDA: Not detected: Failed to open dynamic library 'libcuda.dylib':
20:34:53:             dlopen(libcuda.dylib, 1): image not found
20:34:53:     OpenCL: Not detected: Failed to open dynamic library 'libOpenCL.dylib':
20:34:53:             dlopen(libOpenCL.dylib, 1): image not found
20:34:53:***********************************************************************
20:34:53:<config>
20:34:53:  <!-- Network -->
20:34:53:  <proxy v=':8080'/>
20:34:53:
20:34:53:  <!-- Slot Control -->
20:34:53:  <power v='full'/>
20:34:53:
20:34:53:  <!-- User Information -->
20:34:53:  <passkey v='*****'/>
20:34:53:  <team v='246024'/>
20:34:53:  <user v='wingrider'/>
20:34:53:
20:34:53:  <!-- Folding Slots -->
20:34:53:  <slot id='0' type='CPU'/>
20:34:53:</config>
20:34:53:Trying to access database...
20:34:53:Successfully acquired database lock
20:34:53:FS00:Initialized folding slot 00: cpu:16
20:34:53:WARNING:WU00:Missing data files, dumping
20:34:53:WU00:FS00:Cleaning up
20:34:53:WU00:FS00:Connecting to assign1.foldingathome.org:80
20:34:54:WARNING:WU00:FS00:Failed to get assignment from 'assign1.foldingathome.org:80': No WUs available for this configuration
20:34:54:WU00:FS00:Connecting to assign2.foldingathome.org:80
20:34:55:WU00:FS00:Assigned to work server 178.174.196.138
20:34:55:WU00:FS00:Requesting new work unit for slot 00: cpu:16 from 178.174.196.138
20:34:55:WU00:FS00:Connecting to 178.174.196.138:8080
20:34:56:WU00:FS00:Downloading 1.88MiB
20:34:57:WU00:FS00:Download complete
20:34:57:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:16810 run:49 clone:835 gen:24 core:0xa8 unit:0x0000001ab2aec48a5eff263fffc989fb
20:34:57:WU00:FS00:Downloading core from http://cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah
20:34:57:WU00:FS00:Connecting to cores.foldingathome.org:80
20:34:57:WU00:FS00:FahCore a8: Downloading 5.70MiB
20:34:58:WU00:FS00:FahCore a8: Download complete
20:34:58:WU00:FS00:Valid core signature
20:34:58:WU00:FS00:Unpacked 14.16MiB to cores/cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah/FahCore_a8
20:34:58:WU00:FS00:Starting
20:34:58:WU00:FS00:Running FahCore: /usr/local/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah/FahCore_a8" -dir 00 -suffix 01 -version 706 -lifeline 890 -checkpoint 15 -np 16
20:34:58:WU00:FS00:Started FahCore on PID 891
20:34:58:WU00:FS00:Core PID:894
20:34:58:WU00:FS00:FahCore 0xa8 started
20:34:59:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
20:34:59:WU00:FS00:Starting
20:34:59:WU00:FS00:Running FahCore: /usr/local/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah/FahCore_a8" -dir 00 -suffix 01 -version 706 -lifeline 890 -checkpoint 15 -np 16
20:34:59:WU00:FS00:Started FahCore on PID 896
20:34:59:WU00:FS00:Core PID:897
20:34:59:WU00:FS00:FahCore 0xa8 started
20:35:00:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

[bruce]

Apparently the problem you're having is with FAHCore_a8 V0.0.8 which is being automatically installed/updated. (It has nothing to do with the client version. I'll be sure that the team that's developing FAHCore_a8 knows that starting a new WU causes it to immediately be INTERRUPTED. (102 = 0x66)

Code: Select all

20:31:07:WU00:FS00:Starting
20:31:07:WU00:FS00:Running FahCore: /usr/local/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/cores.foldingathome.org/osx/64bit-sse2/a8-0.0.8/Core_a8.fah/FahCore_a8" -dir 00 -suffix 01 -version 706 -lifeline 715 -checkpoint 15 -np 8
20:31:07:WU00:FS00:Started FahCore on PID 716
20:31:07:WU00:FS00:Core PID:719
20:31:07:WU00:FS00:FahCore 0xa8 started
20:31:07:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

[wingrider]

Apparently the problem you're having is with FAHCore_a8 V0.0.8 which is being automatically installed/updated. (It has nothing to do with the client version. I'll be sure that the team that's developing FAHCore_a8 knows that starting a new WU causes it to immediately be INTERRUPTED.

W o W.

*thank you* for the fast reply and feedback. Any work arounds come to mind ? Don't select "any" for now?

[bruce]

Sorry. I don't know if there are any work-arounds.

[bruce]

Now I'm confused. I've been told that FAHClient 7.6.13's FAHControl does work on macOS 10.14 1nd 10.15.

I guess I should avoid commenting here.

[wingrider]

Sorry. I don't know if there are any work-arounds.

Bummer. I can keep slogging for now since it's not on my side.
I'm not familiar with how these sorts of reports turn into fixes. This an Hours, Days, or weeks type of thing to investigate / resolve? I ask because it impacts 20 of my machines and just want to manage my mindset keeping after them.

[wingrider]

Now I'm confused. I've been told that FAHClient 7.6.13's FAHControl does work on macOS 10.14 1nd 10.15.

I guess I should avoid commenting here.

They are all on MacOS 10.7 and I moved almost all of them to Fah 7.6.21, but have earlier versions like 7.6.13 that didn't seem to matter.