What parts of a GPU card can be used for FAH?

Moderators: Site Moderators, FAHC Science Team

Post Reply
markdotgooley
Posts: 101
Joined: Tue Apr 21, 2020 11:46 am

What parts of a GPU card can be used for FAH?

Post by markdotgooley »

Are only the shaders useful? I'm assuming that e.g. ray-tracing hardware is not useful. What parts of a GPU can be used for computations?
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: What parts of a GPU card can be used for FAH?

Post by JimboPalmer »

Just the shaders, what Nvidia calls CUDA cores. They do both 32 bit and 64 bit FP math. Most of F@H uses 32 bit FP math but there are cases where the much slower 64 but FP math is needed.

The RT cores only do 16 bit FP math, not nearly accurate enough for F@H's algorithm.

And, of course the rasterizers are idle, as there is no image made.

RAM is not an issue for F@H, but the PCIE bus can slow the Card
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
markdotgooley
Posts: 101
Joined: Tue Apr 21, 2020 11:46 am

Re: What parts of a GPU card can be used for FAH?

Post by markdotgooley »

I’ve noticed that little GPU memory gets used and that PCIe bandwidth does matter, yes.

Pretty sure that nobody will make discount FAH cards using chips with defective RT hardware and about 2 Gb of memory...
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: What parts of a GPU card can be used for FAH?

Post by JimboPalmer »

Some 'bitcoin' cards are showing up on ebay.

No ports, just compute.

https://www.ebay.com/itm/ZOTAC-P106-90- ... 4224522436

https://www.ebay.com/itm/Gigabyte-p106- ... 3594695865

I don't endorse these auctions, just saying they exist.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: What parts of a GPU card can be used for FAH?

Post by toTOW »

Be careful, P106-90 is a 1050 ... P106-100 is a 1060 ...
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
markdotgooley
Posts: 101
Joined: Tue Apr 21, 2020 11:46 am

Re: What parts of a GPU card can be used for FAH?

Post by markdotgooley »

toTOW wrote:Be careful, P106-90 is a 1050 ... P106-100 is a 1060 ...
Yes. There are some Zotac (not a brand I trust) mining cards with P106 showing up on eBay under US$50 delivered, straight from China. Apparently 75W power. I don’t think they’re good PPD/watt, apart from everything else.
MeeLee
Posts: 1339
Joined: Tue Feb 19, 2019 10:16 pm

Re: What parts of a GPU card can be used for FAH?

Post by MeeLee »

markdotgooley wrote:
toTOW wrote:Be careful, P106-90 is a 1050 ... P106-100 is a 1060 ...
Yes. There are some Zotac (not a brand I trust) mining cards with P106 showing up on eBay under US$50 delivered, straight from China. Apparently 75W power. I don’t think they’re good PPD/watt, apart from everything else.
China is known to rebadge GPUs, that usually are lower than what they promote on their selling sites.
The 1060 variants, might be a 1050 with a flashed bios that just says it's a 1060.
You still get the performance of a 1050.
China really messed up the GTX line, and I wouldn't trust those for a hair.
All my GPUs come from North America, I always buy from known brands, and I always go back to the site for reference pictures, to make sure the brand and model, and specs are identical.
You may get a GPU with lots of lies on the spec sheet.
Post Reply